Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[fittsy]

Just thought the community would like to know what the dev fee in Claymore's miner actually converts to in Coins per day and average hash rate at "ONE" of the "-allpools 1" that his miner points at.

Dwarfpool.

Ethereum 0xbaef4a87e8a92ad5911bc5b0a2a02ed9867c0124

Earnings in last 24 Hours

8.026286 ETH
0.46670158 ฿
3824.0407 $

[Current approximate Hash rate

135,565.89 Mh/s
135.56589 Gh/s

Already Paid

699.6276 ETH @ 0.05794500 ETH/BTC

40.53803928 BTC @ $8,232 USDT

Grand total of: $ 333,709

--------------------------------------------------

Not bad for just one of the pools that his miner mines at for 1-2% dev fee is it.

$333k US in dev fee income.

Unbelievable.

Wonder if he gives back.

Cheers

I suspect your numbers are actually low.  He uses multiple addresses to mine too, in addition to using multiple pools.

[1714939056]

1714939056

[fittsy]

I'm having a minor inconvenience with the -epoolsfile option.
I'm using claymore trough Simplemining.net which means that finer folder gets swiped when i switch miner.
This means that the epools.txt gets removed every time and my solution is to copy in a backup from another location.

I have tried to add -epoolsfile and the direct path to the backup file but it does not seem to be able to read that file for some reason.
-epoolsfile /home/miner/epools.txt                                                                           

gives this when I press "r"

Code:

Reloading /home/miner/epools.txt                                                                            
ETH: 1 pool is specified

This refers to the pool entered on the command line.

if I copy this epools.txt to /root/miner/claymore-eth-v11.8/epools.txt and remove the -epools on the command line it gives the following in the log:

Code:

Reloading epools.txt                          
ETH: 4 pools are specified

Which means it reads the file with three pools + the one on the command line

So am I entering the path to the alternative epoolsfile wrongly in some sense or is Claymore unable to use absolute paths (so ../../../home/miner/epools.txt would work better)?
Nah it gives

Code:

Reloading ../../../home/miner/epools.txt
ETH: 1 pool is specified

Did you check your file permissions? Since you're traversing into a different directory structure, what is that directory's permissions?  What is that file's permissions? Which group/user?  You can give read access only to it. You don't need write access to keep the permissions secure.

[NiklasFalk]

The miner is run by root and it has the same owner/group and permissions in both places.
-rw-rw-r-- 1 root root 143 Jul 29 11:32 epools.txt

[backbonemanic]

Looking for some help with my rig. Have been using claymore for a year no issues until now, but yesterday i did a bios update to fix the issue of 5 of 6 GPUs being discovered in device manager and it worked but now claymore crashes almost straight after opening with no error message. This is my log:

19:26:12:713   1c04   args: -epool eth-sg.dwarfpool.com:8008 -ewal 0xB637EEa7E4F0aB00c342AF86529b191d9FAc3075 -mode 1 -epsw x
19:26:12:713   1c04   
19:26:12:713   1c04   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
19:26:12:713   1c04   º                Claymore's Dual GPU Miner - v11.9               º
19:26:12:713   1c04   º              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             º
19:26:12:713   1c04   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
19:26:12:713   1c04   
19:26:12:713   1c04   b597
19:26:12:937   1c04   ETH: 1 pool is specified
19:26:12:937   1c04   Main Ethereum pool is eth-sg.dwarfpool.com:8008

- taken all but one gpu out
- changed risers
- increased virtual mem
- excluded in windows defender and firewall
- uninstalled nvidia and amd drivers with ddu and reinstalled with latest version
- added -mode 1
- pci is all gen1

Rig:
Celeron G3930
Asrock Gaming k4 mobo
4gb ram
1500watt psu
3x 1060
1x 1070
1x 570
1x 580

Dont know what to try next so any ideas are appreciated cheers!

Do you have any AV's, turn them off

Stick to one GPU while doing troubleshoots

try to delete old Claymore files and re-extract new files, create new .bat

gudluck

Cheers tried all this and no luck still crashing the miner

[adaseb]

Looking for some help with my rig. Have been using claymore for a year no issues until now, but yesterday i did a bios update to fix the issue of 5 of 6 GPUs being discovered in device manager and it worked but now claymore crashes almost straight after opening with no error message. This is my log:

19:26:12:713   1c04   args: -epool eth-sg.dwarfpool.com:8008 -ewal 0xB637EEa7E4F0aB00c342AF86529b191d9FAc3075 -mode 1 -epsw x
19:26:12:713   1c04   
19:26:12:713   1c04   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
19:26:12:713   1c04   º                Claymore's Dual GPU Miner - v11.9               º
19:26:12:713   1c04   º              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             º
19:26:12:713   1c04   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
19:26:12:713   1c04   
19:26:12:713   1c04   b597
19:26:12:937   1c04   ETH: 1 pool is specified
19:26:12:937   1c04   Main Ethereum pool is eth-sg.dwarfpool.com:8008

- taken all but one gpu out
- changed risers
- increased virtual mem
- excluded in windows defender and firewall
- uninstalled nvidia and amd drivers with ddu and reinstalled with latest version
- added -mode 1
- pci is all gen1

Rig:
Celeron G3930
Asrock Gaming k4 mobo
4gb ram
1500watt psu
3x 1060
1x 1070
1x 570
1x 580

Dont know what to try next so any ideas are appreciated cheers!

Do you have any AV's, turn them off

Stick to one GPU while doing troubleshoots

try to delete old Claymore files and re-extract new files, create new .bat

gudluck

Cheers tried all this and no luck still crashing the miner

Maybe your Claymore software is corrupted. Try and re-install the current version or try a different version.

You should also just try the XMR or ZEC miner and see if those work. If they work then there is something wrong with the Claymore ETH software.

If they don't work either, then its a different issue.

I am thinking you should try and add more system memory (not video memory) and see if that works. Because its strange that it worked before but now it doesn't.

Maybe its the DAG growing and you need more system RAM. If you don't want to buy more RAM then just use Linux instead which will use less memory.

[backbonemanic]

Looking for some help with my rig. Have been using claymore for a year no issues until now, but yesterday i did a bios update to fix the issue of 5 of 6 GPUs being discovered in device manager and it worked but now claymore crashes almost straight after opening with no error message. This is my log:

19:26:12:713   1c04   args: -epool eth-sg.dwarfpool.com:8008 -ewal 0xB637EEa7E4F0aB00c342AF86529b191d9FAc3075 -mode 1 -epsw x
19:26:12:713   1c04  
19:26:12:713   1c04   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
19:26:12:713   1c04   º                Claymore's Dual GPU Miner - v11.9               º
19:26:12:713   1c04   º              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             º
19:26:12:713   1c04   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
19:26:12:713   1c04  
19:26:12:713   1c04   b597
19:26:12:937   1c04   ETH: 1 pool is specified
19:26:12:937   1c04   Main Ethereum pool is eth-sg.dwarfpool.com:8008

- taken all but one gpu out
- changed risers
- increased virtual mem
- excluded in windows defender and firewall
- uninstalled nvidia and amd drivers with ddu and reinstalled with latest version
- added -mode 1
- pci is all gen1

Rig:
Celeron G3930
Asrock Gaming k4 mobo
4gb ram
1500watt psu
3x 1060
1x 1070
1x 570
1x 580

Dont know what to try next so any ideas are appreciated cheers!

Do you have any AV's, turn them off

Stick to one GPU while doing troubleshoots

try to delete old Claymore files and re-extract new files, create new .bat

gudluck

Cheers tried all this and no luck still crashing the miner

Maybe your Claymore software is corrupted. Try and re-install the current version or try a different version.

You should also just try the XMR or ZEC miner and see if those work. If they work then there is something wrong with the Claymore ETH software.

If they don't work either, then its a different issue.

I am thinking you should try and add more system memory (not video memory) and see if that works. Because its strange that it worked before but now it doesn't.

Maybe its the DAG growing and you need more system RAM. If you don't want to buy more RAM then just use Linux instead which will use less memory.

Tried 8gd of RAM, Claymore xmr miner, phoenix miner and reinstalled claymore eth both v9 and lastest all resulted in the same problem. This started happening as soon as i updated the bios so is there a setting im missing? Iv set all pci to gen 1 and tried enabling above 4g decoding also change around tolud

[dollos]

try setting the pci ex speed for the slots to gen 1

[rigomortis]

Guys... i switched over to Phoenix miner last week and couldn't be happier.  Less dev fee. Lots more shares. Very little stale shares. 

Claymore is playing you for fools... why do newer version of claymore suck more than older version??  cause he's pilfering more shares for you idiots.

[FFI2013]

Looking for some help with my rig. Have been using claymore for a year no issues until now, but yesterday i did a bios update to fix the issue of 5 of 6 GPUs being discovered in device manager and it worked but now claymore crashes almost straight after opening with no error message. This is my log:

19:26:12:713   1c04   args: -epool eth-sg.dwarfpool.com:8008 -ewal 0xB637EEa7E4F0aB00c342AF86529b191d9FAc3075 -mode 1 -epsw x
19:26:12:713   1c04  
19:26:12:713   1c04   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
19:26:12:713   1c04   º                Claymore's Dual GPU Miner - v11.9               º
19:26:12:713   1c04   º              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             º
19:26:12:713   1c04   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
19:26:12:713   1c04  
19:26:12:713   1c04   b597
19:26:12:937   1c04   ETH: 1 pool is specified
19:26:12:937   1c04   Main Ethereum pool is eth-sg.dwarfpool.com:8008

- taken all but one gpu out
- changed risers
- increased virtual mem
- excluded in windows defender and firewall
- uninstalled nvidia and amd drivers with ddu and reinstalled with latest version
- added -mode 1
- pci is all gen1

Rig:
Celeron G3930
Asrock Gaming k4 mobo
4gb ram
1500watt psu
3x 1060
1x 1070
1x 570
1x 580

Dont know what to try next so any ideas are appreciated cheers!

Edit: Tried phoenix miner does pretty much the same thing heres the log:
2018.07.29:15:29:59.924: main Phoenix Miner 3.0c Windows/msvc - Release
2018.07.29:15:29:59.924: main Cmd line: -pool eth-au.dwarfpool.com:8008 -wal 0xB637EEa7E4F0aB00c342AF86529b191d9FAc3075 -pass x

For some reason sometimes I change drivers or use a different miner than go back to using claymore it crashes and the only way I found to fix it is to reinstall Windows I think claymore miners screw with win registry and drivers

[smithjones223]

Can anyone help me with this???

╔════════════════════════════════════════════════════════════════╗
║                Claymore's Dual GPU Miner - v11.9               ║
║              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             ║
╚════════════════════════════════════════════════════════════════╝

ETH: 7 pools are specified
Main Ethereum pool is eth-us-west1.nanopool.org:9999
AMD OpenCL platform not found
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool, "x" to select GPU
CUDA initializing...

NVIDIA Cards available: 6
CUDA Driver Version/Runtime Version: 9.2/8.0
GPU #0: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 7:0:0)
GPU #1: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 9:0:0)
GPU #2: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 11:0:0)
GPU #3: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 12:0:0)
GPU #4: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 13:0:0)
GPU #5: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 14:0:0)
Total cards: 6

You can use "+" and "-" keys to achieve best ETH speed, see "FINE TUNING" section in Readme for details.

ETH: Stratum - connecting to 'eth-us-west1.nanopool.org' <45.32.71.82> port 9999 (unsecure)
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
GPU0 t=50C fan=0%, GPU1 t=49C fan=0%, GPU2 t=51C fan=0%, GPU3 t=49C fan=0%, GPU4 t=51C fan=0%, GPU5 t=54C fan=0%
ETH: eth-proxy stratum mode
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

ETH: Stratum - Connected (eth-us-west1.nanopool.org:9999) (unsecure)
ETH: Authorized
Setting DAG epoch #202...
ETH: 07/30/18-20:22:26 - New job from eth-us-west1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
Setting DAG epoch #202 for GPU2
Setting DAG epoch #202 for GPU1
Setting DAG epoch #202 for GPU0
Setting DAG epoch #202 for GPU4
Setting DAG epoch #202 for GPU3
Setting DAG epoch #202 for GPU5
Create GPU buffer for GPU2
Create GPU buffer for GPU4
Create GPU buffer for GPU5
Create GPU buffer for GPU0
Create GPU buffer for GPU3
Create GPU buffer for GPU1
CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
GPU 3 failed
Setting DAG epoch #202 for GPU3
GPU 4 failed
GPU2 DAG creation time - 7982 ms
GPU 5 failed
Setting DAG epoch #202 for GPU5
Setting DAG epoch #202 for GPU4
GPU0 DAG creation time - 7993 ms
GPU 3, CUDA error 11 - cannot write buffer for DAG
GPU 1 failed
Setting DAG epoch #202 for GPU1
GPU 4, CUDA error 11 - cannot write buffer for DAG
GPU 5, CUDA error 11 - cannot write buffer for DAG
Setting DAG epoch #202 for GPU0 done
GPU 1, CUDA error 11 - cannot write buffer for DAG
Setting DAG epoch #202 for GPU2 done
GPU 3 failed
GPU 4 failed
GPU 1 failed
GPU 5 failed
ETH: 07/30/18-20:22:54 - New job from eth-us-west1.nanopool.org:9999
ETH - Total Speed: 53.086 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 26.546 Mh/s, GPU1 0.000 Mh/s, GPU2 26.540 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
GPU0 t=65C fan=8%, GPU1 t=52C fan=0%, GPU2 t=65C fan=9%, GPU3 t=52C fan=0%, GPU4 t=54C fan=0%, GPU5 t=56C fan=0%
WATCHDOG: GPU error, you need to restart miner
Quit, please wait...
Restarting OK, exit...

[backbonemanic]

Looking for some help with my rig. Have been using claymore for a year no issues until now, but yesterday i did a bios update to fix the issue of 5 of 6 GPUs being discovered in device manager and it worked but now claymore crashes almost straight after opening with no error message. This is my log:

19:26:12:713   1c04   args: -epool eth-sg.dwarfpool.com:8008 -ewal 0xB637EEa7E4F0aB00c342AF86529b191d9FAc3075 -mode 1 -epsw x
19:26:12:713   1c04  
19:26:12:713   1c04   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
19:26:12:713   1c04   º                Claymore's Dual GPU Miner - v11.9               º
19:26:12:713   1c04   º              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             º
19:26:12:713   1c04   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
19:26:12:713   1c04  
19:26:12:713   1c04   b597
19:26:12:937   1c04   ETH: 1 pool is specified
19:26:12:937   1c04   Main Ethereum pool is eth-sg.dwarfpool.com:8008

- taken all but one gpu out
- changed risers
- increased virtual mem
- excluded in windows defender and firewall
- uninstalled nvidia and amd drivers with ddu and reinstalled with latest version
- added -mode 1
- pci is all gen1

Rig:
Celeron G3930
Asrock Gaming k4 mobo
4gb ram
1500watt psu
3x 1060
1x 1070
1x 570
1x 580

Dont know what to try next so any ideas are appreciated cheers!

Edit: Tried phoenix miner does pretty much the same thing heres the log:
2018.07.29:15:29:59.924: main Phoenix Miner 3.0c Windows/msvc - Release
2018.07.29:15:29:59.924: main Cmd line: -pool eth-au.dwarfpool.com:8008 -wal 0xB637EEa7E4F0aB00c342AF86529b191d9FAc3075 -pass x

For some reason sometimes I change drivers or use a different miner than go back to using claymore it crashes and the only way I found to fix it is to reinstall Windows I think claymore miners screw with win registry and drivers

Well you were right a reinstall of windows fixed is thanks so much mate!

[backbonemanic]

Can anyone help me with this???

╔════════════════════════════════════════════════════════════════╗
║                Claymore's Dual GPU Miner - v11.9               ║
║              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             ║
╚════════════════════════════════════════════════════════════════╝

ETH: 7 pools are specified
Main Ethereum pool is eth-us-west1.nanopool.org:9999
AMD OpenCL platform not found
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool, "x" to select GPU
CUDA initializing...

NVIDIA Cards available: 6
CUDA Driver Version/Runtime Version: 9.2/8.0
GPU #0: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 7:0:0)
GPU #1: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 9:0:0)
GPU #2: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 11:0:0)
GPU #3: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 12:0:0)
GPU #4: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 13:0:0)
GPU #5: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 14:0:0)
Total cards: 6

You can use "+" and "-" keys to achieve best ETH speed, see "FINE TUNING" section in Readme for details.

ETH: Stratum - connecting to 'eth-us-west1.nanopool.org' <45.32.71.82> port 9999 (unsecure)
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
GPU0 t=50C fan=0%, GPU1 t=49C fan=0%, GPU2 t=51C fan=0%, GPU3 t=49C fan=0%, GPU4 t=51C fan=0%, GPU5 t=54C fan=0%
ETH: eth-proxy stratum mode
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

ETH: Stratum - Connected (eth-us-west1.nanopool.org:9999) (unsecure)
ETH: Authorized
Setting DAG epoch #202...
ETH: 07/30/18-20:22:26 - New job from eth-us-west1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
Setting DAG epoch #202 for GPU2
Setting DAG epoch #202 for GPU1
Setting DAG epoch #202 for GPU0
Setting DAG epoch #202 for GPU4
Setting DAG epoch #202 for GPU3
Setting DAG epoch #202 for GPU5
Create GPU buffer for GPU2
Create GPU buffer for GPU4
Create GPU buffer for GPU5
Create GPU buffer for GPU0
Create GPU buffer for GPU3
Create GPU buffer for GPU1
CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
GPU 3 failed
Setting DAG epoch #202 for GPU3
GPU 4 failed
GPU2 DAG creation time - 7982 ms
GPU 5 failed
Setting DAG epoch #202 for GPU5
Setting DAG epoch #202 for GPU4
GPU0 DAG creation time - 7993 ms
GPU 3, CUDA error 11 - cannot write buffer for DAG
GPU 1 failed
Setting DAG epoch #202 for GPU1
GPU 4, CUDA error 11 - cannot write buffer for DAG
GPU 5, CUDA error 11 - cannot write buffer for DAG
Setting DAG epoch #202 for GPU0 done
GPU 1, CUDA error 11 - cannot write buffer for DAG
Setting DAG epoch #202 for GPU2 done
GPU 3 failed
GPU 4 failed
GPU 1 failed
GPU 5 failed
ETH: 07/30/18-20:22:54 - New job from eth-us-west1.nanopool.org:9999
ETH - Total Speed: 53.086 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 26.546 Mh/s, GPU1 0.000 Mh/s, GPU2 26.540 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
GPU0 t=65C fan=8%, GPU1 t=52C fan=0%, GPU2 t=65C fan=9%, GPU3 t=52C fan=0%, GPU4 t=54C fan=0%, GPU5 t=56C fan=0%
WATCHDOG: GPU error, you need to restart miner
Quit, please wait...
Restarting OK, exit...

Try increasing the pagefile size iv got mine on 25gb anything below results in whats happened to you.

[drawer]

Try this faster and lower devfee .85 percent

https://bitcointalk.org/index.php?topic=2647654.0  

....Only windows..... Any miner linux alternative to claymore ?? Time to show claymore that this is ridiculous to make so much money from DEV FEE and make so shity 11.x wersion of claymore.

[smithjones223]

Can anyone help me with this???

╔════════════════════════════════════════════════════════════════╗
║                Claymore's Dual GPU Miner - v11.9               ║
║              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             ║
╚════════════════════════════════════════════════════════════════╝

ETH: 7 pools are specified
Main Ethereum pool is eth-us-west1.nanopool.org:9999
AMD OpenCL platform not found
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool, "x" to select GPU
CUDA initializing...

NVIDIA Cards available: 6
CUDA Driver Version/Runtime Version: 9.2/8.0
GPU #0: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 7:0:0)
GPU #1: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 9:0:0)
GPU #2: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 11:0:0)
GPU #3: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 12:0:0)
GPU #4: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 13:0:0)
GPU #5: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 14:0:0)
Total cards: 6

You can use "+" and "-" keys to achieve best ETH speed, see "FINE TUNING" section in Readme for details.

ETH: Stratum - connecting to 'eth-us-west1.nanopool.org' <45.32.71.82> port 9999 (unsecure)
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
GPU0 t=50C fan=0%, GPU1 t=49C fan=0%, GPU2 t=51C fan=0%, GPU3 t=49C fan=0%, GPU4 t=51C fan=0%, GPU5 t=54C fan=0%
ETH: eth-proxy stratum mode
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

ETH: Stratum - Connected (eth-us-west1.nanopool.org:9999) (unsecure)
ETH: Authorized
Setting DAG epoch #202...
ETH: 07/30/18-20:22:26 - New job from eth-us-west1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
Setting DAG epoch #202 for GPU2
Setting DAG epoch #202 for GPU1
Setting DAG epoch #202 for GPU0
Setting DAG epoch #202 for GPU4
Setting DAG epoch #202 for GPU3
Setting DAG epoch #202 for GPU5
Create GPU buffer for GPU2
Create GPU buffer for GPU4
Create GPU buffer for GPU5
Create GPU buffer for GPU0
Create GPU buffer for GPU3
Create GPU buffer for GPU1
CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
GPU 3 failed
Setting DAG epoch #202 for GPU3
GPU 4 failed
GPU2 DAG creation time - 7982 ms
GPU 5 failed
Setting DAG epoch #202 for GPU5
Setting DAG epoch #202 for GPU4
GPU0 DAG creation time - 7993 ms
GPU 3, CUDA error 11 - cannot write buffer for DAG
GPU 1 failed
Setting DAG epoch #202 for GPU1
GPU 4, CUDA error 11 - cannot write buffer for DAG
GPU 5, CUDA error 11 - cannot write buffer for DAG
Setting DAG epoch #202 for GPU0 done
GPU 1, CUDA error 11 - cannot write buffer for DAG
Setting DAG epoch #202 for GPU2 done
GPU 3 failed
GPU 4 failed
GPU 1 failed
GPU 5 failed
ETH: 07/30/18-20:22:54 - New job from eth-us-west1.nanopool.org:9999
ETH - Total Speed: 53.086 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 26.546 Mh/s, GPU1 0.000 Mh/s, GPU2 26.540 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
GPU0 t=65C fan=8%, GPU1 t=52C fan=0%, GPU2 t=65C fan=9%, GPU3 t=52C fan=0%, GPU4 t=54C fan=0%, GPU5 t=56C fan=0%
WATCHDOG: GPU error, you need to restart miner
Quit, please wait...
Restarting OK, exit...

Try increasing the pagefile size iv got mine on 25gb anything below results in whats happened to you.

THAT DID IT!!!   THANK YOU!!!!!!

[dollos]

Hi Claymore

could you help with an issue i am having with voltage control

1. when i choose -cvddc of under 800 then the software uses the -mvddc value as the core voltage? is this a bug or something else? (amd cards)

thanks

[tg88]

A very weird thing is happening with my RX 480 8GB. Overclocking memory gives me this:

Setting DAG epoch #201 for GPU0
Create GPU buffer for GPU0

And then reporting continuously 0.000 Mh/s. Any alteration to -mclock other than the value 2000, which is what the default clock is set to, will cause 0.000 Mh/s.

I have 5 other RX 580 cards running just fine on the same rig. Ample amount of virtual memory. I don't use any software. I use Claymore to apply overclocks. When I set the memory to 2000 it runs at 29.6 Mh/s without problem which fine but it has samsung memory and I'd like to try see what it can do. BIOS is unchanged except for memory straps.

what was the specified value in  -mvddc ?

[Call_Me_Bambi]

A very weird thing is happening with my RX 480 8GB. Overclocking memory gives me this:

Setting DAG epoch #201 for GPU0
Create GPU buffer for GPU0

And then reporting continuously 0.000 Mh/s. Any alteration to -mclock other than the value 2000, which is what the default clock is set to, will cause 0.000 Mh/s.

I have 5 other RX 580 cards running just fine on the same rig. Ample amount of virtual memory. I don't use any software. I use Claymore to apply overclocks. When I set the memory to 2000 it runs at 29.6 Mh/s without problem which fine but it has samsung memory and I'd like to try see what it can do. BIOS is unchanged except for memory straps.

Graphics cards of the same type may have all the same specs but they are slightly different (the silicon lottery) and it could be that this errant cad has reached its limits. Have a look at the memory errors with 'HWinfo' and see what errors you get as you increase the clock speed.

[AzzAz]

A very weird thing is happening with my RX 480 8GB. Overclocking memory gives me this:

Setting DAG epoch #201 for GPU0
Create GPU buffer for GPU0

And then reporting continuously 0.000 Mh/s. Any alteration to -mclock other than the value 2000, which is what the default clock is set to, will cause 0.000 Mh/s.

I have 5 other RX 580 cards running just fine on the same rig. Ample amount of virtual memory. I don't use any software. I use Claymore to apply overclocks. When I set the memory to 2000 it runs at 29.6 Mh/s without problem which fine but it has samsung memory and I'd like to try see what it can do. BIOS is unchanged except for memory straps.

what was the specified value in  -mvddc ?

I have core and memory set to 860. HWInfo 64 says core is running at 0.988 V though. Another weird thing is that if I put a number lower than 2000, it also messes it up. 0.000 Mh/s.

Just try with 930 or 900...

[tg88]

Just try with 930 or 900...

exactly, increase the -mvddc

[user0071]

Here's a new one for you:

Going back to Fall Creator Build 1709 worked perfectly. Finding this ISO was a bit difficult, but it's out there.

I DDU'd my GPUs, and then attempted to restart. I'm getting Error 55 on an Asus Z97-Pro (no memory detected)

I tried different sticks of ram, 1 by 1 in the appropriate slot...nothing. A new PSU...nothing. used the MEMOK! button which didn't do jack. I can't even boot into bios. Re-seated the CPU...nothing. The seller told me the mobo had 2 bent pins but it was working "fine" after I travelled 30 minutes, SO i just bought it. To his credit, it was working just fine. Is it possible that these bent pins suddenly screwed everything up after being fine for 3 weeks?