Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Swat33333]

All the same, how to run 11.8 on 7 nvidia 1080x6 and 1080Tix1 cards? Version 11.1 works and there is no version above.

Win 7 x 64
Memory 8Gb
Virtual memory 50 Gb
MSI Afterburner 4.5 (Tried versions 3.9, 4.0, 4.1 and so on - did not help)
Drivers 398.11(I tried the driver below - did not help)

What other options are available (except linux and win10)

[1714983623]

1714983623

[Jonet]

I've got 8 x rx580 on 2x750W PSU - 1.1kWh
6 x rx580 on 2x650W PSU - 0.9kWh

I've got GPu hangs everyday (also freeze windows) and read that PSU can fix it.
But is it possible with so much power left in PSUs?

If you GPU overclocked and there is no low voltage mod, I think your PSU overloaded. My overclocked 6x570 farms are running on 2x775W PSUs and it is now about PSU's limit I think.
It happened cuz 750W on PSU label does not give you efficiency of 100%.

Thank you for your reply.
I should also mention that all of them are Platinum so highest efficiency possible.

And usually in both is same card every time.

If they are undervolted and clocked sensible, and you are not dual mining, your PSUs are not the problem. Is 1.1 and 0.9 what you measure at he wall? If you know what GPU it is that hangs, lower its memclock. Have you used Hwinfo to see if any GPUs generate a lot of hardware errors?
A PSU can deliver its rated power and will pull more than that from the wall. You do not have to take the efficiency into account to find out what it can deliver. Running it close to 100% might not be a good idea tho.

[Bigdrago]

I've got 8 x rx580 on 2x750W PSU - 1.1kWh
6 x rx580 on 2x650W PSU - 0.9kWh

I've got GPu hangs everyday (also freeze windows) and read that PSU can fix it.
But is it possible with so much power left in PSUs?

Strange. I have 13x 570 (rig draws total 1550w) on 220v. Using 2x evga g2 1600w psu.

[tg88]

-> open the adrenaline control panel and change the settings from GRAPHICS to COMPUTE mode for EACH AMD CARD that you have. Reboot and recheck if compute mode is still enabled

You can use this tool, making it much easier:

https://bitcointalk.org/index.php?topic=2815803.0

[bitgameSolo]

made the move today on my win7 rig from claymore v10.1 to v11.8 and robinh00d driver to 18.6.1 drivers. There seems to be no love for new driver on my rx 470s. I'm going to try again after cleaning with DDU. But it should be good right? thx.

[informatuss]

I've got 8 x rx580 on 2x750W PSU - 1.1kWh
6 x rx580 on 2x650W PSU - 0.9kWh

I've got GPu hangs everyday (also freeze windows) and read that PSU can fix it.
But is it possible with so much power left in PSUs?

If you GPU overclocked and there is no low voltage mod, I think your PSU overloaded. My overclocked 6x570 farms are running on 2x775W PSUs and it is now about PSU's limit I think.
It happened cuz 750W on PSU label does not give you efficiency of 100%.

Thank you for your reply.
I should also mention that all of them are Platinum so highest efficiency possible.

And usually in both is same card every time.

If they are undervolted and clocked sensible, and you are not dual mining, your PSUs are not the problem. Is 1.1 and 0.9 what you measure at he wall? If you know what GPU it is that hangs, lower its memclock. Have you used Hwinfo to see if any GPUs generate a lot of hardware errors?
A PSU can deliver its rated power and will pull more than that from the wall. You do not have to take the efficiency into account to find out what it can deliver. Running it close to 100% might not be a good idea tho.

Yes, these reading are from wall.
Changing voltage and mmclock doesn't help with this problem. Checked so many times.

I've got 8 x rx580 on 2x750W PSU - 1.1kWh
6 x rx580 on 2x650W PSU - 0.9kWh

I've got GPu hangs everyday (also freeze windows) and read that PSU can fix it.
But is it possible with so much power left in PSUs?

Strange. I have 13x 570 (rig draws total 1550w) on 220v. Using 2x evga g2 1600w psu.

What voltage are you using? How you moded it?
You get ~30% lower power consumption, I would love to emulate this.

[phamthihien1999]

I had to run DDU to remove drivers and install BC drivers to get it work, it was no go for Adrenaline drivers (and AMD/ATI Pixel Clock Patcher).

[m0neymaker]

Please add the feature in addition to the -minspeed reboot by the number of video cards found in the system. When the graphics cards overheat the hashtate begin to decrease, especially in warm rooms, -r 1 reboot occurs. But sometimes not all GPUs are defined and for correct determination it is necessary to reboot the farm several times. By the way, I have a strange summary hashrate on version 11.8: all 7 GPUs 29MH/s, but summ shows only 160 + - and GPU farm restarts.

[DonValenteeno]

What is everyone getting for stock RX 470?  I been away from mining for a while, and I'm getting around 15Mh/s.  It seems low, but is the decrease due to the DAG file size?

No, you should be getting much more hashrate than that with your RX 470. At the very least, it should be getting you 23 Mh/s to 25 Mh/s. I'd suggest you to:

-reinstall drivers
-make sure that your graphics is not getting overheated and is staying below 88 degrees
-apply a bit of overclocking

BTW, are you using just one graphics card?

DAG FIX AMD drivers ver. 22.19.659.1? Memory overclocked to 1750 at least? BIOS re-flashed?

[carlo_0000]

Don't use the "blockchain beta" driver. It is already included on the latest AMD adrenaline drivers from amd.com/drivers. Please stop spreading old news!
-> go to amd.com/drivers and download the latest WHQL driver
-> open the adrenaline control panel and change the settings from GRAPHICS to COMPUTE mode for EACH AMD CARD that you have. Reboot and recheck if compute mode is still enabled
You should have more speed than using old blockchain driver that was created for testing purposes. Also it's the only driver that is fully compatible with windows 1803

 you sure? i did not test the last drivers for rx series

but i can say on vega the blockchain is at lease 5%  faster  than the adrenaline

[Euro1121]

Hi everyone,
I'm here because for the first time I'm trying to mine with claymore 11.8.
But unfortunately it crash on startup.
i had put my ethereum wallet address on start.bat.

ethDcrminer64.exe -epool eu1.ethermine.org:4444 -ewal "my address" -epsw x

before crashing on the screen it says:

ETH 2 pool are specified
Main ethereum pool is eu1.ethermine.org:4444
DCR: 0 Pool is specified


my system is:

z270gt6
intel celeron g3930
4gb ram
ssd120 gb
MSI gtx 1060 6gb OC

I already changed the paging file at 36000MB

updated Motherboard bios

downloaded and set MSI afterburner with:

POWER LIMIT: 65%
temp limit 85degrees not connected to power limit
CORE CLOCK 0
MEMORY CLOCK 480
FAN SPEED AUTO


any suggestion is welcome :-)

thank you in advance!!!!

[kgminer]

Hi everyone,
I'm here because for the first time I'm trying to mine with claymore 11.8.
But unfortunately it crash on startup.
i had put my ethereum wallet address on start.bat.

ethDcrminer64.exe -epool eu1.ethermine.org:4444 -ewal "my address" -epsw x

before crashing on the screen it says:

ETH 2 pool are specified
Main ethereum pool is eu1.ethermine.org:4444
DCR: 0 Pool is specified


my system is:

z270gt6
intel celeron g3930
4gb ram
ssd120 gb
MSI gtx 1060 6gb OC

I already changed the paging file at 36000MB

updated Motherboard bios

downloaded and set MSI afterburner with:

POWER LIMIT: 65%
temp limit 85degrees not connected to power limit
CORE CLOCK 0
MEMORY CLOCK 480
FAN SPEED AUTO


any suggestion is welcome :-)

thank you in advance!!!!

Copy\paste log file here.
Are you mining on windows or Linux? if windows what is the windows version?

[ermis1975]

I have AMD and Nvidia cards in the same ring. AMD settings are ok. What I have to change to "start file" for NVIDIA? Can I control NVIDIA clocks etc from there like amd?

[Bit_fan_talks]

at last
now i can use only MS RDC

tnx

[Euro1121]

Hi everyone,
I'm here because for the first time I'm trying to mine with claymore 11.8.
But unfortunately it crash on startup.
i had put my ethereum wallet address on start.bat.

ethDcrminer64.exe -epool eu1.ethermine.org:4444 -ewal "my address" -epsw x

before crashing on the screen it says:

ETH 2 pool are specified
Main ethereum pool is eu1.ethermine.org:4444
DCR: 0 Pool is specified


my system is:

z270gt6
intel celeron g3930
4gb ram
ssd120 gb
MSI gtx 1060 6gb OC

I already changed the paging file at 36000MB

updated Motherboard bios

downloaded and set MSI afterburner with:

POWER LIMIT: 65%
temp limit 85degrees not connected to power limit
CORE CLOCK 0
MEMORY CLOCK 480
FAN SPEED AUTO


any suggestion is welcome :-)

thank you in advance!!!!

Copy\paste log file here.
Are you mining on windows or Linux? if windows what is the windows version?

this is the log

01:17:14:960  1830  Check and remove old log files...
01:17:14:960  1830  args: -epool eu1.ethermine.org:4444 -ewal 0xa4a1b5803ba8d8f04Dff2F6C6Dd9f6b16e8b10A4 -epsw x
01:17:14:960  1830 
01:17:14:960  1830  …ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕª
01:17:14:960  1830  ∫                Claymore's Dual GPU Miner - v11.8               ∫
01:17:14:960  1830  ∫              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             ∫
01:17:14:960  1830  »ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕº
01:17:14:960  1830 
01:17:14:960  1830  b591
01:17:15:179  1830  ETH: 2 pools are specified
01:17:15:179  1830  Main Ethereum pool is eu1.ethermine.org:4444
01:17:15:179  1830  DCR: 0 pool is specified

[Bulltime]

Please, no one of you is mining ethereum with nvidia through Ethermine in win 10?.
I need someone to help me, none of the versions of Claymore work.

Complete system specs including whats loaded on your HDD.SSD

Then what issues are you running in to first to last.

[mehudi]

Hi all,

after upgrading to Claymore 11.8 some of my rigs started restarting every 10 min or so. i've reinstalled drivers, checked connections.

i keep  getting message in the log file that he GPUx has failed openGL and then 'server: accept failed with error: 10004'

i've got RX480 cards with 4 mb ram.

please help.

tbia

[castillojim]

Have problems with ethpill and 1080s with Claymore.  Any solution yet?

[Roadrage68]

Hi everyone,
I'm here because for the first time I'm trying to mine with claymore 11.8.
But unfortunately it crash on startup.
i had put my ethereum wallet address on start.bat.

ethDcrminer64.exe -epool eu1.ethermine.org:4444 -ewal "my address" -epsw x

before crashing on the screen it says:

ETH 2 pool are specified
Main ethereum pool is eu1.ethermine.org:4444
DCR: 0 Pool is specified


my system is:

z270gt6
intel celeron g3930
4gb ram
ssd120 gb
MSI gtx 1060 6gb OC

I already changed the paging file at 36000MB

updated Motherboard bios

downloaded and set MSI afterburner with:

POWER LIMIT: 65%
temp limit 85degrees not connected to power limit
CORE CLOCK 0
MEMORY CLOCK 480
FAN SPEED AUTO


any suggestion is welcome :-)

thank you in advance!!!!

Copy\paste log file here.
Are you mining on windows or Linux? if windows what is the windows version?

this is the log

01:17:14:960  1830  Check and remove old log files...
01:17:14:960  1830  args: -epool eu1.ethermine.org:4444 -ewal 0xa4a1b5803ba8d8f04Dff2F6C6Dd9f6b16e8b10A4 -epsw x
01:17:14:960  1830 
01:17:14:960  1830  …ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕª
01:17:14:960  1830  ∫                Claymore's Dual GPU Miner - v11.8               ∫
01:17:14:960  1830  ∫              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             ∫
01:17:14:960  1830  »ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕº
01:17:14:960  1830 
01:17:14:960  1830  b591
01:17:15:179  1830  ETH: 2 pools are specified
01:17:15:179  1830  Main Ethereum pool is eu1.ethermine.org:4444
01:17:15:179  1830  DCR: 0 pool is specified

Check your dpools.txt? And your epools.txt while you are at it..
Looks like something in this file may be active, no # in front of line..

[TigTex]

Don't use the "blockchain beta" driver. It is already included on the latest AMD adrenaline drivers from amd.com/drivers. Please stop spreading old news!
-> go to amd.com/drivers and download the latest WHQL driver
-> open the adrenaline control panel and change the settings from GRAPHICS to COMPUTE mode for EACH AMD CARD that you have. Reboot and recheck if compute mode is still enabled
You should have more speed than using old blockchain driver that was created for testing purposes. Also it's the only driver that is fully compatible with windows 1803

 you sure? i did not test the last drivers for rx series

but i can say on vega the blockchain is at lease 5%  faster  than the adrenaline

With RX580, adrenaline is faster than the blockchain drivers (<1%, minimal gains on ETH). No idea about the vega's