PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[br2459]

Does anyone know if there is a fix, other than increasing power, for nvidia rigs to not lose hashrate over time? DO linux users have the same issue? Or is the problem global in terms of OS?

all nvidias 1070 are with same problem..... no fix ahead ((((

So one interesting tidbit on the issue is that I have 4 1070 TI's that don't suffer from the slow down. They are still going 34MH/s strong. But the other question is, do you get the same problem with Linux as well as Windows or is this just a Windows issue?

[BogdanCo]

Does anyone know if there is a fix, other than increasing power, for nvidia rigs to not lose hashrate over time? DO linux users have the same issue? Or is the problem global in terms of OS?

all nvidias 1070 are with same problem..... no fix ahead ((((

So one interesting tidbit on the issue is that I have 4 1070 TI's that don't suffer from the slow down. They are still going 34MH/s strong. But the other question is, do you get the same problem with Linux as well as Windows or is this just a Windows issue?

Also on linux is the same, you have to increase the power limit. For example my 1080ti's were doing 51-53 MH/s with 190W, now I have to give them 210W to do the same.

[Branko]

Any idea what could cause this? (there are two cards in PC, one RX580 and one RX560)

[ankah]

Any known issues with Vega 64 (8gb, 4 cards)?
I have a brand new rig, fresh install and the whole system freezes around 22 to 25 seconds in, very consistently.
Windows 10

[zeezoo]

Any idea what could cause this? (there are two cards in PC, one RX580 and one RX560)

https://i.imgur.com/x5okhvo.png

Did you try DDU and fresh drivers?

[zeezoo]

Any known issues with Vega 64 (8gb, 4 cards)?
I have a brand new rig, fresh install and the whole system freezes around 22 to 25 seconds in, very consistently.
Windows 10

Log? Any tweaking? Under/Overclocking? Undervolting? Hard to tell without details

[ankah]

Any known issues with Vega 64 (8gb, 4 cards)?
I have a brand new rig, fresh install and the whole system freezes around 22 to 25 seconds in, very consistently.
Windows 10

Log? Any tweaking? Under/Overclocking? Undervolting? Hard to tell without details

Let me look at getting logs. No, nothing was done one way or another. I figured I would run it, see where it was and go on from there.

[ankah]

Any known issues with Vega 64 (8gb, 4 cards)?
I have a brand new rig, fresh install and the whole system freezes around 22 to 25 seconds in, very consistently.
Windows 10

Log? Any tweaking? Under/Overclocking? Undervolting? Hard to tell without details

Let me look at getting logs. No, nothing was done one way or another. I figured I would run it, see where it was and go on from there.

What is the proper way to post the log? As code?

Anyhow, the last few lines of the last crash, which is about the same as the other logs.

2020.06.26:10:37:48.951: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2020.06.26:10:37:48.951: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0)
2020.06.26:10:37:48.956: GPU4 GPU4: DAG generated in 10.5 s (360.2 MB/s)
2020.06.26:10:37:48.958: GPU4 GPU4: Using Ethash OCL kernels (gfx900; -clkernel 1)
2020.06.26:10:37:48.958: GPU4 GPU4: no -gt value specified, switching to auto-tune
2020.06.26:10:37:48.958: GPU4 GPU4: starting auto-tune process
2020.06.26:10:37:49.313: GPU1 GPU1: DAG 100%
2020.06.26:10:37:49.472: GPU1 GPU1: DAG generated in 10.6 s (356.9 MB/s)
2020.06.26:10:37:49.475: GPU1 GPU1: Using Ethash OCL kernels (gfx900; -clkernel 1)
2020.06.26:10:37:49.475: GPU1 GPU1: no -gt value specified, switching to auto-tune
2020.06.26:10:37:49.475: GPU1 GPU1: starting auto-tune process
2020.06.26:10:37:51.322: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":
2020.06.26:10:37:51.322: eths Eth: New job #f98eea2b from ssl://us1.ethermine.org:5555; diff: 4000MH

[zeezoo]

Any known issues with Vega 64 (8gb, 4 cards)?
I have a brand new rig, fresh install and the whole system freezes around 22 to 25 seconds in, very consistently.
Windows 10

Log? Any tweaking? Under/Overclocking? Undervolting? Hard to tell without details

Let me look at getting logs. No, nothing was done one way or another. I figured I would run it, see where it was and go on from there.

What is the proper way to post the log? As code?

Anyhow, the last few lines of the last crash, which is about the same as the other logs.

2020.06.26:10:37:48.951: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2020.06.26:10:37:48.951: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0)
2020.06.26:10:37:48.956: GPU4 GPU4: DAG generated in 10.5 s (360.2 MB/s)
2020.06.26:10:37:48.958: GPU4 GPU4: Using Ethash OCL kernels (gfx900; -clkernel 1)
2020.06.26:10:37:48.958: GPU4 GPU4: no -gt value specified, switching to auto-tune
2020.06.26:10:37:48.958: GPU4 GPU4: starting auto-tune process
2020.06.26:10:37:49.313: GPU1 GPU1: DAG 100%
2020.06.26:10:37:49.472: GPU1 GPU1: DAG generated in 10.6 s (356.9 MB/s)
2020.06.26:10:37:49.475: GPU1 GPU1: Using Ethash OCL kernels (gfx900; -clkernel 1)
2020.06.26:10:37:49.475: GPU1 GPU1: no -gt value specified, switching to auto-tune
2020.06.26:10:37:49.475: GPU1 GPU1: starting auto-tune process
2020.06.26:10:37:51.322: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":
2020.06.26:10:37:51.322: eths Eth: New job #f98eea2b from ssl://us1.ethermine.org:5555; diff: 4000MH

Does the computer crash as well? If yes it might be an issue with power supply, cause it doesn't mine at all. You can try to underclock memory (-mclock) and core (-cclock) a little bit but since GPUs are new they should work at stock frequencies with no issues.

[booze]

Anyone care to share their batch file commands for nVidia cards? Im running a 1080ti with standard commands

PhoenixMiner.exe -pool eu1-etc.ethermine.org:4444 -wal XXXXXXXXXXXXXXXXXXXXXXXXX.RigA -dpool stratum+tcp://blake2s.sea.mine.zpool.ca:5766 -dwal XXXXXXXXXXXXXXXXXXXXXXX-dcoin blake2s
pause

Examples of OC would be appreciated. Enjoy your weekend!

[zeezoo]

Anyone care to share their batch file commands for nVidia cards? Im running a 1080ti with standard commands

PhoenixMiner.exe -pool eu1-etc.ethermine.org:4444 -wal XXXXXXXXXXXXXXXXXXXXXXXXX.RigA -dpool stratum+tcp://blake2s.sea.mine.zpool.ca:5766 -dwal XXXXXXXXXXXXXXXXXXXXXXX-dcoin blake2s
pause

Examples of OC would be appreciated. Enjoy your weekend!

I'm using MSI Afterburner to control NVIDIA cards as it is possible to undervolt, Phoenix doesn't support undervolting at the moment. Currently running one single fan card @ 1645 Mhz, 774mv and +800 to memory clocks - 44 MH/s & 62-63c and MSI @ 1822 MHz, 825mv and +800 to memory - 48 MH/s and 58-60c. I'm trying to save as much power as possible.

[Branko]

Any idea what could cause this? (there are two cards in PC, one RX580 and one RX560)

Did you try DDU and fresh drivers?

I did DDU and installed last drivers and last phoenix and got above problem. Previous driver + phoenix 4.9 worked fine

[booze]

Anyone care to share their batch file commands for nVidia cards? Im running a 1080ti with standard commands

PhoenixMiner.exe -pool eu1-etc.ethermine.org:4444 -wal XXXXXXXXXXXXXXXXXXXXXXXXX.RigA -dpool stratum+tcp://blake2s.sea.mine.zpool.ca:5766 -dwal XXXXXXXXXXXXXXXXXXXXXXX-dcoin blake2s
pause

Examples of OC would be appreciated. Enjoy your weekend!

I'm using MSI Afterburner to control NVIDIA cards as it is possible to undervolt, Phoenix doesn't support undervolting at the moment. Currently running one single fan card @ 1645 Mhz, 774mv and +800 to memory clocks - 44 MH/s & 62-63c and MSI @ 1822 MHz, 825mv and +800 to memory - 48 MH/s and 58-60c. I'm trying to save as much power as possible.

thanks mate, im only getting 37mhs for some reason though :/

[AzzAz]

Any idea what could cause this? (there are two cards in PC, one RX580 and one RX560)

Did you try DDU and fresh drivers?

I did DDU and installed last drivers and last phoenix and got above problem. Previous driver + phoenix 4.9 worked fine

...so NO last driver...last that Phoenix team included is 20.4.2

[Branko]

Any idea what could cause this? (there are two cards in PC, one RX580 and one RX560)

Did you try DDU and fresh drivers?

I did DDU and installed last drivers and last phoenix and got above problem. Previous driver + phoenix 4.9 worked fine

...so NO last driver...last that Phoenix team included is 20.4.2

I downgraded both Phoenix miner to 4,9c and driver to 20.4.2, no luck.
Only remaining suspect could be latest windows 10 build 2004

before you ask why, this is not rig but my PC, so I always try to have latest everything

[cidman]

Any idea what could cause this? (there are two cards in PC, one RX580 and one RX560)

has to be cuz of windows registry
that sometimes happens when the same GPU is listed 2x and DDU should fix it
i would say try another windows drive and see if it happens there as well
then ull know for sure if its something stuck in reg or not
if u go to device manager and show hidden devices ull prolly see it there

[zeezoo]

Anyone care to share their batch file commands for nVidia cards? Im running a 1080ti with standard commands

PhoenixMiner.exe -pool eu1-etc.ethermine.org:4444 -wal XXXXXXXXXXXXXXXXXXXXXXXXX.RigA -dpool stratum+tcp://blake2s.sea.mine.zpool.ca:5766 -dwal XXXXXXXXXXXXXXXXXXXXXXX-dcoin blake2s
pause

Examples of OC would be appreciated. Enjoy your weekend!

I'm using MSI Afterburner to control NVIDIA cards as it is possible to undervolt, Phoenix doesn't support undervolting at the moment. Currently running one single fan card @ 1645 Mhz, 774mv and +800 to memory clocks - 44 MH/s & 62-63c and MSI @ 1822 MHz, 825mv and +800 to memory - 48 MH/s and 58-60c. I'm trying to save as much power as possible.

thanks mate, im only getting 37mhs for some reason though :/

Are you using ETHlargement pill?

[booze]

Anyone care to share their batch file commands for nVidia cards? Im running a 1080ti with standard commands

PhoenixMiner.exe -pool eu1-etc.ethermine.org:4444 -wal XXXXXXXXXXXXXXXXXXXXXXXXX.RigA -dpool stratum+tcp://blake2s.sea.mine.zpool.ca:5766 -dwal XXXXXXXXXXXXXXXXXXXXXXX-dcoin blake2s
pause

Examples of OC would be appreciated. Enjoy your weekend!

I'm using MSI Afterburner to control NVIDIA cards as it is possible to undervolt, Phoenix doesn't support undervolting at the moment. Currently running one single fan card @ 1645 Mhz, 774mv and +800 to memory clocks - 44 MH/s & 62-63c and MSI @ 1822 MHz, 825mv and +800 to memory - 48 MH/s and 58-60c. I'm trying to save as much power as possible.

thanks mate, im only getting 37mhs for some reason though :/

Are you using ETHlargement pill?

yes i am, but i was dual mining as well which is probably the problem. i think i will try claymore and dual mine sia for a while.

[Branko]

yes i am, but i was dual mining as well which is probably the problem. i think i will try claymore and dual mine sia for a while.

Why? Currently, to mine $1 worth SIA you'll need to mine for 1307 years with that card

[booze]

yes i am, but i was dual mining as well which is probably the problem. i think i will try claymore and dual mine sia for a while.

Why? Currently, to mine $1 worth SIA you'll need to mine for 1307 years with that card

good point hahaha thanks