xxasaxx
Newbie
 Offline
Activity: 1
Merit: 0
|
 |
June 30, 2017, 10:04:49 AM |
|
Hi, I have 3 rigs. The first rig gigabyte 970a ds3p motherboard is working smoothly with 5 gpu working. I did 2 rig setup yesterday. But this time we used the ASUS z270P prime motherboard. This motherboard runs up to 8 cards on windows. it's none of my business. I just want to open 5 cards on simplemining. But this motherboard model does not see any simple 5 cards. If 5 cards are plugged in 4 looks 4 plugs sometimes plugs 4 sometimes 3. I made the motherboard bios update. I made the decoding settings for gen1 and 4g but this time it does not open simplemining error. Please tell me how I can run 5 gpu with this motherboard please help me. bad english speak so sorry.  |
|
|
|
|
|
|
|
|
|
The forum strives to allow free discussion of any ideas. All policies are built around this principle. This doesn't mean you can post garbage, though: posts should actually contain ideas, and these ideas should be argued reasonably.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
Epaka
Newbie
Offline
Activity: 18
Merit: 0
|
 |
June 30, 2017, 11:13:53 PM |
|
Hi, I have 3 rigs. The first rig gigabyte 970a ds3p motherboard is working smoothly with 5 gpu working. I did 2 rig setup yesterday. But this time we used the ASUS z270P prime motherboard. This motherboard runs up to 8 cards on windows. it's none of my business. I just want to open 5 cards on simplemining. But this motherboard model does not see any simple 5 cards. If 5 cards are plugged in 4 looks 4 plugs sometimes plugs 4 sometimes 3. I made the motherboard bios update. I made the decoding settings for gen1 and 4g but this time it does not open simplemining error. Please tell me how I can run 5 gpu with this motherboard please help me. bad english speak so sorry. Have you tried the latest BIOS update for that motherboard? I know there is a crypto currency option in the bios on the newest version. Might help. Other wise I'd check your risers, maybe swap some out. |
|
|
|
|
icmine
Newbie
Offline
Activity: 1
Merit: 0
|
|
July 01, 2017, 01:09:20 AM |
|
Hi,
I'm running 2x AMD RX580 and I'm getting 21.99 Hashrate. I tried overclocking and most of the time it reduces or stays around the same hashrate. Can please help? I've watched some videos on flashing the BIOS. However, I thought I can do the same via simeplemining.net. Please advise.
|
|
|
|
|
Epaka
Newbie
Offline
Activity: 18
Merit: 0
|
|
July 01, 2017, 01:11:41 AM |
|
Hi,
I'm running 2x AMD RX580 and I'm getting 21.99 Hashrate. I tried overclocking and most of the time it reduces or stays around the same hashrate. Can please help? I've watched some videos on flashing the BIOS. However, I thought I can do the same via simeplemining.net. Please advise.
Google how to flash bios, you can copy the 1750 strap and OC via SMOS and you will get 27-29 depending on your card most likely. |
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4116
Merit: 7850
'The right to privacy matters'
|
|
July 01, 2017, 01:16:26 AM |
|
is this the latest amd+nvidia image? |
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
July 01, 2017, 04:33:16 AM |
|
is this the latest amd+nvidia image? the hyperlink in simplemining.net for NVIDIA is the URL above |
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
xamaniac
Newbie
Offline
Activity: 3
Merit: 0
|
|
July 01, 2017, 09:49:23 AM |
|
So i have read a majority of this thread and done some troubleshooting but i still cannot get my new rig working. It will sometimes mine and i will start adjusting settings and then out of no where it will hang at starting miner when i reboot. So i go back to standard settings try again and it still hangs. I adjust some more sometimes it runs sometimes it just hangs.
Setup:
MSI Z270A-Pro (With recommened bios settings per tytanick and is the latest version)
8GB Ram
6x RX580 (with modded bios)
Powered Risers
Troubleshooting:
I have all the proper bios settings recommended by this thread. I even tried changing settings around to un-recommended. I tried writing a new flash drive with the OS. I swapped out all risers twice, I moved around cards to different slots, checked power for everything. Tried running just 5 cards tried running just 4 cards. I was using a Portable wireless access point for wired connection so i moved the rig and hard wired it straight to the router. Have tried Different Claymore versions as well.
At a loss here any help would be greatly appreciated.
|
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
July 01, 2017, 01:48:17 PM |
|
So i have read a majority of this thread and done some troubleshooting but i still cannot get my new rig working. It will sometimes mine and i will start adjusting settings and then out of no where it will hang at starting miner when i reboot. So i go back to standard settings try again and it still hangs. I adjust some more sometimes it runs sometimes it just hangs.
Setup:
MSI Z270A-Pro (With recommened bios settings per tytanick and is the latest version)
8GB Ram
6x RX580 (with modded bios)
Powered Risers
Troubleshooting:
I have all the proper bios settings recommended by this thread. I even tried changing settings around to un-recommended. I tried writing a new flash drive with the OS. I swapped out all risers twice, I moved around cards to different slots, checked power for everything. Tried running just 5 cards tried running just 4 cards. I was using a Portable wireless access point for wired connection so i moved the rig and hard wired it straight to the router. Have tried Different Claymore versions as well.
At a loss here any help would be greatly appreciated.
PSU? enough juice for all 6 cards? 6 modded cards = around 900-1000watts (no dual mining) you need at least good PSU of 1200w |
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
voltlon
Newbie
Offline
Activity: 11
Merit: 0
|
|
July 01, 2017, 02:45:45 PM |
|
Hi
simplemining web down?
|
|
|
|
|
|
skdsw
|
|
July 01, 2017, 03:09:22 PM |
|
|
|
|
|
|
|
kaltar
|
|
July 01, 2017, 03:52:14 PM |
|
So i have read a majority of this thread and done some troubleshooting but i still cannot get my new rig working. It will sometimes mine and i will start adjusting settings and then out of no where it will hang at starting miner when i reboot. So i go back to standard settings try again and it still hangs. I adjust some more sometimes it runs sometimes it just hangs.
Setup:
MSI Z270A-Pro (With recommened bios settings per tytanick and is the latest version)
8GB Ram
6x RX580 (with modded bios)
Powered Risers
Troubleshooting:
I have all the proper bios settings recommended by this thread. I even tried changing settings around to un-recommended. I tried writing a new flash drive with the OS. I swapped out all risers twice, I moved around cards to different slots, checked power for everything. Tried running just 5 cards tried running just 4 cards. I was using a Portable wireless access point for wired connection so i moved the rig and hard wired it straight to the router. Have tried Different Claymore versions as well.
At a loss here any help would be greatly appreciated.
i also a similar problem and it was a bad riser pcie connector from a usb riser , i would just look at it and it would stop mining, crash, not detect the card, etc.. try mining 1 card at a time, and slowly add a card one at a time. it will take a long time but if it's a riser you'll find witch one is causing you headaches.. |
|
|
|
|
|
il_minatore
|
|
July 01, 2017, 04:02:02 PM |
|
Hi, how to mix R and RX cards?
Thanks
|
|
|
|
|
|
xleejohnx
|
|
July 01, 2017, 04:05:57 PM |
|
Hi, how to mix R and RX cards?
Thanks
You can't with this os |
As I see a super coin as the super highway and alt coins as taxis and trucks needed to move transactions. ~philipma1957
|
|
|
thepixelgeek
Newbie
Offline
Activity: 59
Merit: 0
|
|
July 01, 2017, 04:13:56 PM |
|
is this the latest amd+nvidia image? the hyperlink in simplemining.net for NVIDIA is the URL above pixelgeek 12:08 PM @tytanick will 16GB stick work with new single OS (AMD/Nvid)? tytanick Admin 12:08 PM Has joined the channel. tytanick Admin 12:08 PM yes 8 GB will be ok |
|
|
|
|
xamaniac
Newbie
Offline
Activity: 3
Merit: 0
|
|
July 01, 2017, 04:59:28 PM |
|
So i have read a majority of this thread and done some troubleshooting but i still cannot get my new rig working. It will sometimes mine and i will start adjusting settings and then out of no where it will hang at starting miner when i reboot. So i go back to standard settings try again and it still hangs. I adjust some more sometimes it runs sometimes it just hangs.
Setup:
MSI Z270A-Pro (With recommened bios settings per tytanick and is the latest version)
8GB Ram
6x RX580 (with modded bios)
Powered Risers
Troubleshooting:
I have all the proper bios settings recommended by this thread. I even tried changing settings around to un-recommended. I tried writing a new flash drive with the OS. I swapped out all risers twice, I moved around cards to different slots, checked power for everything. Tried running just 5 cards tried running just 4 cards. I was using a Portable wireless access point for wired connection so i moved the rig and hard wired it straight to the router. Have tried Different Claymore versions as well.
At a loss here any help would be greatly appreciated.
PSU? enough juice for all 6 cards? 6 modded cards = around 900-1000watts (no dual mining) you need at least good PSU of 1200w Im running a 1600w and a 900w power is good. So i have read a majority of this thread and done some troubleshooting but i still cannot get my new rig working. It will sometimes mine and i will start adjusting settings and then out of no where it will hang at starting miner when i reboot. So i go back to standard settings try again and it still hangs. I adjust some more sometimes it runs sometimes it just hangs.
Setup:
MSI Z270A-Pro (With recommened bios settings per tytanick and is the latest version)
8GB Ram
6x RX580 (with modded bios)
Powered Risers
Troubleshooting:
I have all the proper bios settings recommended by this thread. I even tried changing settings around to un-recommended. I tried writing a new flash drive with the OS. I swapped out all risers twice, I moved around cards to different slots, checked power for everything. Tried running just 5 cards tried running just 4 cards. I was using a Portable wireless access point for wired connection so i moved the rig and hard wired it straight to the router. Have tried Different Claymore versions as well.
At a loss here any help would be greatly appreciated.
i also a similar problem and it was a bad riser pcie connector from a usb riser , i would just look at it and it would stop mining, crash, not detect the card, etc.. try mining 1 card at a time, and slowly add a card one at a time. it will take a long time but if it's a riser you'll find witch one is causing you headaches.. So i may have found the issue i think it was one of my video cards. I have 5 running perfectly now. I don't think that single card could handle the undervolting all the others could. I have a few more of the same card i will try a different one once i get them modded. Does anyone know if adjusting the config mvddc and cvddc actually effect the cards or does only the SMoS powerstage effect voltage? |
|
|
|
|
|
il_minatore
|
|
July 01, 2017, 05:02:54 PM |
|
Someone tested gtx970,gtx980 or gtx980ti?
|
|
|
|
|
albertojames
Newbie
Offline
Activity: 15
Merit: 0
|
|
July 02, 2017, 02:40:52 AM |
|
Hello
Any ETA for SimpleRigResseter?
|
|
|
|
|
techno8k
Newbie
Offline
Activity: 31
Merit: 0
|
|
July 02, 2017, 05:22:54 PM |
|
Is there a way to access the claymore log so I can see which card keeps causing the system to reboot while Im asleep?
|
|
|
|
|
bythesea2
Newbie
Offline
Activity: 1
Merit: 0
|
|
July 02, 2017, 07:55:14 PM |
|
Hi How do you get the GPU power usage to show in the miner console as you have above? My miner console looks as follows: https://i.imgur.com/z3xRzIT.png |
|
|
|
|
Adamantine
Newbie
Offline
Activity: 1
Merit: 0
|
|
July 02, 2017, 10:10:52 PM |
|
hi we are still have strange problems. 2 month normal work, everything was fine. and now 2 weeks of that things.
OverClocking is fine and never changing
when i try to lower OC nothing happens
and reboot is not problem
problem is strange MH/s. one card can show 58 mh/s or 0...usualy 29 or 28 but now somw strange numbers and then rig go restart, or else one or 3 cards not seen.....
1-2 month was perfect
and now all rigs having problems
maybe its because of last updates?
i can download old version of simpleminer maybe i can do something with auto updates?
to turn it off
i dont know am i first who write about this problem
but i know that im not the only one
can u help me please?
|
|
|
|
|
|
