Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[cryptoc19]

Do you have the same problem using other miners (not Claymore's) ?

[Trimegistus]

I'm getting better results with this miner, compared to Genoil's or the Homestead versions.

My only problem is loosing 5% ETH shares when in dual mining mode.

But that might be related with the fact that I'm using a mix of 270x with 7950.

@Claymore, any progress optimizing your code for the 270x?

[citronick]

Do you have the same problem using other miners (not Claymore's) ?

etherminer, qtminer all works ok.

But the Claymore v2 doesn't work.

However, on ETH and DCR mining, i am getting very good results on ethermine.org with no invalids.
DCR however gives me 8-9% invalids -- but this is probably due to zpool stratum which I mine DCR,
because other DCR pools, reports lower invalids %

I have replaced qtminer.exe on all my rigs with Claymore's DM v2, even at dual mining mode I am getting very stable performance from my 390s.

[dominuspro]

Does anyone have shares displayed correctly on ethermine.org ?  I mean in the "Shares (Invalid / Valid / %)" column..
Claymore's miner does submit ( and only valids! ) and I am obviously getting paid for them, but they're not displayed like I said (tried both with v1.2 and with v2.0).

yes, i have same issue.

I am still paid but the dashboard (bottom page with graphs) doesn't report any hash and funny thing is the summary on top of the ethermine.org, it correctly sum up total mhs for all my rigs. I suspect its the way etherminer is coded but then again qtminer.exe works too, but not the dual miner.

Put -esm 1 in your bat 

[citronick]

Does anyone have shares displayed correctly on ethermine.org ?  I mean in the "Shares (Invalid / Valid / %)" column..
Claymore's miner does submit ( and only valids! ) and I am obviously getting paid for them, but they're not displayed like I said (tried both with v1.2 and with v2.0).

yes, i have same issue.

I am still paid but the dashboard (bottom page with graphs) doesn't report any hash and funny thing is the summary on top of the ethermine.org, it correctly sum up total mhs for all my rigs. I suspect its the way etherminer is coded but then again qtminer.exe works too, but not the dual miner.

Put -esm 1 in your bat 

thanks dominuspro for the tip.....

... but still dont work for me 

[dominuspro]

Does anyone have shares displayed correctly on ethermine.org ?  I mean in the "Shares (Invalid / Valid / %)" column..
Claymore's miner does submit ( and only valids! ) and I am obviously getting paid for them, but they're not displayed like I said (tried both with v1.2 and with v2.0).

yes, i have same issue.

I am still paid but the dashboard (bottom page with graphs) doesn't report any hash and funny thing is the summary on top of the ethermine.org, it correctly sum up total mhs for all my rigs. I suspect its the way etherminer is coded but then again qtminer.exe works too, but not the dual miner.

Put -esm 1 in your bat 

thanks dominuspro for the tip.....

... but still dont work for me 

Mine 390 works without any problem on win7x64, crimson 15.12...
Everything reported properly poolside. It was allready with the first version of the miner.

bat file:

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xxxx.390 -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal xxx.xxx1 -dpsw 1 -esm 1

Code:

ETH: 04/17/16-18:22:29 - New job (target 0x0000000112e0be82) from eu1.ethermine.org:4444
ETH - Total Speed: 31.997 Mh/s, Total Shares: 295, Rejected: 0, Time: 10:26
ETH: GPU0 31.997 Mh/s
 DCR - Total Speed: 479.955 Mh/s, Total Shares: 2143, Rejected: 37
 DCR: GPU0 479.955 Mh/s

[citronick]

Does anyone have shares displayed correctly on ethermine.org ?  I mean in the "Shares (Invalid / Valid / %)" column..
Claymore's miner does submit ( and only valids! ) and I am obviously getting paid for them, but they're not displayed like I said (tried both with v1.2 and with v2.0).

yes, i have same issue.

I am still paid but the dashboard (bottom page with graphs) doesn't report any hash and funny thing is the summary on top of the ethermine.org, it correctly sum up total mhs for all my rigs. I suspect its the way etherminer is coded but then again qtminer.exe works too, but not the dual miner.

Put -esm 1 in your bat 

thanks dominuspro for the tip.....

... but still dont work for me 

Mine 390 works without any problem on win7x64, crimson 15.12...
Everything reported properly poolside. It was allready with the first version of the miner.

bat file:

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xxxx.390 -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal xxx.xxx1 -dpsw 1 -esm 1

Code:

ETH: 04/17/16-18:22:29 - New job (target 0x0000000112e0be82) from eu1.ethermine.org:4444
ETH - Total Speed: 31.997 Mh/s, Total Shares: 295, Rejected: 0, Time: 10:26
ETH: GPU0 31.997 Mh/s
 DCR - Total Speed: 479.955 Mh/s, Total Shares: 2143, Rejected: 37
 DCR: GPU0 479.955 Mh/s

hi dominuspro -- yes, it works!
had to wait for a few more minutes for its to show and visible now.
-ems 1 gave results "qtminer.exe mode" which is great because qtminer is better with stratum unlike get work method  by ethminer.exe

[madmartyk]

Does anyone have shares displayed correctly on ethermine.org ?  I mean in the "Shares (Invalid / Valid / %)" column..
Claymore's miner does submit ( and only valids! ) and I am obviously getting paid for them, but they're not displayed like I said (tried both with v1.2 and with v2.0).

Mine are not showing up as well, but I swear it was working with 1.2 (maybe but I was drinking at the time)...

[revelacaogr]

ethermine.org here shows 64 valid and 0 invalid....
the same in claymores miner.....

[alevlaslo]

Claymore

Dear friend! There is a good and profitable algorithm qubit, which little load cards like the ETH, what do you think about this? DCR very heavy card, so it gives only 20% of the single mode and the qubit will probably fall slightly in tandem with ETH, and possibly will not fall at all!

DGB-Qubit(DGB) is a good profit coin now http://www.whattomine.com

x13 and x15 little load cards so but not so profitable

Monero most little load but small profit

[citronick]

ethermine.org here shows 64 valid and 0 invalid....
the same in claymores miner.....

same here - all good, zero invalids.... hard to believe... 
even during using qtminer.exe, i do get a few invalids but not much.

I wish i can say the same for DCR, my pool have 8-9% average invalids/rejects.

[revelacaogr]

dcr pool.mn

2-2.5% invalid only
i have now 730 valid--18 invalid

[revelacaogr]

miner config:

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe  -epool  eu1.ethermine.org:4444 -ewal 0x......  -epsw x -ethi 16 -esm 0  -dpool stratum+tcp://dcr.pool.mn:4800    -dwal ....... -dpsw ......... -dcri 20 -mode 0
pause

[omnik]

Claymore - any plans to add ETH clones support, such as soil, expanse etc?

[AlexBoos]

Claymore - any plans to add ETH clones support, such as soil, expanse etc?

These coins are automatically supported. As in conventional miners.

[omnik]

Claymore - any plans to add ETH clones support, such as soil, expanse etc?

These coins are automatically supported. As in conventional miners.

It doesn't work... probably due to dev fee.

[Claymore]

Claymore - any plans to add ETH clones support, such as soil, expanse etc?

Devfee is not a problem. It is something related to tech part.
As far as I understand, you cannot mine these coins with ethminer from Ethereum, you have to use ethminer from Expanse, am I correct?

[Claymore]

I'm working on next update:
- Further improvements related to DAG files, for example, even better stability when new epoch is coming, perhaps you already noticed that miner did not crash at new epoch #45 as official miner usually does.
- Performance improvements for weak cards and Fury.
- Checking shares on CPU and warn if GPU calculates them incorrectly (usually due to overclocking).

[omnik]

Claymore - any plans to add ETH clones support, such as soil, expanse etc?

Devfee is not a problem. It is something related to tech part.
As far as I understand, you cannot mine these coins with ethminer from Ethereum, you have to use ethminer from Expanse, am I correct?

You can mine any Dagger-Hashimoto coin with any ethminer (original or Genoil)...
It doesn't work, tried both Dwarf and suprnova... just disconnects and trying to reconnect.

Pls try it out: http://dwarfpool.com/exp

[Eliovp]

I'm working on next update:
- Further improvements related to DAG files, for example, even better stability when new epoch is coming, perhaps you already noticed that miner did not crash at new epoch #45 as official miner usually does.
- Performance improvements for weak cards and Fury.
- Checking shares on CPU and warn if GPU calculates them incorrectly (usually due to overclocking).

I'm curious