shoesman
Newbie
Offline
Activity: 54
Merit: 0
|
|
April 16, 2014, 11:13:42 AM Last edit: April 16, 2014, 12:47:03 PM by shoesman |
|
ok now im quite confused this is what i got in both of my bitcoin.conf folders , yes oddly enough i have 2 bitcoin.conf files in seperate folders is this normal ?, first one is the bitcoin folder in appdata rpcuser=generated_by_armory rpcpassword=8-09f8g-09sdf8g0-9df0-sg9stgergregfds proxy=127.0.0.1:9051 listen=1 port=8331 and this is what i got in my bitcoin.conf file in the armory folder in the appdata folder rpcuser=generated_by_armory rpcpassword=4325342645364536756ujfghnfgdgrwgxfjghfkhfj proxy=127.0.0.1:9051 listen=1 port=8331 armory shows offline and bitcoin core wont sync now , but if i set it as so in the bitcoin folders bitcoin.conf rpcuser=generated_by_armory rpcpassword=CKADQejZwtxnQDw8NGRKT6CnkDexAVABX7NoGVc1GmWD listen=1 then bitcoin core works again and armory goes online , wtf , what do i do , ive even tested this by running armory first and then having bitcoin core connect, well suffice to say , armory shows offline and my firewall doesnt register any connections from armory until bitcoin core connects , then armory shows as connected and i see connections from armory.exe in my firewall , then i exit out bitcoin core and armory shows disconnected , so there you have it not sure what to make of this thou after hearing listen=1 by its own is a bad idea apparently, btw the suggestion of using whonix gateway isnt a good idea because i use obfuscated bridges aka obfs3 protocol , which regular tor doesnt provide which whonix gateway uses and so your isp can see you using tor , not a good thing depending on where you live, what we need is simple support to have armory use bitcoin cores connection for all the connections armory has to make , be it blockchain , updates , and so on , youd think with armorys aim for security this should be default, again please help me out to be able to route all of armorys connections through bitcoin core , thanks heres the armory log: 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:919 - C++ block utilities loaded successfully 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1009 - 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1010 - 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1011 - 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1012 - ************************************************************ 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1013 - Invoked: C:\Program Files (x86)\Armory\ArmoryQt.exe 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1014 - ************************************************************ 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1015 - Loading Armory Engine: 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1016 - Armory Version : 0.91 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1017 - PyBtcWallet Version : 1.35 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1018 - Detected Operating system: Windows 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1019 - OS Variant : 7-6.1.7601-SP1-Multiprocessor Free 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1020 - User home-directory : C:\Users\bob\AppData\Roaming 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1021 - Satoshi BTC directory : C:\Users\bob\AppData\Roaming\Bitcoin\ 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1022 - Armory home dir : C:\Users\bob\AppData\Roaming\Armory\ 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1023 - Detected System Specs : 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1024 - Total Available RAM : 15.99 GB 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1025 - CPU ID string : Intel64 Family 5 Model 24 Stepping 2, GenuineIntel 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1026 - Number of CPU cores : 6 cores 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1027 - System is 64-bit : False 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1028 - Preferred Encoding : cp1252 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1029 - 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1030 - Network Name: Main Network 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1031 - Satoshi Port: 8333 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1032 - Named options/arguments to armoryengine.py: 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - maxOpenFiles : 0 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - nettimeout : 2 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - rescan : False 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - leveldbDir : DEFAULT 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - ignoreAllZC : False 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - port : None 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - interport : 8223 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - coverageOutputDir: None 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - rebuild : False 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - datadir : DEFAULT 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - offline : False 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - noWalletCheck : False 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - satoshiPort : DEFAULT 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - netlog : False 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - keypool : 100 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - coverageInclude : None 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - forceOnline : False 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - skipAnnounceCheck: False 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - redownload : False 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - disableTorrent : False 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - testAnnounceCode: False 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - mtdebug : False 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - skipVerCheck : False 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - settingsPath : C:\Users\bob\AppData\Roaming\Armory\ArmorySettings.txt 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - verbosity : None 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - doDebug : False 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - testnet : False 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - rpcport : DEFAULT 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - satoshiHome : DEFAULT 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - satoshiRpcport : DEFAULT 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - logDisable : False 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1034 - logFile : C:\Users\bob\AppData\Roaming\Armory\ArmoryQt.exe.log.txt 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1035 - Other arguments: 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1038 - ************************************************************ 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:1386 - C++ block utilities loaded successfully 2014-04-16 12:46 (INFO) -- BDM.pyc:1420 - Using the asynchronous/multi-threaded BlockDataManager. 2014-04-16 12:46 (INFO) -- BDM.pyc:1421 - Blockchain operations will happen in the background. 2014-04-16 12:46 (INFO) -- BDM.pyc:1422 - Devs: check TheBDM.getBDMState() before asking for data. 2014-04-16 12:46 (INFO) -- BDM.pyc:1423 - Registering addresses during rescans will queue them for 2014-04-16 12:46 (INFO) -- BDM.pyc:1424 - inclusion after the current scan is completed. 2014-04-16 12:46 (INFO) -- ArmoryUtils.pyc:3007 - Using settings file: C:\Users\bob\AppData\Roaming\Armory\ArmorySettings.txt 2014-04-16 12:46 (INFO) -- announcefetch.pyc:83 - Reading files in fetcher directory: 2014-04-16 12:46 (INFO) -- announcefetch.pyc:92 - announce : 52b6e5624ed25b90d2d2a783ab87635b048aa8b7cb14b21a958ad052faee8691 2014-04-16 12:46 (INFO) -- announcefetch.pyc:92 - bootstrap : 0c68367a6126ed922c90fd06f6b3dc2217248b595adf5c6a1832cdeb4a3ae0b7 2014-04-16 12:46 (INFO) -- announcefetch.pyc:92 - changelog : 00e39ea889395a7148dea87274ee60e484c97c67905b65c67782290dad945639 2014-04-16 12:46 (INFO) -- announcefetch.pyc:92 - downloads : b553c42962f36961f7ac56b85bdd8d6656a16a95c2ce0bc9d60670165825f786 2014-04-16 12:46 (INFO) -- announcefetch.pyc:92 - notify : 011ee87ce2b50a18a06ca4a05f95c5a8f7dc9d55cced2a4654c609eea2795f4c 2014-04-16 12:46 (INFO) -- announcefetch.pyc:249 - Fetching: https://bitcoinarmory.com/announce.txt?osvar=7&os=win&ver=0.91&id=e7d396f6 2014-04-16 12:46 (INFO) -- ArmoryQt.py:2244 - loadWalletsAndSettings 2014-04-16 12:46 (INFO) -- ArmoryQt.py:2302 - Loading wallets... 2014-04-16 12:46 (ERROR) -- announcefetch.pyc:261 - Specified URL was inaccessible 2014-04-16 12:46 (ERROR) -- announcefetch.pyc:262 - Tried: https://bitcoinarmory.com/announce.txt?osvar=7&os=win&ver=0.91&id=e7d396f6 2014-04-16 12:46 (INFO) -- announcefetch.pyc:249 - Fetching: https://s3.amazonaws.com/bitcoinarmory-media/announce.txt?ver=0.91 2014-04-16 12:46 (ERROR) -- announcefetch.pyc:261 - Specified URL was inaccessible 2014-04-16 12:46 (ERROR) -- announcefetch.pyc:262 - Tried: https://s3.amazonaws.com/bitcoinarmory-media/announce.txt?ver=0.91 2014-04-16 12:46 (WARNING) -- announcefetch.pyc:275 - Error fetching announce digest 2014-04-16 12:46 (INFO) -- ArmoryQt.py:2351 - Number of wallets read in: 1 2014-04-16 12:46 (INFO) -- ArmoryQt.py:2356 - Wallet (xcvbcvb): "dgfhdfgjhkgjhjhgk" (Encrypted) 2014-04-16 12:46 (INFO) -- ArmoryQt.py:1786 - Setting up networking... 2014-04-16 12:46 (ERROR) -- ArmoryQt.py:1829 - Error checking for internet connection Traceback (most recent call last): File "ArmoryQt.py", line 1827, in setupNetworking File "urllib2.pyc", line 127, in urlopen File "urllib2.pyc", line 404, in open File "urllib2.pyc", line 422, in _open File "urllib2.pyc", line 382, in _call_chain File "urllib2.pyc", line 1214, in http_open File "urllib2.pyc", line 1184, in do_open URLError: <urlopen error [Errno 11004] getaddrinfo failed> 2014-04-16 12:46 (ERROR) -- ArmoryQt.py:1830 - Run --skip-online-check if you think this is an error 2014-04-16 12:46 (INFO) -- ArmoryQt.py:1838 - Internet connection is Available: False 2014-04-16 12:46 (INFO) -- ArmoryQt.py:1839 - Bitcoin-Qt/bitcoind is Available: 0 2014-04-16 12:46 (INFO) -- ArmoryQt.py:1840 - The first blk*.dat was Available: True 2014-04-16 12:46 (INFO) -- ArmoryQt.py:1841 - Online mode currently possible: False 2014-04-16 12:46 (INFO) -- ArmoryQt.py:2028 - loadBlockchainIfNecessary 2014-04-16 12:46 (INFO) -- ArmoryQt.py:2074 - Setting netmode: 0 2014-04-16 12:46 (INFO) -- BDM.pyc:431 - Setting online mode: False (wait=False) 2014-04-16 12:46 (INFO) -- ArmoryQt.py:1099 - setupUriRegistration 2014-04-16 12:46 (INFO) -- ArmoryQt.py:1167 - Armory already registered for current user. Done! 2014-04-16 12:46 (INFO) -- ArmoryQt.py:585 - Usermode: Expert 2014-04-16 12:46 (INFO) -- ArmoryQt.py:1366 - Changing usermode: 2014-04-16 12:46 (INFO) -- ArmoryQt.py:1367 - From: Expert 2014-04-16 12:46 (INFO) -- ArmoryQt.py:1375 - To: Expert 2014-04-16 12:46 (INFO) -- ArmoryQt.py:4914 - Switching Armory state text to Mgmt:User, State:OfflineNoSatoshiNoInternet 2014-04-16 12:46 (INFO) -- ArmoryQt.py:4856 - Switching Armory functional mode to "Offline" 2014-04-16 12:46 (INFO) -- ArmoryQt.py:698 - MinimizeOnOpen is True 2014-04-16 13:07 (INFO) -- ArmoryQt.py:6150 - BDM is safe for clean shutdown 2014-04-16 13:07 (INFO) -- BDM.pyc:1346 - Shutdown Requested 2014-04-16 13:07 (ERROR) -- BDM.pyc:1141 - Resetting BDM and all wallets 2014-04-16 13:07 (INFO) -- BDM.pyc:1393 - BDM is shutdown. 2014-04-16 13:07 (INFO) -- SDM.pyc:636 - Called stopBitcoind 2014-04-16 13:07 (INFO) -- SDM.pyc:638 - ...but bitcoind is not running, to be able to stop 2014-04-16 13:07 (INFO) -- ArmoryQt.py:6162 - Attempting to close the main window! 2014-04-16 13:07 (INFO) -- ArmoryQt.py:6435 - Resetting BlockDataMgr, freeing memory 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:919 - C++ block utilities loaded successfully 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1009 - 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1010 - 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1011 - 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1012 - ************************************************************ 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1013 - Invoked: C:\Program Files (x86)\Armory\ArmoryQt.exe 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1014 - ************************************************************ 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1015 - Loading Armory Engine: 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1016 - Armory Version : 0.91 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1017 - PyBtcWallet Version : 1.35 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1018 - Detected Operating system: Windows 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1019 - OS Variant : 7-6.1.7601-SP1-Multiprocessor Free 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1020 - User home-directory : C:\Users\bob\AppData\Roaming 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1021 - Satoshi BTC directory : C:\Users\bob\AppData\Roaming\Bitcoin\ 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1022 - Armory home dir : C:\Users\bob\AppData\Roaming\Armory\ 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1023 - Detected System Specs : 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1024 - Total Available RAM : 15.99 GB 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1025 - CPU ID string : Intel64 Family 5 Model 24 Stepping 2, GenuineIntel 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1026 - Number of CPU cores : 6 cores 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1027 - System is 64-bit : False 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1028 - Preferred Encoding : cp1252 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1029 - 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1030 - Network Name: Main Network 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1031 - Satoshi Port: 8333 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1032 - Named options/arguments to armoryengine.py: 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - maxOpenFiles : 0 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - nettimeout : 2 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - rescan : False 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - leveldbDir : DEFAULT 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - ignoreAllZC : False 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - port : None 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - interport : 8223 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - coverageOutputDir: None 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - rebuild : False 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - datadir : DEFAULT 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - offline : False 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - noWalletCheck : False 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - satoshiPort : DEFAULT 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - netlog : False 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - keypool : 100 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - coverageInclude : None 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - forceOnline : False 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - skipAnnounceCheck: False 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - redownload : False 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - disableTorrent : False 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - testAnnounceCode: False 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - mtdebug : False 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - skipVerCheck : False 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - settingsPath : C:\Users\bob\AppData\Roaming\Armory\ArmorySettings.txt 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - verbosity : None 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - doDebug : False 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - testnet : False 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - rpcport : DEFAULT 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - satoshiHome : DEFAULT 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - satoshiRpcport : DEFAULT 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - logDisable : False 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1034 - logFile : C:\Users\bob\AppData\Roaming\Armory\ArmoryQt.exe.log.txt 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1035 - Other arguments: 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1038 - ************************************************************ 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:1386 - C++ block utilities loaded successfully 2014-04-16 13:07 (INFO) -- BDM.pyc:1420 - Using the asynchronous/multi-threaded BlockDataManager. 2014-04-16 13:07 (INFO) -- BDM.pyc:1421 - Blockchain operations will happen in the background. 2014-04-16 13:07 (INFO) -- BDM.pyc:1422 - Devs: check TheBDM.getBDMState() before asking for data. 2014-04-16 13:07 (INFO) -- BDM.pyc:1423 - Registering addresses during rescans will queue them for 2014-04-16 13:07 (INFO) -- BDM.pyc:1424 - inclusion after the current scan is completed. 2014-04-16 13:07 (INFO) -- ArmoryUtils.pyc:3007 - Using settings file: C:\Users\bob\AppData\Roaming\Armory\ArmorySettings.txt 2014-04-16 13:07 (INFO) -- announcefetch.pyc:83 - Reading files in fetcher directory: 2014-04-16 13:07 (INFO) -- announcefetch.pyc:92 - announce : 52b6e5624ed25b90d2d2a783ab87635b048aa8b7cb14b21a958ad052faee8691 2014-04-16 13:07 (INFO) -- announcefetch.pyc:92 - bootstrap : 0c68367a6126ed922c90fd06f6b3dc2217248b595adf5c6a1832cdeb4a3ae0b7 2014-04-16 13:07 (INFO) -- announcefetch.pyc:92 - changelog : 00e39ea889395a7148dea87274ee60e484c97c67905b65c67782290dad945639 2014-04-16 13:07 (INFO) -- announcefetch.pyc:92 - downloads : b553c42962f36961f7ac56b85bdd8d6656a16a95c2ce0bc9d60670165825f786 2014-04-16 13:07 (INFO) -- announcefetch.pyc:92 - notify : 011ee87ce2b50a18a06ca4a05f95c5a8f7dc9d55cced2a4654c609eea2795f4c 2014-04-16 13:07 (INFO) -- announcefetch.pyc:249 - Fetching: https://bitcoinarmory.com/announce.txt?osvar=7&os=win&ver=0.91&id=e7d396f6 2014-04-16 13:07 (INFO) -- ArmoryQt.py:2244 - loadWalletsAndSettings 2014-04-16 13:07 (INFO) -- ArmoryQt.py:2302 - Loading wallets... 2014-04-16 13:07 (INFO) -- ArmoryQt.py:2351 - Number of wallets read in: 1 2014-04-16 13:07 (INFO) -- ArmoryQt.py:2356 - Wallet (asdfasdf): "sdfasdfasdfasdf" (Encrypted) 2014-04-16 13:07 (INFO) -- ArmoryQt.py:1786 - Setting up networking... 2014-04-16 13:07 (INFO) -- ArmoryQt.py:1838 - Internet connection is Available: True 2014-04-16 13:07 (INFO) -- ArmoryQt.py:1839 - Bitcoin-Qt/bitcoind is Available: 8333 2014-04-16 13:07 (INFO) -- ArmoryQt.py:1840 - The first blk*.dat was Available: True 2014-04-16 13:07 (INFO) -- ArmoryQt.py:1841 - Online mode currently possible: True 2014-04-16 13:07 (INFO) -- ArmoryQt.py:2028 - loadBlockchainIfNecessary 2014-04-16 13:07 (INFO) -- ArmoryQt.py:2074 - Setting netmode: 1 2014-04-16 13:07 (INFO) -- BDM.pyc:431 - Setting online mode: True (wait=False) 2014-04-16 13:07 (INFO) -- BDM.pyc:1358 - Go online requested 2014-04-16 13:07 (ERROR) -- announcefetch.pyc:261 - Specified URL was inaccessible 2014-04-16 13:07 (ERROR) -- announcefetch.pyc:262 - Tried: https://bitcoinarmory.com/announce.txt?osvar=7&os=win&ver=0.91&id=e7d396f6 2014-04-16 13:07 (INFO) -- announcefetch.pyc:249 - Fetching: https://s3.amazonaws.com/bitcoinarmory-media/announce.txt?ver=0.91 2014-04-16 13:07 (INFO) -- ArmoryQt.py:1099 - setupUriRegistration 2014-04-16 13:07 (INFO) -- ArmoryQt.py:1167 - Armory already registered for current user. Done! 2014-04-16 13:07 (INFO) -- ArmoryQt.py:585 - Usermode: Expert 2014-04-16 13:07 (INFO) -- ArmoryQt.py:1366 - Changing usermode: 2014-04-16 13:07 (INFO) -- ArmoryQt.py:1367 - From: Expert 2014-04-16 13:07 (INFO) -- ArmoryQt.py:1375 - To: Expert 2014-04-16 13:07 (INFO) -- ArmoryQt.py:5610 - Dashboard switched to "Scanning" mode 2014-04-16 13:07 (INFO) -- ArmoryQt.py:4914 - Switching Armory state text to Mgmt:User, State:ScanWithWallets 2014-04-16 13:07 (INFO) -- ArmoryQt.py:4914 - Switching Armory state text to Mgmt:Auto, State:NewUserInfo 2014-04-16 13:07 (INFO) -- ArmoryQt.py:4856 - Switching Armory functional mode to "Scanning" 2014-04-16 13:07 (INFO) -- ArmoryQt.py:698 - MinimizeOnOpen is True 2014-04-16 13:07 (INFO) -- ArmoryQt.py:6334 - Another Armory instance just tried to open. 2014-04-16 13:07 (INFO) -- Networking.pyc:63 - Connection initiated. Start handshake 2014-04-16 13:07 (INFO) -- ArmoryQt.py:5610 - Dashboard switched to "Scanning" mode 2014-04-16 13:07 (INFO) -- ArmoryQt.py:4914 - Switching Armory state text to Mgmt:User, State:ScanWithWallets 2014-04-16 13:07 (INFO) -- ArmoryQt.py:4914 - Switching Armory state text to Mgmt:Auto, State:NewUserInfo 2014-04-16 13:07 (INFO) -- ArmoryQt.py:4856 - Switching Armory functional mode to "Scanning" 2014-04-16 13:07 (INFO) -- Networking.pyc:152 - Received version message from peer: 2014-04-16 13:07 (INFO) -- Networking.pyc:153 - Version: 70002 2014-04-16 13:07 (INFO) -- Networking.pyc:154 - SubVersion: /Satoshi:0.9.1/ 2014-04-16 13:07 (INFO) -- Networking.pyc:155 - TimeStamp: 1397646436 2014-04-16 13:07 (INFO) -- Networking.pyc:156 - StartHeight: 296082 2014-04-16 13:07 (INFO) -- Networking.pyc:348 - Handshake finished, connection open! 2014-04-16 13:07 (ERROR) -- announcefetch.pyc:162 - Loop was busy for more than one second 2014-04-16 13:08 (INFO) -- ArmoryQt.py:6147 - BDM state is scanning -- force shutdown BDM 2014-04-16 13:08 (INFO) -- SDM.pyc:636 - Called stopBitcoind 2014-04-16 13:08 (INFO) -- SDM.pyc:638 - ...but bitcoind is not running, to be able to stop 2014-04-16 13:08 (INFO) -- ArmoryQt.py:6162 - Attempting to close the main window! 2014-04-16 13:08 (INFO) -- ArmoryQt.py:6435 - Resetting BlockDataMgr, freeing memory 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:919 - C++ block utilities loaded successfully 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1009 - 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1010 - 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1011 - 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1012 - ************************************************************ 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1013 - Invoked: C:\Program Files (x86)\Armory\ArmoryQt.exe 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1014 - ************************************************************ 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1015 - Loading Armory Engine: 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1016 - Armory Version : 0.91 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1017 - PyBtcWallet Version : 1.35 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1018 - Detected Operating system: Windows 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1019 - OS Variant : 7-6.1.7601-SP1-Multiprocessor Free 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1020 - User home-directory : C:\Users\bob\AppData\Roaming 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1021 - Satoshi BTC directory : C:\Users\bob\AppData\Roaming\Bitcoin\ 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1022 - Armory home dir : C:\Users\bob\AppData\Roaming\Armory\ 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1023 - Detected System Specs : 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1024 - Total Available RAM : 15.99 GB 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1025 - CPU ID string : Intel64 Family 5 Model 24 Stepping 2, GenuineIntel 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1026 - Number of CPU cores : 6 cores 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1027 - System is 64-bit : False 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1028 - Preferred Encoding : cp1252 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1029 - 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1030 - Network Name: Main Network 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1031 - Satoshi Port: 8333 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1032 - Named options/arguments to armoryengine.py: 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - maxOpenFiles : 0 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - nettimeout : 2 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - rescan : False 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - leveldbDir : DEFAULT 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - ignoreAllZC : False 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - port : None 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - interport : 8223 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - coverageOutputDir: None 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - rebuild : False 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - datadir : DEFAULT 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - offline : False 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - noWalletCheck : False 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - satoshiPort : DEFAULT 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - netlog : False 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - keypool : 100 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - coverageInclude : None 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - forceOnline : False 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - skipAnnounceCheck: False 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - redownload : False 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - disableTorrent : False 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - testAnnounceCode: False 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - mtdebug : False 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - skipVerCheck : False 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - settingsPath : C:\Users\bob\AppData\Roaming\Armory\ArmorySettings.txt 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - verbosity : None 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - doDebug : False 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - testnet : False 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - rpcport : DEFAULT 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - satoshiHome : DEFAULT 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - satoshiRpcport : DEFAULT 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - logDisable : False 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1034 - logFile : C:\Users\bob\AppData\Roaming\Armory\ArmoryQt.exe.log.txt 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1035 - Other arguments: 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1038 - ************************************************************ 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:1386 - C++ block utilities loaded successfully 2014-04-16 13:29 (INFO) -- BDM.pyc:1420 - Using the asynchronous/multi-threaded BlockDataManager. 2014-04-16 13:29 (INFO) -- BDM.pyc:1421 - Blockchain operations will happen in the background. 2014-04-16 13:29 (INFO) -- BDM.pyc:1422 - Devs: check TheBDM.getBDMState() before asking for data. 2014-04-16 13:29 (INFO) -- BDM.pyc:1423 - Registering addresses during rescans will queue them for 2014-04-16 13:29 (INFO) -- BDM.pyc:1424 - inclusion after the current scan is completed. 2014-04-16 13:29 (INFO) -- ArmoryUtils.pyc:3007 - Using settings file: C:\Users\bob\AppData\Roaming\Armory\ArmorySettings.txt 2014-04-16 13:29 (INFO) -- announcefetch.pyc:83 - Reading files in fetcher directory: 2014-04-16 13:29 (INFO) -- announcefetch.pyc:92 - announce : 52b6e5624ed25b90d2d2a783ab87635b048aa8b7cb14b21a958ad052faee8691 2014-04-16 13:29 (INFO) -- announcefetch.pyc:92 - bootstrap : 0c68367a6126ed922c90fd06f6b3dc2217248b595adf5c6a1832cdeb4a3ae0b7 2014-04-16 13:29 (INFO) -- announcefetch.pyc:92 - changelog : 00e39ea889395a7148dea87274ee60e484c97c67905b65c67782290dad945639 2014-04-16 13:29 (INFO) -- announcefetch.pyc:92 - downloads : b553c42962f36961f7ac56b85bdd8d6656a16a95c2ce0bc9d60670165825f786 2014-04-16 13:29 (INFO) -- announcefetch.pyc:92 - notify : 011ee87ce2b50a18a06ca4a05f95c5a8f7dc9d55cced2a4654c609eea2795f4c 2014-04-16 13:29 (INFO) -- announcefetch.pyc:249 - Fetching: https://bitcoinarmory.com/announce.txt?osvar=7&os=win&ver=0.91&id=e7d396f6 2014-04-16 13:29 (INFO) -- ArmoryQt.py:2244 - loadWalletsAndSettings 2014-04-16 13:29 (INFO) -- ArmoryQt.py:2302 - Loading wallets... 2014-04-16 13:29 (INFO) -- ArmoryQt.py:2351 - Number of wallets read in: 1 2014-04-16 13:29 (INFO) -- ArmoryQt.py:2356 - Wallet (sdfgdsfg): "nvbmghnfgdhsdfg" (Encrypted) 2014-04-16 13:29 (INFO) -- ArmoryQt.py:1786 - Setting up networking... 2014-04-16 13:29 (ERROR) -- announcefetch.pyc:261 - Specified URL was inaccessible 2014-04-16 13:29 (ERROR) -- announcefetch.pyc:262 - Tried: https://bitcoinarmory.com/announce.txt?osvar=7&os=win&ver=0.91&id=e7d396f6 2014-04-16 13:29 (INFO) -- announcefetch.pyc:249 - Fetching: https://s3.amazonaws.com/bitcoinarmory-media/announce.txt?ver=0.91 2014-04-16 13:29 (INFO) -- ArmoryQt.py:1838 - Internet connection is Available: True 2014-04-16 13:29 (INFO) -- ArmoryQt.py:1839 - Bitcoin-Qt/bitcoind is Available: 8333 2014-04-16 13:29 (INFO) -- ArmoryQt.py:1840 - The first blk*.dat was Available: True 2014-04-16 13:29 (INFO) -- ArmoryQt.py:1841 - Online mode currently possible: True 2014-04-16 13:29 (INFO) -- ArmoryQt.py:2028 - loadBlockchainIfNecessary 2014-04-16 13:29 (INFO) -- ArmoryQt.py:2074 - Setting netmode: 1 2014-04-16 13:29 (INFO) -- BDM.pyc:431 - Setting online mode: True (wait=False) 2014-04-16 13:29 (INFO) -- BDM.pyc:1358 - Go online requested 2014-04-16 13:29 (INFO) -- ArmoryQt.py:1099 - setupUriRegistration 2014-04-16 13:29 (INFO) -- ArmoryQt.py:1167 - Armory already registered for current user. Done! 2014-04-16 13:29 (INFO) -- ArmoryQt.py:585 - Usermode: Expert 2014-04-16 13:29 (INFO) -- ArmoryQt.py:1366 - Changing usermode: 2014-04-16 13:29 (INFO) -- ArmoryQt.py:1367 - From: Expert 2014-04-16 13:29 (INFO) -- ArmoryQt.py:1375 - To: Expert 2014-04-16 13:29 (INFO) -- ArmoryQt.py:5610 - Dashboard switched to "Scanning" mode 2014-04-16 13:29 (INFO) -- ArmoryQt.py:4914 - Switching Armory state text to Mgmt:User, State:ScanWithWallets 2014-04-16 13:29 (INFO) -- ArmoryQt.py:4914 - Switching Armory state text to Mgmt:Auto, State:NewUserInfo 2014-04-16 13:29 (INFO) -- ArmoryQt.py:4856 - Switching Armory functional mode to "Scanning" 2014-04-16 13:29 (INFO) -- ArmoryQt.py:698 - MinimizeOnOpen is True 2014-04-16 13:29 (INFO) -- Networking.pyc:63 - Connection initiated. Start handshake 2014-04-16 13:29 (INFO) -- ArmoryQt.py:5610 - Dashboard switched to "Scanning" mode 2014-04-16 13:29 (INFO) -- ArmoryQt.py:4914 - Switching Armory state text to Mgmt:User, State:ScanWithWallets 2014-04-16 13:29 (INFO) -- ArmoryQt.py:4914 - Switching Armory state text to Mgmt:Auto, State:NewUserInfo 2014-04-16 13:29 (INFO) -- ArmoryQt.py:4856 - Switching Armory functional mode to "Scanning" 2014-04-16 13:29 (INFO) -- Networking.pyc:152 - Received version message from peer: 2014-04-16 13:29 (INFO) -- Networking.pyc:153 - Version: 70002 2014-04-16 13:29 (INFO) -- Networking.pyc:154 - SubVersion: /Satoshi:0.9.1/ 2014-04-16 13:29 (INFO) -- Networking.pyc:155 - TimeStamp: 1397647769 2014-04-16 13:29 (INFO) -- Networking.pyc:156 - StartHeight: 296143 2014-04-16 13:29 (INFO) -- Networking.pyc:348 - Handshake finished, connection open! 2014-04-16 13:31 (ERROR) -- Networking.pyc:357 - ***Connection to Satoshi client LOST! Attempting to reconnect... 2014-04-16 13:31 (INFO) -- ArmoryQt.py:5610 - Dashboard switched to "Scanning" mode 2014-04-16 13:31 (INFO) -- ArmoryQt.py:4914 - Switching Armory state text to Mgmt:User, State:ScanWithWallets 2014-04-16 13:31 (INFO) -- ArmoryQt.py:4914 - Switching Armory state text to Mgmt:Auto, State:NewUserInfo 2014-04-16 13:31 (INFO) -- ArmoryQt.py:4856 - Switching Armory functional mode to "Scanning" 2014-04-16 13:31 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 0.0 2014-04-16 13:31 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 0.0 2014-04-16 13:32 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 0.1 2014-04-16 13:32 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 0.1 2014-04-16 13:32 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 0.2 2014-04-16 13:32 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 0.2 2014-04-16 13:32 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 0.3 2014-04-16 13:32 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 0.5 2014-04-16 13:32 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 0.6 2014-04-16 13:32 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 0.8 2014-04-16 13:32 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 0.8 2014-04-16 13:33 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 0.9 2014-04-16 13:33 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 1.1 2014-04-16 13:33 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 1.2 2014-04-16 13:33 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 1.3 2014-04-16 13:33 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 1.5 2014-04-16 13:34 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 1.5 2014-04-16 13:34 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 1.7 2014-04-16 13:34 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 1.7 2014-04-16 13:34 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 1.8 2014-04-16 13:34 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 1.9 2014-04-16 13:34 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 2.0 2014-04-16 13:34 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 2.1 2014-04-16 13:34 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 2.1 2014-04-16 13:34 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 2.1 2014-04-16 13:34 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 2.2 2014-04-16 13:35 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 2.3 2014-04-16 13:35 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 2.3 2014-04-16 13:35 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 2.4 2014-04-16 13:35 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 2.5 2014-04-16 13:35 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 2.6 2014-04-16 13:35 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 2.6 2014-04-16 13:35 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 2.8 2014-04-16 13:35 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 2.8 2014-04-16 13:36 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 2.8 2014-04-16 13:36 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 2.9 2014-04-16 13:36 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 3.0 2014-04-16 13:36 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 3.1 2014-04-16 13:36 (INFO) -- ArmoryQt.py:2074 - Setting netmode: 1 2014-04-16 13:36 (INFO) -- Networking.pyc:63 - Connection initiated. Start handshake 2014-04-16 13:36 (INFO) -- ArmoryQt.py:5610 - Dashboard switched to "Scanning" mode 2014-04-16 13:36 (INFO) -- ArmoryQt.py:4914 - Switching Armory state text to Mgmt:User, State:ScanWithWallets 2014-04-16 13:36 (INFO) -- ArmoryQt.py:4914 - Switching Armory state text to Mgmt:Auto, State:NewUserInfo 2014-04-16 13:36 (INFO) -- ArmoryQt.py:4856 - Switching Armory functional mode to "Scanning" 2014-04-16 13:36 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 3.2 2014-04-16 13:36 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 3.2 2014-04-16 13:36 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 3.3 2014-04-16 13:37 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 3.4 2014-04-16 13:37 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 3.4 2014-04-16 13:37 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 3.5 2014-04-16 13:37 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 3.6 2014-04-16 13:37 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 3.6 2014-04-16 13:37 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 3.6 2014-04-16 13:37 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 3.7 2014-04-16 13:37 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 3.8 2014-04-16 13:38 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 3.8 2014-04-16 13:38 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 3.8 2014-04-16 13:38 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 3.9 2014-04-16 13:38 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 4.0 2014-04-16 13:38 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 4.0 2014-04-16 13:38 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 4.1 2014-04-16 13:39 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 4.2 2014-04-16 13:39 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 4.2 2014-04-16 13:39 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 4.3 2014-04-16 13:39 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 4.3 2014-04-16 13:39 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 4.3 2014-04-16 13:39 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 4.4 2014-04-16 13:39 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 4.5 2014-04-16 13:40 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 4.5 2014-04-16 13:40 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 4.6 2014-04-16 13:40 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 4.7 2014-04-16 13:40 (INFO) -- Networking.pyc:152 - Received version message from peer: 2014-04-16 13:40 (INFO) -- Networking.pyc:153 - Version: 70002 2014-04-16 13:40 (INFO) -- Networking.pyc:154 - SubVersion: /Satoshi:0.9.1/ 2014-04-16 13:40 (INFO) -- Networking.pyc:155 - TimeStamp: 1397648420 2014-04-16 13:40 (INFO) -- Networking.pyc:156 - StartHeight: 296143 2014-04-16 13:40 (INFO) -- Networking.pyc:348 - Handshake finished, connection open! 2014-04-16 13:40 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 4.7 2014-04-16 13:40 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 4.8 2014-04-16 13:40 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 4.8 2014-04-16 13:40 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 4.9 2014-04-16 13:40 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 5.0 2014-04-16 13:40 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 5.1 2014-04-16 13:40 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 5.1 2014-04-16 13:41 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 5.1 2014-04-16 13:41 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 5.2 2014-04-16 13:41 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 5.2 2014-04-16 13:41 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 5.3 2014-04-16 13:41 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 5.3 2014-04-16 13:41 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 5.4 2014-04-16 13:41 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 5.5 2014-04-16 13:41 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 5.5 2014-04-16 13:41 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 5.5 2014-04-16 13:41 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 5.6 2014-04-16 13:42 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 5.7 2014-04-16 13:42 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 5.8 2014-04-16 13:42 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 5.8 2014-04-16 13:42 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 5.9 2014-04-16 13:42 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 5.9 2014-04-16 13:42 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 6.0 2014-04-16 13:42 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 6.0 2014-04-16 13:42 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 6.1 2014-04-16 13:43 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 6.2 2014-04-16 13:43 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 6.2 2014-04-16 13:43 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 6.3 2014-04-16 13:43 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 6.4 2014-04-16 13:43 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 6.4 2014-04-16 13:43 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 6.5 2014-04-16 13:43 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 6.6 2014-04-16 13:43 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 6.6 2014-04-16 13:43 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 6.6 2014-04-16 13:43 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 6.7 2014-04-16 13:43 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 6.7 2014-04-16 13:44 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 6.8 2014-04-16 13:44 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 6.9 2014-04-16 13:44 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 6.9 2014-04-16 13:44 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 7.0 2014-04-16 13:44 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 7.0 2014-04-16 13:44 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 7.1 2014-04-16 13:44 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 7.2 2014-04-16 13:45 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 7.2 2014-04-16 13:45 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 7.2 2014-04-16 13:45 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 7.3 2014-04-16 13:45 (INFO) -- Networking.pyc:63 - Connection initiated. Start handshake 2014-04-16 13:45 (INFO) -- ArmoryQt.py:5610 - Dashboard switched to "Scanning" mode 2014-04-16 13:45 (INFO) -- ArmoryQt.py:4914 - Switching Armory state text to Mgmt:User, State:ScanWithWallets 2014-04-16 13:45 (INFO) -- ArmoryQt.py:4914 - Switching Armory state text to Mgmt:Auto, State:NewUserInfo 2014-04-16 13:45 (INFO) -- ArmoryQt.py:4856 - Switching Armory functional mode to "Scanning" 2014-04-16 13:45 (INFO) -- Networking.pyc:152 - Received version message from peer: 2014-04-16 13:45 (INFO) -- Networking.pyc:153 - Version: 70002 2014-04-16 13:45 (INFO) -- Networking.pyc:154 - SubVersion: /Satoshi:0.9.1/ 2014-04-16 13:45 (INFO) -- Networking.pyc:155 - TimeStamp: 1397648714 2014-04-16 13:45 (INFO) -- Networking.pyc:156 - StartHeight: 296145 2014-04-16 13:45 (INFO) -- Networking.pyc:348 - Handshake finished, connection open! 2014-04-16 13:45 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 7.4 2014-04-16 13:45 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 7.4 2014-04-16 13:45 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 7.4 2014-04-16 13:45 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 7.5 2014-04-16 13:45 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 7.5 2014-04-16 13:46 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 7.6 2014-04-16 13:46 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 7.6 2014-04-16 13:46 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 7.7 2014-04-16 13:46 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 7.7 2014-04-16 13:46 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 7.7 2014-04-16 13:46 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 7.8 2014-04-16 13:46 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 7.8 2014-04-16 13:46 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 7.9 2014-04-16 13:46 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 7.9 2014-04-16 13:46 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 8.0 2014-04-16 13:46 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 8.0 2014-04-16 13:47 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 8.1 2014-04-16 13:47 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 8.1 2014-04-16 13:47 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 8.1 2014-04-16 13:47 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 8.2 2014-04-16 13:47 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 8.2 2014-04-16 13:47 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 8.3 2014-04-16 13:47 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 8.3 2014-04-16 13:47 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 8.4 2014-04-16 13:47 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 8.4 2014-04-16 13:47 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 8.5 2014-04-16 13:47 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 8.5 2014-04-16 13:47 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 8.5 2014-04-16 13:48 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 8.6 2014-04-16 13:48 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 8.6 2014-04-16 13:48 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 8.7 2014-04-16 13:48 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 8.7 2014-04-16 13:48 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 8.7 2014-04-16 13:48 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 8.8 2014-04-16 13:48 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 8.8 2014-04-16 13:48 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 8.9 2014-04-16 13:52 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 8.9 2014-04-16 13:52 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 9.0 2014-04-16 13:52 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 9.1 2014-04-16 13:52 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 9.2 2014-04-16 13:52 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 9.3 2014-04-16 13:53 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 9.4 2014-04-16 13:53 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 9.4 2014-04-16 13:53 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 9.5 2014-04-16 13:53 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 9.6 2014-04-16 13:53 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 9.6 2014-04-16 13:53 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 9.7 2014-04-16 13:53 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 9.8 2014-04-16 13:54 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 9.9 2014-04-16 13:54 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 10.0 2014-04-16 13:54 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 10.1 2014-04-16 13:54 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 10.2 2014-04-16 13:54 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 10.3 2014-04-16 13:54 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 10.4 2014-04-16 13:54 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 10.4 2014-04-16 13:54 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 10.5 2014-04-16 13:54 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 10.5 2014-04-16 13:54 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 10.6 2014-04-16 13:55 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 10.7 2014-04-16 13:55 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 10.8 2014-04-16 13:55 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 10.8 2014-04-16 13:55 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 10.8 2014-04-16 13:55 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 10.9 2014-04-16 13:55 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 10.9 2014-04-16 13:55 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 11.0 2014-04-16 13:55 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 11.1 2014-04-16 13:55 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 11.1 2014-04-16 13:55 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 11.1 2014-04-16 13:55 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 11.2 2014-04-16 13:56 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 11.3 2014-04-16 13:56 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 11.3 2014-04-16 13:56 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 11.4 2014-04-16 13:56 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 11.4 2014-04-16 13:56 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 11.5 2014-04-16 13:56 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 11.5 2014-04-16 13:56 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 11.6 2014-04-16 13:56 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 11.7 2014-04-16 13:57 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 11.7 2014-04-16 13:57 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 11.8 2014-04-16 13:57 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 11.8 2014-04-16 13:57 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 11.9 2014-04-16 13:57 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 11.9 2014-04-16 13:57 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 11.9 2014-04-16 13:57 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 12.0 2014-04-16 13:57 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 12.1 2014-04-16 13:57 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 12.1 2014-04-16 13:57 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 12.1 2014-04-16 13:57 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 12.2 2014-04-16 13:58 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 12.3 2014-04-16 13:58 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 12.3 2014-04-16 13:58 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 12.3 2014-04-16 13:58 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 12.4 2014-04-16 13:58 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 12.4 2014-04-16 13:58 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 12.5 2014-04-16 13:58 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 12.5 2014-04-16 13:58 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 12.6 2014-04-16 13:58 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 12.6 2014-04-16 13:58 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 12.6 2014-04-16 13:58 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 12.7 2014-04-16 13:58 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 12.7 2014-04-16 13:59 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 12.8 2014-04-16 13:59 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 12.8 2014-04-16 13:59 (INFO) -- announcefetch.pyc:249 - Fetching: https://bitcoinarmory.com/announce.txt?ver=0.91 2014-04-16 13:59 (ERROR) -- announcefetch.pyc:261 - Specified URL was inaccessible 2014-04-16 13:59 (ERROR) -- announcefetch.pyc:262 - Tried: https://bitcoinarmory.com/announce.txt?ver=0.91 2014-04-16 13:59 (INFO) -- announcefetch.pyc:249 - Fetching: https://s3.amazonaws.com/bitcoinarmory-media/announce.txt?ver=0.91 2014-04-16 13:59 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 12.8 2014-04-16 13:59 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 12.9 2014-04-16 13:59 (INFO) -- BDM.pyc:384 - Reading blockchain, pct complete: 12.9
|
|
|
|
|
|
|
If you want to be a moderator, report many posts with accuracy. You will be noticed.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
goatpig
Moderator
Legendary
Offline
Activity: 3668
Merit: 1347
Armory Developer
|
|
April 16, 2014, 04:52:04 PM |
|
bitcoin.conf in Armory's datadir? That won't help you. For Armory, create a shortcut, go the to shortcut properties and at the end of the 'target' input box add --satoshi-port=8331, then start from that shortcut. Also block all traffic to that port in firewall settings. because i use obfuscated bridges aka obfs3 protocol , which regular tor doesnt provide which whonix gateway uses and so your isp can see you using tor , not a good thing depending on where you live, what we need is simple support to have armory use bitcoin cores connection I'm pretty sure I said Whonix cause it requires installation, which means persistence, so you can change the settings to fit your use case.
|
|
|
|
shoesman
Newbie
Offline
Activity: 54
Merit: 0
|
|
April 16, 2014, 06:25:43 PM |
|
well ive added --satoshi-port=8331 to the shortcut
still shows offline
ive got these lines in my bitcoin.conf in the bitcoin folder still
proxy=127.0.0.1:9051 listen=1 port=8331
with those lines added bitcoin core wont even connect i have to remove those lines in order to get regular tor proxy connectivity with bitcoin cores network settings, and after retesting listen=1 by itself , well bitcoin core connects outside tor as does armory, no wonder it was working for both ,lols , i dont recommend it , any ideas
|
|
|
|
goatpig
Moderator
Legendary
Offline
Activity: 3668
Merit: 1347
Armory Developer
|
|
April 16, 2014, 06:42:59 PM |
|
well ive added --satoshi-port=8331 to the shortcut
still shows offline
ive got these lines in my bitcoin.conf in the bitcoin folder still
proxy=127.0.0.1:9051 listen=1 port=8331
with those lines added bitcoin core wont even connect i have to remove those lines in order to get regular tor proxy connectivity with bitcoin cores network settings, and after retesting listen=1 by itself , well bitcoin core connects outside tor as does armory, no wonder it was working for both ,lols , i dont recommend it , any ideas
Is your Tor router port 9051? Can you get BitcoinQt to connect through that? What folder is your copy of the blockchain in? It sounds to me like this is the issue. Armory will show offline if one of these 2 requirements isn't met: 1) Connect to a Bitcoin Node on 127.0.0.1 and the port defined by --satoshi-port (8333) by default 2) Be pointed at a folder with a copy of the raw blockchain data, as produced by BitcoinQt. This folder is set by the --satoshi-datadir switch, and defaults to C:\Users\*currentuser*\AppData\Roaming\Bitcoin\blocks in Windows Im curious if your issue isn't 2) rather than 1)
|
|
|
|
etotheipi (OP)
Legendary
Offline
Activity: 1428
Merit: 1093
Core Armory Developer
|
|
April 16, 2014, 06:54:46 PM |
|
Armory will show offline if one of these 2 requirements isn't met:
1) Connect to a Bitcoin Node on 127.0.0.1 and the port defined by --satoshi-port (8333) by default 2) Be pointed at a folder with a copy of the raw blockchain data, as produced by BitcoinQt. This folder is set by the --satoshi-datadir switch, and defaults to C:\Users\*currentuser*\AppData\Roaming\Bitcoin\blocks in Windows
Im curious if your issue isn't 2) rather than 1)
So I'm hardly familiar with Tor at all. But I should remind you that there's a 3rd condition: passing the online-check. You can get around this by adding --skip-online-check to the command-line argument. Most Tor users have required that in order to get online properly.
|
|
|
|
shoesman
Newbie
Offline
Activity: 54
Merit: 0
|
|
April 16, 2014, 08:46:56 PM Last edit: April 16, 2014, 08:58:45 PM by shoesman |
|
1) can you please elaborate i dont quite get what you want me to do on that one since i think ive already done that or have i, as said i have added --satoshi-port (8333) in the target shortcut as youve told me to and proxy ip 127.0.0.1 and port set to 9051 socks v5 in my bitcoin core settings as well in tors browser and yes the recent tor builds use 9051 instead of the old 9050 port , and the bitcoin.conf settings are empty except for
rpcuser=generated_by_armory
rpcpassword=8-09f8g-09sdf8g0-9df0-sg9stgergregfds
since once i put in
proxy=127.0.0.1:9051 listen=1 port=8331
into bitcoin.conf , the bitcoin core client wont connect/sync, and about tor well its pretty easy to see if bitcoin connects over it , you just simply load up bitcoin wait a couple minutes ,check if it syncs if it dont show any connections nor blocksource available then theres no net connectivity , well and then you start up tor and recheck and if it syncs , well then there you have it , same can be done in reverse , shut down tor while bitcoin core is running and see what happens when the connections drop immediately again a clear answer
2) yes as i already said its an default install meaning C:\Users\*currentuser*\AppData\Roaming\Bitcoin\blocks is there
3)and yes theres a checkbox in the armory settings that lets you do this no need to do this in the shortcuts target , disable online check that would be , dont make a difference thou as far as ive been able to tell
|
|
|
|
goatpig
Moderator
Legendary
Offline
Activity: 3668
Merit: 1347
Armory Developer
|
|
April 16, 2014, 10:56:53 PM |
|
--satoshi-port (8333)
I dont even know why I wrote something that stupid. it's --satoshi-port=8331 in the shortcut target, then start Armory from the shortcut. Your problem is 2 fold. Connecting BitcoinQt to Tor and connecting Armory to Tor are in a sense separate yet connected issues. Setting BitcoinQt to connect through Tor will break Armory's connectivity, but getting BitcoinQt to connect through Tor is unrelated to Armory. 2) yes as i already said its an default install meaning C:\Users\*currentuser*\AppData\Roaming\Bitcoin\blocks is there That doesnt mean Armory is necessarily looking at this folder. You may wanna try and force it through the --satoshi-datadir switch. Did you send a log file? At this point I would like to look at one. Sorry if you already sent one and I missed it, kinda slammed lately.
|
|
|
|
Ente
Legendary
Offline
Activity: 2126
Merit: 1001
|
|
April 16, 2014, 11:06:51 PM |
|
Sorry if you already sent one and I missed it, kinda slammed lately.
You guys are doing a great job, with hammering new features all the time, and still having among the best customer support out there. For freeware users, mind you! Hats off to you, Goatpig, Alan, and all of you Armory team! Ente
|
|
|
|
Rampion
Legendary
Offline
Activity: 1148
Merit: 1018
|
|
April 16, 2014, 11:28:30 PM |
|
Armory will show offline if one of these 2 requirements isn't met:
1) Connect to a Bitcoin Node on 127.0.0.1 and the port defined by --satoshi-port (8333) by default 2) Be pointed at a folder with a copy of the raw blockchain data, as produced by BitcoinQt. This folder is set by the --satoshi-datadir switch, and defaults to C:\Users\*currentuser*\AppData\Roaming\Bitcoin\blocks in Windows
Im curious if your issue isn't 2) rather than 1)
So I'm hardly familiar with Tor at all. But I should remind you that there's a 3rd condition: passing the online-check. You can get around this by adding --skip-online-check to the command-line argument. Most Tor users have required that in order to get online properly. Please let me suggest that a clear set-up for Tor users should be tested and recommended, running Bitcoin through Tor should be recommended by default IMO, using Bitcoin without Tor is giving away precious privacy to anyone looking at the traffic. While running only Bitcoin Core through Tor is quite easy and intuitive, running Bitcoin Core+Armory isn't easy nor intuitive at all.
|
|
|
|
etotheipi (OP)
Legendary
Offline
Activity: 1428
Merit: 1093
Core Armory Developer
|
|
April 17, 2014, 01:21:05 AM |
|
Please let me suggest that a clear set-up for Tor users should be tested and recommended, running Bitcoin through Tor should be recommended by default IMO, using Bitcoin without Tor is giving away precious privacy to anyone looking at the traffic. While running only Bitcoin Core through Tor is quite easy and intuitive, running Bitcoin Core+Armory isn't easy nor intuitive at all.
I think these discussions are part of that process for us. I have zilch experience with Tor, and we never claimed that Armory even had Tor in mind when it was created (not that it is necessarily hard to adapt it, but I probably did things that are non-tor-friendly). I think it would be a good idea for us iron this out more rigorously, and tweak one of the next couple releases to be better-adapted for Tor usage. Then we can put up some informational material about it.
|
|
|
|
Deth
|
|
April 17, 2014, 01:27:31 AM |
|
etotheipi, just for your record, it is getting worse building Armory in non Debian-based distros. Quote: Armory developers don't care about Arch user so i made patchs that fix problems. ...while there are 2 patches already to build Armory in Arch (you can scroll down for comments with fixes). Also, why don`t you upload signed archives (or signed hashes of archives) with git snapshots of releases to your website as well as packages, so it will be more building-friendly without that "git tag -v..." thing, which is e.g. hardly inserted in PKGBUILDs of ArchLinux?
|
|
|
|
etotheipi (OP)
Legendary
Offline
Activity: 1428
Merit: 1093
Core Armory Developer
|
|
April 17, 2014, 02:55:01 AM |
|
etotheipi, just for your record, it is getting worse building Armory in non Debian-based distros. Quote: Armory developers don't care about Arch user so i made patchs that fix problems. ...while there are 2 patches already to build Armory in Arch (you can scroll down for comments with fixes). Also, why don`t you upload signed archives (or signed hashes of archives) with git snapshots of releases to your website as well as packages, so it will be more building-friendly without that "git tag -v..." thing, which is e.g. hardly inserted in PKGBUILDs of ArchLinux? The makesfiles for the project have been in flux recently, but I think they finally settled down. One of our guys was able to go in and simplify a bunch of stuff that should make building much easier on all platforms. Admittedly, I'm not familiar with what is needed for each distro, but at least our binaries are universal now (the _CppBlockUtils.so). However, it still requires the target system to have Python2.7. We will be merging the v0.91-beta tag into master soon, but there was a merge conflict and the guy I assigned to do that was on vacation. I should've done it already. Also, I actually put the archives into our build&release scripts, but they are like 100 MB each. I think dpkg-build is bundling the entire git repo into those archives (plus some). Until we figure that out, I decided not to release with it.
|
|
|
|
cypherdoc
Legendary
Offline
Activity: 1764
Merit: 1002
|
|
April 17, 2014, 09:14:12 AM |
|
So I run a vpn by default.
Would tor be of significant help? How much degradation in performance would I see?
|
|
|
|
shoesman
Newbie
Offline
Activity: 54
Merit: 0
|
|
April 17, 2014, 01:25:31 PM Last edit: April 17, 2014, 02:00:36 PM by shoesman |
|
one thing after another , yes tor is abit slower (lols) but its not of that great of importance thats unless you gotta start from the beginning on syncing the blockchain while connected to tor itll take a while prepare for a week or so to get it fully synced from 0 , how would i know ? dont ask xD, but afterwards syncing a couple months isnt gona take longer than a couple hours depending on what node you got , and yes tor would logically help since your bitcoin transactions and whatever else you do over it would be anonymized simply put as long as whatever you buy with those bitcoins isnt tied to your identity meaning you use seperate wallets for seperate occasions , and if your vpn hasnt been paid anonymously which you usually do with cleaned anonymous bought bitcoins well then your vpn isnt anonymous since it has all your billing info through whatever other non anonymous payment method youve chosen wich is stupid at the least to say , and if you did pay with clean bitcoins which something tells me you dont even know what im talking about well that would only be possible if you started with buying your coins over tor over an temp email with cash etc .and then washed them a couple times , and so we reach the beginning of it all, the rabbit hole goes so much deeper thou if youd really want to aim for true anonymity thats abit much for bitcointalk thou and too broad of an subject to be discussed here , if you want an detailed explanation on how tors networking works i recommend to go and visit the official tor forums about tors inner workings , anyhow so ive added this following shortcut to the target of the armory shortcut ive created as such < --satoshi-datadir--satoshi-port (8331) suffice to say still the same .... offline that is and yes youve missed the log ive posted 1 page back , here a fresh one and its fully synced now the blockchain and armorys second blockchain setup not that it really matters , just saying , anyhow here 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:919 - C++ block utilities loaded successfully 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1009 - 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1010 - 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1011 - 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1012 - ************************************************************ 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1013 - Invoked: C:\Program Files (x86)\Armory\ArmoryQt.exe 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1014 - ************************************************************ 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1015 - Loading Armory Engine: 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1016 - Armory Version : 0.91 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1017 - PyBtcWallet Version : 1.35 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1018 - Detected Operating system: Windows 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1019 - OS Variant : 7-6.1.7601-SP1-Multiprocessor Free 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1020 - User home-directory : C:\bob\Anonymous\AppData\Roaming 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1021 - Satoshi BTC directory : C:\bob\Anonymous\AppData\Roaming\Bitcoin\ 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1022 - Armory home dir : C:\bob\Anonymous\AppData\Roaming\Armory\ 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1023 - Detected System Specs : 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1024 - Total Available RAM : 15.99 GB 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1025 - CPU ID string : Intel64 Family 5 Model 24 Stepping 2, GenuineIntel 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1026 - Number of CPU cores : 6 cores 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1027 - System is 64-bit : False 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1028 - Preferred Encoding : cp1252 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1029 - 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1030 - Network Name: Main Network 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1031 - Satoshi Port: 8333 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1032 - Named options/arguments to armoryengine.py: 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - maxOpenFiles : 0 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - nettimeout : 2 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - rescan : False 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - leveldbDir : DEFAULT 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - ignoreAllZC : False 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - port : None 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - interport : 8223 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - coverageOutputDir: None 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - rebuild : False 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - datadir : DEFAULT 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - offline : False 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - noWalletCheck : False 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - satoshiPort : DEFAULT 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - netlog : False 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - keypool : 100 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - coverageInclude : None 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - forceOnline : False 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - skipAnnounceCheck: False 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - redownload : False 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - disableTorrent : False 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - testAnnounceCode: False 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - mtdebug : False 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - skipVerCheck : False 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - settingsPath : C:\Users\bob\AppData\Roaming\Armory\ArmorySettings.txt 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - verbosity : None 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - doDebug : False 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - testnet : False 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - rpcport : DEFAULT 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - satoshiHome : DEFAULT 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - satoshiRpcport : DEFAULT 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - logDisable : False 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1034 - logFile : C:\Users\bob\AppData\Roaming\Armory\ArmoryQt.exe.log.txt 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1035 - Other arguments: 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1038 - ************************************************************ 2014-04-17 13:17 (INFO) -- ArmoryUtils.pyc:1386 - C++ block utilities loaded successfully 2014-04-17 13:17 (INFO) -- BDM.pyc:1420 - Using the asynchronous/multi-threaded BlockDataManager. 2014-04-17 13:17 (INFO) -- BDM.pyc:1421 - Blockchain operations will happen in the background. 2014-04-17 13:17 (INFO) -- BDM.pyc:1422 - Devs: check TheBDM.getBDMState() before asking for data. 2014-04-17 13:17 (INFO) -- BDM.pyc:1423 - Registering addresses during rescans will queue them for 2014-04-17 13:17 (INFO) -- BDM.pyc:1424 - inclusion after the current scan is completed. 2014-04-17 13:18 (INFO) -- ArmoryUtils.pyc:3007 - Using settings file: C:\Users\bob\AppData\Roaming\Armory\ArmorySettings.txt 2014-04-17 13:18 (INFO) -- announcefetch.pyc:83 - Reading files in fetcher directory: 2014-04-17 13:18 (INFO) -- announcefetch.pyc:92 - announce : 52b6e5624ed25b90d2d2a783ab87635b048aa8b7cb14b21a958ad052faee8691 2014-04-17 13:18 (INFO) -- announcefetch.pyc:92 - bootstrap : 0c68367a6126ed922c90fd06f6b3dc2217248b595adf5c6a1832cdeb4a3ae0b7 2014-04-17 13:18 (INFO) -- announcefetch.pyc:92 - changelog : 00e39ea889395a7148dea87274ee60e484c97c67905b65c67782290dad945639 2014-04-17 13:18 (INFO) -- announcefetch.pyc:92 - downloads : b553c42962f36961f7ac56b85bdd8d6656a16a95c2ce0bc9d60670165825f786 2014-04-17 13:18 (INFO) -- announcefetch.pyc:92 - notify : 011ee87ce2b50a18a06ca4a05f95c5a8f7dc9d55cced2a4654c609eea2795f4c 2014-04-17 13:18 (INFO) -- announcefetch.pyc:249 - Fetching: https://bitcoinarmory.com/announce.txt?osvar=7&os=win&ver=0.91&id=e7d396f6 2014-04-17 13:18 (ERROR) -- announcefetch.pyc:261 - Specified URL was inaccessible 2014-04-17 13:18 (ERROR) -- announcefetch.pyc:262 - Tried: https://bitcoinarmory.com/announce.txt?osvar=7&os=win&ver=0.91&id=e7d396f6 2014-04-17 13:18 (INFO) -- announcefetch.pyc:249 - Fetching: https://s3.amazonaws.com/bitcoinarmory-media/announce.txt?ver=0.91 2014-04-17 13:18 (ERROR) -- announcefetch.pyc:261 - Specified URL was inaccessible 2014-04-17 13:18 (ERROR) -- announcefetch.pyc:262 - Tried: https://s3.amazonaws.com/bitcoinarmory-media/announce.txt?ver=0.91 2014-04-17 13:18 (WARNING) -- announcefetch.pyc:275 - Error fetching announce digest 2014-04-17 13:18 (INFO) -- ArmoryQt.py:2244 - loadWalletsAndSettings 2014-04-17 13:18 (INFO) -- ArmoryQt.py:2302 - Loading wallets... 2014-04-17 13:18 (INFO) -- ArmoryQt.py:2351 - Number of wallets read in: 1 2014-04-17 13:18 (INFO) -- ArmoryQt.py:2356 - Wallet (asdfasdfasdf): "khjlhjfdhsfdgcbbbfffsdf" (Encrypted) 2014-04-17 13:18 (INFO) -- ArmoryQt.py:1786 - Setting up networking... 2014-04-17 13:18 (ERROR) -- ArmoryQt.py:1829 - Error checking for internet connection Traceback (most recent call last): File "ArmoryQt.py", line 1827, in setupNetworking File "urllib2.pyc", line 127, in urlopen File "urllib2.pyc", line 404, in open File "urllib2.pyc", line 422, in _open File "urllib2.pyc", line 382, in _call_chain File "urllib2.pyc", line 1214, in http_open File "urllib2.pyc", line 1184, in do_open URLError: <urlopen error [Errno 11004] getaddrinfo failed> 2014-04-17 13:18 (ERROR) -- ArmoryQt.py:1830 - Run --skip-online-check if you think this is an error 2014-04-17 13:18 (INFO) -- ArmoryQt.py:1838 - Internet connection is Available: False 2014-04-17 13:18 (INFO) -- ArmoryQt.py:1839 - Bitcoin-Qt/bitcoind is Available: 0 2014-04-17 13:18 (INFO) -- ArmoryQt.py:1840 - The first blk*.dat was Available: True 2014-04-17 13:18 (INFO) -- ArmoryQt.py:1841 - Online mode currently possible: False 2014-04-17 13:18 (INFO) -- ArmoryQt.py:2028 - loadBlockchainIfNecessary 2014-04-17 13:18 (INFO) -- ArmoryQt.py:2074 - Setting netmode: 0 2014-04-17 13:18 (INFO) -- BDM.pyc:431 - Setting online mode: False (wait=False) 2014-04-17 13:18 (INFO) -- ArmoryQt.py:1099 - setupUriRegistration 2014-04-17 13:18 (INFO) -- ArmoryQt.py:1167 - Armory already registered for current user. Done! 2014-04-17 13:18 (INFO) -- ArmoryQt.py:585 - Usermode: Expert 2014-04-17 13:18 (INFO) -- ArmoryQt.py:1366 - Changing usermode: 2014-04-17 13:18 (INFO) -- ArmoryQt.py:1367 - From: Expert 2014-04-17 13:18 (INFO) -- ArmoryQt.py:1375 - To: Expert 2014-04-17 13:18 (INFO) -- ArmoryQt.py:4914 - Switching Armory state text to Mgmt:User, State:OfflineNoSatoshiNoInternet 2014-04-17 13:18 (INFO) -- ArmoryQt.py:4856 - Switching Armory functional mode to "Offline" 2014-04-17 13:18 (INFO) -- ArmoryQt.py:698 - MinimizeOnOpen is True 2014-04-17 13:48 (INFO) -- announcefetch.pyc:249 - Fetching: https://bitcoinarmory.com/announce.txt?osvar=7&os=win&ver=0.91&id=e7d396f6 2014-04-17 13:48 (ERROR) -- announcefetch.pyc:261 - Specified URL was inaccessible 2014-04-17 13:48 (ERROR) -- announcefetch.pyc:262 - Tried: https://bitcoinarmory.com/announce.txt?osvar=7&os=win&ver=0.91&id=e7d396f6 2014-04-17 13:48 (INFO) -- announcefetch.pyc:249 - Fetching: https://s3.amazonaws.com/bitcoinarmory-media/announce.txt?ver=0.91 2014-04-17 14:18 (INFO) -- announcefetch.pyc:249 - Fetching: https://bitcoinarmory.com/announce.txt?ver=0.91 2014-04-17 14:18 (ERROR) -- announcefetch.pyc:261 - Specified URL was inaccessible 2014-04-17 14:18 (ERROR) -- announcefetch.pyc:262 - Tried: https://bitcoinarmory.com/announce.txt?ver=0.91 2014-04-17 14:18 (INFO) -- announcefetch.pyc:249 - Fetching: https://s3.amazonaws.com/bitcoinarmory-media/announce.txt?ver=0.91 2014-04-17 14:48 (INFO) -- announcefetch.pyc:249 - Fetching: https://bitcoinarmory.com/announce.txt?ver=0.91 2014-04-17 14:48 (ERROR) -- announcefetch.pyc:261 - Specified URL was inaccessible 2014-04-17 14:48 (ERROR) -- announcefetch.pyc:262 - Tried: https://bitcoinarmory.com/announce.txt?ver=0.91 2014-04-17 14:48 (INFO) -- announcefetch.pyc:249 - Fetching: https://s3.amazonaws.com/bitcoinarmory-media/announce.txt?ver=0.91 2014-04-17 15:12 (INFO) -- ArmoryQt.py:6150 - BDM is safe for clean shutdown 2014-04-17 15:12 (INFO) -- BDM.pyc:1346 - Shutdown Requested 2014-04-17 15:12 (ERROR) -- BDM.pyc:1141 - Resetting BDM and all wallets 2014-04-17 15:12 (INFO) -- BDM.pyc:1393 - BDM is shutdown. 2014-04-17 15:12 (INFO) -- SDM.pyc:636 - Called stopBitcoind 2014-04-17 15:12 (INFO) -- SDM.pyc:638 - ...but bitcoind is not running, to be able to stop 2014-04-17 15:12 (INFO) -- ArmoryQt.py:6162 - Attempting to close the main window! 2014-04-17 15:12 (INFO) -- ArmoryQt.py:6435 - Resetting BlockDataMgr, freeing memory 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:919 - C++ block utilities loaded successfully 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1009 - 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1010 - 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1011 - 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1012 - ************************************************************ 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1013 - Invoked: C:\Program Files (x86)\Armory\ArmoryQt.exe 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1014 - ************************************************************ 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1015 - Loading Armory Engine: 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1016 - Armory Version : 0.91 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1017 - PyBtcWallet Version : 1.35 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1018 - Detected Operating system: Windows 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1019 - OS Variant : 7-6.1.7601-SP1-Multiprocessor Free 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1020 - User home-directory : C:\Users\bob\AppData\Roaming 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1021 - Satoshi BTC directory : C:\Users\bob\AppData\Roaming\Bitcoin\ 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1022 - Armory home dir : C:\Users\bob\AppData\Roaming\Armory\ 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1023 - Detected System Specs : 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1024 - Total Available RAM : 15.99 GB 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1025 - CPU ID string : Intel64 Family 5 Model 24 Stepping 2, GenuineIntel 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1026 - Number of CPU cores : 6 cores 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1027 - System is 64-bit : False 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1028 - Preferred Encoding : cp1252 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1029 - 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1030 - Network Name: Main Network 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1031 - Satoshi Port: 8333 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1032 - Named options/arguments to armoryengine.py: 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - maxOpenFiles : 0 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - nettimeout : 2 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - rescan : False 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - leveldbDir : DEFAULT 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - ignoreAllZC : False 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - port : None 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - interport : 8223 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - coverageOutputDir: None 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - rebuild : False 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - datadir : DEFAULT 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - offline : False 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - noWalletCheck : False 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - satoshiPort : DEFAULT 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - netlog : False 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - keypool : 100 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - coverageInclude : None 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - forceOnline : False 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - skipAnnounceCheck: False 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - redownload : False 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - disableTorrent : False 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - testAnnounceCode: False 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - mtdebug : False 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - skipVerCheck : False 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - settingsPath : C:\Users\bob\AppData\Roaming\Armory\ArmorySettings.txt 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - verbosity : None 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - doDebug : False 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - testnet : False 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - rpcport : DEFAULT 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - satoshiHome : DEFAULT 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - satoshiRpcport : DEFAULT 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - logDisable : False 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1034 - logFile : C:\Users\bob\AppData\Roaming\Armory\ArmoryQt.exe.log.txt 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1035 - Other arguments: 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1038 - ************************************************************ 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1386 - C++ block utilities loaded successfully 2014-04-17 15:16 (INFO) -- BDM.pyc:1420 - Using the asynchronous/multi-threaded BlockDataManager. 2014-04-17 15:16 (INFO) -- BDM.pyc:1421 - Blockchain operations will happen in the background. 2014-04-17 15:16 (INFO) -- BDM.pyc:1422 - Devs: check TheBDM.getBDMState() before asking for data. 2014-04-17 15:16 (INFO) -- BDM.pyc:1423 - Registering addresses during rescans will queue them for 2014-04-17 15:16 (INFO) -- BDM.pyc:1424 - inclusion after the current scan is completed. 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:3007 - Using settings file: C:\Users\bob\AppData\Roaming\Armory\ArmorySettings.txt 2014-04-17 15:16 (INFO) -- announcefetch.pyc:83 - Reading files in fetcher directory: 2014-04-17 15:16 (INFO) -- announcefetch.pyc:92 - announce : 52b6e5624ed25b90d2d2a783ab87635b048aa8b7cb14b21a958ad052faee8691 2014-04-17 15:16 (INFO) -- announcefetch.pyc:92 - bootstrap : 0c68367a6126ed922c90fd06f6b3dc2217248b595adf5c6a1832cdeb4a3ae0b7 2014-04-17 15:16 (INFO) -- announcefetch.pyc:92 - changelog : 00e39ea889395a7148dea87274ee60e484c97c67905b65c67782290dad945639 2014-04-17 15:16 (INFO) -- announcefetch.pyc:92 - downloads : b553c42962f36961f7ac56b85bdd8d6656a16a95c2ce0bc9d60670165825f786 2014-04-17 15:16 (INFO) -- announcefetch.pyc:92 - notify : 011ee87ce2b50a18a06ca4a05f95c5a8f7dc9d55cced2a4654c609eea2795f4c 2014-04-17 15:16 (INFO) -- announcefetch.pyc:249 - Fetching: https://bitcoinarmory.com/announce.txt?osvar=7&os=win&ver=0.91&id=e7d396f6 2014-04-17 15:16 (INFO) -- ArmoryQt.py:2244 - loadWalletsAndSettings 2014-04-17 15:16 (INFO) -- ArmoryQt.py:2302 - Loading wallets... 2014-04-17 15:16 (INFO) -- ArmoryQt.py:2351 - Number of wallets read in:1 2014-04-17 15:16 (INFO) -- ArmoryQt.py:2356 - Wallet (sdfgsdfgsdfg): "gsfdgsdfgsdfhsfdh" (Encrypted) 2014-04-17 15:16 (INFO) -- ArmoryQt.py:1786 - Setting up networking... 2014-04-17 15:16 (INFO) -- ArmoryQt.py:1838 - Internet connection is Available: True 2014-04-17 15:16 (INFO) -- ArmoryQt.py:1839 - Bitcoin-Qt/bitcoind is Available: 0 2014-04-17 15:16 (INFO) -- ArmoryQt.py:1840 - The first blk*.dat was Available: True 2014-04-17 15:16 (INFO) -- ArmoryQt.py:1841 - Online mode currently possible: 0 2014-04-17 15:16 (INFO) -- ArmoryQt.py:2028 - loadBlockchainIfNecessary 2014-04-17 15:16 (INFO) -- ArmoryQt.py:2074 - Setting netmode: 0 2014-04-17 15:16 (INFO) -- BDM.pyc:431 - Setting online mode: False (wait=False) 2014-04-17 15:16 (INFO) -- ArmoryQt.py:1099 - setupUriRegistration 2014-04-17 15:16 (INFO) -- ArmoryQt.py:1167 - Armory already registered for current user. Done! 2014-04-17 15:16 (INFO) -- ArmoryQt.py:585 - Usermode: Expert 2014-04-17 15:16 (INFO) -- ArmoryQt.py:1366 - Changing usermode: 2014-04-17 15:16 (INFO) -- ArmoryQt.py:1367 - From: Expert 2014-04-17 15:16 (INFO) -- ArmoryQt.py:1375 - To: Expert 2014-04-17 15:16 (INFO) -- ArmoryQt.py:4914 - Switching Armory state text to Mgmt:User, State:OfflineNoSatoshi 2014-04-17 15:16 (INFO) -- ArmoryQt.py:4856 - Switching Armory functional mode to "Offline" 2014-04-17 15:16 (INFO) -- ArmoryQt.py:698 - MinimizeOnOpen is True 2014-04-17 15:16 (INFO) -- ArmoryQt.py:6334 - Another Armory instance just tried to open. 2014-04-17 15:16 (ERROR) -- announcefetch.pyc:261 - Specified URL was inaccessible 2014-04-17 15:16 (ERROR) -- announcefetch.pyc:262 - Tried: https://bitcoinarmory.com/announce.txt?osvar=7&os=win&ver=0.91&id=e7d396f6 2014-04-17 15:16 (INFO) -- announcefetch.pyc:249 - Fetching: https://s3.amazonaws.com/bitcoinarmory-media/announce.txt?ver=0.91 2014-04-17 15:16 (ERROR) -- announcefetch.pyc:162 - Loop was busy for more than one second 2014-04-17 15:16 (ERROR) -- announcefetch.pyc:162 - Loop was busy for more than one second
the bitcoin.conf is empty as of currently as already said except for this rpcuser=generated_by_armory rpcpassword=8-09f8g-09sdf8g0-9df0-sg9stgergregfds and yes id love for armory again to be able to use for all its net connectivity requirements bitcoin qt aka bitcoin core id really love that ,hope we can get this figured out
|
|
|
|
goatpig
Moderator
Legendary
Offline
Activity: 3668
Merit: 1347
Armory Developer
|
|
April 17, 2014, 06:55:31 PM |
|
you are getting the switches all wrong...
--satoshi-datadir="*pathtomyblockchainfolder*" --satoshi-port=*mycustomport*
no parenthesis, spaces between each commands
|
|
|
|
shoesman
Newbie
Offline
Activity: 54
Merit: 0
|
|
April 17, 2014, 07:52:24 PM |
|
ok ive set the switches as follows
"C:\Program Files (x86)\Armory\ArmoryQt.exe" --satoshi-port=8331 --satoshi-datadir="C:\Users\bob\AppData\Roaming\Bitcoin\blocks"
as well have i tried this one
"C:\Program Files (x86)\Armory\ArmoryQt.exe" --satoshi-port=8331 --satoshi-datadir=C:\Users\bob\AppData\Roaming\Bitcoin\blocks
both make no difference still offline as well has this been tested with online check enabled as well as disabled , nothing
|
|
|
|
etotheipi (OP)
Legendary
Offline
Activity: 1428
Merit: 1093
Core Armory Developer
|
|
April 18, 2014, 12:04:35 AM |
|
ok ive set the switches as follows
"C:\Program Files (x86)\Armory\ArmoryQt.exe" --satoshi-port=8331 --satoshi-datadir="C:\Users\bob\AppData\Roaming\Bitcoin\blocks"
as well have i tried this one
"C:\Program Files (x86)\Armory\ArmoryQt.exe" --satoshi-port=8331 --satoshi-datadir=C:\Users\bob\AppData\Roaming\Bitcoin\blocks
both make no difference still offline as well has this been tested with online check enabled as well as disabled , nothing
--satoshi-datadir should always be pointing at the base Bitcoin directory, i.e. --satoshi-datadir=C:\Users\bob\AppData\Roaming\Bitcoin Also, it would help to know what the dashboard says when it's offline. It almost always tells you why it's offline. With what you're running right now, it probably can't find the blk*.dat files. Once that is fixed, it will tell you the next issue. You posted some logs that look like you intended to be passing these CLI args with it, but it doesn't show any arguments passed. 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1013 - Invoked: C:\Program Files (x86)\Armory\ArmoryQt.exe If the shortcut is setup right it will say: 2014-04-17 15:16 (INFO) -- ArmoryUtils.pyc:1013 - Invoked: C:\Program Files (x86)\Armory\ArmoryQt.exe --satoshi-datadir=C:\Users\bob\AppData\Roaming\Bitcoin --satoshi-port=8331 --skip-online-check
|
|
|
|
po0kie
Newbie
Offline
Activity: 23
Merit: 0
|
|
April 19, 2014, 09:32:17 AM |
|
Hi!
Another strange behaviour on bitcoind. Getting the utxo list, there are utxo items repeated (same index, same txid, same value, for the same address)
Restarting Armory Bitcoind, they are getting fixed. On my process I will group them after asking the json to avoid problems.
Do you know from where it maybe comes from? Is there a method to call to fix it without restarting the service?
Best regards!
|
|
|
|
shoesman
Newbie
Offline
Activity: 54
Merit: 0
|
|
April 19, 2014, 12:59:37 PM |
|
ok after entering the following in the shortcut target --satoshi-datadir=C:\Users\bob\AppData\Roaming\Bitcoin --satoshi-port=8331 --skip-online-check still get offline 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:919 - C++ block utilities loaded successfully 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1009 - 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1010 - 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1011 - 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1012 - ************************************************************ 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1013 - Invoked: C:\Program Files (x86)\Armory\ArmoryQt.exe 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1014 - ************************************************************ 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1015 - Loading Armory Engine: 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1016 - Armory Version : 0.91 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1017 - PyBtcWallet Version : 1.35 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1018 - Detected Operating system: Windows 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1019 - OS Variant : 7-6.1.7601-SP1-Multiprocessor Free 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1020 - User home-directory : C:\Users\bob\AppData\Roaming 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1021 - Satoshi BTC directory : C:\Users\bob\AppData\Roaming\Bitcoin\ 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1022 - Armory home dir : C:\Users\bob\AppData\Roaming\Armory\ 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1023 - Detected System Specs : 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1024 - Total Available RAM : 15.99 GB 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1025 - CPU ID string : Intel64 Family 5 Model 24 Stepping 2, GenuineIntel 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1026 - Number of CPU cores : 6 cores 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1027 - System is 64-bit : False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1028 - Preferred Encoding : cp1252 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1029 - 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1030 - Network Name: Main Network 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1031 - Satoshi Port: 8333 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1032 - Named options/arguments to armoryengine.py: 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - maxOpenFiles : 0 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - nettimeout : 2 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - rescan : False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - leveldbDir : DEFAULT 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - ignoreAllZC : False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - port : None 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - interport : 8223 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - coverageOutputDir: None 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - rebuild : False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - datadir : DEFAULT 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - offline : False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - noWalletCheck : False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - satoshiPort : DEFAULT 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - netlog : False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - keypool : 100 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - coverageInclude : None 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - forceOnline : False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - skipAnnounceCheck: False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - redownload : False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - disableTorrent : False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - testAnnounceCode: False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - mtdebug : False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - skipVerCheck : False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - settingsPath : C:\Users\bob\AppData\Roaming\Armory\ArmorySettings.txt 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - verbosity : None 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - doDebug : False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - testnet : False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - rpcport : DEFAULT 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - satoshiHome : DEFAULT 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - satoshiRpcport : DEFAULT 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - logDisable : False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - logFile : C:\Users\bob\AppData\Roaming\Armory\ArmoryQt.exe.log.txt 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1035 - Other arguments: 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1038 - ************************************************************ 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1386 - C++ block utilities loaded successfully 2014-04-19 14:12 (INFO) -- BDM.pyc:1420 - Using the asynchronous/multi-threaded BlockDataManager. 2014-04-19 14:12 (INFO) -- BDM.pyc:1421 - Blockchain operations will happen in the background. 2014-04-19 14:12 (INFO) -- BDM.pyc:1422 - Devs: check TheBDM.getBDMState() before asking for data. 2014-04-19 14:12 (INFO) -- BDM.pyc:1423 - Registering addresses during rescans will queue them for 2014-04-19 14:12 (INFO) -- BDM.pyc:1424 - inclusion after the current scan is completed. 2014-04-19 14:13 (INFO) -- ArmoryUtils.pyc:3007 - Using settings file: C:\Users\bob\AppData\Roaming\Armory\ArmorySettings.txt 2014-04-19 14:13 (INFO) -- announcefetch.pyc:83 - Reading files in fetcher directory: 2014-04-19 14:13 (INFO) -- announcefetch.pyc:92 - announce : 52b6e5624ed25b90d2d2a783ab87635b048aa8b7cb14b21a958ad052faee8691 2014-04-19 14:13 (INFO) -- announcefetch.pyc:92 - bootstrap : 0c68367a6126ed922c90fd06f6b3dc2217248b595adf5c6a1832cdeb4a3ae0b7 2014-04-19 14:13 (INFO) -- announcefetch.pyc:92 - changelog : 00e39ea889395a7148dea87274ee60e484c97c67905b65c67782290dad945639 2014-04-19 14:13 (INFO) -- announcefetch.pyc:92 - downloads : b553c42962f36961f7ac56b85bdd8d6656a16a95c2ce0bc9d60670165825f786 2014-04-19 14:13 (INFO) -- announcefetch.pyc:92 - notify : 011ee87ce2b50a18a06ca4a05f95c5a8f7dc9d55cced2a4654c609eea2795f4c 2014-04-19 14:13 (INFO) -- announcefetch.pyc:249 - Fetching: https://bitcoinarmory.com/announce.txt?osvar=7&os=win&ver=0.91&id=e7d396f6 2014-04-19 14:13 (INFO) -- ArmoryQt.py:2244 - loadWalletsAndSettings 2014-04-19 14:13 (INFO) -- ArmoryQt.py:2302 - Loading wallets... 2014-04-19 14:13 (ERROR) -- announcefetch.pyc:261 - Specified URL was inaccessible 2014-04-19 14:13 (ERROR) -- announcefetch.pyc:262 - Tried: https://bitcoinarmory.com/announce.txt?osvar=7&os=win&ver=0.91&id=e7d396f6 2014-04-19 14:13 (INFO) -- announcefetch.pyc:249 - Fetching: https://s3.amazonaws.com/bitcoinarmory-media/announce.txt?ver=0.91 2014-04-19 14:13 (ERROR) -- announcefetch.pyc:261 - Specified URL was inaccessible 2014-04-19 14:13 (ERROR) -- announcefetch.pyc:262 - Tried: https://s3.amazonaws.com/bitcoinarmory-media/announce.txt?ver=0.91 2014-04-19 14:13 (WARNING) -- announcefetch.pyc:275 - Error fetching announce digest 2014-04-19 14:13 (INFO) -- ArmoryQt.py:2351 - Number of wallets read in: 1 2014-04-19 14:13 (INFO) -- ArmoryQt.py:2356 - Wallet (dgfhfgdhg): "gdfhfgdhdfghgdhm" (Encrypted) 2014-04-19 14:13 (INFO) -- ArmoryQt.py:1786 - Setting up networking... 2014-04-19 14:13 (ERROR) -- ArmoryQt.py:1829 - Error checking for internet connection Traceback (most recent call last): File "ArmoryQt.py", line 1827, in setupNetworking File "urllib2.pyc", line 127, in urlopen File "urllib2.pyc", line 404, in open File "urllib2.pyc", line 422, in _open File "urllib2.pyc", line 382, in _call_chain File "urllib2.pyc", line 1214, in http_open File "urllib2.pyc", line 1184, in do_open URLError: <urlopen error [Errno 11004] getaddrinfo failed> 2014-04-19 14:13 (ERROR) -- ArmoryQt.py:1830 - Run --skip-online-check if you think this is an error 2014-04-19 14:13 (INFO) -- ArmoryQt.py:1838 - Internet connection is Available: False 2014-04-19 14:13 (INFO) -- ArmoryQt.py:1839 - Bitcoin-Qt/bitcoind is Available: 0 2014-04-19 14:13 (INFO) -- ArmoryQt.py:1840 - The first blk*.dat was Available: True 2014-04-19 14:13 (INFO) -- ArmoryQt.py:1841 - Online mode currently possible: False 2014-04-19 14:13 (INFO) -- ArmoryQt.py:2028 - loadBlockchainIfNecessary 2014-04-19 14:13 (INFO) -- ArmoryQt.py:2074 - Setting netmode: 0 2014-04-19 14:13 (INFO) -- BDM.pyc:431 - Setting online mode: False (wait=False) 2014-04-19 14:13 (INFO) -- ArmoryQt.py:1099 - setupUriRegistration 2014-04-19 14:13 (INFO) -- ArmoryQt.py:1167 - Armory already registered for current user. Done! 2014-04-19 14:13 (INFO) -- ArmoryQt.py:585 - Usermode: Expert 2014-04-19 14:13 (INFO) -- ArmoryQt.py:1366 - Changing usermode: 2014-04-19 14:13 (INFO) -- ArmoryQt.py:1367 - From: Expert 2014-04-19 14:13 (INFO) -- ArmoryQt.py:1375 - To: Expert 2014-04-19 14:13 (INFO) -- ArmoryQt.py:4914 - Switching Armory state text to Mgmt:User, State:OfflineNoSatoshiNoInternet 2014-04-19 14:13 (INFO) -- ArmoryQt.py:4856 - Switching Armory functional mode to "Offline" 2014-04-19 14:13 (INFO) -- ArmoryQt.py:698 - MinimizeOnOpen is True 2014-04-19 14:43 (INFO) -- announcefetch.pyc:249 - Fetching: https://bitcoinarmory.com/announce.txt?osvar=7&os=win&ver=0.91&id=e7d396f6 2014-04-19 14:43 (ERROR) -- announcefetch.pyc:261 - Specified URL was inaccessible 2014-04-19 14:43 (ERROR) -- announcefetch.pyc:262 - Tried: https://bitcoinarmory.com/announce.txt?osvar=7&os=win&ver=0.91&id=e7d396f6 2014-04-19 14:43 (INFO) -- announcefetch.pyc:249 - Fetching: https://s3.amazonaws.com/bitcoinarmory-media/announce.txt?ver=0.91 2014-04-19 14:53 (INFO) -- ArmoryQt.py:6150 - BDM is safe for clean shutdown 2014-04-19 14:53 (INFO) -- BDM.pyc:1346 - Shutdown Requested 2014-04-19 14:53 (ERROR) -- BDM.pyc:1141 - Resetting BDM and all wallets 2014-04-19 14:53 (INFO) -- BDM.pyc:1393 - BDM is shutdown. 2014-04-19 14:53 (INFO) -- SDM.pyc:636 - Called stopBitcoind 2014-04-19 14:53 (INFO) -- SDM.pyc:638 - ...but bitcoind is not running, to be able to stop 2014-04-19 14:53 (INFO) -- ArmoryQt.py:6162 - Attempting to close the main window! 2014-04-19 14:53 (INFO) -- ArmoryQt.py:6435 - Resetting BlockDataMgr, freeing memory 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:919 - C++ block utilities loaded successfully 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1009 - 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1010 - 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1011 - 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1012 - ************************************************************ 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1013 - Invoked: C:\Program Files (x86)\Armory\ArmoryQt.exe 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1014 - ************************************************************ 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1015 - Loading Armory Engine: 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1016 - Armory Version : 0.91 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1017 - PyBtcWallet Version : 1.35 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1018 - Detected Operating system: Windows 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1019 - OS Variant : 7-6.1.7601-SP1-Multiprocessor Free 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1020 - User home-directory : C:\Users\bob\AppData\Roaming 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1021 - Satoshi BTC directory : C:\Users\bob\AppData\Roaming\Bitcoin\ 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1022 - Armory home dir : C:\Users\bob\AppData\Roaming\Armory\ 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1023 - Detected System Specs : 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1024 - Total Available RAM : 15.99 GB 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1025 - CPU ID string : Intel64 Family 5 Model 24 Stepping 2, GenuineIntel 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1026 - Number of CPU cores : 6 cores 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1027 - System is 64-bit : False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1028 - Preferred Encoding : cp1252 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1029 - 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1030 - Network Name: Main Network 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1031 - Satoshi Port: 8333 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1032 - Named options/arguments to armoryengine.py: 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - maxOpenFiles : 0 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - nettimeout : 2 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - rescan : False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - leveldbDir : DEFAULT 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - ignoreAllZC : False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - port : None 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - interport : 8223 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - coverageOutputDir: None 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - rebuild : False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - datadir : DEFAULT 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - offline : False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - noWalletCheck : False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - satoshiPort : DEFAULT 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - netlog : False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - keypool : 100 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - coverageInclude : None 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - forceOnline : False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - skipAnnounceCheck: False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - redownload : False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - disableTorrent : False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - testAnnounceCode: False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - mtdebug : False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - skipVerCheck : False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - settingsPath : C:\Users\bob\AppData\Roaming\Armory\ArmorySettings.txt 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - verbosity : None 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - doDebug : False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - testnet : False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - rpcport : DEFAULT 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - satoshiHome : DEFAULT 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - satoshiRpcport : DEFAULT 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - logDisable : False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - logFile : C:\Users\bob\AppData\Roaming\Armory\ArmoryQt.exe.log.txt 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1035 - Other arguments: 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1038 - ************************************************************ 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1386 - C++ block utilities loaded successfully 2014-04-19 14:53 (INFO) -- BDM.pyc:1420 - Using the asynchronous/multi-threaded BlockDataManager. 2014-04-19 14:53 (INFO) -- BDM.pyc:1421 - Blockchain operations will happen in the background. 2014-04-19 14:53 (INFO) -- BDM.pyc:1422 - Devs: check TheBDM.getBDMState() before asking for data. 2014-04-19 14:53 (INFO) -- BDM.pyc:1423 - Registering addresses during rescans will queue them for 2014-04-19 14:53 (INFO) -- BDM.pyc:1424 - inclusion after the current scan is completed. 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:3007 - Using settings file: C:\Users\bob\AppData\Roaming\Armory\ArmorySettings.txt 2014-04-19 14:53 (INFO) -- announcefetch.pyc:83 - Reading files in fetcher directory: 2014-04-19 14:53 (INFO) -- announcefetch.pyc:92 - announce : 52b6e5624ed25b90d2d2a783ab87635b048aa8b7cb14b21a958ad052faee8691 2014-04-19 14:53 (INFO) -- announcefetch.pyc:92 - bootstrap : 0c68367a6126ed922c90fd06f6b3dc2217248b595adf5c6a1832cdeb4a3ae0b7 2014-04-19 14:53 (INFO) -- announcefetch.pyc:92 - changelog : 00e39ea889395a7148dea87274ee60e484c97c67905b65c67782290dad945639 2014-04-19 14:53 (INFO) -- announcefetch.pyc:92 - downloads : b553c42962f36961f7ac56b85bdd8d6656a16a95c2ce0bc9d60670165825f786 2014-04-19 14:53 (INFO) -- announcefetch.pyc:92 - notify : 011ee87ce2b50a18a06ca4a05f95c5a8f7dc9d55cced2a4654c609eea2795f4c 2014-04-19 14:53 (INFO) -- announcefetch.pyc:249 - Fetching: https://bitcoinarmory.com/announce.txt?osvar=7&os=win&ver=0.91&id=e7d396f6 2014-04-19 14:53 (INFO) -- ArmoryQt.py:2244 - loadWalletsAndSettings 2014-04-19 14:53 (INFO) -- ArmoryQt.py:2302 - Loading wallets... 2014-04-19 14:53 (INFO) -- ArmoryQt.py:2351 - Number of wallets read in: 1 2014-04-19 14:53 (INFO) -- ArmoryQt.py:2356 - Wallet (dfghdfgh): "gdfghfdghdfghfghddfgh" (Encrypted) 2014-04-19 14:53 (INFO) -- ArmoryQt.py:1786 - Setting up networking... 2014-04-19 14:53 (INFO) -- ArmoryQt.py:1838 - Internet connection is Available: True 2014-04-19 14:53 (INFO) -- ArmoryQt.py:1839 - Bitcoin-Qt/bitcoind is Available: 0 2014-04-19 14:53 (INFO) -- ArmoryQt.py:1840 - The first blk*.dat was Available: True 2014-04-19 14:53 (INFO) -- ArmoryQt.py:1841 - Online mode currently possible: 0 2014-04-19 14:53 (INFO) -- ArmoryQt.py:2028 - loadBlockchainIfNecessary 2014-04-19 14:53 (INFO) -- ArmoryQt.py:2074 - Setting netmode: 0 2014-04-19 14:53 (INFO) -- BDM.pyc:431 - Setting online mode: False (wait=False) 2014-04-19 14:53 (INFO) -- ArmoryQt.py:1099 - setupUriRegistration 2014-04-19 14:53 (INFO) -- ArmoryQt.py:1167 - Armory already registered for current user. Done! 2014-04-19 14:53 (INFO) -- ArmoryQt.py:585 - Usermode: Expert 2014-04-19 14:53 (INFO) -- ArmoryQt.py:1366 - Changing usermode: 2014-04-19 14:53 (INFO) -- ArmoryQt.py:1367 - From: Expert 2014-04-19 14:53 (INFO) -- ArmoryQt.py:1375 - To: Expert 2014-04-19 14:53 (ERROR) -- announcefetch.pyc:261 - Specified URL was inaccessible 2014-04-19 14:53 (ERROR) -- announcefetch.pyc:262 - Tried: https://bitcoinarmory.com/announce.txt?osvar=7&os=win&ver=0.91&id=e7d396f6 2014-04-19 14:53 (INFO) -- announcefetch.pyc:249 - Fetching: https://s3.amazonaws.com/bitcoinarmory-media/announce.txt?ver=0.91 2014-04-19 14:53 (INFO) -- ArmoryQt.py:4914 - Switching Armory state text to Mgmt:User, State:OfflineNoSatoshi 2014-04-19 14:53 (INFO) -- ArmoryQt.py:4856 - Switching Armory functional mode to "Offline" 2014-04-19 14:53 (INFO) -- ArmoryQt.py:698 - MinimizeOnOpen is True 2014-04-19 14:53 (INFO) -- ArmoryQt.py:6334 - Another Armory instance just tried to open.
|
|
|
|
etotheipi (OP)
Legendary
Offline
Activity: 1428
Merit: 1093
Core Armory Developer
|
|
April 19, 2014, 02:09:23 PM |
|
ok after entering the following in the shortcut target --satoshi-datadir=C:\Users\bob\AppData\Roaming\Bitcoin --satoshi-port=8331 --skip-online-check still get offline 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:919 - C++ block utilities loaded successfully 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1009 - 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1010 - 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1011 - 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1012 - ************************************************************ 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1013 - Invoked: C:\Program Files (x86)\Armory\ArmoryQt.exe 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1014 - ************************************************************ 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1015 - Loading Armory Engine: 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1016 - Armory Version : 0.91 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1017 - PyBtcWallet Version : 1.35 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1018 - Detected Operating system: Windows 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1019 - OS Variant : 7-6.1.7601-SP1-Multiprocessor Free 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1020 - User home-directory : C:\Users\bob\AppData\Roaming 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1021 - Satoshi BTC directory : C:\Users\bob\AppData\Roaming\Bitcoin\ 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1022 - Armory home dir : C:\Users\bob\AppData\Roaming\Armory\ 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1023 - Detected System Specs : 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1024 - Total Available RAM : 15.99 GB 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1025 - CPU ID string : Intel64 Family 5 Model 24 Stepping 2, GenuineIntel 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1026 - Number of CPU cores : 6 cores 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1027 - System is 64-bit : False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1028 - Preferred Encoding : cp1252 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1029 - 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1030 - Network Name: Main Network 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1031 - Satoshi Port: 8333 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1032 - Named options/arguments to armoryengine.py: 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - maxOpenFiles : 0 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - nettimeout : 2 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - rescan : False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - leveldbDir : DEFAULT 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - ignoreAllZC : False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - port : None 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - interport : 8223 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - coverageOutputDir: None 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - rebuild : False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - datadir : DEFAULT 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - offline : False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - noWalletCheck : False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - satoshiPort : DEFAULT 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - netlog : False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - keypool : 100 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - coverageInclude : None 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - forceOnline : False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - skipAnnounceCheck: False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - redownload : False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - disableTorrent : False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - testAnnounceCode: False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - mtdebug : False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - skipVerCheck : False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - settingsPath : C:\Users\bob\AppData\Roaming\Armory\ArmorySettings.txt 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - verbosity : None 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - doDebug : False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - testnet : False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - rpcport : DEFAULT 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - satoshiHome : DEFAULT 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - satoshiRpcport : DEFAULT 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - logDisable : False 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1034 - logFile : C:\Users\bob\AppData\Roaming\Armory\ArmoryQt.exe.log.txt 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1035 - Other arguments: 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1038 - ************************************************************ 2014-04-19 14:12 (INFO) -- ArmoryUtils.pyc:1386 - C++ block utilities loaded successfully 2014-04-19 14:12 (INFO) -- BDM.pyc:1420 - Using the asynchronous/multi-threaded BlockDataManager. 2014-04-19 14:12 (INFO) -- BDM.pyc:1421 - Blockchain operations will happen in the background. 2014-04-19 14:12 (INFO) -- BDM.pyc:1422 - Devs: check TheBDM.getBDMState() before asking for data. 2014-04-19 14:12 (INFO) -- BDM.pyc:1423 - Registering addresses during rescans will queue them for 2014-04-19 14:12 (INFO) -- BDM.pyc:1424 - inclusion after the current scan is completed. 2014-04-19 14:13 (INFO) -- ArmoryUtils.pyc:3007 - Using settings file: C:\Users\bob\AppData\Roaming\Armory\ArmorySettings.txt 2014-04-19 14:13 (INFO) -- announcefetch.pyc:83 - Reading files in fetcher directory: 2014-04-19 14:13 (INFO) -- announcefetch.pyc:92 - announce : 52b6e5624ed25b90d2d2a783ab87635b048aa8b7cb14b21a958ad052faee8691 2014-04-19 14:13 (INFO) -- announcefetch.pyc:92 - bootstrap : 0c68367a6126ed922c90fd06f6b3dc2217248b595adf5c6a1832cdeb4a3ae0b7 2014-04-19 14:13 (INFO) -- announcefetch.pyc:92 - changelog : 00e39ea889395a7148dea87274ee60e484c97c67905b65c67782290dad945639 2014-04-19 14:13 (INFO) -- announcefetch.pyc:92 - downloads : b553c42962f36961f7ac56b85bdd8d6656a16a95c2ce0bc9d60670165825f786 2014-04-19 14:13 (INFO) -- announcefetch.pyc:92 - notify : 011ee87ce2b50a18a06ca4a05f95c5a8f7dc9d55cced2a4654c609eea2795f4c 2014-04-19 14:13 (INFO) -- announcefetch.pyc:249 - Fetching: https://bitcoinarmory.com/announce.txt?osvar=7&os=win&ver=0.91&id=e7d396f6 2014-04-19 14:13 (INFO) -- ArmoryQt.py:2244 - loadWalletsAndSettings 2014-04-19 14:13 (INFO) -- ArmoryQt.py:2302 - Loading wallets... 2014-04-19 14:13 (ERROR) -- announcefetch.pyc:261 - Specified URL was inaccessible 2014-04-19 14:13 (ERROR) -- announcefetch.pyc:262 - Tried: https://bitcoinarmory.com/announce.txt?osvar=7&os=win&ver=0.91&id=e7d396f6 2014-04-19 14:13 (INFO) -- announcefetch.pyc:249 - Fetching: https://s3.amazonaws.com/bitcoinarmory-media/announce.txt?ver=0.91 2014-04-19 14:13 (ERROR) -- announcefetch.pyc:261 - Specified URL was inaccessible 2014-04-19 14:13 (ERROR) -- announcefetch.pyc:262 - Tried: https://s3.amazonaws.com/bitcoinarmory-media/announce.txt?ver=0.91 2014-04-19 14:13 (WARNING) -- announcefetch.pyc:275 - Error fetching announce digest 2014-04-19 14:13 (INFO) -- ArmoryQt.py:2351 - Number of wallets read in: 1 2014-04-19 14:13 (INFO) -- ArmoryQt.py:2356 - Wallet (dgfhfgdhg): "gdfhfgdhdfghgdhm" (Encrypted) 2014-04-19 14:13 (INFO) -- ArmoryQt.py:1786 - Setting up networking... 2014-04-19 14:13 (ERROR) -- ArmoryQt.py:1829 - Error checking for internet connection Traceback (most recent call last): File "ArmoryQt.py", line 1827, in setupNetworking File "urllib2.pyc", line 127, in urlopen File "urllib2.pyc", line 404, in open File "urllib2.pyc", line 422, in _open File "urllib2.pyc", line 382, in _call_chain File "urllib2.pyc", line 1214, in http_open File "urllib2.pyc", line 1184, in do_open URLError: <urlopen error [Errno 11004] getaddrinfo failed> 2014-04-19 14:13 (ERROR) -- ArmoryQt.py:1830 - Run --skip-online-check if you think this is an error 2014-04-19 14:13 (INFO) -- ArmoryQt.py:1838 - Internet connection is Available: False 2014-04-19 14:13 (INFO) -- ArmoryQt.py:1839 - Bitcoin-Qt/bitcoind is Available: 0 2014-04-19 14:13 (INFO) -- ArmoryQt.py:1840 - The first blk*.dat was Available: True 2014-04-19 14:13 (INFO) -- ArmoryQt.py:1841 - Online mode currently possible: False 2014-04-19 14:13 (INFO) -- ArmoryQt.py:2028 - loadBlockchainIfNecessary 2014-04-19 14:13 (INFO) -- ArmoryQt.py:2074 - Setting netmode: 0 2014-04-19 14:13 (INFO) -- BDM.pyc:431 - Setting online mode: False (wait=False) 2014-04-19 14:13 (INFO) -- ArmoryQt.py:1099 - setupUriRegistration 2014-04-19 14:13 (INFO) -- ArmoryQt.py:1167 - Armory already registered for current user. Done! 2014-04-19 14:13 (INFO) -- ArmoryQt.py:585 - Usermode: Expert 2014-04-19 14:13 (INFO) -- ArmoryQt.py:1366 - Changing usermode: 2014-04-19 14:13 (INFO) -- ArmoryQt.py:1367 - From: Expert 2014-04-19 14:13 (INFO) -- ArmoryQt.py:1375 - To: Expert 2014-04-19 14:13 (INFO) -- ArmoryQt.py:4914 - Switching Armory state text to Mgmt:User, State:OfflineNoSatoshiNoInternet 2014-04-19 14:13 (INFO) -- ArmoryQt.py:4856 - Switching Armory functional mode to "Offline" 2014-04-19 14:13 (INFO) -- ArmoryQt.py:698 - MinimizeOnOpen is True 2014-04-19 14:43 (INFO) -- announcefetch.pyc:249 - Fetching: https://bitcoinarmory.com/announce.txt?osvar=7&os=win&ver=0.91&id=e7d396f6 2014-04-19 14:43 (ERROR) -- announcefetch.pyc:261 - Specified URL was inaccessible 2014-04-19 14:43 (ERROR) -- announcefetch.pyc:262 - Tried: https://bitcoinarmory.com/announce.txt?osvar=7&os=win&ver=0.91&id=e7d396f6 2014-04-19 14:43 (INFO) -- announcefetch.pyc:249 - Fetching: https://s3.amazonaws.com/bitcoinarmory-media/announce.txt?ver=0.91 2014-04-19 14:53 (INFO) -- ArmoryQt.py:6150 - BDM is safe for clean shutdown 2014-04-19 14:53 (INFO) -- BDM.pyc:1346 - Shutdown Requested 2014-04-19 14:53 (ERROR) -- BDM.pyc:1141 - Resetting BDM and all wallets 2014-04-19 14:53 (INFO) -- BDM.pyc:1393 - BDM is shutdown. 2014-04-19 14:53 (INFO) -- SDM.pyc:636 - Called stopBitcoind 2014-04-19 14:53 (INFO) -- SDM.pyc:638 - ...but bitcoind is not running, to be able to stop 2014-04-19 14:53 (INFO) -- ArmoryQt.py:6162 - Attempting to close the main window! 2014-04-19 14:53 (INFO) -- ArmoryQt.py:6435 - Resetting BlockDataMgr, freeing memory 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:919 - C++ block utilities loaded successfully 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1009 - 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1010 - 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1011 - 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1012 - ************************************************************ 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1013 - Invoked: C:\Program Files (x86)\Armory\ArmoryQt.exe 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1014 - ************************************************************ 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1015 - Loading Armory Engine: 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1016 - Armory Version : 0.91 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1017 - PyBtcWallet Version : 1.35 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1018 - Detected Operating system: Windows 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1019 - OS Variant : 7-6.1.7601-SP1-Multiprocessor Free 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1020 - User home-directory : C:\Users\bob\AppData\Roaming 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1021 - Satoshi BTC directory : C:\Users\bob\AppData\Roaming\Bitcoin\ 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1022 - Armory home dir : C:\Users\bob\AppData\Roaming\Armory\ 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1023 - Detected System Specs : 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1024 - Total Available RAM : 15.99 GB 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1025 - CPU ID string : Intel64 Family 5 Model 24 Stepping 2, GenuineIntel 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1026 - Number of CPU cores : 6 cores 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1027 - System is 64-bit : False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1028 - Preferred Encoding : cp1252 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1029 - 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1030 - Network Name: Main Network 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1031 - Satoshi Port: 8333 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1032 - Named options/arguments to armoryengine.py: 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - maxOpenFiles : 0 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - nettimeout : 2 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - rescan : False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - leveldbDir : DEFAULT 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - ignoreAllZC : False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - port : None 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - interport : 8223 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - coverageOutputDir: None 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - rebuild : False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - datadir : DEFAULT 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - offline : False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - noWalletCheck : False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - satoshiPort : DEFAULT 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - netlog : False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - keypool : 100 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - coverageInclude : None 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - forceOnline : False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - skipAnnounceCheck: False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - redownload : False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - disableTorrent : False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - testAnnounceCode: False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - mtdebug : False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - skipVerCheck : False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - settingsPath : C:\Users\bob\AppData\Roaming\Armory\ArmorySettings.txt 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - verbosity : None 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - doDebug : False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - testnet : False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - rpcport : DEFAULT 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - satoshiHome : DEFAULT 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - satoshiRpcport : DEFAULT 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - logDisable : False 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1034 - logFile : C:\Users\bob\AppData\Roaming\Armory\ArmoryQt.exe.log.txt 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1035 - Other arguments: 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1038 - ************************************************************ 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:1386 - C++ block utilities loaded successfully 2014-04-19 14:53 (INFO) -- BDM.pyc:1420 - Using the asynchronous/multi-threaded BlockDataManager. 2014-04-19 14:53 (INFO) -- BDM.pyc:1421 - Blockchain operations will happen in the background. 2014-04-19 14:53 (INFO) -- BDM.pyc:1422 - Devs: check TheBDM.getBDMState() before asking for data. 2014-04-19 14:53 (INFO) -- BDM.pyc:1423 - Registering addresses during rescans will queue them for 2014-04-19 14:53 (INFO) -- BDM.pyc:1424 - inclusion after the current scan is completed. 2014-04-19 14:53 (INFO) -- ArmoryUtils.pyc:3007 - Using settings file: C:\Users\bob\AppData\Roaming\Armory\ArmorySettings.txt 2014-04-19 14:53 (INFO) -- announcefetch.pyc:83 - Reading files in fetcher directory: 2014-04-19 14:53 (INFO) -- announcefetch.pyc:92 - announce : 52b6e5624ed25b90d2d2a783ab87635b048aa8b7cb14b21a958ad052faee8691 2014-04-19 14:53 (INFO) -- announcefetch.pyc:92 - bootstrap : 0c68367a6126ed922c90fd06f6b3dc2217248b595adf5c6a1832cdeb4a3ae0b7 2014-04-19 14:53 (INFO) -- announcefetch.pyc:92 - changelog : 00e39ea889395a7148dea87274ee60e484c97c67905b65c67782290dad945639 2014-04-19 14:53 (INFO) -- announcefetch.pyc:92 - downloads : b553c42962f36961f7ac56b85bdd8d6656a16a95c2ce0bc9d60670165825f786 2014-04-19 14:53 (INFO) -- announcefetch.pyc:92 - notify : 011ee87ce2b50a18a06ca4a05f95c5a8f7dc9d55cced2a4654c609eea2795f4c 2014-04-19 14:53 (INFO) -- announcefetch.pyc:249 - Fetching: https://bitcoinarmory.com/announce.txt?osvar=7&os=win&ver=0.91&id=e7d396f6 2014-04-19 14:53 (INFO) -- ArmoryQt.py:2244 - loadWalletsAndSettings 2014-04-19 14:53 (INFO) -- ArmoryQt.py:2302 - Loading wallets... 2014-04-19 14:53 (INFO) -- ArmoryQt.py:2351 - Number of wallets read in: 1 2014-04-19 14:53 (INFO) -- ArmoryQt.py:2356 - Wallet (dfghdfgh): "gdfghfdghdfghfghddfgh" (Encrypted) 2014-04-19 14:53 (INFO) -- ArmoryQt.py:1786 - Setting up networking... 2014-04-19 14:53 (INFO) -- ArmoryQt.py:1838 - Internet connection is Available: True 2014-04-19 14:53 (INFO) -- ArmoryQt.py:1839 - Bitcoin-Qt/bitcoind is Available: 0 2014-04-19 14:53 (INFO) -- ArmoryQt.py:1840 - The first blk*.dat was Available: True 2014-04-19 14:53 (INFO) -- ArmoryQt.py:1841 - Online mode currently possible: 0 2014-04-19 14:53 (INFO) -- ArmoryQt.py:2028 - loadBlockchainIfNecessary 2014-04-19 14:53 (INFO) -- ArmoryQt.py:2074 - Setting netmode: 0 2014-04-19 14:53 (INFO) -- BDM.pyc:431 - Setting online mode: False (wait=False) 2014-04-19 14:53 (INFO) -- ArmoryQt.py:1099 - setupUriRegistration 2014-04-19 14:53 (INFO) -- ArmoryQt.py:1167 - Armory already registered for current user. Done! 2014-04-19 14:53 (INFO) -- ArmoryQt.py:585 - Usermode: Expert 2014-04-19 14:53 (INFO) -- ArmoryQt.py:1366 - Changing usermode: 2014-04-19 14:53 (INFO) -- ArmoryQt.py:1367 - From: Expert 2014-04-19 14:53 (INFO) -- ArmoryQt.py:1375 - To: Expert 2014-04-19 14:53 (ERROR) -- announcefetch.pyc:261 - Specified URL was inaccessible 2014-04-19 14:53 (ERROR) -- announcefetch.pyc:262 - Tried: https://bitcoinarmory.com/announce.txt?osvar=7&os=win&ver=0.91&id=e7d396f6 2014-04-19 14:53 (INFO) -- announcefetch.pyc:249 - Fetching: https://s3.amazonaws.com/bitcoinarmory-media/announce.txt?ver=0.91 2014-04-19 14:53 (INFO) -- ArmoryQt.py:4914 - Switching Armory state text to Mgmt:User, State:OfflineNoSatoshi 2014-04-19 14:53 (INFO) -- ArmoryQt.py:4856 - Switching Armory functional mode to "Offline" 2014-04-19 14:53 (INFO) -- ArmoryQt.py:698 - MinimizeOnOpen is True 2014-04-19 14:53 (INFO) -- ArmoryQt.py:6334 - Another Armory instance just tried to open.
It looks like it's not finding bitcoin-qt but it did find the correct underlying directory. You set --satoshi-port to 8331, is Bitcoin port also set to 8331?
|
|
|
|
|