Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[qqqq]

FEATURES:

- Supports new "dual mining" mode: mining both Ethereum and Decred or Siacoin at the same time, with no impact on Ethereum mining speed. Ethereum-only mining mode is supported as well.
- Effective Ethereum mining speed is higher by 3-5% because of a completely different miner code - much less invalid and outdated shares, higher GPU load, optimized OpenCL code.
- No DAG files.
- Supports all Stratum versions for Ethereum: can be used directly without any proxies with all pools that support eth-proxy, qtminer or miner-proxy.
- Supports Ethereum solo mining.
- Supports both Http and Stratum for Decred.
- Supports failover.
- Displays detailed mining information and hashrate for every card.
- Supports remote monitoring and management.
- Supports GPU selection, built-in GPU overclocking features and temperature management.
- Supports Ethereum forks (Expanse, etc).
- Windows and Linux versions.

I don't see any solo for second coins. Tell me where i'm wrong?

[1715087906]

1715087906

[1715087906]

1715087906

[1715087906]

1715087906

[BenSF]

FEATURES:

- Supports new "dual mining" mode: mining both Ethereum and Decred or Siacoin at the same time, with no impact on Ethereum mining speed. Ethereum-only mining mode is supported as well.
- Effective Ethereum mining speed is higher by 3-5% because of a completely different miner code - much less invalid and outdated shares, higher GPU load, optimized OpenCL code.
- No DAG files.
- Supports all Stratum versions for Ethereum: can be used directly without any proxies with all pools that support eth-proxy, qtminer or miner-proxy.
- Supports Ethereum solo mining.
- Supports both Http and Stratum for Decred.
- Supports failover.
- Displays detailed mining information and hashrate for every card.
- Supports remote monitoring and management.
- Supports GPU selection, built-in GPU overclocking features and temperature management.
- Supports Ethereum forks (Expanse, etc).
- Windows and Linux versions.

I don't see any solo for second coins. Tell me where i'm wrong?

Correct no official solo for second coins

[Zulucia]

Im buyng some Gpus for my new rig.

Did r290x have much more power than r9 290?

Or same thing for mining?

I picked 3 x 290s a couple months ago, at stock settings I hash about 25 MH. I expect a 290x you might see 28... have to weigh the cost up front. I got mine for 179.00 each.

Now, mine are reference coolers... and sapphires, they suck! lol noisy and they run hot! but they have made me some money and perform good, do what I bought them for. Not sure if they make a dual fan 290x... but go with that if they do. Will be much quieter and cooler. Pull about 1000 watts on a 3 rig system. A cheap 1200 watt will suffice  

Undervolt and you will save a ton of electricity, also you could overclock the core gpu and get more MH, they will hash up to 29 mh with a overclock.  290X is just a "factory" overclocked 290.

That is right. Undervolt will make the miner more efficient in terms of Watt/MH/s. I tried this on many GPUs.

[adaseb]

If you have the Reference R9 290 you need to use the Stilt Bios because it will run like crap without it.

Search this forum for those bioses.

[klondike_bar]

If you have the Reference R9 290 you need to use the Stilt Bios because it will run like crap without it.

Search this forum for those bioses.

is that applicable to the reference sapphire 290 as well?

[Claymore]

What about ETH solo/Siacoin solo ?

You should test it by your own. I haven't sufficient powers unfortunately.

Are you serious ? How i can test Siacoin solo if it even not implemented. Waiting for block will never be found or accepted. Re-read my msg. Right now Siacoin solo is not supported as i see in ver. description.

Sia solo is supported. Check readme "SAMPLE USAGE" section:

...
 ethpool, ethermine  (and Siacoin solo):
...

I solved three blocks when I tested v5.0. However, right now Siacoin diff is too high to test solo easily.

[spyshagg]

Im buyng some Gpus for my new rig.

Did r290x have much more power than r9 290?

Or same thing for mining?

I picked 3 x 290s a couple months ago, at stock settings I hash about 25 MH. I expect a 290x you might see 28... have to weigh the cost up front. I got mine for 179.00 each.

Now, mine are reference coolers... and sapphires, they suck! lol noisy and they run hot! but they have made me some money and perform good, do what I bought them for. Not sure if they make a dual fan 290x... but go with that if they do. Will be much quieter and cooler. Pull about 1000 watts on a 3 rig system. A cheap 1200 watt will suffice  

Undervolt and you will save a ton of electricity, also you could overclock the core gpu and get more MH, they will hash up to 29 mh with a overclock.  290X is just a "factory" overclocked 290.

Although while mining Ether they perform about 1% within each other at the same mhz, that is only because Eth doesn't push them.

The 290X has 4 more Compute units than 290  (44 vs 40.  2813 shaders vs 2560), which will provide ~10% more performance in games and other compute intensive applications.


cheers

[Yadamosan]

Im buyng some Gpus for my new rig.

Did r290x have much more power than r9 290?

Or same thing for mining?

I picked 3 x 290s a couple months ago, at stock settings I hash about 25 MH. I expect a 290x you might see 28... have to weigh the cost up front. I got mine for 179.00 each.

Now, mine are reference coolers... and sapphires, they suck! lol noisy and they run hot! but they have made me some money and perform good, do what I bought them for. Not sure if they make a dual fan 290x... but go with that if they do. Will be much quieter and cooler. Pull about 1000 watts on a 3 rig system. A cheap 1200 watt will suffice  

Undervolt and you will save a ton of electricity, also you could overclock the core gpu and get more MH, they will hash up to 29 mh with a overclock.  290X is just a "factory" overclocked 290.

Although while mining Ether they perform about 1% within each other at the same mhz, that is only because Eth doesn't push them.

The 290X has 4 more Compute units than 290  (44 vs 40.  2813 shaders vs 2560), which will provide ~10% more performance in games and other compute intensive applications.


cheers

When you do dual mining with 290 and 290x, will you get more Decred or Siacoin with 290x than 290?

[adaseb]

If you have the Reference R9 290 you need to use the Stilt Bios because it will run like crap without it.

Search this forum for those bioses.

is that applicable to the reference sapphire 290 as well?

Yes

All Reference GPUs are made by AMD.

They aren't made by Sapphire, ASUS, Powercolor, etc.

[DrX]

Please implement stratum connection for Siacoin.
As you already know, there's no stratum protocol for Siacoin yet. Fortunately, Siacoin's mining protocol is quite similar as Ethereum, many things can be adapted.
"Nicehash compatible stratum" or "stratum-mining-proxy from coinotron" style would be good.
(I prefer Nicehash version because it locks down minernonce for each miners and it would be compatible for rental service later. coinotron style stratum is also good.)
As current work polling mining method harms pool server and client performance much,
it would be much better when stratum protocol is implemented.
MiningPoolHub will implement pool side when stratum enabled miner is released.
Thanks.

I can add "stratum-mining-proxy" stratum support for Siacoin. Do you need a private version for tests, right? PM me for details.

Stratum-mining-proxy coming soon for Siacoin?

[allcoinminer]

If you have the Reference R9 290 you need to use the Stilt Bios because it will run like crap without it.

Search this forum for those bioses.

is that applicable to the reference sapphire 290 as well?

Yes

All Reference GPUs are made by AMD.

They aren't made by Sapphire, ASUS, Powercolor, etc.

This a very powerful robust and good quality GPU.
I miss it.

[etoque]

hey

I got problem since 4.6 version with my 270x mining EXP,I have update to last and problem are still here.

After dev fee dag stall and it stay at 0 MH  

thanks

[frostminer]

If you have the Reference R9 290 you need to use the Stilt Bios because it will run like crap without it.

Search this forum for those bioses.

is that applicable to the reference sapphire 290 as well?

Yes

All Reference GPUs are made by AMD.

They aren't made by Sapphire, ASUS, Powercolor, etc.

This a very powerful robust and good quality GPU.
I miss it.

You dont like the 380 or 390?

[senne]

@claymore:

i'm overclocking my gpu's a bit by using -cclock option, hashrate is fine, but after 2 mins or so hashrate of card0 drops back to normal rate.
(in linux), any clues??

@claymore

bump, i think u missed this one..

[Claymore]

@claymore:

i'm overclocking my gpu's a bit by using -cclock option, hashrate is fine, but after 2 mins or so hashrate of card0 drops back to normal rate.
(in linux), any clues??

@claymore

bump, i think u missed this one..

This is called throttling

[alevlaslo]

Hey!

Good Job!

Fury X is 30 eth + 1200 sia

sia more profit than eth today too

system with 4 cards get 1600 watts

t 65 and 50% fans

but gpu3 do not temperature and fan look on miner...

[WhyMe]

Im buyng some Gpus for my new rig.

Did r290x have much more power than r9 290?

Or same thing for mining?

I picked 3 x 290s a couple months ago, at stock settings I hash about 25 MH. I expect a 290x you might see 28... have to weigh the cost up front. I got mine for 179.00 each.

Now, mine are reference coolers... and sapphires, they suck! lol noisy and they run hot! but they have made me some money and perform good, do what I bought them for. Not sure if they make a dual fan 290x... but go with that if they do. Will be much quieter and cooler. Pull about 1000 watts on a 3 rig system. A cheap 1200 watt will suffice  

Same cards here, 26.7MHs @stock with original bios, 27MHs after flashing with optimized bios, but always @stock.
So your 25 is low.
560w for 2 cards ( after undervolt )

[BenSF]

Claymore

Any chance you could build in a benchmark flag? I would be looking for a DCRI range as an input and the ability to log the results of each DCRI

[madmartyk]

I had something very strange happen yesterday.  I was checking my miner and there was someone Teamviewer'ed into it.  from there they went to every machine I have.  I put a stop to it, reinstalled TV with a new address and 2 factor.  The only thing I have done to that machine is installed and was running Claymore 5.0.

VirusTotal gives 5.0/5.1 three hits.  I have been using claymore since the beginning but this is really strange.  Have have forefront and malware bytes running on all machines and they are clean.

I know miners/wallets sometimes have false positives.  But this really un-nerved me...

[spyshagg]

anyone mining siamining.com ?

Been mining for a few time now, haven't received any payout yet.    Unpaid balance = 222.33sc


Faq's only mentions they "credit" you per share, but when does that value hits the wallet?


cheers