Bitcoin Forum
July 15, 2019, 09:34:26 PM *
News: Latest Bitcoin Core release: 0.18.0 [Torrent] (New!)
 
   Home   Help Search Login Register More  
Pages: « 1 ... 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 [1219] 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 ... 1336 »
  Print  
Author Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v14.7 (Windows/Linux)  (Read 6355577 times)
hugomenezes
Newbie
*
Offline Offline

Activity: 5
Merit: 0


View Profile
June 26, 2018, 05:20:37 PM

I dont know why my Claymore i only get 22mh/s. I try all steps and still the same.
When i try change the GPU and MEM frenquency the mh/s still the same. Its strange!


Hi all,
I need some help to resolve a problem on my Rig.
My Specs is:
Motherboard: ASUS B250 Miner Expert with lastest bios
RAM: 4GB
HDD:320GB
CPU: G4400
VGA: MSI RX580 Armor 8GB + Gigabyte RX580 Gaming 8GB
PSU: 2000W
Miner: Claymore 11.8
OS: Windows 10 Pro

I had Windows 10 with all updates, the drivers all updated and my problem is the mh/s speed, i only get 22mh/s i try to put diferent clocks speed on GPU and RAM but the result its the same   22mh/s.
I build other RIG with the same hardware and i get 30mh/s on RX580 with clocks GPU 1250Mhz 0.950v RAM 2150Mhz 0.950v.

Anyone had this problem?
Sry for my poor english.

Regards

Did you switch your gpu workload from graphics to compute?
In Claymore 11.6 or newer you can: press "y" key to turn on "Compute Mode" in AMD drivers for all cards
That could be the problem.
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
1563226466
Hero Member
*
Offline Offline

Posts: 1563226466

View Profile Personal Message (Offline)

Ignore
1563226466
Reply with quote  #2

1563226466
Report to moderator
1563226466
Hero Member
*
Offline Offline

Posts: 1563226466

View Profile Personal Message (Offline)

Ignore
1563226466
Reply with quote  #2

1563226466
Report to moderator
1563226466
Hero Member
*
Offline Offline

Posts: 1563226466

View Profile Personal Message (Offline)

Ignore
1563226466
Reply with quote  #2

1563226466
Report to moderator
promomei
Sr. Member
****
Offline Offline

Activity: 404
Merit: 254



View Profile
June 26, 2018, 05:36:56 PM

Hi guys
anybody know what is going on on ethermine ETC pool

its 3 different deposit addresses

every day this happens two times

https://imgur.com/a/NBxutVf
promomei
Sr. Member
****
Offline Offline

Activity: 404
Merit: 254



View Profile
June 26, 2018, 05:47:26 PM

Hi, I get ETC, sometimes my rig reboots, and Claymor's log comes to an end with the line NULNULNUL... Sometimes one hour, and sometimes works and 30, I can't understand in what the reason. Somebody knows that he means if the ravine comes to an end with NULNULNUL...


Have you tried to re-download claymore?
Are you using the latest version? Maybe try another version and check if it gives you the same error...
Have you checked if you are using the right drivers?


everybody has same problem - just go check random address on etc ethermine org pool
cant understand this also  

mining ETH is no problem
mining ETC is problem with same tools

looks like some kind of attack in ETC
Jeeperz74
Newbie
*
Offline Offline

Activity: 14
Merit: 0


View Profile
June 26, 2018, 06:38:45 PM

Hi guys
anybody know what is going on on ethermine ETC pool

its 3 different deposit addresses

every day this happens two times

https://imgur.com/a/NBxutVf


I been having problems with the ETC pool there too. I mine ETH just fine but when I switch to ETC it gives me the same problems.
nikdd
Newbie
*
Offline Offline

Activity: 1
Merit: 0


View Profile
June 26, 2018, 06:40:24 PM

Why I cannot use Nvidia GTX 970 cards at full speed (18-22mh) instead of 3-6mh? I was tried so many solutions. I tested on Win7 and Simplemining ubuntu editions. In rare cases on win7 sometimes cards start mining at 17-18mh but in short time speed degrades to 3-4mh. Thank You in advance.
androstan1234
Jr. Member
*
Offline Offline

Activity: 251
Merit: 6


View Profile
June 26, 2018, 07:08:07 PM

It looks like the miner hangs when switching to devfee mining:

Quote
ETH - Total Speed: 402.153 Mh/s, Total Shares: 332, Rejected: 0, Time: 01:06
ETH: GPU0 29.765 Mh/s, GPU1 30.986 Mh/s, GPU2 30.675 Mh/s, GPU3 30.431 Mh/s, GPU4 29.839 Mh/s, GPU5 29.084 Mh/s, GPU6 30.319 Mh/s, GPU7 29.837 Mh/s, GPU8 30.286 Mh/s, GPU9 30.216 Mh/s, GPU10 50.664 Mh/s, GPU11 50.050 Mh/s
GPU0 t=75C fan=100%, GPU1 t=73C fan=100%, GPU2 t=72C fan=100%, GPU3 t=67C fan=100%, GPU4 t=65C fan=59%, GPU5 t=68C fan=61%, GPU6 t=72C fan=100%, GPU7 t=75C fan=100%, GPU8 t=67C fan=44%, GPU9 t=66C fan=31%; GPU10 t=64C fan=40%, GPU11 t=67C fan=45%
ETH: 06/26/18-11:37:34 - SHARE FOUND - (GPU 11) (DIFF: 9.114G)
ETH: Share accepted (109 ms)!
GPU #0: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 1:0:0)
GPU #1: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 2:0:0)
GPU #2: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 3:0:0)
GPU #3: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 4:0:0)
GPU #4: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 5:0:0)
GPU #5: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 7:0:0)
GPU #6: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 8:0:0)
GPU #7: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 9:0:0)
GPU #8: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 10:0:0)
GPU #9: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 11:0:0)
GPU #10: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1  (pci bus 12:0:0)
GPU #11: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1  (pci bus 13:0:0)
ETH - Total Speed: 402.169 Mh/s, Total Shares: 333(33+22+30+21+28+23+23+25+21+21+37+49), Rejected: 0(0+0+0+0+0+0+0+0+0+0+0+0), Time: 01:06
ETH: GPU0 29.756 Mh/s, GPU1 30.996 Mh/s, GPU2 30.673 Mh/s, GPU3 30.417 Mh/s, GPU4 29.860 Mh/s, GPU5 29.126 Mh/s, GPU6 30.232 Mh/s, GPU7 30.252 Mh/s, GPU8 30.238 Mh/s, GPU9 30.201 Mh/s, GPU10 50.376 Mh/s, GPU11 50.043 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 402.443 Mh/s
Pool switches: ETH - 0
Current ETH share target: 0x00000000ffb34c02 (diff: 4300MH), epoch 195(2.52GB)
Max ETH share diff found: 97.799T
Current -dcri values: -dcri 8,10,8,18,20,10,8,10,8,12,30,30
GPU0 t=75C fan=100%, GPU1 t=73C fan=100%, GPU2 t=73C fan=100%, GPU3 t=67C fan=100%, GPU4 t=65C fan=59%, GPU5 t=68C fan=61%, GPU6 t=72C fan=100%, GPU7 t=74C fan=100%, GPU8 t=67C fan=44%, GPU9 t=66C fan=31%; GPU10 t=64C fan=40%, GPU11 t=67C fan=45%
ETH: 06/26/18-11:37:55 - SHARE FOUND - (GPU 5) (DIFF: 14.889G)
DevFee: ETH: Stratum - connecting to 'eth-eu.dwarfpool.com' <91.134.50.158> port 8008 (unsecure)
Minimal speed ("-minspeed" option) was set to 370 MH/s. Miner cannot reach this speed for 5 minutes, need to restart miner!

ETH: Connection lost, retry in 5 sec...
GPU #0: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 1:0:0)
GPU #1: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 2:0:0)
GPU #2: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 3:0:0)
GPU #3: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 4:0:0)
GPU #4: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 5:0:0)
GPU #5: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 7:0:0)
GPU #6: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 8:0:0)
GPU #7: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 9:0:0)
GPU #8: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 10:0:0)
GPU #9: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 11:0:0)
GPU #10: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1  (pci bus 12:0:0)
GPU #11: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1  (pci bus 13:0:0)
ETH - Total Speed: 220.363 Mh/s, Total Shares: 334(33+22+30+21+29+25+23+25+22+23+38+50), Rejected: 0(0+0+0+0+0+0+0+0+0+0+0+0), Time: 01:25
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 29.869 Mh/s, GPU5 29.087 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s, GPU8 30.337 Mh/s, GPU9 30.200 Mh/s, GPU10 50.549 Mh/s, GPU11 50.321 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 220.493 Mh/s
Pool switches: ETH - 0
Max ETH share diff found: 97.799T
Current -dcri values: -dcri 8,10,8,18,20,10,8,10,8,12,30,30
DevFee: ETH: Stratum - Connected (eth-eu.dwarfpool.com:8008) (unsecure)

Any idea how to prevent this?
gooppoop
Newbie
*
Offline Offline

Activity: 10
Merit: 0


View Profile
June 26, 2018, 09:00:03 PM

It looks like the miner hangs when switching to devfee mining:

Quote
ETH - Total Speed: 402.153 Mh/s, Total Shares: 332, Rejected: 0, Time: 01:06
ETH: GPU0 29.765 Mh/s, GPU1 30.986 Mh/s, GPU2 30.675 Mh/s, GPU3 30.431 Mh/s, GPU4 29.839 Mh/s, GPU5 29.084 Mh/s, GPU6 30.319 Mh/s, GPU7 29.837 Mh/s, GPU8 30.286 Mh/s, GPU9 30.216 Mh/s, GPU10 50.664 Mh/s, GPU11 50.050 Mh/s
GPU0 t=75C fan=100%, GPU1 t=73C fan=100%, GPU2 t=72C fan=100%, GPU3 t=67C fan=100%, GPU4 t=65C fan=59%, GPU5 t=68C fan=61%, GPU6 t=72C fan=100%, GPU7 t=75C fan=100%, GPU8 t=67C fan=44%, GPU9 t=66C fan=31%; GPU10 t=64C fan=40%, GPU11 t=67C fan=45%
ETH: 06/26/18-11:37:34 - SHARE FOUND - (GPU 11) (DIFF: 9.114G)
ETH: Share accepted (109 ms)!
GPU #0: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 1:0:0)
GPU #1: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 2:0:0)
GPU #2: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 3:0:0)
GPU #3: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 4:0:0)
GPU #4: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 5:0:0)
GPU #5: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 7:0:0)
GPU #6: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 8:0:0)
GPU #7: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 9:0:0)
GPU #8: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 10:0:0)
GPU #9: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 11:0:0)
GPU #10: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1  (pci bus 12:0:0)
GPU #11: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1  (pci bus 13:0:0)
ETH - Total Speed: 402.169 Mh/s, Total Shares: 333(33+22+30+21+28+23+23+25+21+21+37+49), Rejected: 0(0+0+0+0+0+0+0+0+0+0+0+0), Time: 01:06
ETH: GPU0 29.756 Mh/s, GPU1 30.996 Mh/s, GPU2 30.673 Mh/s, GPU3 30.417 Mh/s, GPU4 29.860 Mh/s, GPU5 29.126 Mh/s, GPU6 30.232 Mh/s, GPU7 30.252 Mh/s, GPU8 30.238 Mh/s, GPU9 30.201 Mh/s, GPU10 50.376 Mh/s, GPU11 50.043 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 402.443 Mh/s
Pool switches: ETH - 0
Current ETH share target: 0x00000000ffb34c02 (diff: 4300MH), epoch 195(2.52GB)
Max ETH share diff found: 97.799T
Current -dcri values: -dcri 8,10,8,18,20,10,8,10,8,12,30,30
GPU0 t=75C fan=100%, GPU1 t=73C fan=100%, GPU2 t=73C fan=100%, GPU3 t=67C fan=100%, GPU4 t=65C fan=59%, GPU5 t=68C fan=61%, GPU6 t=72C fan=100%, GPU7 t=74C fan=100%, GPU8 t=67C fan=44%, GPU9 t=66C fan=31%; GPU10 t=64C fan=40%, GPU11 t=67C fan=45%
ETH: 06/26/18-11:37:55 - SHARE FOUND - (GPU 5) (DIFF: 14.889G)
DevFee: ETH: Stratum - connecting to 'eth-eu.dwarfpool.com' <91.134.50.158> port 8008 (unsecure)
Minimal speed ("-minspeed" option) was set to 370 MH/s. Miner cannot reach this speed for 5 minutes, need to restart miner!

ETH: Connection lost, retry in 5 sec...
GPU #0: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 1:0:0)
GPU #1: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 2:0:0)
GPU #2: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 3:0:0)
GPU #3: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 4:0:0)
GPU #4: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 5:0:0)
GPU #5: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 7:0:0)
GPU #6: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 8:0:0)
GPU #7: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 9:0:0)
GPU #8: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 10:0:0)
GPU #9: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 11:0:0)
GPU #10: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1  (pci bus 12:0:0)
GPU #11: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1  (pci bus 13:0:0)
ETH - Total Speed: 220.363 Mh/s, Total Shares: 334(33+22+30+21+29+25+23+25+22+23+38+50), Rejected: 0(0+0+0+0+0+0+0+0+0+0+0+0), Time: 01:25
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 29.869 Mh/s, GPU5 29.087 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s, GPU8 30.337 Mh/s, GPU9 30.200 Mh/s, GPU10 50.549 Mh/s, GPU11 50.321 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 220.493 Mh/s
Pool switches: ETH - 0
Max ETH share diff found: 97.799T
Current -dcri values: -dcri 8,10,8,18,20,10,8,10,8,12,30,30
DevFee: ETH: Stratum - Connected (eth-eu.dwarfpool.com:8008) (unsecure)

Any idea how to prevent this?

Remove "-minspeed" option
UnknownTraders
Newbie
*
Offline Offline

Activity: 57
Merit: 0


View Profile
June 26, 2018, 10:30:21 PM

GPU hangs are usually due to running them faster than what the manufacturer has approved, principally on the memory or too much undervolt for that card. What may help is draining all the power from the condenser which also helps reset the GPU's and extenders after a crash. Switch off the gear, cut off the power to the power supply unit via the switch on the back and press the power button to drain all the power. Then wait about two minutes before turning it back on.
Jeeperz74
Newbie
*
Offline Offline

Activity: 14
Merit: 0


View Profile
June 27, 2018, 01:24:18 AM

Looks like my problems mining ETC have gone away. It must of been a pool problem and the miner is running smoothly now.
bigdaddymccarron
Jr. Member
*
Offline Offline

Activity: 34
Merit: 2


View Profile
June 27, 2018, 02:02:14 AM

@bigdaddymccarron, could it be your swap file is not big enough for the DAG files?  I'm no expert on Ubuntu, but sometimes we overlook the simplest things.

I will check that, I saw something the other day that indicated it should be 22 gb.
DireWolfM14
Sr. Member
****
Online Online

Activity: 448
Merit: 645



View Profile WWW
June 27, 2018, 02:18:30 AM

A reliable source recommends 2.6gb per card, plus another 10 or 12.

@bigdaddymccarron, could it be your swap file is not big enough for the DAG files?  I'm no expert on Ubuntu, but sometimes we overlook the simplest things.

I will check that, I saw something the other day that indicated it should be 22 gb.
skyline_king
Sr. Member
****
Offline Offline

Activity: 602
Merit: 250



View Profile
June 27, 2018, 06:20:46 AM

I want to know I have 2 GPU GPU0 1060 3gb and GPU1 1070ti
want to mine with GPU1 only and leave the GPU0 Idle
should i add -di 1 to your bat file (same line as the rest)
Balthazar
Legendary
*
Offline Offline

Activity: 2632
Merit: 1041


Terran Emperor


View Profile WWW
June 27, 2018, 07:58:48 AM

Claymore

Users are still reporting random crashes in -esm 3 mode.

https://miningclub.info/threads/etherdig-net-pps-vs-hvpps-i-ne-tolko.40761/page-3#post-1022348
https://miningclub.info/threads/etherdig-net-pps-vs-hvpps-i-ne-tolko.40761/page-3#post-1034974

This may happen in 2-3 hours hours, few days or even not happen at all.

Typical description looks like "I've connected my farm there, and got my Claymore's miner crashed few hours later. So I switched to another pool".

There is no such problem with -esm 1 mode, as well as no issues with another software running in EthereumStratum mode. Ethminer is rock stable, for example... Though, on the other hand, it has some hardware compatibility issues.

ermis1975
Member
**
Offline Offline

Activity: 158
Merit: 10


View Profile
June 27, 2018, 09:00:14 AM

I have 2 1070 cards. I want to know the best claymore settings for mining with them.
MaxMidnite
Newbie
*
Offline Offline

Activity: 137
Merit: 0


View Profile
June 27, 2018, 09:56:54 AM

NOTE:
If you use old version of the miner (less than 10.2) and mine ETH or ETC - please upgrade and use v10.2 or higher. Old versions don't support DAG epoch higher than #199, this value can be lower if you use non-zero "-eres" option value (it is "2" by default).
See v10.2 description in "History.txt" for details.

Long time no see?
Ruster87
Newbie
*
Offline Offline

Activity: 13
Merit: 0


View Profile
June 27, 2018, 11:06:39 AM

It looks like the miner hangs when switching to devfee mining:

Quote
ETH - Total Speed: 402.153 Mh/s, Total Shares: 332, Rejected: 0, Time: 01:06
ETH: GPU0 29.765 Mh/s, GPU1 30.986 Mh/s, GPU2 30.675 Mh/s, GPU3 30.431 Mh/s, GPU4 29.839 Mh/s, GPU5 29.084 Mh/s, GPU6 30.319 Mh/s, GPU7 29.837 Mh/s, GPU8 30.286 Mh/s, GPU9 30.216 Mh/s, GPU10 50.664 Mh/s, GPU11 50.050 Mh/s
GPU0 t=75C fan=100%, GPU1 t=73C fan=100%, GPU2 t=72C fan=100%, GPU3 t=67C fan=100%, GPU4 t=65C fan=59%, GPU5 t=68C fan=61%, GPU6 t=72C fan=100%, GPU7 t=75C fan=100%, GPU8 t=67C fan=44%, GPU9 t=66C fan=31%; GPU10 t=64C fan=40%, GPU11 t=67C fan=45%
ETH: 06/26/18-11:37:34 - SHARE FOUND - (GPU 11) (DIFF: 9.114G)
ETH: Share accepted (109 ms)!
GPU #0: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 1:0:0)
GPU #1: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 2:0:0)
GPU #2: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 3:0:0)
GPU #3: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 4:0:0)
GPU #4: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 5:0:0)
GPU #5: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 7:0:0)
GPU #6: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 8:0:0)
GPU #7: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 9:0:0)
GPU #8: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 10:0:0)
GPU #9: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 11:0:0)
GPU #10: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1  (pci bus 12:0:0)
GPU #11: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1  (pci bus 13:0:0)
ETH - Total Speed: 402.169 Mh/s, Total Shares: 333(33+22+30+21+28+23+23+25+21+21+37+49), Rejected: 0(0+0+0+0+0+0+0+0+0+0+0+0), Time: 01:06
ETH: GPU0 29.756 Mh/s, GPU1 30.996 Mh/s, GPU2 30.673 Mh/s, GPU3 30.417 Mh/s, GPU4 29.860 Mh/s, GPU5 29.126 Mh/s, GPU6 30.232 Mh/s, GPU7 30.252 Mh/s, GPU8 30.238 Mh/s, GPU9 30.201 Mh/s, GPU10 50.376 Mh/s, GPU11 50.043 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 402.443 Mh/s
Pool switches: ETH - 0
Current ETH share target: 0x00000000ffb34c02 (diff: 4300MH), epoch 195(2.52GB)
Max ETH share diff found: 97.799T
Current -dcri values: -dcri 8,10,8,18,20,10,8,10,8,12,30,30
GPU0 t=75C fan=100%, GPU1 t=73C fan=100%, GPU2 t=73C fan=100%, GPU3 t=67C fan=100%, GPU4 t=65C fan=59%, GPU5 t=68C fan=61%, GPU6 t=72C fan=100%, GPU7 t=74C fan=100%, GPU8 t=67C fan=44%, GPU9 t=66C fan=31%; GPU10 t=64C fan=40%, GPU11 t=67C fan=45%
ETH: 06/26/18-11:37:55 - SHARE FOUND - (GPU 5) (DIFF: 14.889G)
DevFee: ETH: Stratum - connecting to 'eth-eu.dwarfpool.com' <91.134.50.158> port 8008 (unsecure)
Minimal speed ("-minspeed" option) was set to 370 MH/s. Miner cannot reach this speed for 5 minutes, need to restart miner!

ETH: Connection lost, retry in 5 sec...
GPU #0: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 1:0:0)
GPU #1: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 2:0:0)
GPU #2: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 3:0:0)
GPU #3: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 4:0:0)
GPU #4: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 5:0:0)
GPU #5: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 7:0:0)
GPU #6: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 8:0:0)
GPU #7: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 9:0:0)
GPU #8: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 10:0:0)
GPU #9: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 11:0:0)
GPU #10: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1  (pci bus 12:0:0)
GPU #11: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1  (pci bus 13:0:0)
ETH - Total Speed: 220.363 Mh/s, Total Shares: 334(33+22+30+21+29+25+23+25+22+23+38+50), Rejected: 0(0+0+0+0+0+0+0+0+0+0+0+0), Time: 01:25
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 29.869 Mh/s, GPU5 29.087 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s, GPU8 30.337 Mh/s, GPU9 30.200 Mh/s, GPU10 50.549 Mh/s, GPU11 50.321 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 220.493 Mh/s
Pool switches: ETH - 0
Max ETH share diff found: 97.799T
Current -dcri values: -dcri 8,10,8,18,20,10,8,10,8,12,30,30
DevFee: ETH: Stratum - Connected (eth-eu.dwarfpool.com:8008) (unsecure)

Any idea how to prevent this?

Remove "-minspeed" option

I'm surprised you can sleep well at night with GPUS at those temperatures.
Claymore
Donator
Legendary
*
Offline Offline

Activity: 1526
Merit: 1296

Miners developer


View Profile
June 27, 2018, 12:53:39 PM

It looks like the miner hangs when switching to devfee mining:

Quote
ETH - Total Speed: 402.169 Mh/s, Total Shares: 333(33+22+30+21+28+23+23+25+21+21+37+49), Rejected: 0(0+0+0+0+0+0+0+0+0+0+0+0), Time: 01:06
ETH: GPU0 29.756 Mh/s, GPU1 30.996 Mh/s, GPU2 30.673 Mh/s, GPU3 30.417 Mh/s, GPU4 29.860 Mh/s, GPU5 29.126 Mh/s, GPU6 30.232 Mh/s, GPU7 30.252 Mh/s, GPU8 30.238 Mh/s, GPU9 30.201 Mh/s, GPU10 50.376 Mh/s, GPU11 50.043 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 402.443 Mh/s
Pool switches: ETH - 0
Current ETH share target: 0x00000000ffb34c02 (diff: 4300MH), epoch 195(2.52GB)
Max ETH share diff found: 97.799T
Current -dcri values: -dcri 8,10,8,18,20,10,8,10,8,12,30,30
GPU0 t=75C fan=100%, GPU1 t=73C fan=100%, GPU2 t=73C fan=100%, GPU3 t=67C fan=100%, GPU4 t=65C fan=59%, GPU5 t=68C fan=61%, GPU6 t=72C fan=100%, GPU7 t=74C fan=100%, GPU8 t=67C fan=44%, GPU9 t=66C fan=31%; GPU10 t=64C fan=40%, GPU11 t=67C fan=45%
ETH: 06/26/18-11:37:55 - SHARE FOUND - (GPU 5) (DIFF: 14.889G)
DevFee: ETH: Stratum - connecting to 'eth-eu.dwarfpool.com' <91.134.50.158> port 8008 (unsecure)
Minimal speed ("-minspeed" option) was set to 370 MH/s. Miner cannot reach this speed for 5 minutes, need to restart miner!

ETH: Connection lost, retry in 5 sec...
GPU #0: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 1:0:0)
GPU #1: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 2:0:0)
GPU #2: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 3:0:0)
GPU #3: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 4:0:0)
GPU #4: Ellesmere (Radeon RX 580 Series), 4096 MB available, 36 compute units (pci bus 5:0:0)
GPU #5: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 7:0:0)
GPU #6: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 8:0:0)
GPU #7: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 9:0:0)
GPU #8: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 10:0:0)
GPU #9: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 11:0:0)
GPU #10: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1  (pci bus 12:0:0)
GPU #11: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1  (pci bus 13:0:0)
ETH - Total Speed: 220.363 Mh/s, Total Shares: 334(33+22+30+21+29+25+23+25+22+23+38+50), Rejected: 0(0+0+0+0+0+0+0+0+0+0+0+0), Time: 01:25
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 29.869 Mh/s, GPU5 29.087 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s, GPU8 30.337 Mh/s, GPU9 30.200 Mh/s, GPU10 50.549 Mh/s, GPU11 50.321 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 220.493 Mh/s
Pool switches: ETH - 0
Max ETH share diff found: 97.799T
Current -dcri values: -dcri 8,10,8,18,20,10,8,10,8,12,30,30
DevFee: ETH: Stratum - Connected (eth-eu.dwarfpool.com:8008) (unsecure)

Any idea how to prevent this?

20 log lines for 19 minutes? Try to apply this (from FAQ):

- Miner freezes if I put cursor to its window in Windows 10 until any key is pressed. Sometimes miner freezes randomly until any key is pressed.
  You should make some changes in Windows:
  https://superuser.com/questions/555160/windows-command-prompt-freezing-on-focus
  https://superuser.com/questions/419717/windows-command-prompt-freezing-randomly?rq=1
  https://superuser.com/questions/1051821/command-prompt-random-pause?rq=1

Please read Readme and FAQ in the first post of this thread before asking any questions, probably the answer is already there.
List of my miners: https://bitcointalk.org/index.php?topic=3019607
bithead007
Newbie
*
Offline Offline

Activity: 22
Merit: 0


View Profile
June 27, 2018, 12:54:52 PM

So I've got one machine with pretty bad mouse/sprite lagging. It starts when Ethereum mining starts. This machine was working fine and I had to rebuild it with a fresh Windows 10 install.

It's Windows 10, latest, all patches. ULPS is off, I have never used ethi so not thinking I need to start now.  I did try ethi 1 and the hash rate dropped significantly and still lagging. Visual effects in Win 10 are off.  I've tried everything I can think of and could use some ideas.  GEForce software isn't installed (or at least I don't see it anyplace).  Mix of RX580 cards and a couple of GTX 1060's. Radeon driver is the recent .5.1 and Nvidia is the latest one.

Help!

Thanks,
CJ

biostar board? check your task manager, is system interrupts cpu usage high?

Thanks, I already turned off PCI AER so that isn't it.  Any other ideas?   

CJ
Claymore
Donator
Legendary
*
Offline Offline

Activity: 1526
Merit: 1296

Miners developer


View Profile
June 27, 2018, 12:58:20 PM

Claymore
Users are still reporting random crashes in -esm 3 mode.
https://miningclub.info/threads/etherdig-net-pps-vs-hvpps-i-ne-tolko.40761/page-3#post-1022348
https://miningclub.info/threads/etherdig-net-pps-vs-hvpps-i-ne-tolko.40761/page-3#post-1034974
This may happen in 2-3 hours hours, few days or even not happen at all.
Typical description looks like "I've connected my farm there, and got my Claymore's miner crashed few hours later. So I switched to another pool".
There is no such problem with -esm 1 mode, as well as no issues with another software running in EthereumStratum mode. Ethminer is rock stable, for example... Though, on the other hand, it has some hardware compatibility issues.

Any log files or any way how to reproduce it? You already mentioned this issue in past, I checked sources and did some tests but could not find any problems related to "-esm 3" mode.

Please read Readme and FAQ in the first post of this thread before asking any questions, probably the answer is already there.
List of my miners: https://bitcointalk.org/index.php?topic=3019607
andreykx
Newbie
*
Offline Offline

Activity: 7
Merit: 0


View Profile
June 27, 2018, 10:12:26 PM

Radeon R7 370, mining EXP - the miner crashes when starting to mine devfee.
Also, it detects the GPU as 3Gb, not 4Gb (still tries to mine devfee, though).

Adrenalin 18.5.1, Win7, 32Gb pagefile, env variables set.

Code:
22:20:10:206 1320 Check and remove old log files...
22:20:10:210 1320 args: -allcoins 1 -ewal ffca6794f123a989648d85d0657f750b4798283c/1 -epool exp-eu.dwarfpool.com:8018
22:20:10:213 1320
22:20:10:215 1320 浜様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様融
22:20:10:218 1320                 Claymore's Dual GPU Miner - v11.8               
22:20:10:221 1320               ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             
22:20:10:224 1320 藩様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様夕
22:20:10:228 1320
22:20:10:230 1320 b591
22:20:10:433 1320 ETH: 1 pool is specified
22:20:10:436 1320 Main Ethereum pool is exp-eu.dwarfpool.com:8018
22:20:10:439 1320 DCR: 0 pool is specified
22:20:10:680 1320 OpenCL platform: AMD Accelerated Parallel Processing
22:20:10:683 1320 OpenCL platform: Intel(R) OpenCL
22:20:10:687 1320 OpenCL initializing...

22:20:10:690 1320 AMD Cards available: 1
22:20:10:693 1320 GPU #0: Pitcairn (AMD Radeon (TM) R7 370 Series), 3072 MB available, 16 compute units (pci bus 1:0:0)
22:20:10:696 1320 POOL/SOLO version
22:20:10:699 1320 Platform: Windows
22:20:10:749 1320 start building OpenCL program for GPU 0...
22:20:10:780 1320 done
22:20:11:001 1320 GPU #0: algorithm ASM 1
22:20:11:005 1320 cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
22:20:11:008 1320 No NVIDIA CUDA GPUs detected.
22:20:11:012 1320 Total cards: 1
22:20:15:098 1320 No NVIDIA cards in the list, NVML library will not be used.
22:20:16:154 1320 SSL: Imported 56 certificates from local storage
22:20:16:259 1320 No pool specified for Decred! Ethereum-only mining mode is enabled

22:20:16:265 1320 ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)

22:20:16:269 1320 ETH: eth-proxy stratum mode
22:20:16:273 1320 "-allcoins" option is set, default pools will be used for devfee, check "Readme" file for details.
22:20:16:277 1320 Watchdog enabled
22:20:16:281 1320 Remote management (READ-ONLY MODE) is enabled on port 3333
22:20:16:285 1320

22:20:16:290 1320 You did not specify -dcri values directly, so they will be detected automatically
22:20:16:294 1320 Automatic detection of best -dcri values started, please wait...

22:20:16:356 15a4 ETH: Stratum - connecting to 'exp-eu.dwarfpool.com' <37.48.109.37> port 8018 (unsecure)
22:20:16:471 15a4 sent: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["ffca6794f123a989648d85d0657f750b4798283c/1", ""], "id": 2, "method": "eth_submitLogin"}

22:20:16:476 15a4 ETH: Stratum - Connected (exp-eu.dwarfpool.com:8018) (unsecure)
22:20:16:731 15a4 buf: {"id":2,"jsonrpc":"2.0","result":true}

22:20:16:736 15a4 ETH: Authorized
22:20:16:740 15a4 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

22:20:16:883 15a4 buf: {"result":["0x847fb857fbc108b3609142f074bf020d8f1dbce72bca09d92c036b1e6485c7f8","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


22:20:16:930 13a8 Setting DAG epoch #41...
22:20:18:255 13a8 Setting DAG epoch #41 for GPU0
22:20:18:259 13a8 Create GPU buffer for GPU0
22:20:23:500 13a8 GPU0 DAG creation time - 5225 ms
22:20:23:505 13a8 Setting DAG epoch #41 for GPU0 done
22:20:26:894 15a4 ETH: checking pool connection...
22:20:26:898 15a4 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

22:20:27:383 15a4 buf: {"result":["0x847fb857fbc108b3609142f074bf020d8f1dbce72bca09d92c036b1e6485c7f8","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


22:20:35:083 13a8 gd 0.80
22:20:36:893 15a4 sent: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0xe64673", "0x000000000000000000000000000000000000000000000000000000000daddfa5"]}

22:20:36:909 15a4 ETH: checking pool connection...
22:20:36:913 15a4 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

22:20:37:420 15a4 buf: {"id":6,"jsonrpc":"2.0","result":true}


22:20:37:445 71c GPU #0: apply best detected -dcri value: 64
22:20:37:451 71c Automatic detection of best -dcri values completed
22:20:37:800 15a4 buf: {"result":["0x847fb857fbc108b3609142f074bf020d8f1dbce72bca09d92c036b1e6485c7f8","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


22:20:40:454 71c em hbt: 0, fm hbt: 62,
22:20:40:458 71c watchdog - thread 0 (gpu0), hb time 16
22:20:40:461 71c watchdog - thread 1 (gpu0), hb time 296
22:20:40:466 9c8 GPU0 t=61C fan=23%
22:20:44:448 15a4 buf: {"result":["0x3adaf121174d67059316817f020b0ec15f2badd6a12e5f7c107301a6064f9840","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":0}


22:20:44:453 15a4 ETH: 06/27/18-22:20:44 - New job from exp-eu.dwarfpool.com:8018
22:20:44:457 15a4 target: 0x0000000225c17d04 (diff: 2000MH), epoch 41(1.32GB)
22:20:44:461 15a4 ETH - Total Speed: 15.127 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
22:20:44:467 15a4 ETH: GPU0 15.127 Mh/s

...

22:38:45:589 17bc DevFee: ETH: Stratum - connecting to 'us1.ethermine.org' <18.219.59.155> port 5555 (SSL/TLS)
22:38:48:573 15a4 ETH: checking pool connection...
22:38:48:577 15a4 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

22:38:49:607 15a4 buf: {"result":["0x11ec24fdab1318a342467c9aed4969ee16e9a27b3098ce480cf717396ce45441","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


22:38:49:607 17bc cert subject: /OU=Domain Control Validated/OU=EssentialSSL Wildcard/CN=*.ethermine.org
22:38:49:614 17bc cert issuer: /C=GB/ST=Greater Manchester/L=Salford/O=COMODO CA Limited/CN=COMODO RSA Domain Validation Secure Server CA
22:38:49:618 17bc SSL/TLS encryption is enabled
22:38:49:624 17bc sent: devfee auth
22:38:49:628 17bc DevFee: ETH: Stratum - Connected (us1.ethermine.org:5555) (SSL/TLS)
22:38:49:793 17bc buf: {"id":2,"jsonrpc":"2.0","result":true}

22:38:49:798 17bc ETH: Authorized
22:38:49:802 17bc sent: {"id":3,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

22:38:49:977 17bc buf: {"id":3,"jsonrpc":"2.0","result":["0xda86c705aecf1b87c6a3386c547cb80f0bed7321f3ddca788f6fbcd55c0a97ef","0x52341cf7371faf9a5a0105914ad69f04b0cabfc51d12a2a28a00d5b808ea4e5c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x597e2c"]}

22:38:49:982 17bc DevFee: start mining
22:38:50:347 16e0 Setting DAG epoch #195...
22:38:52:630 17bc buf: {"id":0,"jsonrpc":"2.0","result":["0xf7b0d6beddcf5975970482482932ed0432a62382acae7b9db3f83c19f04059fd","0x52341cf7371faf9a5a0105914ad69f04b0cabfc51d12a2a28a00d5b808ea4e5c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x597e2d"]}

22:38:52:635 17bc DevFee: ETH: 06/27/18-22:38:52 - New job from us1.ethermine.org:5555
22:38:52:639 17bc DevFee: target: 0x0000000112e0be82 (diff: 4000MH)
22:38:52:910 16e0 Setting DAG epoch #195 for GPU0
22:38:52:915 16e0 Create GPU buffer for GPU0
22:38:52:943 16e0 GPU0, OpenCL error -4 (0) - cannot create DAG on GPU

22:38:53:619 17bc buf: {"id":0,"jsonrpc":"2.0","result":["0x11fa4716bbdfb4a6f89bd6e8d6a71eed0d6787463f83056b04d48fcd03e31df5","0x52341cf7371faf9a5a0105914ad69f04b0cabfc51d12a2a28a00d5b808ea4e5c","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x597e2d"]}

22:38:53:623 17bc DevFee: ETH: 06/27/18-22:38:53 - New job from us1.ethermine.org:5555
22:38:53:628 17bc DevFee: target: 0x0000000112e0be82 (diff: 4000MH)
22:38:55:947 16e0 Set global fail flag, failed GPU0
22:38:55:952 16e0 GPU 0 failed
22:38:55:957 13a8 Setting DAG epoch #195 for GPU0
22:38:55:978 13a8 GPU0, OpenCL error -4 (0) - cannot create DAG on GPU

22:38:57:714 15a4 sent: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x0", "0x000000000000000000000000000000000000000000000000000000000daddfa5"]}

22:38:58:588 15a4 ETH: checking pool connection...
22:38:58:592 15a4 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

22:38:58:654 15a4 buf: {"id":6,"jsonrpc":"2.0","result":true}


22:38:58:983 13a8 Set global fail flag, failed GPU0
22:38:58:988 13a8 GPU 0 failed
22:38:59:642 15a4 buf: {"result":["0x11ec24fdab1318a342467c9aed4969ee16e9a27b3098ce480cf717396ce45441","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


22:39:08:603 15a4 ETH: checking pool connection...
22:39:08:607 15a4 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

22:39:08:693 15a4 buf: {"result":["0x11ec24fdab1318a342467c9aed4969ee16e9a27b3098ce480cf717396ce45441","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


22:39:10:979 71c em hbt: 0, fm hbt: 0,
22:39:10:983 71c watchdog - thread 0 (gpu0), hb time 14991
22:39:10:987 71c watchdog - thread 1 (gpu0), hb time 14991
22:39:10:992 71c WATCHDOG: GPU error, you need to restart miner :(
22:39:12:264 71c Restarting OK, exit...


If I change GPU_FORCE_64BIT_PTR to 1, however, it detects 4Gb of memory, but crashes on devfee silently:

Code:
23:32:52:812 9d0 Check and remove old log files...
23:32:52:816 9d0 args: -allcoins 1 -ewal ffca6794f123a989648d85d0657f750b4798283c/1 -epool exp-eu.dwarfpool.com:8018
23:32:52:818 9d0
23:32:52:821 9d0 浜様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様融
23:32:52:824 9d0                 Claymore's Dual GPU Miner - v11.8               
23:32:52:827 9d0               ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             
23:32:52:829 9d0 藩様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様夕
23:32:52:832 9d0
23:32:52:834 9d0 b591
23:32:53:037 9d0 ETH: 1 pool is specified
23:32:53:040 9d0 Main Ethereum pool is exp-eu.dwarfpool.com:8018
23:32:53:044 9d0 DCR: 0 pool is specified
23:32:53:756 9d0 OpenCL platform: AMD Accelerated Parallel Processing
23:32:53:759 9d0 OpenCL platform: Intel(R) OpenCL
23:32:53:762 9d0 OpenCL initializing...

23:32:53:766 9d0 AMD Cards available: 1
23:32:53:770 9d0 GPU #0: Pitcairn (AMD Radeon (TM) R7 370 Series), 4096 MB available, 16 compute units (pci bus 1:0:0)
23:32:53:772 9d0 POOL/SOLO version
23:32:53:775 9d0 Platform: Windows
23:32:53:927 9d0 start building OpenCL program for GPU 0...
23:32:53:959 9d0 done
23:32:54:180 9d0 GPU #0: algorithm ASM 1
23:32:54:183 9d0 cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
23:32:54:186 9d0 No NVIDIA CUDA GPUs detected.
23:32:54:192 9d0 Total cards: 1
23:32:58:196 9d0 No NVIDIA cards in the list, NVML library will not be used.
23:32:59:252 9d0 SSL: Imported 56 certificates from local storage
23:32:59:277 151c ETH: Stratum - connecting to 'exp-eu.dwarfpool.com' <37.48.109.37> port 8018 (unsecure)
23:32:59:346 151c sent: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["ffca6794f123a989648d85d0657f750b4798283c/1", ""], "id": 2, "method": "eth_submitLogin"}

23:32:59:350 151c ETH: Stratum - Connected (exp-eu.dwarfpool.com:8018) (unsecure)
23:32:59:357 9d0 No pool specified for Decred! Ethereum-only mining mode is enabled

23:32:59:363 9d0 ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)

23:32:59:367 9d0 ETH: eth-proxy stratum mode
23:32:59:370 9d0 "-allcoins" option is set, default pools will be used for devfee, check "Readme" file for details.
23:32:59:376 9d0 Watchdog enabled
23:32:59:381 9d0 Remote management (READ-ONLY MODE) is enabled on port 3333
23:32:59:384 9d0

23:32:59:389 9d0 You did not specify -dcri values directly, so they will be detected automatically
23:32:59:395 9d0 Automatic detection of best -dcri values started, please wait...

23:32:59:403 151c buf: {"id":2,"jsonrpc":"2.0","result":true}

23:32:59:407 151c ETH: Authorized
23:32:59:411 151c sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

23:32:59:464 151c buf: {"result":["0x8760049f8aec78492cd3894359f383da88fea1040b924382ec459a625b30ca9d","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


23:32:59:522 1c8 Setting DAG epoch #41...
23:33:00:820 1c8 Setting DAG epoch #41 for GPU0
23:33:00:824 1c8 Create GPU buffer for GPU0
23:33:06:059 1c8 GPU0 DAG creation time - 5220 ms
23:33:06:064 1c8 Setting DAG epoch #41 for GPU0 done
23:33:09:477 151c ETH: checking pool connection...
23:33:09:484 151c sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

23:33:09:531 151c buf: {"result":["0x8760049f8aec78492cd3894359f383da88fea1040b924382ec459a625b30ca9d","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


23:33:16:513 1c8 gd 0.72
23:33:17:053 143c GPU #0: apply best detected -dcri value: 50
23:33:17:057 143c Automatic detection of best -dcri values completed
23:33:19:477 151c sent: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0xe6e9c5", "0x0000000000000000000000000000000000000000000000000000000017024390"]}

23:33:19:493 151c ETH: checking pool connection...
23:33:19:496 151c sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

23:33:19:526 151c buf: {"id":6,"jsonrpc":"2.0","result":true}


23:33:19:572 151c buf: {"result":["0x8760049f8aec78492cd3894359f383da88fea1040b924382ec459a625b30ca9d","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


23:33:23:061 143c em hbt: 0, fm hbt: 62,
23:33:23:065 143c watchdog - thread 0 (gpu0), hb time 375
23:33:23:069 143c watchdog - thread 1 (gpu0), hb time 94
23:33:23:073 1374 GPU0 t=60C fan=21%
23:33:29:507 151c ETH: checking pool connection...
23:33:29:511 151c sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

23:33:29:557 151c buf: {"result":["0x8760049f8aec78492cd3894359f383da88fea1040b924382ec459a625b30ca9d","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


23:33:39:492 151c sent: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0xe6db7a", "0x0000000000000000000000000000000000000000000000000000000017024390"]}

23:33:39:523 151c ETH: checking pool connection...
23:33:39:526 151c sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

23:33:39:541 151c buf: {"id":6,"jsonrpc":"2.0","result":true}


23:33:39:587 151c buf: {"result":["0x8760049f8aec78492cd3894359f383da88fea1040b924382ec459a625b30ca9d","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


23:33:49:538 151c ETH: checking pool connection...
23:33:49:542 151c sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

23:33:49:589 151c buf: {"result":["0x8760049f8aec78492cd3894359f383da88fea1040b924382ec459a625b30ca9d","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


23:33:53:074 143c em hbt: 0, fm hbt: 78,
23:33:53:078 143c watchdog - thread 0 (gpu0), hb time 546
23:33:53:082 143c watchdog - thread 1 (gpu0), hb time 280
23:33:53:092 1374 GPU0 t=71C fan=36%
23:33:59:507 151c sent: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0xe6cf80", "0x0000000000000000000000000000000000000000000000000000000017024390"]}

23:33:59:553 151c ETH: checking pool connection...
23:33:59:557 151c sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

23:33:59:562 151c buf: {"id":6,"jsonrpc":"2.0","result":true}


23:33:59:605 151c buf: {"result":["0x8760049f8aec78492cd3894359f383da88fea1040b924382ec459a625b30ca9d","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


23:34:00:008 151c buf: {"result":["0xba936d1b05d0c0ff253ff031a420974f194515aee91177c59b2c88852d8bfe4e","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":0}


23:34:00:012 151c ETH: 06/27/18-23:34:00 - New job from exp-eu.dwarfpool.com:8018
23:34:00:015 151c target: 0x0000000225c17d04 (diff: 2000MH), epoch 41(1.32GB)
23:34:00:020 151c ETH - Total Speed: 15.133 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01
23:34:00:024 151c ETH: GPU0 15.133 Mh/s

...

23:50:58:254 159c DevFee: ETH: Stratum - connecting to 'eth-eu.dwarfpool.com' <178.33.35.1> port 8008 (unsecure)
23:50:58:315 159c sent: devfee auth
23:50:58:321 159c DevFee: ETH: Stratum - Connected (eth-eu.dwarfpool.com:8008) (unsecure)
23:50:58:365 159c buf: {"id":2,"jsonrpc":"2.0","result":true}

23:50:58:369 159c ETH: Authorized
23:50:58:374 159c sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

23:50:58:428 159c buf: {"result":["0x8814f0c439ff96f13da15f2afea49e6a6854b77b1d98eff25f1b50c7cc5e152f","0x52341cf7371faf9a5a0105914ad69f04b0cabfc51d12a2a28a00d5b808ea4e5c","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


23:50:58:432 159c DevFee: start mining
23:50:58:753 1c8 Setting DAG epoch #195...
23:51:01:110 151c ETH: checking pool connection...
23:51:01:114 151c sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

23:51:01:162 151c buf: {"result":["0xa5b9440908e75772f1aa4ff600bda31de52c0c425042685a83be233389ffa3c2","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


23:51:01:267 1c8 Setting DAG epoch #195 for GPU0
23:51:01:271 1c8 Create GPU buffer for GPU0
23:51:08:443 159c DevFee: ETH: checking pool connection...
23:51:08:447 159c sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

23:51:08:495 159c buf: {"result":["0x8814f0c439ff96f13da15f2afea49e6a6854b77b1d98eff25f1b50c7cc5e152f","0x52341cf7371faf9a5a0105914ad69f04b0cabfc51d12a2a28a00d5b808ea4e5c","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


23:51:10:479 159c buf: {"result":["0x8a2c8dafdc3527a1e0dff1a35a193defa6c884eb8b4fa6f55f2c8522a8c8ad41","0x52341cf7371faf9a5a0105914ad69f04b0cabfc51d12a2a28a00d5b808ea4e5c","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":0}


23:51:10:484 159c DevFee: ETH: 06/27/18-23:51:10 - New job from eth-eu.dwarfpool.com:8008
23:51:10:488 159c DevFee: target: 0x0000000225c17d04 (diff: 2000MH)
23:51:11:126 151c ETH: checking pool connection...
23:51:11:133 151c sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

23:51:11:181 151c buf: {"result":["0xa5b9440908e75772f1aa4ff600bda31de52c0c425042685a83be233389ffa3c2","0x1730dd810f27fdefcac730fcab75814b7286002ecf541af5cdf7875440203215","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


23:51:11:417 1c8 GPU0 DAG creation time - 10057 ms
23:51:11:422 1c8 Setting DAG epoch #195 for GPU0 done

I include the miner in my software, so it's best when it works "by default".
Could it, for example, mine EXP devfee, like it used to do in v10.6? Or predict/handle the reallocation failure somehow?

Passing -allcoins -1 or -allcoins epoch works, but the first one annoyingly delays first hashrate results for the user, and supplying the epoch number is tricky. Also, I'm now sure how to avoid breaking things for users that don't need it.
Pages: « 1 ... 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 [1219] 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 ... 1336 »
  Print  
 
Jump to:  

Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!