Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[haliy-2017]

msi 1060 gaming x PLUS 6Gb???

the type of memory is important. The vendor does not affect this.
1060 6Gb with sams ~25M/h

table for any vendor wint OC 1060 6Gb
https://prnt.sc/k23cuj

Ordinary 1060 6g accelerates to 25, ..., and 1060 6g PLUS gives only 20, .. (memory of the samsung). Did someone else overclock 1060 6g PLUS more than 20, ...?

[1714171268]

1714171268

[Lysak1]

The line in "reboot.bat" file for reboot system should be this ?
- shutdown /r /t 5 /f

[Lysak1]

https://b.radikal.ru/b31/1807/cf/64593471dc8b.jpg

Miner himself turned off at 14-07, & himself turned on at 23-51.
What is a problems ?
Anyone can explain ?

[prostor]

Miner himself turned off at 14-07, & himself turned on at 23-51.
What is a problems ?
Anyone can explain ?

this is easy!
Claymore earns a new island in the ocean.
you must read him several last post.

[ManDoneKTM]

@mehrdadb3

Use srbpolaris 3.4 and the pimp straps and you get more hashrate. It´s the easiest way.
All of my elpidas reach 30,5 - 32 mh.

yeahhh , 55 mh/s reach )))))))))

[Nooby-miner]

Having error "unknown option value after -dcoin option, value ignored"

-dpool stratum+tcp://asia-mine.smartcash.cc:3256 -dwal AJTTHFFNMENDDIOFNFWFFLSW/MinerAAA -dcoin keccak

Its only "Keccak" i have an issue with, its like the algo is not even there.

Using V11.5 btw

[tg88]

The line in "reboot.bat" file for reboot system should be this ?
- shutdown /r /t 5 /f

yes, the rig will restart in 5 seconds.

[mine_phun]

Having error "unknown option value after -dcoin option, value ignored"

-dpool stratum+tcp://asia-mine.smartcash.cc:3256 -dwal AJTTHFFNMENDDIOFNFWFFLSW/MinerAAA -dcoin keccak

Its only "Keccak" i have an issue with, its like the algo is not even there.

Using V11.5 btw

Since the upgrade to their latest 1.2.3 wallet SmartCash gives problems with Claymore. I already sent a message to Claymore but he doesn't respond.

If you want to help me get this resolved for yourself and for the community please try the following:

Step 1 Change your .bat to NLPool >>  -dpool stratum+tcp://mine.nlpool.nl:5133 -dwal AJTTHFFNMENDDIOFNFWFFLSW -dpsw c=SMART -dcoin keccak ... you will probably see the same error?

Step 2 : ) Update to the latest claymore 11.8 miner while on NLpool. I have various reports about the first 10 minutes that it still gives some rejects, but after that it will run better and let it run for a while.

Step 3 : ) Try the same with Claymore 11.8 on the official Smartpool and see if you get the same results there.

Let me know your results please so i can get a better picture of what is goin on.

[Nooby-miner]

Thanks mine_phun!

Claymore V11.8

Official Pool:

ETH Stratum - Connected(blah,blahblah)
KC Stratum - Connected (balh,blah,blah)
ETH Authorized
KC Authorization failed

[b10hazzard]

Hello guys!
I am absolutely new to this. So  anything would be helpful. Today i am gonna try diggin from my personal pc as beginner.  Got 16 GB ram ddr4, six core processor and nvidia gtx 970 (4gb). Any tips would be fine any critics also. I am open to learn so i am prepared for critisism if there's any. So is this basicly good enough configuration just to start learning as beginner before i invest in better machine?
So basicly i did what the guy from the video  guide sais. i edited my bat file and still gettin some error i cant solve by myself:
Appreciate your help!

claymore recommends this:

TESTED NVIDIA DRIVERS (other versions are untested, they can be worse or better):
9xx cards in Windows 7 x64: just use latest/recent drivers from Nvidia website (for example, 368.81). Note that latest 372.54 is slower than 368.81.
9xx cards in Windows 10 x64: you have to use old drivers (for example, 352.xx) and miner built for cuda6.5.

1060 3Gb with memory samsung = 23+ M/h
1060 3Gb with hynix = ~20 M/h
1060 with 6Gb version +10% for hashrate

Thanks for letting me know but i didn't found an version of 352.xx for my drivers.
 If this is useful i am using I would be happy someone to give me where i am wrong because my hashrates are very lo:
AMD Ryzen 5 1600 processor + MSI GTX 970 4 GB video card + 16 GB ram DDR4 2133MHZ + SSD + HDD.
OS: Windows 10 Professional x64

The software i am using is EthereumMiner 11.8 cuda 9.1. Graphics card driver 398.36 (06/26/2018).
So here's the speed of my ethereumminer:

Code:

ETH: 07/05/18-18:17:53 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 1.298 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:18
ETH: GPU0 1.298 Mh/s
ETH: 07/05/18-18:18:00 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 2.294 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:18
ETH: GPU0 2.294 Mh/s

The funny thing is i tried different software but for Bitcoin (NiceHashMiner) and as i can see the speed is quite better:

Code:

[18:37:24][0x00000ff0][info] core | Algorithm 'equihash' speed: 261.213333 H/s
[18:37:29][0x00000ff0][info] core | Algorithm 'equihash' speed: 261.403333 H/s
[18:37:30][0x00000ff0][info] net | equihash | New job '000000858c35d67f', diff=1024
[18:37:34][0x00000ff0][info] core | Algorithm 'equihash' speed: 261.460000 H/s

So probably the problem is in myself . If someone can advice me i'd be happy to carry on learning.
Thanks in advance!

[mine_phun]

Thanks mine_phun!

ETH Stratum - Connected(blah,blahblah)
KC Stratum - Connected (balh,blah,blah)
ETH Authorized
KC Authorization failed

Did you put your real wallet address in?

>>  -dpool stratum+tcp://mine.nlpool.nl:5133 -dwal Your smartcashwallethere -dpsw c=SMART -dcoin keccak

[Nooby-miner]

Thanks mine_phun!

ETH Stratum - Connected(blah,blahblah)
KC Stratum - Connected (balh,blah,blah)
ETH Authorized
KC Authorization failed

Did you put your real wallet address in?

>>  -dpool stratum+tcp://mine.nlpool.nl:5133 -dwal Your smartcashwallethere -dpsw c=SMART -dcoin keccak

whats the "c=smart" in your config ?
Ive omitted "c=smart" and on "mine.nlpool.nl:5133" it mines KC fine but with lots of errors, i never get errors normally, and it dont mine any eth or etc. It do not attempt to mine eth or etc but shows hash rates for both.

whats that pool website address?

[mine_phun]

Thanks mine_phun!

ETH Stratum - Connected(blah,blahblah)
KC Stratum - Connected (balh,blah,blah)
ETH Authorized
KC Authorization failed

Did you put your real wallet address in?

>>  -dpool stratum+tcp://mine.nlpool.nl:5133 -dwal Your smartcashwallethere -dpsw c=SMART -dcoin keccak

Ive not tried that pool yet, will try now, whats the "c=smart" in config ?

it means coin = smart ( Symbol of SmartCash )

[jsays]

The software i am using is EthereumMiner 11.8 cuda 9.1. Graphics card driver 398.36 (06/26/2018).
So here's the speed of my ethereumminer:

Code:

ETH: 07/05/18-18:17:53 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 1.298 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:18
ETH: GPU0 1.298 Mh/s
ETH: 07/05/18-18:18:00 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 2.294 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:18
ETH: GPU0 2.294 Mh/s

The funny thing is i tried different software but for Bitcoin (NiceHashMiner) and as i can see the speed is quite better:

Code:

[18:37:24][0x00000ff0][info] core | Algorithm 'equihash' speed: 261.213333 H/s
[18:37:29][0x00000ff0][info] core | Algorithm 'equihash' speed: 261.403333 H/s
[18:37:30][0x00000ff0][info] net | equihash | New job '000000858c35d67f', diff=1024
[18:37:34][0x00000ff0][info] core | Algorithm 'equihash' speed: 261.460000 H/s

So probably the problem is in myself . If someone can advice me i'd be happy to carry on learning.
Thanks in advance!

B10hazzard,

You are comparing different algorithms, so you should expect drastically varying hash rates. That said, you are suggesting that ~260H/s is faster than 1.3~2.3Mh/s, and that is incorrect. 1.3Mh/s is equal to 1,300Kh/s and in turn 1,300,000h/s....which is many times greater than 260h/s.

[Nooby-miner]

If i include c=smart it says "Unknown Option c=smart"

[Nooby-miner]

@ mine_phun
ok i corrected my config. I put "x" after dspw, so removed it and just have "-dspw c=Smart" now it mines both etc and (smart with your pool)
what is your sites landing page please? I see your other thread with lots of info, and would like to give your pool a go for some time and compare.
I will try with ETH now, and let you know.

Thanks!

[Nooby-miner]

ok got it working with both eth and etc, with mining smart on your pool. Dude im impressed at earnings, beats official pool 20-1 of what i was earning there mining it, and it alone. Im mining eth and smart on your pool and beating by 2000% what i would earn on official smartcashpool. Very impressed. Im sticking around your pool

Heres my config now, but getting lot of errors mining smart "zero" errors mining eth. Dual mining  94mh/s eth 600mh/s smart
-dpool stratum+tcp://mine.nlpool.nl:5133 -dwal Mywalletaddress -dpsw c=SMART -dcoin keccak -dcri 21,21,21

[mine_phun]

@ mine_phun
ok i corrected my config. I put "x" after dspw, so removed it and just have "-dspw c=Smart" now it mines both etc and (smart with your pool)
what is your sites landing page please? I see your other thread with lots of info, and would like to give your pool a go for some time and compare.
I will try with ETH now, and let you know.

Thanks!

Our webpage is NLpool.nl :-)

Good to see you satisfied! 

[fewyun]

-ttli intensity effects wrong GPU when paired with -di

For example (6x GPU): `-fanmin 50 -tt 63 -ttli 68 -di 01345`
(Fan indexed GPU2 is not selected)

Hashrates:
`Currently -ttli reduces intensity for: GPU0 (-20%) GPU3 (-80%)`
`ETH: GPU0 21.046 Mh/s, GPU1 27.064 Mh/s, GPU2 27.054 Mh/s, GPU3 6.673 Mh/s, GPU4 27.055 Mh/s`

Temps/Fans:
`GPU0 t=69C fan=100%, GPU1 t=68C fan=92%, GPU2 t=46C fan=47%, GPU3 t=72C fan=100%, GPU4 t=55C fan=47%, GPU5 t=68C fan=100%`

Fan indexed GPU3 exceeds 68C, so Miner indexed GPU2 should be throttled.

Instead, Miner indexed GPU3 is throttled, resulting in low temps and fan speed on Fan indexed GPU4. And higher temps on Fan indexed GPU3 than should be allowed.

-ttli should be updated to account for changes to indexing caused by -di

Also, the same behavior occurs while using `-altnum 2` (since that is purely a display fix for the indexing)

[Raja_MBZ]

How many hash rate should be without overclocking for 1070 armor?

I'm getting around 31 Mh/s Ethereum hashrate with my 1070, and it's without overclocking.