Epoch
Legendary
Offline
Activity: 922
Merit: 1003
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2012, 12:42:41 AM |
|
C5 exception means that a pointer to an unallocated memory was accessed.
It is probably coding error in some logging function (%s vs %d would be my first choice).
Try real quiet option to disable all output.
--real-quiet
It is worth to try.
yes.... working...... it shows messages like submit staleshares!! but no other infos anymore? There you go. Problem solved. Bug is still there. Nice bit of diagnosing, af_newbie! I have tried to reproduce Tinua's issue with the cgminer crash using 11 Singles. I used cgminer 2.3.6 on Windows 7/64. Result: it works fine for me. All 11 are detected, and cgminer is able to mine with all 11 without any issue (other than a minor display formatting issue for the status line for the 11th Single ... BFL10 ... it is offset by 1 character). Again, note that I have used Windows 7/64 for this trial; Tinua found the issue on Windows 8/64.
|
|
|
|
Chefnet
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2012, 06:31:04 AM |
|
tinua do you use a german or english version of windows?
|
|
|
|
cuz0882
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2012, 07:22:24 AM |
|
cgminer does not seem to detect my connected bfl single ... is there a setting that i'm missing?
If you are in Windows, your basic command line should look something like this: cgminer -o <pool> -u <user> -p <pass> --disable-gpu -S COM6 The '-S COM6' is the relevant part for your Single. It happens to be COM6 for me, but it will likely be something else for you. You'll need to open up Device Manager, go to the Ports section, and you should see an entry that looks like 'USB Serial Port (COMx)'. Whatever 'COMx' is in your case, that's what you put into cgminer's '-S COMx' setting. Then your Single should be detected. edit: I should add that if your COM port is greater than 9, you need to use the 'longhand' form for cgminer. So if, for example, your assigned COM port for your Single was COM12, your command line would need to look like this: cgminer -o <pool> -u <user> -p <pass> --disable-gpu -S \\.\COM12 I've only used the config file for settings, can this not be done from there? Also I've never been clear, when you say command line are you referring to running it from the command prompt?
|
|
|
|
Tinua
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2012, 10:05:46 AM |
|
tinua do you use a german or english version of windows?
I use "Windows8-ConsumerPreview-64bit-German" I will try this evening with Win7/64 like Epoch do, but with german version and see what happen.
|
|
|
|
RedLine888
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2012, 12:10:00 PM |
|
Hi guys! Updated CGminer to 2.3.6 and Catalyst to 12.4 and the framerate has dropped on my 3x5870 GPUs, 6950 is OK!
I cleaned OS from all drivers and 2.6 SDK, installed 2.5 SDK and 12.4 drivers and I can not return the performance back.
3x5870 are below 400 MH\s, I am used to see them working at ~430-450 MH\s.
Please tell me how to configure CGminer or OS to get MAXIMUM performance!
THANX
My CGminer config:
cgminer -o *** -u *** -p *** -I d,10,10,10 --gpu-fan 80-100 --gpu-engine 850,970-990,920,960 --gpu-memclock 300 ll ll ll ll V V V V 6950, 5870, 5870, 5870
|
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4214
Merit: 1644
Ruu \o/
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2012, 12:16:44 PM |
|
Hi guys! Updated CGminer to 2.3.6 and Catalyst to 12.4 and the framerate has dropped on my 3x5870 GPUs, 6950 is OK!
I cleaned OS from all drivers and 2.6 SDK, installed 2.5 SDK and 12.4 drivers and I can not return the performance back.
3x5870 are below 400 MH\s, I am used to see them working at ~430-450 MH\s.
Please tell me how to configure CGminer or OS to get MAXIMUM performance!
THANX
My CGminer config:
cgminer -o *** -u *** -p *** -I d,10,10,10 --gpu-fan 80-100 --gpu-engine 850,970-990,920,960 --gpu-memclock 300 ll ll ll ll V V V V 6950, 5870, 5870, 5870
As per the readme... delete the .bin files when you change SDKs if you want the new SDK to "take".
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
RedLine888
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2012, 12:24:06 PM |
|
Have done it, nothing changed!
And there is another thing:
clocks for 5870 GPUs are different but their hashrate is the same, why???
Created .bin are: phatk120223Caymanv2w128l4 phatk120223Cypressv2w128l4
|
|
|
|
RedLine888
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2012, 12:46:40 PM |
|
Hi guys! Updated CGminer to 2.3.6 and Catalyst to 12.4 and the framerate has dropped on my 3x5870 GPUs, 6950 is OK!
I cleaned OS from all drivers and 2.6 SDK, installed 2.5 SDK and 12.4 drivers and I can not return the performance back.
3x5870 are below 400 MH\s, I am used to see them working at ~430-450 MH\s.
Please tell me how to configure CGminer or OS to get MAXIMUM performance!
THANX
My CGminer config:
cgminer -o *** -u *** -p *** -I d,10,10,10 --gpu-fan 80-100 --gpu-engine 850,970-990,920,960 --gpu-memclock 300 ll ll ll ll V V V V 6950, 5870, 5870, 5870
Deleted .bin files after for miner to create new ones.
Created .bin are: phatk120223Caymanv2w128l4 phatk120223Cypressv2w128l4
And there is another thing:
clocks for 5870 GPUs are different but their hashrate is the same, why???
|
|
|
|
rkozola
Newbie
Offline
Activity: 36
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2012, 01:11:52 PM |
|
12.4 broke something and requires dummy plugs in order for cards not to be throttled by ulps.
|
|
|
|
Epoch
Legendary
Offline
Activity: 922
Merit: 1003
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2012, 03:11:29 PM |
|
cgminer does not seem to detect my connected bfl single ... is there a setting that i'm missing?
If you are in Windows, your basic command line should look something like this: cgminer -o <pool> -u <user> -p <pass> --disable-gpu -S COM6 The '-S COM6' is the relevant part for your Single. It happens to be COM6 for me, but it will likely be something else for you. You'll need to open up Device Manager, go to the Ports section, and you should see an entry that looks like 'USB Serial Port (COMx)'. Whatever 'COMx' is in your case, that's what you put into cgminer's '-S COMx' setting. Then your Single should be detected. edit: I should add that if your COM port is greater than 9, you need to use the 'longhand' form for cgminer. So if, for example, your assigned COM port for your Single was COM12, your command line would need to look like this: cgminer -o <pool> -u <user> -p <pass> --disable-gpu -S \\.\COM12 I've only used the config file for settings, can this not be done from there? Also I've never been clear, when you say command line are you referring to running it from the command prompt? I think you and I are on opposite sides of the same boat: you've only used the config file and I've only used the 'command prompt' (to use your terminology). ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Actually to be more specific, I tend to debug my parameters using the command prompt and then, when I confirm cgminer is working as I want, I create a .bat file to execute it directly with those parameters.
|
|
|
|
RedLine888
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2012, 03:25:33 PM |
|
Disabled ulps! NOTHING changed
|
|
|
|
Fiyasko
Legendary
Offline
Activity: 1428
Merit: 1001
Okey Dokey Lokey
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2012, 03:37:15 PM |
|
12.4 broke something and requires dummy plugs in order for cards not to be throttled by ulps.
It's fucking true, Dont touch 12.4, I was FUDGED for 2days
|
|
|
|
Tinua
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2012, 04:33:13 PM |
|
C5 exception means that a pointer to an unallocated memory was accessed.
It is probably coding error in some logging function (%s vs %d would be my first choice).
Try real quiet option to disable all output.
--real-quiet
It is worth to try.
yes.... working...... it shows messages like submit staleshares!! but no other infos anymore? There you go. Problem solved. Bug is still there. Nice bit of diagnosing, af_newbie! I have tried to reproduce Tinua's issue with the cgminer crash using 11 Singles. I used cgminer 2.3.6 on Windows 7/64. Result: it works fine for me. All 11 are detected, and cgminer is able to mine with all 11 without any issue (other than a minor display formatting issue for the status line for the 11th Single ... BFL10 ... it is offset by 1 character). Again, note that I have used Windows 7/64 for this trial; Tinua found the issue on Windows 8/64. Hi Epoch I make some test with Win7/64 and Win/64 again. If I open cgminer direct with "cgminer.bat", it will crash with 10 BFL's! With bigger computer-display and bigger resolution, crash with 12 BFL's! If I open first "cmd.exe" and make the command-window more big (fullscreen), then start "cgminer.bat"......cgminer works with all BFL's!!It looks like, if cgminer have not enought space in the window for show his full statistic...then he crash! http://www.fileswap.com/dl/2l63LapiXl/CGminer1.jpg.html http://www.fileswap.com/dl/IzRRELG87/cgminer2.jpg.htmlThats really windowslike ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Is it possible, that I can tell windows in the "cgminer.bat", that the window must be more big (fullscreen) for start? Regards Tinu
|
|
|
|
Luke-Jr
Legendary
Offline
Activity: 2576
Merit: 1186
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2012, 04:41:03 PM |
|
Is it possible, that I can tell windows in the "cgminer.bat", that the window must be more big (fullscreen) for start? I think ye can do this with a PIF file.
|
|
|
|
Epoch
Legendary
Offline
Activity: 922
Merit: 1003
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2012, 04:54:54 PM |
|
Is it possible, that I can tell windows in the "cgminer.bat", that the window must be more big (fullscreen) for start? I think ye can do this with a PIF file. I'm not near my Win7 machines now, but I *think* the way I have done this is to: 1. click Start->Run, type "cmd", hit <enter> 2. a command prompt window will appear in its default size. 3. click the icon in the top-left corner of its title bar to bring down the system menu 4. click 'Properties' to bring up a dialog box. 5. (optional): in the Font tab choose your preferred font and size. 6. (important): in the Layout tab set the Windows Size to Width:100, Height:40 7. click 'ok' to dismiss the dialog. 8. close the command prompt window Now when you run any command prompt again, it will come up in this new size. Double-click your .bat file, and the command prompt window that opens should have the new dimensions. I am quite certain I have set my window size to Width:100 and Height:40 (other similar values have worked as well). You may be right that cgminer will crash in its default size of 80:25 ... I've never tried that as 80:25 is too small for what I like to see. Let us know how you make out.
|
|
|
|
Tinua
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2012, 05:19:04 PM Last edit: May 02, 2012, 06:12:55 PM by Tinua |
|
Is it possible, that I can tell windows in the "cgminer.bat", that the window must be more big (fullscreen) for start? I think ye can do this with a PIF file. I'm not near my Win7 machines now, but I *think* the way I have done this is to: 1. click Start->Run, type "cmd", hit <enter> 2. a command prompt window will appear in its default size. 3. click the icon in the top-left corner of its title bar to bring down the system menu 4. click 'Properties' to bring up a dialog box. 5. (optional): in the Font tab choose your preferred font and size. 6. (important): in the Layout tab set the Windows Size to Width:100, Height:40 7. click 'ok' to dismiss the dialog. 8. close the command prompt window Now when you run any command prompt again, it will come up in this new size. Double-click your .bat file, and the command prompt window that opens should have the new dimensions. I am quite certain I have set my window size to Width:100 and Height:40 (other similar values have worked as well). You may be right that cgminer will crash in its default size of 80:25 ... I've never tried that as 80:25 is too small for what I like to see. Let us know how you make out. YES u great! WORKING Making window-size to 80:50! Many thanks!!!!!!!!!! Edit: @Epoch :Tip is on the way @af_newbie: Tip is on the way
|
|
|
|
jddebug
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2012, 05:19:30 PM |
|
Is it possible, that I can tell windows in the "cgminer.bat", that the window must be more big (fullscreen) for start? I think ye can do this with a PIF file. I'm not near my Win7 machines now, but I *think* the way I have done this is to: 1. click Start->Run, type "cmd", hit <enter> 2. a command prompt window will appear in its default size. 3. click the icon in the top-left corner of its title bar to bring down the system menu 4. click 'Properties' to bring up a dialog box. 5. (optional): in the Font tab choose your preferred font and size. 6. (important): in the Layout tab set the Windows Size to Width:100, Height:40 7. click 'ok' to dismiss the dialog. 8. close the command prompt window Now when you run any command prompt again, it will come up in this new size. Double-click your .bat file, and the command prompt window that opens should have the new dimensions. I am quite certain I have set my window size to Width:100 and Height:40 (other similar values have worked as well). You may be right that cgminer will crash in its default size of 80:25 ... I've never tried that as 80:25 is too small for what I like to see. Let us know how you make out. Hell ya, I am so grateful for that information. Thank you. Worked perfectly.
|
|
|
|
Epoch
Legendary
Offline
Activity: 922
Merit: 1003
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2012, 09:43:58 PM |
|
@Epoch :Tip is on the way @af_newbie: Tip is on the way
Much appreciated. Glad you are up and running.
|
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4214
Merit: 1644
Ruu \o/
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2012, 09:50:11 PM |
|
One of the reasons I limited a previous version to only displaying 8 devices. Sigh. The interface was never designed with so many devices in mind and with that many you should really be using a different front end via the API instead.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
generalfault
Newbie
Offline
Activity: 26
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2012, 10:24:27 PM |
|
Error when CGMINER compiling. Versions 2.3.4-2.3.6. Versions 2.3.1-2.3.3 compiles fine. CC usage.o AR libccan.a make[2]: Leaving directory `/home/kanotix/cgminer-2.3.6/ccan' make[2]: Entering directory `/home/kanotix/cgminer-2.3.6' CC cgminer-cgminer.o CC cgminer-util.o CC cgminer-sha2.o CC cgminer-api.o api.c: In function ‘api’: api.c:2409: error: label at end of compound statement make[2]: *** [cgminer-api.o] Error 1 make[2]: Leaving directory `/home/kanotix/cgminer-2.3.6' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/kanotix/cgminer-2.3.6' make: *** [all] Error 2 Tested with NVIDIA and ATi/AMD OpenCL's. OS: Linux x86. GCC: 4.3. Well all I can guess is there must be something wrong with your compiler or something messed up about your git pull/clone or some issue with the ./configure options you used. The "die:" label has been there since 2011-11-24 (go to https://github.com/ckolivas/cgminer/blame/master/api.c to check for yourself) Also the code compiles fine on quite a few architectures including xubuntu, fedora 16, debian, MinGW on windows I've even just done another git pull and compiled it. What git pull/clone command did you use and what ./configure command did you use? If you pulled on top of an old version, make sure you './autogen.sh' './configure --xxx' and 'make clean' again before compiling. okey, so here is my 2cents There is something funky about this file. I'm on Centos 5.X and getting this error. to fix, add a semicoln on the line after die: it should look like this: die: ; pthread_cleanup_pop(true);
and then all is well It shouldn't be need, but it is... I have no idea why....
|
|
|
|
|