SlowGrowth
|
|
July 12, 2017, 12:30:52 PM |
|
I can't overclock my 1050 ti's Can someone help? Same problem here. My 1050 can't overclock, however my 1070 work fine. It seems 1050ti are not yet supported for overclock...
|
|
|
|
toomeke
Newbie
Offline
Activity: 49
Merit: 0
|
|
July 12, 2017, 12:41:01 PM |
|
I have a Sapphire Radeon RX 470 MINING Edition 8192MB GDDR5 Samsung PCI-Express Graphics Card, and I am the following settings for simplemining -epool eth-eu1.nanopool.org:9999 -ewal obfuscated.test1/obfuscated@gmail.com -epsw x -dcoin pasc -dpool pasc-eu1.nanopool.org:15555 -dwal obfuscated.test1/obfuscated@gmail.com -dpsw x on claymore-eth-v9.7It is reporting the following speeds 15.37 MH/s 461.22 MH/sDoes this seem a reasonable speed for this single card? I have never dual mined nor used this card before so I am unsure on what type of hash speeds I should be getting. Thanks. Use the flag below(Taken from the claymore 9.xxx readme txt file), this balances out how much hashing power you want between your main and secondary coins -dcri Decred/Siacoin/Lbry/Pascal intensity, or Ethereum fine-tuning value in ETH-only ASM mode. Default value is 30, you can adjust this value to get the best Decred/Siacoin/Lbry mining speed without reducing Ethereum mining speed. You can also specify values for every card, for example "-dcri 30,100,50". You can change the intensity in runtime with "+" and "-" keys and check current statistics with "s" key. For example, by default (-dcri 30) 390 card shows 29MH/s for Ethereum and 440MH/s for Decred. Setting -dcri 70 causes 24MH/s for Ethereum and 850MH/s for Decred. for me I find -dcri 40 seems a good balance, but tweak and tune to taste
|
|
|
|
|
tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
July 12, 2017, 02:51:13 PM |
|
Update 1108 - added ethminer-0.11.0 miner (it suppouse to be faster on GTX1060)
|
|
|
|
zethiel21
Newbie
Offline
Activity: 4
Merit: 0
|
|
July 12, 2017, 03:02:39 PM |
|
i tried to dual mine eth+sia in ethermine.org, sia doesnt seem to work, in dwarfpool and ethpool, it works, any workaround on that?
|
|
|
|
naeme18720
|
|
July 12, 2017, 03:55:52 PM |
|
Update 1108 - added ethminer-0.11.0 miner (it suppouse to be faster on GTX1060)
Please help me My rigs not working not connected to pool ethermine.org Why In today this happens... Why error error error not connected socket. Pool
|
|
|
|
zethiel21
Newbie
Offline
Activity: 4
Merit: 0
|
|
July 12, 2017, 04:12:24 PM |
|
Update 1108 - added ethminer-0.11.0 miner (it suppouse to be faster on GTX1060)
Please help me My rigs not working not connected to pool ethermine.org Why In today this happens... Why error error error not connected socket. Pool i use this format -epool asia1.ethermine.org:4444 -ewal 0x5f387a2fcf934dadbec5f911c456e4a54a707d945.miner -epsw x just change with your ether wallet
|
|
|
|
naeme18720
|
|
July 12, 2017, 04:15:19 PM |
|
Update 1108 - added ethminer-0.11.0 miner (it suppouse to be faster on GTX1060)
Please help me My rigs not working not connected to pool ethermine.org Why In today this happens... Why error error error not connected socket. Pool i use this format -epool asia1.ethermine.org:4444 -ewal 0x5f387a2fcf934dadbec5f911c456e4a0a707d945.miner -epsw x just change with your ether wallet Thanks but not working U used who version claymore???
|
|
|
|
zethiel21
Newbie
Offline
Activity: 4
Merit: 0
|
|
July 12, 2017, 04:23:58 PM |
|
Update 1108 - added ethminer-0.11.0 miner (it suppouse to be faster on GTX1060)
Please help me My rigs not working not connected to pool ethermine.org Why In today this happens... Why error error error not connected socket. Pool i use this format -epool asia1.ethermine.org:4444 -ewal 0x5f387a2fcf934dadbec5f911c456e4a0a707d945.miner -epsw x just change with your ether wallet Thanks but not working U used who version claymore??? i use 9.7 my problem is i cant use it in dual mining... i need to dual mine with siacoin unfortunately i cant
|
|
|
|
naeme18720
|
|
July 12, 2017, 04:36:21 PM |
|
Update 1108 - added ethminer-0.11.0 miner (it suppouse to be faster on GTX1060)
Please help me My rigs not working not connected to pool ethermine.org Why In today this happens... Why error error error not connected socket. Pool i use this format -epool asia1.ethermine.org:4444 -ewal 0x5f387a2fcf934dadbec5f911c456e4a0a707d945.miner -epsw x just change with your ether wallet Thanks but not working U used who version claymore??? i use 9.7 my problem is i cant use it in dual mining... i need to dual mine with siacoin unfortunately i cant Ok thanks Dual mining best dcr is used my friends .. More profits
|
|
|
|
naeme18720
|
|
July 12, 2017, 04:53:45 PM |
|
Update 1108 - added ethminer-0.11.0 miner (it suppouse to be faster on GTX1060)
Please help me My rigs not working not connected to pool ethermine.org Why In today this happens... Why error error error not connected socket. Pool i use this format -epool asia1.ethermine.org:4444 -ewal 0x5f387a2fcf934dadbec5f911c456e4a0a707d945.miner -epsw x just change with your ether wallet Thanks but not working U used who version claymore??? i use 9.7 my problem is i cant use it in dual mining... i need to dual mine with siacoin unfortunately i cant ETH + DCR: -epool eth.suprnova.cc:5000 -ewal suprnova.1 -epsw x -esm 3 -dpool dcr.suprnova.cc:3252 -dwal suprnova.1 -dpsw x -allpools 1 In pool suprnova.cc
|
|
|
|
Meech
|
|
July 12, 2017, 09:30:39 PM |
|
Update 1108 - added ethminer-0.11.0 miner (it suppouse to be faster on GTX1060)
Please help me My rigs not working not connected to pool ethermine.org Why In today this happens... Why error error error not connected socket. Pool i use this format -epool asia1.ethermine.org:4444 -ewal 0x5f387a2fcf934dadbec5f911c456e4a0a707d945.miner -epsw x just change with your ether wallet Thanks but not working U used who version claymore??? i use 9.7 my problem is i cant use it in dual mining... i need to dual mine with siacoin unfortunately i cant ETH + DCR: -epool eth.suprnova.cc:5000 -ewal suprnova.1 -epsw x -esm 3 -dpool dcr.suprnova.cc:3252 -dwal suprnova.1 -dpsw x -allpools 1 In pool suprnova.cc So that works for you with Decred? But are you still trying to mine Sia? I know my Sia pools require quotations in the config line.
|
|
|
|
Old_Timer
Member
Offline
Activity: 131
Merit: 13
In the fray since 2013.
|
|
July 12, 2017, 09:47:20 PM |
|
anyway to decrease wattage in RX series using smOS?
DPM does not influence power usage that much.
for example I am getting for Single mining (ONLY ETH):
Rig 1: 5* rx470 8gb 125mh/s @810 watt DPM=2 (1075/1850)
Rig 2: 6* rx 470 8gb 150 mh/s @ 900 watt DPM=3 (1075/1900)
Rig 3: 6 rx 470 8gb 160mh/s @950 Watt DMP=4 (1115/2060)
In windows with afterburner I am getting for example 700 watt for rig 1 same hashes same clocks just -96mv in afterburner.
Please tell me I don't have to resort to windows to reduce wattage....
|
|
|
|
Old_Timer
Member
Offline
Activity: 131
Merit: 13
In the fray since 2013.
|
|
July 12, 2017, 10:29:05 PM |
|
anyway to decrease wattage in RX series using smOS?
DPM does not influence power usage that much.
for example I am getting for Single mining (ONLY ETH):
Rig 1: 5* rx470 8gb 125mh/s @810 watt DPM=2 (1075/1850)
Rig 2: 6* rx 470 8gb 150 mh/s @ 900 watt DPM=3 (1075/1900)
Rig 3: 6 rx 470 8gb 160mh/s @950 Watt DMP=4 (1115/2060)
In windows with afterburner I am getting for example 700 watt for rig 1 same hashes same clocks just -96mv in afterburner.
Please tell me I don't have to resort to windows to reduce wattage....
VBIOS mod, a proper one, not PBE shit. Well we could also get a vcore offset setting in smOS and get away without bios mod. Is it not possible to get that functionality in Linux? Also who in heavens told MSI to limit vcore +_100 at afterburner... I have to use Cheat engine to give lower than -100mv!
|
|
|
|
DBjorback
Newbie
Offline
Activity: 2
Merit: 0
|
|
July 13, 2017, 01:21:53 AM |
|
Update 1108 - added ethminer-0.11.0 miner (it suppouse to be faster on GTX1060)
1108 Is not working with Nvidia 1050 TI. Reboots, No overclock - Much slower when it is running. 1107 worked like a champ! How can I go back to 1107?
|
|
|
|
ivvyme
Newbie
Offline
Activity: 26
Merit: 0
|
|
July 13, 2017, 03:25:11 AM |
|
Hi all,
How is the Power Limit (watt) work ? and how do i know what's my limit ?
|
|
|
|
e6o5
Newbie
Offline
Activity: 11
Merit: 0
|
|
July 13, 2017, 03:43:56 AM |
|
Hi all,
How is the Power Limit (watt) work ? and how do i know what's my limit ?
hi, it depends which card you runining. Power limit is max power that your card use. you must experiment. setup overclock freq. and after that lower power than GPU can run.
|
|
|
|
nrai108
Newbie
Offline
Activity: 2
Merit: 0
|
|
July 13, 2017, 09:40:03 AM |
|
my rig: 6* Zotac GTX 1060 mining edition (t/o output) and i got the error "No devices were found" after started mining OS everything else fine, i got this error ad OC screen please help me
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
July 13, 2017, 10:01:16 AM |
|
my rig: 6* Zotac GTX 1060 mining edition (t/o output) and i got the error "No devices were found" after started mining OS everything else fine, i got this error ad OC screen please help me
I think it's a driver issue -- maybe Tytanick can help to update driver list for P106-100 and P104-100 Mining edition. There is a working driver but for Windows at : https://drive.google.com/file/d/0B-_jcpU1s5dgejJJZzBTWVFJYzQ/view?usp=sharing
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
Ireul
Newbie
Offline
Activity: 7
Merit: 0
|
|
July 13, 2017, 10:03:13 AM |
|
I have a Sapphire Radeon RX 470 MINING Edition 8192MB GDDR5 Samsung PCI-Express Graphics Card, and I am the following settings for simplemining -epool eth-eu1.nanopool.org:9999 -ewal obfuscated.test1/obfuscated@gmail.com -epsw x -dcoin pasc -dpool pasc-eu1.nanopool.org:15555 -dwal obfuscated.test1/obfuscated@gmail.com -dpsw x on claymore-eth-v9.7It is reporting the following speeds 15.37 MH/s 461.22 MH/sDoes this seem a reasonable speed for this single card? I have never dual mined nor used this card before so I am unsure on what type of hash speeds I should be getting. Thanks. Use the flag below(Taken from the claymore 9.xxx readme txt file), this balances out how much hashing power you want between your main and secondary coins -dcri Decred/Siacoin/Lbry/Pascal intensity, or Ethereum fine-tuning value in ETH-only ASM mode. Default value is 30, you can adjust this value to get the best Decred/Siacoin/Lbry mining speed without reducing Ethereum mining speed. You can also specify values for every card, for example "-dcri 30,100,50". You can change the intensity in runtime with "+" and "-" keys and check current statistics with "s" key. For example, by default (-dcri 30) 390 card shows 29MH/s for Ethereum and 440MH/s for Decred. Setting -dcri 70 causes 24MH/s for Ethereum and 850MH/s for Decred. for me I find -dcri 40 seems a good balance, but tweak and tune to taste Hi toomeke, thanks for the reply, could you give me some further help with your comment, I have tried setting "-dcri 30", -dcri 50" and -dcri 100" non of which make a difference below is an example of the change I made -epool eth-eu1.nanopool.org:9999 -ewal obfuscated.test1/obfuscated@gmail.com -epsw x -dcoin pasc -dpool pasc-eu1.nanopool.org:15555 -dwal obfuscated.test1/obfuscated@gmail.com -dpsw x To -epool eth-eu1.nanopool.org:9999 -ewal obfuscated.test1/obfuscated@gmail.com -dcri 30 x -dcoin pasc -dpool pasc-eu1.nanopool.org:15555 -dcri 30 obfuscated.test1/obfuscated@gmail.com -dpsw x Which does not seem to change anything.
|
|
|
|
|