cryptoc19
Newbie
Offline
Activity: 15
Merit: 0
|
|
April 17, 2016, 03:48:27 PM |
|
Do you have the same problem using other miners (not Claymore's) ?
|
|
|
|
Trimegistus
Legendary
Offline
Activity: 1564
Merit: 1027
|
|
April 17, 2016, 03:50:02 PM |
|
I'm getting better results with this miner, compared to Genoil's or the Homestead versions.
My only problem is loosing 5% ETH shares when in dual mining mode.
But that might be related with the fact that I'm using a mix of 270x with 7950.
@Claymore, any progress optimizing your code for the 270x?
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
April 17, 2016, 03:50:59 PM |
|
Do you have the same problem using other miners (not Claymore's) ?
etherminer, qtminer all works ok. But the Claymore v2 doesn't work. However, on ETH and DCR mining, i am getting very good results on ethermine.org with no invalids. DCR however gives me 8-9% invalids -- but this is probably due to zpool stratum which I mine DCR, because other DCR pools, reports lower invalids % I have replaced qtminer.exe on all my rigs with Claymore's DM v2, even at dual mining mode I am getting very stable performance from my 390s.
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
dominuspro
|
|
April 17, 2016, 04:04:05 PM |
|
Does anyone have shares displayed correctly on ethermine.org ? I mean in the "Shares (Invalid / Valid / %)" column.. Claymore's miner does submit ( and only valids! ) and I am obviously getting paid for them, but they're not displayed like I said (tried both with v1.2 and with v2.0). yes, i have same issue. I am still paid but the dashboard (bottom page with graphs) doesn't report any hash and funny thing is the summary on top of the ethermine.org, it correctly sum up total mhs for all my rigs. I suspect its the way etherminer is coded but then again qtminer.exe works too, but not the dual miner. Put -esm 1 in your bat
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
April 17, 2016, 04:14:50 PM |
|
Does anyone have shares displayed correctly on ethermine.org ? I mean in the "Shares (Invalid / Valid / %)" column.. Claymore's miner does submit ( and only valids! ) and I am obviously getting paid for them, but they're not displayed like I said (tried both with v1.2 and with v2.0). yes, i have same issue. I am still paid but the dashboard (bottom page with graphs) doesn't report any hash and funny thing is the summary on top of the ethermine.org, it correctly sum up total mhs for all my rigs. I suspect its the way etherminer is coded but then again qtminer.exe works too, but not the dual miner. Put -esm 1 in your bat thanks dominuspro for the tip..... ... but still dont work for me
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
dominuspro
|
|
April 17, 2016, 04:29:16 PM |
|
Does anyone have shares displayed correctly on ethermine.org ? I mean in the "Shares (Invalid / Valid / %)" column.. Claymore's miner does submit ( and only valids! ) and I am obviously getting paid for them, but they're not displayed like I said (tried both with v1.2 and with v2.0). yes, i have same issue. I am still paid but the dashboard (bottom page with graphs) doesn't report any hash and funny thing is the summary on top of the ethermine.org, it correctly sum up total mhs for all my rigs. I suspect its the way etherminer is coded but then again qtminer.exe works too, but not the dual miner. Put -esm 1 in your bat thanks dominuspro for the tip..... ... but still dont work for me Mine 390 works without any problem on win7x64, crimson 15.12... Everything reported properly poolside. It was allready with the first version of the miner. bat file: setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xxxx.390 -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal xxx.xxx1 -dpsw 1 -esm 1 ETH: 04/17/16-18:22:29 - New job (target 0x0000000112e0be82) from eu1.ethermine.org:4444 ETH - Total Speed: 31.997 Mh/s, Total Shares: 295, Rejected: 0, Time: 10:26 ETH: GPU0 31.997 Mh/s DCR - Total Speed: 479.955 Mh/s, Total Shares: 2143, Rejected: 37 DCR: GPU0 479.955 Mh/s
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
April 17, 2016, 04:39:04 PM |
|
Does anyone have shares displayed correctly on ethermine.org ? I mean in the "Shares (Invalid / Valid / %)" column.. Claymore's miner does submit ( and only valids! ) and I am obviously getting paid for them, but they're not displayed like I said (tried both with v1.2 and with v2.0). yes, i have same issue. I am still paid but the dashboard (bottom page with graphs) doesn't report any hash and funny thing is the summary on top of the ethermine.org, it correctly sum up total mhs for all my rigs. I suspect its the way etherminer is coded but then again qtminer.exe works too, but not the dual miner. Put -esm 1 in your bat thanks dominuspro for the tip..... ... but still dont work for me Mine 390 works without any problem on win7x64, crimson 15.12... Everything reported properly poolside. It was allready with the first version of the miner. bat file: setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xxxx.390 -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal xxx.xxx1 -dpsw 1 -esm 1 ETH: 04/17/16-18:22:29 - New job (target 0x0000000112e0be82) from eu1.ethermine.org:4444 ETH - Total Speed: 31.997 Mh/s, Total Shares: 295, Rejected: 0, Time: 10:26 ETH: GPU0 31.997 Mh/s DCR - Total Speed: 479.955 Mh/s, Total Shares: 2143, Rejected: 37 DCR: GPU0 479.955 Mh/s hi dominuspro -- yes, it works! had to wait for a few more minutes for its to show and visible now. -ems 1 gave results "qtminer.exe mode" which is great because qtminer is better with stratum unlike get work method by ethminer.exe
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
madmartyk
Legendary
Offline
Activity: 2702
Merit: 1030
Yes I am a pirate, 300 years too late!
|
|
April 17, 2016, 05:07:57 PM |
|
Does anyone have shares displayed correctly on ethermine.org ? I mean in the "Shares (Invalid / Valid / %)" column.. Claymore's miner does submit ( and only valids! ) and I am obviously getting paid for them, but they're not displayed like I said (tried both with v1.2 and with v2.0). Mine are not showing up as well, but I swear it was working with 1.2 (maybe but I was drinking at the time)...
|
|
|
|
revelacaogr
Legendary
Offline
Activity: 1316
Merit: 1021
2009 Alea iacta est
|
|
April 17, 2016, 06:48:45 PM |
|
ethermine.org here shows 64 valid and 0 invalid.... the same in claymores miner.....
|
|
|
|
alevlaslo
|
|
April 17, 2016, 06:55:03 PM |
|
ClaymoreDear friend! There is a good and profitable algorithm qubit, which little load cards like the ETH, what do you think about this? DCR very heavy card, so it gives only 20% of the single mode and the qubit will probably fall slightly in tandem with ETH, and possibly will not fall at all! DGB-Qubit(DGB) is a good profit coin now http://www.whattomine.comx13 and x15 little load cards so but not so profitable Monero most little load but small profit
|
Sale the first NFT of the first foto
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
April 17, 2016, 06:56:01 PM |
|
ethermine.org here shows 64 valid and 0 invalid.... the same in claymores miner.....
same here - all good, zero invalids.... hard to believe... even during using qtminer.exe, i do get a few invalids but not much. I wish i can say the same for DCR, my pool have 8-9% average invalids/rejects.
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
revelacaogr
Legendary
Offline
Activity: 1316
Merit: 1021
2009 Alea iacta est
|
|
April 17, 2016, 07:14:00 PM |
|
dcr pool.mn
2-2.5% invalid only i have now 730 valid--18 invalid
|
|
|
|
revelacaogr
Legendary
Offline
Activity: 1316
Merit: 1021
2009 Alea iacta est
|
|
April 17, 2016, 07:30:18 PM |
|
miner config:
GPU_FORCE_64BIT_PTR 0 GPU_MAX_HEAP_SIZE 100 GPU_USE_SYNC_OBJECTS 1 GPU_MAX_ALLOC_PERCENT 100 GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x...... -epsw x -ethi 16 -esm 0 -dpool stratum+tcp://dcr.pool.mn:4800 -dwal ....... -dpsw ......... -dcri 20 -mode 0 pause
|
|
|
|
omnik
|
|
April 17, 2016, 07:49:03 PM |
|
Claymore - any plans to add ETH clones support, such as soil, expanse etc?
|
|
|
|
AlexBoos
Newbie
Offline
Activity: 41
Merit: 0
|
|
April 17, 2016, 08:38:43 PM |
|
Claymore - any plans to add ETH clones support, such as soil, expanse etc?
These coins are automatically supported. As in conventional miners.
|
|
|
|
omnik
|
|
April 17, 2016, 08:40:24 PM |
|
Claymore - any plans to add ETH clones support, such as soil, expanse etc?
These coins are automatically supported. As in conventional miners. It doesn't work... probably due to dev fee.
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
April 17, 2016, 08:57:47 PM |
|
Claymore - any plans to add ETH clones support, such as soil, expanse etc?
Devfee is not a problem. It is something related to tech part. As far as I understand, you cannot mine these coins with ethminer from Ethereum, you have to use ethminer from Expanse, am I correct?
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
April 17, 2016, 09:01:03 PM |
|
I'm working on next update: - Further improvements related to DAG files, for example, even better stability when new epoch is coming, perhaps you already noticed that miner did not crash at new epoch #45 as official miner usually does. - Performance improvements for weak cards and Fury. - Checking shares on CPU and warn if GPU calculates them incorrectly (usually due to overclocking).
|
|
|
|
omnik
|
|
April 17, 2016, 09:17:02 PM |
|
Claymore - any plans to add ETH clones support, such as soil, expanse etc?
Devfee is not a problem. It is something related to tech part. As far as I understand, you cannot mine these coins with ethminer from Ethereum, you have to use ethminer from Expanse, am I correct? You can mine any Dagger-Hashimoto coin with any ethminer (original or Genoil)... It doesn't work, tried both Dwarf and suprnova... just disconnects and trying to reconnect. Pls try it out: http://dwarfpool.com/exp
|
|
|
|
Eliovp
Legendary
Offline
Activity: 1050
Merit: 1294
Huh?
|
|
April 17, 2016, 09:18:29 PM |
|
I'm working on next update: - Further improvements related to DAG files, for example, even better stability when new epoch is coming, perhaps you already noticed that miner did not crash at new epoch #45 as official miner usually does. - Performance improvements for weak cards and Fury. - Checking shares on CPU and warn if GPU calculates them incorrectly (usually due to overclocking).
I'm curious
|
|
|
|
|