Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[keksik]

hello,

i would like to ask some questions:
- when i start to mine, how long it takes to start dev mining?
- when i start stop miner, does it reset counter for dev mining? for example im mining with another miner, then it starts with claymore, after couple hours, it switch back and then after couple hours again with claymore, so does it reset dev mining counter? or another example, im fine tunning and i left miner run for half hour or less, does the counter reset all the time?

thank you

[1714885459]

1714885459

[1714885459]

1714885459

[1714885459]

1714885459

[Altcoinlog]

AltCoinLog about Claymore's Dual Miner



Link to download the original version of the program, instructions for setting up and optimizing software. Basic commands and frequent beginner problems. Ready Bat files for mining.

The article is written in Russian

https://altcoinlog.com/claymore-s-dual-miner-nastroyka/

[RuMiner]

Hello, Mr @Claymore!
There's a new dual mining method described here
Zilminer based on original ethminer works with your dualminer, but it hangs up somitemes while switching miners.
Maybe is it possible to dual mine Zilliqa in dualminer 12.1?  

[keksik]

Hello, Mr @Claymore!
There's a new dual mining method described here
Zilminer based on original ethminer works with your dualminer, but it hangs up somitemes while switching miners.
Maybe is it possible to dual mine Zilliqa in dualminer 12.1?  

what i have seen it has same hash as in ETH, so my assumption is not possible to dual mine as both use same mem mining. it looks to me like mining ETH+ETC at once, you know... but i can be wrong of course, im not a pro.

[RuMiner]

what i have seen it has same hash as in ETH, so my assumption is not possible to dual mine as both use same mem mining. it looks to me like mining ETH+ETC at once, you know... but i can be wrong of course, im not a pro.

ZIL PoW window is just several minutes for about 2 hours. it could switch to ZIL mining like it acts with devfee

[MineStar]

It would be great if the miner would show shares accepted per GPU, something like this:
ETH: GPU0 15.149 Mh/s (20), GPU1 15.083 Mh/s (17), GPU2 15.046 Mh/s (24), GPU3 15.088 Mh/s (10)

[RuMiner]

It would be great if the miner would show shares accepted per GPU

press 's', it does already

[ManDoneKTM]

It would be great if the miner would show shares accepted per GPU

press 's', it does already

Hello guys , wich is the best combo to dual mine with this software ? i tried eth / etc + xvg but doesnt worth it ... another coin / alternative ? i dont pay electricity . 24 amd gpu available .

[Coldstar13]

Anyone get same problem like this please help me. My Claymore run afew min get BSOD then restart.
Claymore ver 12.0
Amd driver 18.6.1
I set core minimum 990, mem 1800, vcdcc 950, cvdcc 950

https://photos.app.[Suspicious link removed]/uwJe24QCi5qD5mcKA

[abhiseshakana]

Anyone get same problem like this please help me. My Claymore run afew min get BSOD then restart.
Claymore ver 12.0
Amd driver 18.6.1
I set core minimum 990, mem 1800, vcdcc 950, cvdcc 950

https://photos.app.[Suspicious link removed]/uwJe24QCi5qD5mcKA

What GPU do you use? and how many GPU did you installed?

I would suggest you should check the risers and try to mine with another mining software, also try to mine with each GPU individually.

There are several factors which can cause BSOD issues. It might be your virtual memory is too low, you should at least try to increase the page file.

[Coldstar13]

Anyone get same problem like this please help me. My Claymore run afew min get BSOD then restart.
Claymore ver 12.0
Amd driver 18.6.1
I set core minimum 990, mem 1800, vcdcc 950, cvdcc 950

https://photos.app.[Suspicious link removed]/uwJe24QCi5qD5mcKA

What GPU do you use? and how many GPU did you installed?

I would suggest you should check the risers and try to mine with another mining software, also try to mine with each GPU individually.

There are several factors which can cause BSOD issues. It might be your virtual memory is too low, you should at least try to increase the page file.

My Rig use Rx470 mining version
The BSOD show "Video TDR Failure (atikmpag.sys"). I duno which file should i download.
https://imgur.com/a/lRLnJNs#r2hLbjp

[vuli1]

install the latest drivers. use DDU to install old ones, than DL  new one.

[elmanager]

Hello, Mr @Claymore!
There's a new dual mining method described here
Zilminer based on original ethminer works with your dualminer, but it hangs up somitemes while switching miners.
Maybe is it possible to dual mine Zilliqa in dualminer 12.1?  

  That would be great!

[big_daddy]

Hello, Mr @Claymore!
There's a new dual mining method described here
Zilminer based on original ethminer works with your dualminer, but it hangs up somitemes while switching miners.
Maybe is it possible to dual mine Zilliqa in dualminer 12.1?  

  That would be great!

Implementing ZIL mining in Claymore dual will be great
Dear Claymore, I hope you will think about it
Tmx.

[elmanager]

Hello, Mr @Claymore!
There's a new dual mining method described here
Zilminer based on original ethminer works with your dualminer, but it hangs up somitemes while switching miners.
Maybe is it possible to dual mine Zilliqa in dualminer 12.1?  

what i have seen it has same hash as in ETH, so my assumption is not possible to dual mine as both use same mem mining. it looks to me like mining ETH+ETC at once, you know... but i can be wrong of course, im not a pro.

   He talks about the native ZIL which is not eth hash and basically it needs its operation mostly once per 2h for a some kind of a lottery which node gonna get the price. I already ran 17 nodes with a rig mining each. A friend set me up the smos dual eth and zil but it crash and reload itself every 2-3 hours.

https://imagebin.ca/v/4a38FMOrxTjw

[big_daddy]

  He talks about the native ZIL which is not eth hash and basically it needs its operation mostly once per 2h for a some kind of a lottery which node gonna get the price. I already ran 17 nodes with a rig mining each. A friend set me up the smos dual eth and zil but it crash and reload itself every 2-3 hours.

In theory, can be implemented in a script inside of Clay's miner
I'm running a "custom" dual with ZIL, I have 3 bat files configured and it works

So, if I can run it like an amateur, Claymore, with his programming skills, I'm sure can give us a more stable solution

[elmanager]

  He talks about the native ZIL which is not eth hash and basically it needs its operation mostly once per 2h for a some kind of a lottery which node gonna get the price. I already ran 17 nodes with a rig mining each. A friend set me up the smos dual eth and zil but it crash and reload itself every 2-3 hours.

In theory, can be implemented in a script inside of Clay's miner
I'm running a "custom" dual with ZIL, I have 3 bat files configured and it works

So, if I can run it like an amateur, Claymore, with his programming skills, I'm sure can give us a more stable solution

   Do you mean dual mining ETH+ZIL ?

[big_daddy]

   Do you mean dual mining ETH+ZIL ?

Yes, even triple mining, ETHash coin + some of the dual, and start pow / stop pow on ZIL mining epoh
I’m not a programmer, but I’m sure it can be done

[elmanager]

   Do you mean dual mining ETH+ZIL ?

Yes, even triple mining, ETHash coin + some of the dual, and start pow / stop pow on ZIL mining epoh
I’m not a programmer, but I’m sure it can be done

    Yes it works like that and its good for the r9280x on wake on lan, so finally it mines only ~24min a day. My issues are with the rx where they are mining eth+zil with smos, I got my own 17 nodes and 4-5 machines are crashing every 2-3 hours. The bad is my average eth hashrate drops and I could miss a zill pot. I got 15 zil reward(30+zil each) per 24h from the 17 nodes and 6 working rigs and I think they'll be much more if it works properly. Im not programmer too 

[tryshop]

Apparently, it will soon move towards the ProgPow algorithm. I would like to see something like that.