OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.1

[TheRealSteve]

Can anyone please give me the link to ck try your luck at solo mining BITCOIN plz? The thread that tells you how to solo mine to your wallet at his pool. If you hit a block it's yours. 

Bitcoin Forum > Bitcoin > Mining > Pools > [∞ YH] solo.ckpool.org 0.5% fee anonymous solo bitcoin mining! 83 blocks solved!
http://solo.ckpool.org/

?

[pekatete]

Hi,
Can anyone please give me the link to ck try your luck at solo mining BITCOIN plz? The thread that tells you how to solo mine to your wallet at his pool. If you hit a block it's yours. 

mine to: stratum+tcp://solo.ckpool.org:3333
with your address

[tbearhere]

Can anyone please give me the link to ck try your luck at solo mining BITCOIN plz? The thread that tells you how to solo mine to your wallet at his pool. If you hit a block it's yours. 

Bitcoin Forum > Bitcoin > Mining > Pools > [∞ YH] solo.ckpool.org 0.5% fee anonymous solo bitcoin mining! 83 blocks solved!
http://solo.ckpool.org/

?

Thank you 

[tbearhere]

Hi,
Can anyone please give me the link to ck try your luck at solo mining BITCOIN plz? The thread that tells you how to solo mine to your wallet at his pool. If you hit a block it's yours. 

mine to: stratum+tcp://solo.ckpool.org:3333
with your address

Thank you 

[-ck]

After I start my cgminer it use only 75 MB RAM

after >5 days it uses 2.9 GB RAM !!!

how


Please explain


I'm using arch linux x64

Which version of cgminer is this you speak of and what driver?

[-ck]

i'm using bitmaintech fork 4.9.0

As you can see from the title of this thread, it is for development and support of the OFFICIAL cgminer only. Seek help from whoever maintains that fork please, or use the official version.

[-ck]

does official version has support for Antminer U3 like they have ?

Yes

[benxvn]

Hey, since yesterday i can't connect to any pool on my RPi using cgminer and two Antminer U3's.

I use this command: sudo ./cgminer --bmsc-options 115200:0.57 -o stratum+tcp://stratum.bitcoin.cz:3333 -u xxx.xxx -p xxx --bmsc-voltage 0800 --bmsc-freq 1286

It always puts out this:

[2015-08-10 11:29:27] Started cgminer 4.9.0
 [2015-08-10 11:29:27] ---------------------start voltage----------------------
 [2015-08-10 11:29:28] Send voltage aab800c0
 [2015-08-10 11:29:28] Send voltage ok
 [2015-08-10 11:29:28] -----------------start freq-------------------
 [2015-08-10 11:29:28] Send frequency 82128614
 [2015-08-10 11:29:29] Send freq getstatus 84000400
 [2015-08-10 11:29:31] Recv 1 freq getstatus=802501020a
 [2015-08-10 11:29:31] Recv 2 freq getstatus=802501020a
 [2015-08-10 11:29:31] Recv 3 freq getstatus=802501020a
 [2015-08-10 11:29:31] Recv 4 freq getstatus=802501020a
 [2015-08-10 11:29:31] --------recv freq getstatus ok finish---------
 [2015-08-10 11:29:32] -----------------start nonce------------------
 [2015-08-10 11:29:32] Bmsc send golden nonce1
 [2015-08-10 11:29:32] Bmsc recv golden nonce1 0345182b9f -- 0345182b
 [2015-08-10 11:29:32] Bmsc send golden nonce2
 [2015-08-10 11:29:32] Bmsc recv golden nonce2 466b30a59f -- 466b30a5
 [2015-08-10 11:29:32] Bmsc send golden nonce3
 [2015-08-10 11:29:32] Bmsc recv golden nonce 857e65ee9f -- 857e65ee
 [2015-08-10 11:29:32] Bmsc send golden nonce4
 [2015-08-10 11:29:32] Bmsc recv golden nonce c6f702849f -- c6f70284
 [2015-08-10 11:29:32] AMU0 Init: mode=default read_time=57ms limit=0ms Hs=2.976100e-09
 [2015-08-10 11:29:32] Probing for an alive pool
 [2015-08-10 11:29:42] Waiting for work to be available from pools.

Sorry i'm kinda nooby and i haven't got really good knowledge.

[-ck]

Hey, since yesterday i can't connect to any pool on my RPi using cgminer and two Antminer U3's.

I use this command: sudo ./cgminer --bmsc-options 115200:0.57 -o stratum+tcp://stratum.bitcoin.cz:3333 -u xxx.xxx -p xxx --bmsc-voltage 0800 --bmsc-freq 1286

It always puts out this:

Sorry i'm kinda nooby and i haven't got really good knowledge.

That's a bitmain forked version based on the use of options that don't exist in the official cgminer. You're on the official cgminer forum thread. Use the official cgminer linked in the top post before asking any questions, or seek help elsewhere for bitmain's version, thanks.

[kano]

does official version has support for Antminer U3 like they have ?

No, it's way better support in cgminer.
It's nothing like the bitmain one that has all sorts of bugs in it.

Our version also does not require any U3 options to work.

[jvamos]

Hey all,

Just wondering if someone could tell me what the --enable-ants1 configuration options are for and if they should be ignored when running CGMiner alongside the pool. Also what is the relationship between the cgminer instance running along side the pool (running the miners) and the cgminer installed on the miners? I want to understand the work relationship. I assume the work is parsed from the pool via the first instance and then work is passed to the cluster of ASICS managed by CGMiner on each respective miner.
Am I way off here?

J

[kano]

Hey all,

Just wondering if someone could tell me what the --enable-ants1 configuration options are for and if they should be ignored when running CGMiner alongside the pool. Also what is the relationship between the cgminer instance running along side the pool (running the miners) and the cgminer installed on the miners? I want to understand the work relationship. I assume the work is parsed from the pool via the first instance and then work is passed to the cluster of ASICS managed by CGMiner on each respective miner.
Am I way off here?

J

Like all other "--enable-*" configure options, it means that you compile in the given driver into the binary you create.
--enable-ants1 is for the Bitmain Antminer S1 (as per the README says)
https://github.com/ckolivas/cgminer/blob/master/README#L116

The S1 runs cgminer just like any other device, you don't run 'another' cgminer anywhere else for it.
But you need to cross compile it for the OpenWRT CPU and then put that cgminer into the S1
... or use my binary https://github.com/kanoi/cgminer-binaries/tree/master/AntS1

You wouldn't compile in AntS1 support for anything but an AntS1 and conversely, you would only compile in AntS1 support, not anything else, if you were cross compiling an AntS1 driver.

Edit: when you run configure it tells you this if you include AntS1 with another driver.

[Mikestang]

Hey, since yesterday i can't connect to any pool on my RPi using cgminer and two Antminer U3's.

Follow ck's advice, but also know that U3s are notoriously unreliable and they could easily have both just died.  In fact that is much more likely than there being any problems with cgminer.  But try 4.9.2 official release and associated --au3 commands.

[Anonymailer]

Due to a request on twitter I've compiled 4.9.2 for Mac
http://macminer.fabulouspanda.com/commandline/cgminer/

And recompiled MacMiner to include it with no other changes (not even docs changing re the move from fabulouspanda.co.uk to fabulouspanda.com - both work but I'm using .com now)
http://macminer.fabulouspanda.com/macminer/downloads/

[-ck]

Due to a request on twitter I've compiled 4.9.2 for Mac
http://macminer.fabulouspanda.com/commandline/cgminer/

Appreciated since 4.9.2 has been the stable release for a while and will be for some time to come, I expect.

[toptek]

You'll probably have to swap the PWM and tachometer terminals on the fan if it is not showing speeds on the second fan.

I tiried to find a guide on how to not sure how to do that .I am willing to runn in a few fans to try it but not sure just how i went looking finding no real way . it just annoying to see the temps and not know that fans exact speed more a cosmetic thing then any thing.I know it doesn't matter .

[wariner]

Hi guys,

I have 2 questions but i not find the response:

1 - Which are the best settings for Antminer S5 of expirytime-scantime-queue for solo-pool (ex. tbdice.org)?
2 - If difficulty is set to 1024 cgminer (v4.8.0) not show share (Accepted 00000080 Diff 0/1024 ) and best share it remains 0 ...this is not a problem for normal pool but for solo pool it's ok? (if i change diff work fine= Accepted 3e047efc Diff 1.06K/341 )

Thank you

ps: i use S5 with latest firmware (cgminer 4.8.0.)

[Mikestang]

Hi guys,

I have 2 questions but i not find the response:

1 - Which are the best settings for Antminer S5 of expirytime-scantime-queue for solo-pool (ex. tbdice.org)?
2 - If difficulty is set to 1024 cgminer (v4.8.0) not show share (Accepted 00000080 Diff 0/1024 ) and best share it remains 0 ...this is not a problem for normal pool but for solo pool it's ok? (if i change diff work fine= Accepted 3e047efc Diff 1.06K/341 )

Thank you

ps: i use S5 with latest firmware (cgminer 4.8.0.)

Post to the S5 thread or to a thread that supports that cgminer fork.  It's been posted several times (and is in capital letters in the thread topic) that this thread is for the OFFICIAL release of cgminer.

[pekatete]

Post to the S5 thread or to a thread that supports that cgminer fork.  It's been posted several times (and is in capital letters in the thread topic) that this thread is for the OFFICIAL release of cgminer.

Stop creating noise by pretending to be the responsible user of this forum, when in actual fact you are just signature-ad spamming. If you are un-happy about a post, just report it to the moderator rather than spam us with your nonsensical posts (you've also just done that in the S3 thread!).

[Mikestang]

This user is currently ignored.