Fiyasko
Legendary
Offline
Activity: 1428
Merit: 1001
Okey Dokey Lokey
|
|
November 21, 2012, 01:01:49 PM Last edit: November 21, 2012, 06:53:57 PM by JackRabiit |
|
Yay the 2.9.4 works great with stratum and eclipse!
Hashpower has LP again!
Everything is working as expected.
That's what I like to hear. Do be careful though. That poison known as GBT may strike with unexpected bugs if one of your backup pools uses GBT. Best current compromise is to use as many stratum pools as possible with their direct addresses and add --fix-protocol in case one of your backup pool uses GBT. Bottom line: I really regret even implementing GBT for cgminer, as it was a lot of work, introduced a new set of bugs, and has earned me zero donations despite a lot of work. I'm seriously considering just disabling or even backing out GBT support.Gosh guys, Do we Not have a donation address for ckolivas? When there was the change from 2.7->2.8 and we got that Totally Uneccesary "Best Share" stat, I'd of set my donation to 1% for two days. I really think that CGminer should have a Prompt of "Could you please help the developer by enabling .001% hashrate donation? There are no side affects" Seriously, Back when CGminer prompted for "donation set to 0%, Please consider atleast 0.00x% :"(" it made me want to donate, Im sure that if Ckolivas Gets SOMETHING for doing all this work, Then he'll continue the work. What would you all do if CGminer just Stopped being updated? For awhile we would all be just fine, But imagine if it was discontinued Before stratum, Or even before LongPolling Just donate!
|
|
|
|
Luke-Jr
Legendary
Offline
Activity: 2576
Merit: 1186
|
|
November 21, 2012, 01:07:54 PM |
|
Do be careful though. That poison known as GBT may strike with unexpected bugs if one of your backup pools uses GBT. You mean the poison known as "conman implemented his own GBT from scratch and it's full of bugs because he never read the spec and made a lot of poor assumptions that don't hold true in practice".
|
|
|
|
Joshwaa
|
|
November 21, 2012, 02:39:15 PM |
|
Too early for FUD!
I swear I would donate a lot to see Con and Luke in a UFC match.. I would say Kano could referee but that might be unfair. Lol
|
|
|
|
dietwice
Newbie
Offline
Activity: 58
Merit: 0
|
|
November 21, 2012, 02:47:37 PM |
|
Imho it would be great to have a command line switch just to disable GBT and stop worrying about which one of backup pools had accidentally enabled GBT support.
|
|
|
|
Krak
|
|
November 21, 2012, 05:18:58 PM |
|
Gosh guys, Do we Not have a donation address for ckolivas? When there was the change from 2.7->2.8 and we got that Totally Uneccesary "Best Share" stat, I set my donation to 1% for two days. I really think that CGminer should have a Prompt of "Could you please help the developer by enabling .001% hashrate donation? There are no side affects"
Seriously, Back when CGminer prompted for "donation set to 0%, Please consider atleast 0.00x% :"(" it made me want to donate, Im sure that if Ckolivas Gets SOMETHING for doing all this work, Then he'll continue the work.
I'm pretty sure the donation feature was removed before 2.7.
|
BTC: 1KrakenLFEFg33A4f6xpwgv3UUoxrLPuGn
|
|
|
P_Shep
Legendary
Offline
Activity: 1795
Merit: 1208
This is not OK.
|
|
November 21, 2012, 06:45:37 PM |
|
So the the back-up pools getwork every 60s, while the active pool gets work when it needs to. Why doesn't the back-up pools get work when the active pool gets it?
For my stratum pools, I find the active with, say 9 getworks, the backup has 50.
|
|
|
|
Fiyasko
Legendary
Offline
Activity: 1428
Merit: 1001
Okey Dokey Lokey
|
|
November 21, 2012, 06:55:20 PM |
|
-
I'm pretty sure the donation feature was removed before 2.7. Yeah it was, I meant to say "I would've" and it looked weird so i removed it, Changed it to "i'dve" and "i'd've" both looked wrong, And i forgot to finish it
|
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4242
Merit: 1644
Ruu \o/
|
|
November 21, 2012, 10:11:24 PM |
|
Actually I somewhat wish people would donate more for stratum support and no one donated for GBT support and I could disable that steaming pile of shit protocol. I might just disable it by default and add a command line to enable it instead. This is the reason I implemented stratum support first, to demonstrate how much better it actually was and show my support for the superior pool mining protocol, and I was hoping gbt would just go away.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
crazyates
Legendary
Offline
Activity: 952
Merit: 1000
|
|
November 21, 2012, 10:15:20 PM |
|
Actually I somewhat wish people would donate more for stratum support and no one donated for GBT support and I could disable that steaming pile of shit protocol. I might just disable it by default and add a command line to enable it instead. This is the reason I implemented stratum support first, to demonstrate how much better it actually was and show my support for the superior pool mining protocol, and I was hoping gbt would just go away.
So by including support for GBT, you're making it an option for potential miners, but secretly hoping it goes away. Sounds like you've already made up your mind.
|
|
|
|
twmz
|
|
November 21, 2012, 11:16:14 PM |
|
Actually I somewhat wish people would donate more for stratum support and no one donated for GBT support and I could disable that steaming pile of shit protocol. I might just disable it by default and add a command line to enable it instead. This is the reason I implemented stratum support first, to demonstrate how much better it actually was and show my support for the superior pool mining protocol, and I was hoping gbt would just go away.
Post two bitcoin addresses, one for donations from those who want to show support for stratum, and the other for showing support of GBT. That way people can "vote" with their wallets.
|
Was I helpful? 1 TwmzX1wBxNF2qtAJRhdKmi2WyLZ5VHRs WoT, GPGBitrated user: ewal.
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4242
Merit: 1644
Ruu \o/
|
|
November 21, 2012, 11:29:07 PM |
|
Actually I somewhat wish people would donate more for stratum support and no one donated for GBT support and I could disable that steaming pile of shit protocol. I might just disable it by default and add a command line to enable it instead. This is the reason I implemented stratum support first, to demonstrate how much better it actually was and show my support for the superior pool mining protocol, and I was hoping gbt would just go away.
Post two bitcoin addresses, one for donations from those who want to show support for stratum, and the other for showing support of GBT. That way people can "vote" with their wallets. I already made about 50BTC from a few generous poolops showing their support for me implementing stratum, since it's clearly benefiting the pools even more than it is the miners. That's some battle GBT has ahead since it's currently at zero... Anyway if someone does donate for GBT in the interim, please tell me that's what you're donating for, since I can't set up a wallet address right now.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
PatMan
|
|
November 21, 2012, 11:36:46 PM |
|
Hi guys, Sorry if this sounds a bit noobish, but I can't find the answer anywhere. My problem is this: I can run cgminer on my rig (headless) no problem, but I get a "devices don't match/multiple monitors/ run gpu map" error when I start it, and I'm unable to change/apply any settings apart from intensity, even if I put them in my config file it won't load them. Also, by the time I start to read the above error message it's gone! so I never get a chance to read it entirely. This is also true when I start cgminer with the -n flag, it briefly flashes the result on screen before disappearing, not giving me a chance to read the result. If I add the "pause" command it scrolls past the results and asks me to press any key to continue. I've tried using the logfile.txt command but it's blank. Is there any way to keep the cgminer window open long enough for me to read it? It's strange, as the very first time I set cgminer up it worked a treat, but after a reboot it's never been the same. I'm quite new to this game, and very new to cgminer, so any help/advice would be greatly appreciated. Specs & stuff: WIN7 64bit 11.12 drivers 2.1 SDK (I'm told these are the best to use?) HD5970 in top slot HD5870 in second & third slot Config: , "intensity" : "7,7,7,7", "vectors" : "2,2,2,2", "auto-fan" : true, "worksize" : "128,128,128,128", "kernel" : "phatk,phatk,phatk,phatk", "lookup-gap" : "0,0,0,0", "thread-concurrency" : "0,0,0,0", "shaders" : "0,0,0,0", "gpu-engine" : "940,940,820,820", "gpu-fan" : "50-100,50-100,50-100,50-100", "gpu-memclock" : "300,300,300,300", "gpu-memdiff" : "0,0,0,0", "gpu-powertune" : "0,0,0,0", "gpu-vddc" : "0.000,0.000,0.000,0.000", "temp-cutoff" : "95,95,95,95", "temp-overheat" : "90,90,90,90", "temp-target" : "85,85,85,85", "api-port" : "4028", "expiry" : "120", "gpu-dyninterval" : "7", "gpu-platform" : "1", "gpu-threads" : "2", "log" : "5", "queue" : "1", "scan-time" : "60", "temp-hysteresis" : "3", "shares" : "0", "kernel-path" : "/usr/local/bin" } Thanks in advance someone.......
|
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4242
Merit: 1644
Ruu \o/
|
|
November 22, 2012, 12:10:33 AM |
|
Is there any way to keep the cgminer window open long enough for me to read it? It's strange, as the very first time I set cgminer up it worked a treat, but after a reboot it's never been the same. I'm quite new to this game, and very new to cgminer, so any help/advice would be greatly appreciated.
Start cgminer from a dos prompt instead of a bat file or clicking on it and the dos prompt wont disappear... Also add -T and it will just scroll the text output instead of formatting it.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4242
Merit: 1644
Ruu \o/
|
|
November 22, 2012, 12:54:02 AM |
|
Done. Reading symbols from /home/user/hdd/bitcoin/cgminer-2.9.4-x86_64-built/cgminer...done. [New LWP 27740] [New LWP 23114] [New LWP 23132] [New LWP 23099] [New LWP 22458] [New LWP 23138] [New LWP 22756] [New LWP 23135] [New LWP 24650] [New LWP 23134] [New LWP 23133] [New LWP 23113] [New LWP 27743] [New LWP 22757] [New LWP 25467] [New LWP 23100] [New LWP 26811]
warning: Can't read pathname for load map: Input/output error. [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Core was generated by `./cgminer -c ../cgminer.conf --gpu-engine 500-600 --temp-cutoff 85 --gpu-fan 45'. Program terminated with signal 6, Aborted. #0 0x00007fa5177ac425 in __GI_raise (sig=<optimized out>) at ../nptl/sysdeps/unix/sysv/linux/raise.c:64 64 ../nptl/sysdeps/unix/sysv/linux/raise.c: No such file or directory. (gdb) bt #0 0x00007fa5177ac425 in __GI_raise (sig=<optimized out>) at ../nptl/sysdeps/unix/sysv/linux/raise.c:64 #1 0x00007fa5177afb8b in __GI_abort () at abort.c:91 #2 0x00007fa5177ea39e in __libc_message (do_abort=2, fmt=0x7fa5178f1e3f "*** %s ***: %s terminated\n") at ../sysdeps/unix/sysv/linux/libc_fatal.c:201 #3 0x00007fa517880807 in __GI___fortify_fail (msg=0x7fa5178f1dd6 "buffer overflow detected") at fortify_fail.c:32 #4 0x00007fa51787f700 in __GI___chk_fail () at chk_fail.c:29 #5 0x00007fa51787eb69 in _IO_str_chk_overflow (fp=<optimized out>, c=<optimized out>) at vsprintf_chk.c:35 #6 0x00007fa5177f213d in _IO_default_xsputn (f=0x7fa4f4ff8ba0, data=<optimized out>, n=2906) at genops.c:485 #7 0x00007fa5177c0f82 in _IO_vfprintf_internal (s=<optimized out>, format=<optimized out>, ap=<optimized out>) at vfprintf.c:1630 #8 0x00007fa51787ec04 in ___vsprintf_chk (s=0x7fa4cc0020e9 "0100000001", '0' <repeats 64 times>, "ffffffff4c03d92e030f00456c69676975730050aa1ca20488fabe6d6d5ac523f49912c85158966f09972f3689830ac7371984a4d0e71335bb878f56b90800"..., flags=1, slen=512, format=0x448ff2 "%s", args=0x7fa4f4ff8cc8) at vsprintf_chk.c:86 #9 0x00007fa51787eb4d in ___sprintf_chk (s=<optimized out>, flags=<optimized out>, slen=<optimized out>, format=<optimized out>) at sprintf_chk.c:33 #10 0x000000000040fc75 in sprintf (__fmt=0x448ff2 "%s", __s=0x7fa4cc0020e9 "0100000001", '0' <repeats 64 times>, "ffffffff4c03d92e030f00456c69676975730050aa1ca20488fabe6d6d5ac523f49912c85158966f09972f3689830ac7371984a4d0e71335bb878f56b90800"...) at /usr/include/x86_64-linux-gnu/bits/stdio2.h:34 #11 gen_gbt_work (pool=0x10ec310, work=0x7fa4cc001e40) at cgminer.c:1487 #12 0x0000000000414e0b in get_work_thread (userdata=0x7fa50000a770) at cgminer.c:3066 #13 0x00007fa5188a2e9a in start_thread (arg=0x7fa4f4ff9700) at pthread_create.c:308 #14 0x00007fa517869cbd in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:112 #15 0x0000000000000000 in ?? () Thanks muchly. Most helpful it will be.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
SAC
|
|
November 22, 2012, 12:54:36 AM |
|
the dos prompt wont disappear...
And for those of you young enough to not remember that abomination they now call it a cmd window.
|
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4242
Merit: 1644
Ruu \o/
|
|
November 22, 2012, 12:57:28 AM |
|
the dos prompt wont disappear...
And for those of you young enough not to remember that abomination they now call it a cmd window. Heh, sorry, it's been 13 years since I used windows in any capacity...
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
jborkl
|
|
November 22, 2012, 01:01:06 AM |
|
Is it possible to implement/integrate stratum direct for solo mining. Or write/rewrite the proxy to launch with cgminer?
I know how to borrow stratum or longpoll, but I do not prefer to.
Windows
Wondering if it is possible. Thank you
|
|
|
|
SAC
|
|
November 22, 2012, 01:05:01 AM |
|
the dos prompt wont disappear...
And for those of you young enough not to remember that abomination they now call it a cmd window. Heh, sorry, it's been 13 years since I used windows in any capacity... No problem it has been almost exactly the same here (whenever RH 5.2 came out 98-99??) since I went linux but you have definitely taken those linux skills to a level I have not got too yet..
|
|
|
|
PatMan
|
|
November 22, 2012, 03:44:48 AM |
|
Is there any way to keep the cgminer window open long enough for me to read it? It's strange, as the very first time I set cgminer up it worked a treat, but after a reboot it's never been the same. I'm quite new to this game, and very new to cgminer, so any help/advice would be greatly appreciated.
Start cgminer from a dos prompt instead of a bat file or clicking on it and the dos prompt wont disappear... Also add -T and it will just scroll the text output instead of formatting it. Thanks for the reply ckolivas, Yup, tried that too - still disappears too quickly to read it....even with the -T flag. Been a few years since I used DOS, but I'm sure this is right: START Users\<User>\Desktop\Mining\cgminer-2.9.4-win32\cgminer.exe The miner starts, then I get a very fast error message and it closes...... I'm doing something stupidly wrong here.........
|
|
|
|
twmz
|
|
November 22, 2012, 03:58:26 AM |
|
Yup, tried that too - still disappears too quickly to read it....even with the -T flag. Been a few years since I used DOS, but I'm sure this is right: START Users\<User>\Desktop\Mining\cgminer-2.9.4-win32\cgminer.exe The miner starts, then I get a very fast error message and it closes...... I'm doing something stupidly wrong here......... Run: cmd A black window with a prompt will pop up and not go away. At that prompt, run cgminer.
|
Was I helpful? 1 TwmzX1wBxNF2qtAJRhdKmi2WyLZ5VHRs WoT, GPGBitrated user: ewal.
|
|
|
|