Jonet
Jr. Member
Offline
Activity: 82
Merit: 3
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 21, 2018, 09:35:54 PM |
|
I've got 8 x rx580 on 2x750W PSU - 1.1kWh 6 x rx580 on 2x650W PSU - 0.9kWh
I've got GPu hangs everyday (also freeze windows) and read that PSU can fix it. But is it possible with so much power left in PSUs?
If you GPU overclocked and there is no low voltage mod, I think your PSU overloaded. My overclocked 6x570 farms are running on 2x775W PSUs and it is now about PSU's limit I think. It happened cuz 750W on PSU label does not give you efficiency of 100%. Thank you for your reply. I should also mention that all of them are Platinum so highest efficiency possible. And usually in both is same card every time. If they are undervolted and clocked sensible, and you are not dual mining, your PSUs are not the problem. Is 1.1 and 0.9 what you measure at he wall? If you know what GPU it is that hangs, lower its memclock. Have you used Hwinfo to see if any GPUs generate a lot of hardware errors? A PSU can deliver its rated power and will pull more than that from the wall. You do not have to take the efficiency into account to find out what it can deliver. Running it close to 100% might not be a good idea tho.
|
|
|
|
Bigdrago
Newbie
Offline
Activity: 312
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 21, 2018, 10:11:34 PM |
|
I've got 8 x rx580 on 2x750W PSU - 1.1kWh 6 x rx580 on 2x650W PSU - 0.9kWh
I've got GPu hangs everyday (also freeze windows) and read that PSU can fix it. But is it possible with so much power left in PSUs?
Strange. I have 13x 570 (rig draws total 1550w) on 220v. Using 2x evga g2 1600w psu.
|
|
|
|
tg88
Legendary
Offline
Activity: 2492
Merit: 1425
Payment Gateway Allows Recurring Payments
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 21, 2018, 11:38:36 PM |
|
-> open the adrenaline control panel and change the settings from GRAPHICS to COMPUTE mode for EACH AMD CARD that you have. Reboot and recheck if compute mode is still enabled
You can use this tool, making it much easier: https://bitcointalk.org/index.php?topic=2815803.0
|
|
|
|
bitgameSolo
Newbie
Offline
Activity: 32
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 22, 2018, 01:14:14 AM |
|
made the move today on my win7 rig from claymore v10.1 to v11.8 and robinh00d driver to 18.6.1 drivers. There seems to be no love for new driver on my rx 470s. I'm going to try again after cleaning with DDU. But it should be good right? thx.
|
|
|
|
informatuss
Newbie
Offline
Activity: 36
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 22, 2018, 05:58:45 AM |
|
I've got 8 x rx580 on 2x750W PSU - 1.1kWh 6 x rx580 on 2x650W PSU - 0.9kWh
I've got GPu hangs everyday (also freeze windows) and read that PSU can fix it. But is it possible with so much power left in PSUs?
If you GPU overclocked and there is no low voltage mod, I think your PSU overloaded. My overclocked 6x570 farms are running on 2x775W PSUs and it is now about PSU's limit I think. It happened cuz 750W on PSU label does not give you efficiency of 100%. Thank you for your reply. I should also mention that all of them are Platinum so highest efficiency possible. And usually in both is same card every time. If they are undervolted and clocked sensible, and you are not dual mining, your PSUs are not the problem. Is 1.1 and 0.9 what you measure at he wall? If you know what GPU it is that hangs, lower its memclock. Have you used Hwinfo to see if any GPUs generate a lot of hardware errors? A PSU can deliver its rated power and will pull more than that from the wall. You do not have to take the efficiency into account to find out what it can deliver. Running it close to 100% might not be a good idea tho. Yes, these reading are from wall. Changing voltage and mmclock doesn't help with this problem. Checked so many times. I've got 8 x rx580 on 2x750W PSU - 1.1kWh 6 x rx580 on 2x650W PSU - 0.9kWh
I've got GPu hangs everyday (also freeze windows) and read that PSU can fix it. But is it possible with so much power left in PSUs?
Strange. I have 13x 570 (rig draws total 1550w) on 220v. Using 2x evga g2 1600w psu. What voltage are you using? How you moded it? You get ~30% lower power consumption, I would love to emulate this.
|
|
|
|
phamthihien1999
Newbie
Offline
Activity: 56
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 22, 2018, 04:11:49 PM |
|
I had to run DDU to remove drivers and install BC drivers to get it work, it was no go for Adrenaline drivers (and AMD/ATI Pixel Clock Patcher).
|
|
|
|
m0neymaker
Newbie
Offline
Activity: 7
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 22, 2018, 08:35:18 PM |
|
Please add the feature in addition to the -minspeed reboot by the number of video cards found in the system. When the graphics cards overheat the hashtate begin to decrease, especially in warm rooms, -r 1 reboot occurs. But sometimes not all GPUs are defined and for correct determination it is necessary to reboot the farm several times. By the way, I have a strange summary hashrate on version 11.8: all 7 GPUs 29MH/s, but summ shows only 160 + - and GPU farm restarts.
|
|
|
|
DonValenteeno
Jr. Member
Offline
Activity: 103
Merit: 2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 22, 2018, 09:35:06 PM |
|
What is everyone getting for stock RX 470? I been away from mining for a while, and I'm getting around 15Mh/s. It seems low, but is the decrease due to the DAG file size?
No, you should be getting much more hashrate than that with your RX 470. At the very least, it should be getting you 23 Mh/s to 25 Mh/s. I'd suggest you to: -reinstall drivers -make sure that your graphics is not getting overheated and is staying below 88 degrees -apply a bit of overclocking BTW, are you using just one graphics card? DAG FIX AMD drivers ver. 22.19.659.1? Memory overclocked to 1750 at least? BIOS re-flashed?
|
|
|
|
carlo_0000
Legendary
Offline
Activity: 1281
Merit: 1003
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 22, 2018, 09:53:50 PM |
|
Don't use the "blockchain beta" driver. It is already included on the latest AMD adrenaline drivers from amd.com/drivers. Please stop spreading old news! -> go to amd.com/drivers and download the latest WHQL driver -> open the adrenaline control panel and change the settings from GRAPHICS to COMPUTE mode for EACH AMD CARD that you have. Reboot and recheck if compute mode is still enabled You should have more speed than using old blockchain driver that was created for testing purposes. Also it's the only driver that is fully compatible with windows 1803
you sure? i did not test the last drivers for rx series but i can say on vega the blockchain is at lease 5% faster than the adrenaline
|
|
|
|
Euro1121
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 22, 2018, 11:22:36 PM |
|
Hi everyone, I'm here because for the first time I'm trying to mine with claymore 11.8. But unfortunately it crash on startup. i had put my ethereum wallet address on start.bat.
ethDcrminer64.exe -epool eu1.ethermine.org:4444 -ewal "my address" -epsw x
before crashing on the screen it says:
ETH 2 pool are specified Main ethereum pool is eu1.ethermine.org:4444 DCR: 0 Pool is specified
my system is:
z270gt6 intel celeron g3930 4gb ram ssd120 gb MSI gtx 1060 6gb OC
I already changed the paging file at 36000MB
updated Motherboard bios
downloaded and set MSI afterburner with:
POWER LIMIT: 65% temp limit 85degrees not connected to power limit CORE CLOCK 0 MEMORY CLOCK 480 FAN SPEED AUTO
any suggestion is welcome :-)
thank you in advance!!!!
|
|
|
|
kgminer
Jr. Member
Offline
Activity: 100
Merit: 6
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 22, 2018, 11:31:23 PM |
|
Hi everyone, I'm here because for the first time I'm trying to mine with claymore 11.8. But unfortunately it crash on startup. i had put my ethereum wallet address on start.bat.
ethDcrminer64.exe -epool eu1.ethermine.org:4444 -ewal "my address" -epsw x
before crashing on the screen it says:
ETH 2 pool are specified Main ethereum pool is eu1.ethermine.org:4444 DCR: 0 Pool is specified
my system is:
z270gt6 intel celeron g3930 4gb ram ssd120 gb MSI gtx 1060 6gb OC
I already changed the paging file at 36000MB
updated Motherboard bios
downloaded and set MSI afterburner with:
POWER LIMIT: 65% temp limit 85degrees not connected to power limit CORE CLOCK 0 MEMORY CLOCK 480 FAN SPEED AUTO
any suggestion is welcome :-)
thank you in advance!!!!
Copy\paste log file here. Are you mining on windows or Linux? if windows what is the windows version?
|
|
|
|
ermis1975
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 198
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2018, 05:42:22 AM |
|
I have AMD and Nvidia cards in the same ring. AMD settings are ok. What I have to change to "start file" for NVIDIA? Can I control NVIDIA clocks etc from there like amd?
|
|
|
|
Bit_fan_talks
Jr. Member
Offline
Activity: 121
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2018, 12:57:14 PM |
|
at last now i can use only MS RDC
tnx
|
|
|
|
Euro1121
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2018, 02:05:31 PM |
|
Hi everyone, I'm here because for the first time I'm trying to mine with claymore 11.8. But unfortunately it crash on startup. i had put my ethereum wallet address on start.bat.
ethDcrminer64.exe -epool eu1.ethermine.org:4444 -ewal "my address" -epsw x
before crashing on the screen it says:
ETH 2 pool are specified Main ethereum pool is eu1.ethermine.org:4444 DCR: 0 Pool is specified
my system is:
z270gt6 intel celeron g3930 4gb ram ssd120 gb MSI gtx 1060 6gb OC
I already changed the paging file at 36000MB
updated Motherboard bios
downloaded and set MSI afterburner with:
POWER LIMIT: 65% temp limit 85degrees not connected to power limit CORE CLOCK 0 MEMORY CLOCK 480 FAN SPEED AUTO
any suggestion is welcome :-)
thank you in advance!!!!
Copy\paste log file here. Are you mining on windows or Linux? if windows what is the windows version? this is the log 01:17:14:960 1830 Check and remove old log files... 01:17:14:960 1830 args: -epool eu1.ethermine.org:4444 -ewal 0xa4a1b5803ba8d8f04Dff2F6C6Dd9f6b16e8b10A4 -epsw x 01:17:14:960 1830 01:17:14:960 1830 …ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕª 01:17:14:960 1830 ∫ Claymore's Dual GPU Miner - v11.8 ∫ 01:17:14:960 1830 ∫ ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK ∫ 01:17:14:960 1830 »ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕº 01:17:14:960 1830 01:17:14:960 1830 b591 01:17:15:179 1830 ETH: 2 pools are specified 01:17:15:179 1830 Main Ethereum pool is eu1.ethermine.org:4444 01:17:15:179 1830 DCR: 0 pool is specified
|
|
|
|
Bulltime
Newbie
Offline
Activity: 8
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2018, 03:33:31 PM |
|
Please, no one of you is mining ethereum with nvidia through Ethermine in win 10?. I need someone to help me, none of the versions of Claymore work.
Complete system specs including whats loaded on your HDD.SSD Then what issues are you running in to first to last.
|
|
|
|
mehudi
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2018, 05:03:50 PM |
|
Hi all,
after upgrading to Claymore 11.8 some of my rigs started restarting every 10 min or so. i've reinstalled drivers, checked connections.
i keep getting message in the log file that he GPUx has failed openGL and then 'server: accept failed with error: 10004'
i've got RX480 cards with 4 mb ram.
please help.
tbia
|
|
|
|
castillojim
Newbie
Offline
Activity: 17
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2018, 08:10:13 PM |
|
Have problems with ethpill and 1080s with Claymore. Any solution yet?
|
|
|
|
Roadrage68
Newbie
Offline
Activity: 24
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2018, 08:16:02 PM |
|
Hi everyone, I'm here because for the first time I'm trying to mine with claymore 11.8. But unfortunately it crash on startup. i had put my ethereum wallet address on start.bat.
ethDcrminer64.exe -epool eu1.ethermine.org:4444 -ewal "my address" -epsw x
before crashing on the screen it says:
ETH 2 pool are specified Main ethereum pool is eu1.ethermine.org:4444 DCR: 0 Pool is specified
my system is:
z270gt6 intel celeron g3930 4gb ram ssd120 gb MSI gtx 1060 6gb OC
I already changed the paging file at 36000MB
updated Motherboard bios
downloaded and set MSI afterburner with:
POWER LIMIT: 65% temp limit 85degrees not connected to power limit CORE CLOCK 0 MEMORY CLOCK 480 FAN SPEED AUTO
any suggestion is welcome :-)
thank you in advance!!!!
Copy\paste log file here. Are you mining on windows or Linux? if windows what is the windows version? this is the log 01:17:14:960 1830 Check and remove old log files... 01:17:14:960 1830 args: -epool eu1.ethermine.org:4444 -ewal 0xa4a1b5803ba8d8f04Dff2F6C6Dd9f6b16e8b10A4 -epsw x 01:17:14:960 1830 01:17:14:960 1830 …ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕª 01:17:14:960 1830 ∫ Claymore's Dual GPU Miner - v11.8 ∫ 01:17:14:960 1830 ∫ ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK ∫ 01:17:14:960 1830 »ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕº 01:17:14:960 1830 01:17:14:960 1830 b591 01:17:15:179 1830 ETH: 2 pools are specified 01:17:15:179 1830 Main Ethereum pool is eu1.ethermine.org:4444 01:17:15:179 1830 DCR: 0 pool is specified Check your dpools.txt? And your epools.txt while you are at it.. Looks like something in this file may be active, no # in front of line..
|
|
|
|
TigTex
Jr. Member
Offline
Activity: 55
Merit: 5
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2018, 08:59:40 PM |
|
Don't use the "blockchain beta" driver. It is already included on the latest AMD adrenaline drivers from amd.com/drivers. Please stop spreading old news! -> go to amd.com/drivers and download the latest WHQL driver -> open the adrenaline control panel and change the settings from GRAPHICS to COMPUTE mode for EACH AMD CARD that you have. Reboot and recheck if compute mode is still enabled You should have more speed than using old blockchain driver that was created for testing purposes. Also it's the only driver that is fully compatible with windows 1803
you sure? i did not test the last drivers for rx series but i can say on vega the blockchain is at lease 5% faster than the adrenaline With RX580, adrenaline is faster than the blockchain drivers (<1%, minimal gains on ETH). No idea about the vega's
|
.::. TigTex .::. Good luck! Have a nice hash
|
|
|
davidzai
Newbie
Offline
Activity: 23
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2018, 05:03:10 AM |
|
Anyone experience hashrate drop?
I am using GTX1070ti x 6 mining ETC at etc.ethermine.org. Already 1 week plus my average hashrate was 190mh/s. But since 13 hours ago, my average hashrate drop to 160mh/s.
Already restarted the rig, still the same... Running my rig on smos with claymore v11.8
|
|
|
|
|