MATHReX
|
|
June 13, 2019, 08:26:34 AM |
|
I've left the rig for more than 12 hours. I don't know how you disabled your updates but I can assure you that mine aren't running. The OS is running for more than a year and the build version is 1 year old, that's when I disabled them. I said that I tried with another drive, with another Win10 installation and it's the same. A reboot doesn't fix the issue for a day or two. This happens 30 to 60 minutes after reboot. The CPU is more than capable to run Win10. My main PC uses an I7-2600k which is 4 years older and it's running Win10 fine. Lots of new notebooks made in the last 1-2 years, which come with the "Win10 Compatible" logo have slower CPU's than this Celeron. The CPU is not the problem.
Okay, I'm going to recommend installing Windows 10 LTSB version without the internet and then disabling all the options related to updates. Then connect and install the latest Nvidia driver manually. At first plug in just one card. If everything goes smooth, then second and go on until all the cards are plugged. It might be a card malfunctioning or OS related issue.
|
|
|
|
|
|
|
|
There are several different types of Bitcoin clients. The most secure are full nodes like Bitcoin Core, which will follow the rules of the network no matter what miners do. Even if every miner decided to create 1000 bitcoins per block, full nodes would stick to the rules and reject those blocks.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
KGV
Newbie
Offline
Activity: 55
Merit: 0
|
|
June 13, 2019, 08:46:39 PM Last edit: June 14, 2019, 01:45:11 PM by KGV |
|
2 Claymore.
When i change to new version 14.6 from version 12, i noticed that i start to get some incorrect shares in miner. Not a lot, maybe 5-10 from 24hrs on 7 cards rig. But when you have 20 rigs this is a lot. I do not use any strap option or else. I do not change any overclock settings or else. All is same. I use only -rxboost option. Rigs all 'red'. 14.6 gives some incorrect shares, 12 is not. Can you check what is problem and fix it.
|
|
|
|
lipcsey
Newbie
Offline
Activity: 2
Merit: 0
|
|
June 13, 2019, 09:45:39 PM |
|
Anyone experienced a (reference card) 1080 getting wrecked on -strap 2 after a week or so? or any other card for that matter.
Thanks
|
|
|
|
|
Er0l
Newbie
Offline
Activity: 36
Merit: 0
|
|
June 14, 2019, 12:12:48 PM |
|
2 Claymore.
When i change to new version 14.6 from version 12, i noticed that i start to get some invalid shares in miner. Not a lot, maybe 5-10 from 24hrs on 7 cards rig. But when you have 20 rigs this is a lot. I do not use any strap option or else. I do not change any overclock settings or else. All is same. I use only -rxboost option. Rigs all 'red'. 14.6 gives some invalid shares, 12 is not. Can you check what is problem and fix it.
I fixxed it giving more core Voltage, i bet you UV is too much. Also try -asm 2
|
|
|
|
KGV
Newbie
Offline
Activity: 55
Merit: 0
|
|
June 14, 2019, 02:33:01 PM |
|
2 Claymore.
When i change to new version 14.6 from version 12, i noticed that i start to get some invalid shares in miner. Not a lot, maybe 5-10 from 24hrs on 7 cards rig. But when you have 20 rigs this is a lot. I do not use any strap option or else. I do not change any overclock settings or else. All is same. I use only -rxboost option. Rigs all 'red'. 14.6 gives some invalid shares, 12 is not. Can you check what is problem and fix it.
I fixxed it giving more core Voltage, i bet you UV is too much. Also try -asm 2 I'm not going to rise voltage. But I will try -esm 2. thanks
|
|
|
|
Lunga Chung
Member
Offline
Activity: 277
Merit: 23
|
|
June 14, 2019, 03:09:49 PM |
|
2 Claymore.
When i change to new version 14.6 from version 12, i noticed that i start to get some invalid shares in miner. Not a lot, maybe 5-10 from 24hrs on 7 cards rig. But when you have 20 rigs this is a lot. I do not use any strap option or else. I do not change any overclock settings or else. All is same. I use only -rxboost option. Rigs all 'red'. 14.6 gives some invalid shares, 12 is not. Can you check what is problem and fix it.
I fixxed it giving more core Voltage, i bet you UV is too much. Also try -asm 2 I'm not going to rise voltage. But I will try -esm 2. thanks mem temp is the issue crank fans up to 80%, this solved for me
|
|
|
|
FFI2013
|
|
June 15, 2019, 11:33:25 AM |
|
2 Claymore.
When i change to new version 14.6 from version 12, i noticed that i start to get some invalid shares in miner. Not a lot, maybe 5-10 from 24hrs on 7 cards rig. But when you have 20 rigs this is a lot. I do not use any strap option or else. I do not change any overclock settings or else. All is same. I use only -rxboost option. Rigs all 'red'. 14.6 gives some invalid shares, 12 is not. Can you check what is problem and fix it.
I fixxed it giving more core Voltage, i bet you UV is too much. Also try -asm 2 I'm not going to rise voltage. But I will try -esm 2. thanks mem temp is the issue crank fans up to 80%, this solved for me The same is happening to me not on every card maybe 2 on each rig, before you cranked it up to 80% where you temps normal I have mine set at 65% just trying to see if maybe raising it would help even though my cards are cool
|
|
|
|
Lunga Chung
Member
Offline
Activity: 277
Merit: 23
|
|
June 15, 2019, 01:44:42 PM |
|
2 Claymore.
When i change to new version 14.6 from version 12, i noticed that i start to get some invalid shares in miner. Not a lot, maybe 5-10 from 24hrs on 7 cards rig. But when you have 20 rigs this is a lot. I do not use any strap option or else. I do not change any overclock settings or else. All is same. I use only -rxboost option. Rigs all 'red'. 14.6 gives some invalid shares, 12 is not. Can you check what is problem and fix it.
I fixxed it giving more core Voltage, i bet you UV is too much. Also try -asm 2 I'm not going to rise voltage. But I will try -esm 2. thanks mem temp is the issue crank fans up to 80%, this solved for me The same is happening to me not on every card maybe 2 on each rig, before you cranked it up to 80% where you temps normal I have mine set at 65% just trying to see if maybe raising it would help even though my cards are cool Mine are around 60~65c but thats just the core, you don't have thermal sensors on memory (which is much hotter). What is your ambient temp ?
|
|
|
|
Dark Oopa
Newbie
Offline
Activity: 83
Merit: 0
|
|
June 15, 2019, 03:29:28 PM |
|
Hello, last week end I updated my rigs from v12.0. I set only rx boost 1, without touching the straps. I don't have share problems but it seems that my hashrate on the pool is lower now while the miner says its higher. I use mining rig rental. Anyone with the problem?
|
|
|
|
darkCryptoMiner
Newbie
Offline
Activity: 30
Merit: 0
|
|
June 15, 2019, 03:34:40 PM |
|
Hello, last week end I updated my rigs from v12.0. I set only rx boost 1, without touching the straps. I don't have share problems but it seems that my hashrate on the pool is lower now while the miner says its higher. I use mining rig rental. Anyone with the problem?
Not too sure this applies to you. I have been having this issue with nanopool in the last 24 hours (tested another miner and seemed to be the same) - about 15-20% lower. Swapped to ethermine as a test and that seems to be better at the moment.
|
|
|
|
ArmenianCracker
Newbie
Offline
Activity: 3
Merit: 0
|
|
June 15, 2019, 04:00:26 PM |
|
Hi there, i woud like to know did the author of this program planing to add optimized timings for AMD Radeon VII, if yes then when approximatly???Thanks
I could be woefully wrong about this, but I thought Radeon VII was core limited not memory limited. If this is the case, optimized memory timings won't help. I thought Radeon VII's were already getting 90MH/s with just a refresh rate tweak. I could also be wrong, but there are a few users over in the AMDTweakTool thread that have them. Check there. I'm already getting about 90MH/s with nothing more than AMD Afterburner tweaks. I am geting 90MH/S +- 1-2MH/S on my Radeon VII too with HBM2 memory from Hynix with 956mv/CLK 1750mhz mem 1200mhz, but i think when -strape function will work on Redeon VII we can get more maybe 95 or 96mh/s on Etherium. [/quote]
|
|
|
|
quejo
Newbie
Offline
Activity: 3
Merit: 0
|
|
June 15, 2019, 06:04:56 PM |
|
and for me it was so. the solution for me: open windows powershell (administrator) you enter : " bcdedit -set TESTSIGNING off ".this deactivates the test mode. restart the computer and start claymore.the program shows a red sign that it is not in test mode and restarts again. it should be fine now
worked once. asa a reboot was made hashrate dropped from 375 to 320. Already tried everything. When claymore tries to install driver after disabling test mode windows pops up a warning about unsigned driver installation. After reboot windows start in test mode so its supposed that driver was successfully installed but then the same hashrate. heres my config file -asm 2 -gser 1 -tt 60 -ttli 65 -wd 0 -cclock 1150 -y 1 -mode 1 -dbg -1 -powlim 20 -strap 5@2040,1@1900,1@1750,5@2000,1@1750,1@2000,1@1930,5@2000,2@1850,1@1850,1@1750,1@1900,1@2000 -rxboost 1 -cvddc 875,875,875,875,875,900,875,900,850,875,850,800,875 -mvddc 875,875,875,875,875,900,875,900,850,875,850,800,875 when i found that voltages values i figured out that somehow core voltage and memory voltage were linked so if i decrease core without also decreasing memory voltage it wont work. do you face the same behavior?
|
|
|
|
defoto
Newbie
Offline
Activity: 16
Merit: 0
|
|
June 15, 2019, 06:56:21 PM |
|
-epsw x -asm 2 -mode 1 -rxboost 1 -esm 3 -allpools 1 -estale 0 -strap POL8H2,POL8M2,POL8M2,POL8S1,POL8S1,POL8S1,POL8S1,POL8M2 -cclock 1250,1250,1250,1250,1250,1250,1250,1250 -cvddc 900,900,900,900,900,900,900,900 -mclock 2230,2230,2230,2150,2180,2180,2140,2230 -mvddc 900,900,900,900,900,900,900,900 -tt 62 -fanmin 0 -fanmax 70 this is 8 rx580 8gb - 266.7 mh/s ,1200 w
|
|
|
|
Xazax310
Member
Offline
Activity: 246
Merit: 24
|
|
June 15, 2019, 07:45:16 PM |
|
Hello all, I recently acquired a bunch of RX470s and was hoping to use Claymores 14.6 STRAPs but no luck. I need some help. When I use -STRAP option the miner will apply STRAP 1 to GPU 0, then GPU 1, then the computer crashes and restarts. Everytime it doesnt matter what I do, voltages etc. If I apply the STRAP to only GPU 0 it will work fine, however, if I apply it to GPU 1, 2, 3 etc even one other GPU instant crash and Windows reboots. I'm at a total loss of what's causing it. The miner works perfectly normal as long as I avoid the STRAP option. RXBOOST works perfectly fine. Seeking help or ideas! Rig 13 RX470s H110 Pro BTC+ G3930, 4GB RAM, 450w PSU 2400w DELTA PSU for cards Windows 1903 Build(May release) AMD 19.5.1 drivers
|
|
|
|
dormancygrace
Newbie
Offline
Activity: 4
Merit: 0
|
|
June 15, 2019, 08:22:37 PM |
|
Hi! Can you make double memory kernels for gpus with enough ram? Like it is done in PhoenixMiner?
|
|
|
|
bperryman
Newbie
Offline
Activity: 21
Merit: 0
|
|
June 15, 2019, 11:12:23 PM |
|
Is there any chance that you could tweak your Blake2b algorithm to allow for GlobalToken and TitleNetwork variants? I know they're very similar to old Sia.
|
|
|
|
ngohungvi
Newbie
Offline
Activity: 11
Merit: 0
|
|
June 16, 2019, 11:25:40 AM |
|
Can current graphics cards with 3G Vram mine ETH? (GTX 1060 3G , p106-090 3G,v.v...) Thank you.
|
|
|
|
Dr_Victor
|
|
June 16, 2019, 11:31:34 AM |
|
Can current graphics cards with 3G Vram mine ETH? (GTX 1060 3G , p106-090 3G,v.v...) Thank you.
Unfortunately, no
|
yobit.net is banned from signatures
|
|
|
Xazax310
Member
Offline
Activity: 246
Merit: 24
|
|
June 16, 2019, 03:08:58 PM |
|
Can current graphics cards with 3G Vram mine ETH? (GTX 1060 3G , p106-090 3G,v.v...) Thank you.
No, ETH/ETC are over the 3GB DAG limit and can never mine ETH again. You can try other lower dag coins like CLO,UBQ,EXP, etc
|
|
|
|
|