xxasaxx
Newbie
Offline
Activity: 1
Merit: 0
|
|
June 30, 2017, 10:04:49 AM |
|
Hi, I have 3 rigs. The first rig gigabyte 970a ds3p motherboard is working smoothly with 5 gpu working. I did 2 rig setup yesterday. But this time we used the ASUS z270P prime motherboard. This motherboard runs up to 8 cards on windows. it's none of my business. I just want to open 5 cards on simplemining. But this motherboard model does not see any simple 5 cards. If 5 cards are plugged in 4 looks 4 plugs sometimes plugs 4 sometimes 3. I made the motherboard bios update. I made the decoding settings for gen1 and 4g but this time it does not open simplemining error. Please tell me how I can run 5 gpu with this motherboard please help me. bad english speak so sorry.
|
|
|
|
|
|
|
According to NIST and ECRYPT II, the cryptographic algorithms used in
Bitcoin are expected to be strong until at least 2030. (After that, it
will not be too difficult to transition to different algorithms.)
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
Epaka
Newbie
Offline
Activity: 18
Merit: 0
|
|
June 30, 2017, 11:13:53 PM |
|
Hi, I have 3 rigs. The first rig gigabyte 970a ds3p motherboard is working smoothly with 5 gpu working. I did 2 rig setup yesterday. But this time we used the ASUS z270P prime motherboard. This motherboard runs up to 8 cards on windows. it's none of my business. I just want to open 5 cards on simplemining. But this motherboard model does not see any simple 5 cards. If 5 cards are plugged in 4 looks 4 plugs sometimes plugs 4 sometimes 3. I made the motherboard bios update. I made the decoding settings for gen1 and 4g but this time it does not open simplemining error. Please tell me how I can run 5 gpu with this motherboard please help me. bad english speak so sorry. Have you tried the latest BIOS update for that motherboard? I know there is a crypto currency option in the bios on the newest version. Might help. Other wise I'd check your risers, maybe swap some out.
|
|
|
|
icmine
Newbie
Offline
Activity: 1
Merit: 0
|
|
July 01, 2017, 01:09:20 AM |
|
Hi,
I'm running 2x AMD RX580 and I'm getting 21.99 Hashrate. I tried overclocking and most of the time it reduces or stays around the same hashrate. Can please help? I've watched some videos on flashing the BIOS. However, I thought I can do the same via simeplemining.net. Please advise.
|
|
|
|
Epaka
Newbie
Offline
Activity: 18
Merit: 0
|
|
July 01, 2017, 01:11:41 AM |
|
Hi,
I'm running 2x AMD RX580 and I'm getting 21.99 Hashrate. I tried overclocking and most of the time it reduces or stays around the same hashrate. Can please help? I've watched some videos on flashing the BIOS. However, I thought I can do the same via simeplemining.net. Please advise.
Google how to flash bios, you can copy the 1750 strap and OC via SMOS and you will get 27-29 depending on your card most likely.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4116
Merit: 7858
'The right to privacy matters'
|
|
July 01, 2017, 01:16:26 AM |
|
is this the latest amd+nvidia image?
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
July 01, 2017, 04:33:16 AM |
|
is this the latest amd+nvidia image? the hyperlink in simplemining.net for NVIDIA is the URL above
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
xamaniac
Newbie
Offline
Activity: 3
Merit: 0
|
|
July 01, 2017, 09:49:23 AM |
|
So i have read a majority of this thread and done some troubleshooting but i still cannot get my new rig working. It will sometimes mine and i will start adjusting settings and then out of no where it will hang at starting miner when i reboot. So i go back to standard settings try again and it still hangs. I adjust some more sometimes it runs sometimes it just hangs.
Setup: MSI Z270A-Pro (With recommened bios settings per tytanick and is the latest version) 8GB Ram 6x RX580 (with modded bios) Powered Risers
Troubleshooting: I have all the proper bios settings recommended by this thread. I even tried changing settings around to un-recommended. I tried writing a new flash drive with the OS. I swapped out all risers twice, I moved around cards to different slots, checked power for everything. Tried running just 5 cards tried running just 4 cards. I was using a Portable wireless access point for wired connection so i moved the rig and hard wired it straight to the router. Have tried Different Claymore versions as well.
At a loss here any help would be greatly appreciated.
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
July 01, 2017, 01:48:17 PM |
|
So i have read a majority of this thread and done some troubleshooting but i still cannot get my new rig working. It will sometimes mine and i will start adjusting settings and then out of no where it will hang at starting miner when i reboot. So i go back to standard settings try again and it still hangs. I adjust some more sometimes it runs sometimes it just hangs.
Setup: MSI Z270A-Pro (With recommened bios settings per tytanick and is the latest version) 8GB Ram 6x RX580 (with modded bios) Powered Risers
Troubleshooting: I have all the proper bios settings recommended by this thread. I even tried changing settings around to un-recommended. I tried writing a new flash drive with the OS. I swapped out all risers twice, I moved around cards to different slots, checked power for everything. Tried running just 5 cards tried running just 4 cards. I was using a Portable wireless access point for wired connection so i moved the rig and hard wired it straight to the router. Have tried Different Claymore versions as well.
At a loss here any help would be greatly appreciated.
PSU? enough juice for all 6 cards? 6 modded cards = around 900-1000watts (no dual mining) you need at least good PSU of 1200w
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
voltlon
Newbie
Offline
Activity: 11
Merit: 0
|
|
July 01, 2017, 02:45:45 PM |
|
Hi
simplemining web down?
|
|
|
|
skdsw
|
|
July 01, 2017, 03:09:22 PM |
|
|
|
|
|
kaltar
|
|
July 01, 2017, 03:52:14 PM |
|
So i have read a majority of this thread and done some troubleshooting but i still cannot get my new rig working. It will sometimes mine and i will start adjusting settings and then out of no where it will hang at starting miner when i reboot. So i go back to standard settings try again and it still hangs. I adjust some more sometimes it runs sometimes it just hangs.
Setup: MSI Z270A-Pro (With recommened bios settings per tytanick and is the latest version) 8GB Ram 6x RX580 (with modded bios) Powered Risers
Troubleshooting: I have all the proper bios settings recommended by this thread. I even tried changing settings around to un-recommended. I tried writing a new flash drive with the OS. I swapped out all risers twice, I moved around cards to different slots, checked power for everything. Tried running just 5 cards tried running just 4 cards. I was using a Portable wireless access point for wired connection so i moved the rig and hard wired it straight to the router. Have tried Different Claymore versions as well.
At a loss here any help would be greatly appreciated.
i also a similar problem and it was a bad riser pcie connector from a usb riser , i would just look at it and it would stop mining, crash, not detect the card, etc.. try mining 1 card at a time, and slowly add a card one at a time. it will take a long time but if it's a riser you'll find witch one is causing you headaches..
|
|
|
|
il_minatore
|
|
July 01, 2017, 04:02:02 PM |
|
Hi, how to mix R and RX cards? Thanks
|
|
|
|
xleejohnx
|
|
July 01, 2017, 04:05:57 PM |
|
Hi, how to mix R and RX cards? Thanks
You can't with this os
|
As I see a super coin as the super highway and alt coins as taxis and trucks needed to move transactions. ~philipma1957
|
|
|
thepixelgeek
Newbie
Offline
Activity: 59
Merit: 0
|
|
July 01, 2017, 04:13:56 PM |
|
is this the latest amd+nvidia image? the hyperlink in simplemining.net for NVIDIA is the URL above pixelgeek 12:08 PM @tytanick will 16GB stick work with new single OS (AMD/Nvid)? tytanick Admin 12:08 PM Has joined the channel. tytanick Admin 12:08 PM yes 8 GB will be ok
|
|
|
|
xamaniac
Newbie
Offline
Activity: 3
Merit: 0
|
|
July 01, 2017, 04:59:28 PM |
|
So i have read a majority of this thread and done some troubleshooting but i still cannot get my new rig working. It will sometimes mine and i will start adjusting settings and then out of no where it will hang at starting miner when i reboot. So i go back to standard settings try again and it still hangs. I adjust some more sometimes it runs sometimes it just hangs.
Setup: MSI Z270A-Pro (With recommened bios settings per tytanick and is the latest version) 8GB Ram 6x RX580 (with modded bios) Powered Risers
Troubleshooting: I have all the proper bios settings recommended by this thread. I even tried changing settings around to un-recommended. I tried writing a new flash drive with the OS. I swapped out all risers twice, I moved around cards to different slots, checked power for everything. Tried running just 5 cards tried running just 4 cards. I was using a Portable wireless access point for wired connection so i moved the rig and hard wired it straight to the router. Have tried Different Claymore versions as well.
At a loss here any help would be greatly appreciated.
PSU? enough juice for all 6 cards? 6 modded cards = around 900-1000watts (no dual mining) you need at least good PSU of 1200w Im running a 1600w and a 900w power is good. So i have read a majority of this thread and done some troubleshooting but i still cannot get my new rig working. It will sometimes mine and i will start adjusting settings and then out of no where it will hang at starting miner when i reboot. So i go back to standard settings try again and it still hangs. I adjust some more sometimes it runs sometimes it just hangs.
Setup: MSI Z270A-Pro (With recommened bios settings per tytanick and is the latest version) 8GB Ram 6x RX580 (with modded bios) Powered Risers
Troubleshooting: I have all the proper bios settings recommended by this thread. I even tried changing settings around to un-recommended. I tried writing a new flash drive with the OS. I swapped out all risers twice, I moved around cards to different slots, checked power for everything. Tried running just 5 cards tried running just 4 cards. I was using a Portable wireless access point for wired connection so i moved the rig and hard wired it straight to the router. Have tried Different Claymore versions as well.
At a loss here any help would be greatly appreciated.
i also a similar problem and it was a bad riser pcie connector from a usb riser , i would just look at it and it would stop mining, crash, not detect the card, etc.. try mining 1 card at a time, and slowly add a card one at a time. it will take a long time but if it's a riser you'll find witch one is causing you headaches.. So i may have found the issue i think it was one of my video cards. I have 5 running perfectly now. I don't think that single card could handle the undervolting all the others could. I have a few more of the same card i will try a different one once i get them modded. Does anyone know if adjusting the config mvddc and cvddc actually effect the cards or does only the SMoS powerstage effect voltage?
|
|
|
|
il_minatore
|
|
July 01, 2017, 05:02:54 PM |
|
Someone tested gtx970,gtx980 or gtx980ti?
|
|
|
|
albertojames
Newbie
Offline
Activity: 15
Merit: 0
|
|
July 02, 2017, 02:40:52 AM |
|
Hello
Any ETA for SimpleRigResseter?
|
|
|
|
techno8k
Newbie
Offline
Activity: 31
Merit: 0
|
|
July 02, 2017, 05:22:54 PM |
|
Is there a way to access the claymore log so I can see which card keeps causing the system to reboot while Im asleep?
|
|
|
|
bythesea2
Newbie
Offline
Activity: 1
Merit: 0
|
|
July 02, 2017, 07:55:14 PM |
|
Hi How do you get the GPU power usage to show in the miner console as you have above? My miner console looks as follows: https://i.imgur.com/z3xRzIT.png
|
|
|
|
Adamantine
Newbie
Offline
Activity: 1
Merit: 0
|
|
July 02, 2017, 10:10:52 PM |
|
hi we are still have strange problems. 2 month normal work, everything was fine. and now 2 weeks of that things. OverClocking is fine and never changing when i try to lower OC nothing happens and reboot is not problem problem is strange MH/s. one card can show 58 mh/s or 0...usualy 29 or 28 but now somw strange numbers and then rig go restart, or else one or 3 cards not seen..... 1-2 month was perfect and now all rigs having problems maybe its because of last updates? i can download old version of simpleminer maybe i can do something with auto updates? to turn it off i dont know am i first who write about this problem but i know that im not the only one can u help me please?
|
|
|
|
|