kgminer
Jr. Member
Offline
Activity: 100
Merit: 6
|
|
June 26, 2018, 12:28:14 PM |
|
Is the next version due soon? Claymore seems to be not around as much these days?
he is super rich now and planning to retire..
|
|
|
|
Kryon
|
|
June 26, 2018, 12:29:02 PM |
|
1070 in stock v 11.8 how fast?
|
|
|
|
hugomenezes
Newbie
Offline
Activity: 6
Merit: 0
|
|
June 26, 2018, 05:20:37 PM |
|
I dont know why my Claymore i only get 22mh/s. I try all steps and still the same. When i try change the GPU and MEM frenquency the mh/s still the same. Its strange! Hi all, I need some help to resolve a problem on my Rig. My Specs is: Motherboard: ASUS B250 Miner Expert with lastest bios RAM: 4GB HDD:320GB CPU: G4400 VGA: MSI RX580 Armor 8GB + Gigabyte RX580 Gaming 8GB PSU: 2000W Miner: Claymore 11.8 OS: Windows 10 Pro
I had Windows 10 with all updates, the drivers all updated and my problem is the mh/s speed, i only get 22mh/s i try to put diferent clocks speed on GPU and RAM but the result its the same 22mh/s. I build other RIG with the same hardware and i get 30mh/s on RX580 with clocks GPU 1250Mhz 0.950v RAM 2150Mhz 0.950v.
Anyone had this problem? Sry for my poor english.
Regards
Did you switch your gpu workload from graphics to compute? In Claymore 11.6 or newer you can: press "y" key to turn on "Compute Mode" in AMD drivers for all cardsThat could be the problem.
|
|
|
|
promomei
|
|
June 26, 2018, 05:36:56 PM |
|
Hi guys anybody know what is going on on ethermine ETC pool its 3 different deposit addresses every day this happens two times https://imgur.com/a/NBxutVf
|
|
|
|
promomei
|
|
June 26, 2018, 05:47:26 PM |
|
Hi, I get ETC, sometimes my rig reboots, and Claymor's log comes to an end with the line NULNULNUL... Sometimes one hour, and sometimes works and 30, I can't understand in what the reason. Somebody knows that he means if the ravine comes to an end with NULNULNUL... Have you tried to re-download claymore? Are you using the latest version? Maybe try another version and check if it gives you the same error... Have you checked if you are using the right drivers? everybody has same problem - just go check random address on etc ethermine org pool cant understand this also mining ETH is no problem mining ETC is problem with same tools looks like some kind of attack in ETC
|
|
|
|
Jeeperz74
Newbie
Offline
Activity: 14
Merit: 0
|
|
June 26, 2018, 06:38:45 PM |
|
Hi guys anybody know what is going on on ethermine ETC pool its 3 different deposit addresses every day this happens two times https://imgur.com/a/NBxutVfI been having problems with the ETC pool there too. I mine ETH just fine but when I switch to ETC it gives me the same problems.
|
|
|
|
nikdd
Newbie
Offline
Activity: 1
Merit: 0
|
|
June 26, 2018, 06:40:24 PM |
|
Why I cannot use Nvidia GTX 970 cards at full speed (18-22mh) instead of 3-6mh? I was tried so many solutions. I tested on Win7 and Simplemining ubuntu editions. In rare cases on win7 sometimes cards start mining at 17-18mh but in short time speed degrades to 3-4mh. Thank You in advance.
|
|
|
|
androstan1234
Jr. Member
Offline
Activity: 251
Merit: 6
|
|
June 26, 2018, 07:08:07 PM |
|
It looks like the miner hangs when switching to devfee mining: ETH - Total Speed: 402.153 Mh/s, Total Shares: 332, Rejected: 0, Time: 01:06 ETH: GPU0 29.765 Mh/s, GPU1 30.986 Mh/s, GPU2 30.675 Mh/s, GPU3 30.431 Mh/s, GPU4 29.839 Mh/s, GPU5 29.084 Mh/s, GPU6 30.319 Mh/s, GPU7 29.837 Mh/s, GPU8 30.286 Mh/s, GPU9 30.216 Mh/s, GPU10 50.664 Mh/s, GPU11 50.050 Mh/s GPU0 t=75C fan=100%, GPU1 t=73C fan=100%, GPU2 t=72C fan=100%, GPU3 t=67C fan=100%, GPU4 t=65C fan=59%, GPU5 t=68C fan=61%, GPU6 t=72C fan=100%, GPU7 t=75C fan=100%, GPU8 t=67C fan=44%, GPU9 t=66C fan=31%; GPU10 t=64C fan=40%, GPU11 t=67C fan=45% ETH: 06/26/18-11:37:34 - SHARE FOUND - (GPU 11) (DIFF: 9.114G) ETH: Share accepted (109 ms)! GPU #0: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 1:0:0) GPU #1: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 2:0:0) GPU #2: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 3:0:0) GPU #3: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 4:0:0) GPU #4: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 5:0:0) GPU #5: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 7:0:0) GPU #6: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 8:0:0) GPU #7: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 9:0:0) GPU #8: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 10:0:0) GPU #9: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 11:0:0) GPU #10: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1 (pci bus 12:0:0) GPU #11: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1 (pci bus 13:0:0) ETH - Total Speed: 402.169 Mh/s, Total Shares: 333(33+22+30+21+28+23+23+25+21+21+37+49), Rejected: 0(0+0+0+0+0+0+0+0+0+0+0+0), Time: 01:06 ETH: GPU0 29.756 Mh/s, GPU1 30.996 Mh/s, GPU2 30.673 Mh/s, GPU3 30.417 Mh/s, GPU4 29.860 Mh/s, GPU5 29.126 Mh/s, GPU6 30.232 Mh/s, GPU7 30.252 Mh/s, GPU8 30.238 Mh/s, GPU9 30.201 Mh/s, GPU10 50.376 Mh/s, GPU11 50.043 Mh/s Incorrect ETH shares: none 1 minute average ETH total speed: 402.443 Mh/s Pool switches: ETH - 0 Current ETH share target: 0x00000000ffb34c02 (diff: 4300MH), epoch 195(2.52GB) Max ETH share diff found: 97.799T Current -dcri values: -dcri 8,10,8,18,20,10,8,10,8,12,30,30 GPU0 t=75C fan=100%, GPU1 t=73C fan=100%, GPU2 t=73C fan=100%, GPU3 t=67C fan=100%, GPU4 t=65C fan=59%, GPU5 t=68C fan=61%, GPU6 t=72C fan=100%, GPU7 t=74C fan=100%, GPU8 t=67C fan=44%, GPU9 t=66C fan=31%; GPU10 t=64C fan=40%, GPU11 t=67C fan=45% ETH: 06/26/18-11:37:55 - SHARE FOUND - (GPU 5) (DIFF: 14.889G) DevFee: ETH: Stratum - connecting to 'eth-eu.dwarfpool.com' <91.134.50.158> port 8008 (unsecure) Minimal speed ("-minspeed" option) was set to 370 MH/s. Miner cannot reach this speed for 5 minutes, need to restart miner! ETH: Connection lost, retry in 5 sec... GPU #0: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 1:0:0) GPU #1: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 2:0:0) GPU #2: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 3:0:0) GPU #3: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 4:0:0) GPU #4: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 5:0:0) GPU #5: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 7:0:0) GPU #6: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 8:0:0) GPU #7: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 9:0:0) GPU #8: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 10:0:0) GPU #9: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 11:0:0) GPU #10: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1 (pci bus 12:0:0) GPU #11: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1 (pci bus 13:0:0) ETH - Total Speed: 220.363 Mh/s, Total Shares: 334(33+22+30+21+29+25+23+25+22+23+38+50), Rejected: 0(0+0+0+0+0+0+0+0+0+0+0+0), Time: 01:25 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 29.869 Mh/s, GPU5 29.087 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s, GPU8 30.337 Mh/s, GPU9 30.200 Mh/s, GPU10 50.549 Mh/s, GPU11 50.321 Mh/s Incorrect ETH shares: none 1 minute average ETH total speed: 220.493 Mh/s Pool switches: ETH - 0 Max ETH share diff found: 97.799T Current -dcri values: -dcri 8,10,8,18,20,10,8,10,8,12,30,30 DevFee: ETH: Stratum - Connected (eth-eu.dwarfpool.com:8008) (unsecure) Any idea how to prevent this?
|
|
|
|
gooppoop
Newbie
Offline
Activity: 11
Merit: 0
|
|
June 26, 2018, 09:00:03 PM |
|
It looks like the miner hangs when switching to devfee mining: ETH - Total Speed: 402.153 Mh/s, Total Shares: 332, Rejected: 0, Time: 01:06 ETH: GPU0 29.765 Mh/s, GPU1 30.986 Mh/s, GPU2 30.675 Mh/s, GPU3 30.431 Mh/s, GPU4 29.839 Mh/s, GPU5 29.084 Mh/s, GPU6 30.319 Mh/s, GPU7 29.837 Mh/s, GPU8 30.286 Mh/s, GPU9 30.216 Mh/s, GPU10 50.664 Mh/s, GPU11 50.050 Mh/s GPU0 t=75C fan=100%, GPU1 t=73C fan=100%, GPU2 t=72C fan=100%, GPU3 t=67C fan=100%, GPU4 t=65C fan=59%, GPU5 t=68C fan=61%, GPU6 t=72C fan=100%, GPU7 t=75C fan=100%, GPU8 t=67C fan=44%, GPU9 t=66C fan=31%; GPU10 t=64C fan=40%, GPU11 t=67C fan=45% ETH: 06/26/18-11:37:34 - SHARE FOUND - (GPU 11) (DIFF: 9.114G) ETH: Share accepted (109 ms)! GPU #0: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 1:0:0) GPU #1: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 2:0:0) GPU #2: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 3:0:0) GPU #3: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 4:0:0) GPU #4: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 5:0:0) GPU #5: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 7:0:0) GPU #6: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 8:0:0) GPU #7: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 9:0:0) GPU #8: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 10:0:0) GPU #9: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 11:0:0) GPU #10: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1 (pci bus 12:0:0) GPU #11: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1 (pci bus 13:0:0) ETH - Total Speed: 402.169 Mh/s, Total Shares: 333(33+22+30+21+28+23+23+25+21+21+37+49), Rejected: 0(0+0+0+0+0+0+0+0+0+0+0+0), Time: 01:06 ETH: GPU0 29.756 Mh/s, GPU1 30.996 Mh/s, GPU2 30.673 Mh/s, GPU3 30.417 Mh/s, GPU4 29.860 Mh/s, GPU5 29.126 Mh/s, GPU6 30.232 Mh/s, GPU7 30.252 Mh/s, GPU8 30.238 Mh/s, GPU9 30.201 Mh/s, GPU10 50.376 Mh/s, GPU11 50.043 Mh/s Incorrect ETH shares: none 1 minute average ETH total speed: 402.443 Mh/s Pool switches: ETH - 0 Current ETH share target: 0x00000000ffb34c02 (diff: 4300MH), epoch 195(2.52GB) Max ETH share diff found: 97.799T Current -dcri values: -dcri 8,10,8,18,20,10,8,10,8,12,30,30 GPU0 t=75C fan=100%, GPU1 t=73C fan=100%, GPU2 t=73C fan=100%, GPU3 t=67C fan=100%, GPU4 t=65C fan=59%, GPU5 t=68C fan=61%, GPU6 t=72C fan=100%, GPU7 t=74C fan=100%, GPU8 t=67C fan=44%, GPU9 t=66C fan=31%; GPU10 t=64C fan=40%, GPU11 t=67C fan=45% ETH: 06/26/18-11:37:55 - SHARE FOUND - (GPU 5) (DIFF: 14.889G) DevFee: ETH: Stratum - connecting to 'eth-eu.dwarfpool.com' <91.134.50.158> port 8008 (unsecure) Minimal speed ("-minspeed" option) was set to 370 MH/s. Miner cannot reach this speed for 5 minutes, need to restart miner! ETH: Connection lost, retry in 5 sec... GPU #0: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 1:0:0) GPU #1: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 2:0:0) GPU #2: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 3:0:0) GPU #3: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 4:0:0) GPU #4: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 5:0:0) GPU #5: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 7:0:0) GPU #6: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 8:0:0) GPU #7: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 9:0:0) GPU #8: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 10:0:0) GPU #9: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 11:0:0) GPU #10: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1 (pci bus 12:0:0) GPU #11: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1 (pci bus 13:0:0) ETH - Total Speed: 220.363 Mh/s, Total Shares: 334(33+22+30+21+29+25+23+25+22+23+38+50), Rejected: 0(0+0+0+0+0+0+0+0+0+0+0+0), Time: 01:25 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 29.869 Mh/s, GPU5 29.087 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s, GPU8 30.337 Mh/s, GPU9 30.200 Mh/s, GPU10 50.549 Mh/s, GPU11 50.321 Mh/s Incorrect ETH shares: none 1 minute average ETH total speed: 220.493 Mh/s Pool switches: ETH - 0 Max ETH share diff found: 97.799T Current -dcri values: -dcri 8,10,8,18,20,10,8,10,8,12,30,30 DevFee: ETH: Stratum - Connected (eth-eu.dwarfpool.com:8008) (unsecure) Any idea how to prevent this? Remove "-minspeed" option
|
|
|
|
UnknownTraders
Newbie
Offline
Activity: 56
Merit: 0
|
|
June 26, 2018, 10:30:21 PM |
|
GPU hangs are usually due to running them faster than what the manufacturer has approved, principally on the memory or too much undervolt for that card. What may help is draining all the power from the condenser which also helps reset the GPU's and extenders after a crash. Switch off the gear, cut off the power to the power supply unit via the switch on the back and press the power button to drain all the power. Then wait about two minutes before turning it back on.
|
|
|
|
Jeeperz74
Newbie
Offline
Activity: 14
Merit: 0
|
|
June 27, 2018, 01:24:18 AM |
|
Looks like my problems mining ETC have gone away. It must of been a pool problem and the miner is running smoothly now.
|
|
|
|
bigdaddymccarron
Member
Offline
Activity: 71
Merit: 20
|
|
June 27, 2018, 02:02:14 AM |
|
@bigdaddymccarron, could it be your swap file is not big enough for the DAG files? I'm no expert on Ubuntu, but sometimes we overlook the simplest things.
I will check that, I saw something the other day that indicated it should be 22 gb.
|
|
|
|
DireWolfM14
Copper Member
Legendary
Offline
Activity: 2296
Merit: 4465
Join the world-leading crypto sportsbook NOW!
|
|
June 27, 2018, 02:18:30 AM |
|
A reliable source recommends 2.6gb per card, plus another 10 or 12. @bigdaddymccarron, could it be your swap file is not big enough for the DAG files? I'm no expert on Ubuntu, but sometimes we overlook the simplest things.
I will check that, I saw something the other day that indicated it should be 22 gb.
|
|
|
|
skyline_king
|
|
June 27, 2018, 06:20:46 AM |
|
I want to know I have 2 GPU GPU0 1060 3gb and GPU1 1070ti want to mine with GPU1 only and leave the GPU0 Idle should i add -di 1 to your bat file (same line as the rest)
|
|
|
|
|
ermis1975
Member
Offline
Activity: 198
Merit: 10
|
|
June 27, 2018, 09:00:14 AM |
|
I have 2 1070 cards. I want to know the best claymore settings for mining with them.
|
|
|
|
MaxMidnite
Newbie
Offline
Activity: 143
Merit: 0
|
|
June 27, 2018, 09:56:54 AM |
|
NOTE: If you use old version of the miner (less than 10.2) and mine ETH or ETC - please upgrade and use v10.2 or higher. Old versions don't support DAG epoch higher than #199, this value can be lower if you use non-zero "-eres" option value (it is "2" by default). See v10.2 description in "History.txt" for details.
Long time no see?
|
|
|
|
Ruster87
Newbie
Offline
Activity: 13
Merit: 0
|
|
June 27, 2018, 11:06:39 AM |
|
It looks like the miner hangs when switching to devfee mining: ETH - Total Speed: 402.153 Mh/s, Total Shares: 332, Rejected: 0, Time: 01:06 ETH: GPU0 29.765 Mh/s, GPU1 30.986 Mh/s, GPU2 30.675 Mh/s, GPU3 30.431 Mh/s, GPU4 29.839 Mh/s, GPU5 29.084 Mh/s, GPU6 30.319 Mh/s, GPU7 29.837 Mh/s, GPU8 30.286 Mh/s, GPU9 30.216 Mh/s, GPU10 50.664 Mh/s, GPU11 50.050 Mh/s GPU0 t=75C fan=100%, GPU1 t=73C fan=100%, GPU2 t=72C fan=100%, GPU3 t=67C fan=100%, GPU4 t=65C fan=59%, GPU5 t=68C fan=61%, GPU6 t=72C fan=100%, GPU7 t=75C fan=100%, GPU8 t=67C fan=44%, GPU9 t=66C fan=31%; GPU10 t=64C fan=40%, GPU11 t=67C fan=45% ETH: 06/26/18-11:37:34 - SHARE FOUND - (GPU 11) (DIFF: 9.114G) ETH: Share accepted (109 ms)! GPU #0: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 1:0:0) GPU #1: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 2:0:0) GPU #2: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 3:0:0) GPU #3: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 4:0:0) GPU #4: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 5:0:0) GPU #5: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 7:0:0) GPU #6: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 8:0:0) GPU #7: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 9:0:0) GPU #8: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 10:0:0) GPU #9: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 11:0:0) GPU #10: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1 (pci bus 12:0:0) GPU #11: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1 (pci bus 13:0:0) ETH - Total Speed: 402.169 Mh/s, Total Shares: 333(33+22+30+21+28+23+23+25+21+21+37+49), Rejected: 0(0+0+0+0+0+0+0+0+0+0+0+0), Time: 01:06 ETH: GPU0 29.756 Mh/s, GPU1 30.996 Mh/s, GPU2 30.673 Mh/s, GPU3 30.417 Mh/s, GPU4 29.860 Mh/s, GPU5 29.126 Mh/s, GPU6 30.232 Mh/s, GPU7 30.252 Mh/s, GPU8 30.238 Mh/s, GPU9 30.201 Mh/s, GPU10 50.376 Mh/s, GPU11 50.043 Mh/s Incorrect ETH shares: none 1 minute average ETH total speed: 402.443 Mh/s Pool switches: ETH - 0 Current ETH share target: 0x00000000ffb34c02 (diff: 4300MH), epoch 195(2.52GB) Max ETH share diff found: 97.799T Current -dcri values: -dcri 8,10,8,18,20,10,8,10,8,12,30,30 GPU0 t=75C fan=100%, GPU1 t=73C fan=100%, GPU2 t=73C fan=100%, GPU3 t=67C fan=100%, GPU4 t=65C fan=59%, GPU5 t=68C fan=61%, GPU6 t=72C fan=100%, GPU7 t=74C fan=100%, GPU8 t=67C fan=44%, GPU9 t=66C fan=31%; GPU10 t=64C fan=40%, GPU11 t=67C fan=45% ETH: 06/26/18-11:37:55 - SHARE FOUND - (GPU 5) (DIFF: 14.889G) DevFee: ETH: Stratum - connecting to 'eth-eu.dwarfpool.com' <91.134.50.158> port 8008 (unsecure) Minimal speed ("-minspeed" option) was set to 370 MH/s. Miner cannot reach this speed for 5 minutes, need to restart miner! ETH: Connection lost, retry in 5 sec... GPU #0: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 1:0:0) GPU #1: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 2:0:0) GPU #2: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 3:0:0) GPU #3: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 4:0:0) GPU #4: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 5:0:0) GPU #5: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 7:0:0) GPU #6: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 8:0:0) GPU #7: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 9:0:0) GPU #8: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 10:0:0) GPU #9: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 11:0:0) GPU #10: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1 (pci bus 12:0:0) GPU #11: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1 (pci bus 13:0:0) ETH - Total Speed: 220.363 Mh/s, Total Shares: 334(33+22+30+21+29+25+23+25+22+23+38+50), Rejected: 0(0+0+0+0+0+0+0+0+0+0+0+0), Time: 01:25 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 29.869 Mh/s, GPU5 29.087 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s, GPU8 30.337 Mh/s, GPU9 30.200 Mh/s, GPU10 50.549 Mh/s, GPU11 50.321 Mh/s Incorrect ETH shares: none 1 minute average ETH total speed: 220.493 Mh/s Pool switches: ETH - 0 Max ETH share diff found: 97.799T Current -dcri values: -dcri 8,10,8,18,20,10,8,10,8,12,30,30 DevFee: ETH: Stratum - Connected (eth-eu.dwarfpool.com:8008) (unsecure) Any idea how to prevent this? Remove "-minspeed" option I'm surprised you can sleep well at night with GPUS at those temperatures.
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
June 27, 2018, 12:53:39 PM |
|
It looks like the miner hangs when switching to devfee mining: ETH - Total Speed: 402.169 Mh/s, Total Shares: 333(33+22+30+21+28+23+23+25+21+21+37+49), Rejected: 0(0+0+0+0+0+0+0+0+0+0+0+0), Time: 01:06 ETH: GPU0 29.756 Mh/s, GPU1 30.996 Mh/s, GPU2 30.673 Mh/s, GPU3 30.417 Mh/s, GPU4 29.860 Mh/s, GPU5 29.126 Mh/s, GPU6 30.232 Mh/s, GPU7 30.252 Mh/s, GPU8 30.238 Mh/s, GPU9 30.201 Mh/s, GPU10 50.376 Mh/s, GPU11 50.043 Mh/s Incorrect ETH shares: none 1 minute average ETH total speed: 402.443 Mh/s Pool switches: ETH - 0 Current ETH share target: 0x00000000ffb34c02 (diff: 4300MH), epoch 195(2.52GB) Max ETH share diff found: 97.799T Current -dcri values: -dcri 8,10,8,18,20,10,8,10,8,12,30,30 GPU0 t=75C fan=100%, GPU1 t=73C fan=100%, GPU2 t=73C fan=100%, GPU3 t=67C fan=100%, GPU4 t=65C fan=59%, GPU5 t=68C fan=61%, GPU6 t=72C fan=100%, GPU7 t=74C fan=100%, GPU8 t=67C fan=44%, GPU9 t=66C fan=31%; GPU10 t=64C fan=40%, GPU11 t=67C fan=45% ETH: 06/26/18-11:37:55 - SHARE FOUND - (GPU 5) (DIFF: 14.889G) DevFee: ETH: Stratum - connecting to 'eth-eu.dwarfpool.com' <91.134.50.158> port 8008 (unsecure) Minimal speed ("-minspeed" option) was set to 370 MH/s. Miner cannot reach this speed for 5 minutes, need to restart miner! ETH: Connection lost, retry in 5 sec... GPU #0: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 1:0:0) GPU #1: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 2:0:0) GPU #2: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 3:0:0) GPU #3: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 4:0:0) GPU #4: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 5:0:0) GPU #5: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 7:0:0) GPU #6: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 8:0:0) GPU #7: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 9:0:0) GPU #8: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 10:0:0) GPU #9: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 11:0:0) GPU #10: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1 (pci bus 12:0:0) GPU #11: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1 (pci bus 13:0:0) ETH - Total Speed: 220.363 Mh/s, Total Shares: 334(33+22+30+21+29+25+23+25+22+23+38+50), Rejected: 0(0+0+0+0+0+0+0+0+0+0+0+0), Time: 01:25 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 29.869 Mh/s, GPU5 29.087 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s, GPU8 30.337 Mh/s, GPU9 30.200 Mh/s, GPU10 50.549 Mh/s, GPU11 50.321 Mh/s Incorrect ETH shares: none 1 minute average ETH total speed: 220.493 Mh/s Pool switches: ETH - 0 Max ETH share diff found: 97.799T Current -dcri values: -dcri 8,10,8,18,20,10,8,10,8,12,30,30 DevFee: ETH: Stratum - Connected (eth-eu.dwarfpool.com:8008) (unsecure) Any idea how to prevent this? 20 log lines for 19 minutes? Try to apply this (from FAQ): - Miner freezes if I put cursor to its window in Windows 10 until any key is pressed. Sometimes miner freezes randomly until any key is pressed. You should make some changes in Windows: https://superuser.com/questions/555160/windows-command-prompt-freezing-on-focus https://superuser.com/questions/419717/windows-command-prompt-freezing-randomly?rq=1 https://superuser.com/questions/1051821/command-prompt-random-pause?rq=1
|
|
|
|
bithead007
Newbie
Offline
Activity: 22
Merit: 0
|
|
June 27, 2018, 12:54:52 PM |
|
So I've got one machine with pretty bad mouse/sprite lagging. It starts when Ethereum mining starts. This machine was working fine and I had to rebuild it with a fresh Windows 10 install.
It's Windows 10, latest, all patches. ULPS is off, I have never used ethi so not thinking I need to start now. I did try ethi 1 and the hash rate dropped significantly and still lagging. Visual effects in Win 10 are off. I've tried everything I can think of and could use some ideas. GEForce software isn't installed (or at least I don't see it anyplace). Mix of RX580 cards and a couple of GTX 1060's. Radeon driver is the recent .5.1 and Nvidia is the latest one.
Help!
Thanks, CJ
biostar board? check your task manager, is system interrupts cpu usage high? Thanks, I already turned off PCI AER so that isn't it. Any other ideas? CJ
|
|
|
|
|