tg88
Legendary
Offline
Activity: 2492
Merit: 1489
Payment Gateway Allows Recurring Payments
|
|
September 06, 2018, 10:25:59 AM |
|
hi, i have 3 rigs with 6 cards on each. asrock h81 btc pro with 6x rx580's bios modded and are all running at 31mh/s per card. i noticed tonight i have 1 rig with all 6 cards giving just 16 mh/s each. i restarted the rig but it's still the same. any ideas what that could be??
Apply this tool: https://bitcointalk.org/index.php?topic=2815803.0
|
|
|
|
crypper
Member
Offline
Activity: 239
Merit: 12
|
|
September 06, 2018, 11:43:36 AM |
|
hi, i have 3 rigs with 6 cards on each. asrock h81 btc pro with 6x rx580's bios modded and are all running at 31mh/s per card. i noticed tonight i have 1 rig with all 6 cards giving just 16 mh/s each. i restarted the rig but it's still the same. any ideas what that could be??
Apply this tool: https://bitcointalk.org/index.php?topic=2815803.0A tool? seriously? It's a single key to edit in registry: You are looking to set: "KMD_EnableInternalLargePage"=dword:00000002 in [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\000 x] where x = your gpu number, e.g. ...\0001, ...\0002, etc
|
|
|
|
Bojcha
|
|
September 06, 2018, 05:39:25 PM |
|
Still nothing from Claymore and at the same time Phoenix team stopped replying I'm sensing something is going on?
You have no idea. But will be known soon or later!
|
|
|
|
Raja_MBZ
Legendary
Offline
Activity: 1862
Merit: 1505
|
|
September 06, 2018, 06:31:10 PM |
|
https://bitsonline.com/ether-2-eth-block-reward/Devs agreed on 2 ethers per block reward instead of 3 as it is now. This will happen with the coming fork in October together with a delay of the difficulty bomb by a year. Last November happened something similar, if I recall correctly. Then the reduced time for a block compensated the miners, so we got the same profit at the end. I hope it will be the same situation this October, or else the mining will end for those with expensive electricity. Prepare to see a big GPU sell-off. I'm now going to turn into a gamer. Is there any high-end game that requires 12 high-end GPU's at once and works with only 2 GB RAM + Pentium processor? LOL A couple days ago I was laughing on this post. But here comes the day when mining is no longer profitable for me: doesn't cover my electricity bill. RX 480, 580, GTX 1070 - all now scrap metal. Anyone wants to buy? Hmmm maybe hodl the GPUs for a little bit of time? Things can turn around in a month.
|
|
|
|
ivanm850
Newbie
Offline
Activity: 1
Merit: 0
|
|
September 07, 2018, 01:51:07 PM |
|
I ask for help. Previously, there was no such problem. Mining ELLA today became a problem for my GTX1050 2GB. Why do I get a DAG error? foto https://prnt.sc/krpqcx
|
|
|
|
Ursul0
|
|
September 07, 2018, 02:33:12 PM |
|
hi, i have 3 rigs with 6 cards on each. asrock h81 btc pro with 6x rx580's bios modded and are all running at 31mh/s per card. i noticed tonight i have 1 rig with all 6 cards giving just 16 mh/s each. i restarted the rig but it's still the same. any ideas what that could be??
Apply this tool: https://bitcointalk.org/index.php?topic=2815803.0A tool? seriously? It's a single key to edit in registry: You are looking to set: "KMD_EnableInternalLargePage"=dword:00000002 in [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\000 x] where x = your gpu number, e.g. ...\0001, ...\0002, etc Yes. this would enable compute mode in amd driver, first better check your gpus location in regedit and ajdust
|
|
|
|
crypper
Member
Offline
Activity: 239
Merit: 12
|
|
September 07, 2018, 03:23:44 PM |
|
hi, i have 3 rigs with 6 cards on each. asrock h81 btc pro with 6x rx580's bios modded and are all running at 31mh/s per card. i noticed tonight i have 1 rig with all 6 cards giving just 16 mh/s each. i restarted the rig but it's still the same. any ideas what that could be??
Apply this tool: https://bitcointalk.org/index.php?topic=2815803.0A tool? seriously? It's a single key to edit in registry: You are looking to set: "KMD_EnableInternalLargePage"=dword:00000002 in [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\000 x] where x = your gpu number, e.g. ...\0001, ...\0002, etc Yes. this would enable compute mode in amd driver, first better check your gpus location in regedit and ajdust Sure, it's simple if you have a mixed rig: in the same folder (e.g., ...\0001) check for DriverDesc key: it will be either NVidia or Radeon. Also remember one of the folders will belong to integrated graphics.
|
|
|
|
Call_Me_Bambi
|
|
September 07, 2018, 03:48:44 PM |
|
I ask for help. Previously, there was no such problem. Mining ELLA today became a problem for my GTX1050 2GB. Why do I get a DAG error? foto The current DAG size for ELLA is 1.58GB so your card should still be able to mine ELLA https://crypt0.zone/dag-file-size/ELLA/2229636. Some of the GPU memory is taken up by other resources (can't remember what) so you would need a bit more than 1.58GB for mining, but I don't think it would be as much as 0.43GB. Try increasing your swap file size this might help. To check your sytem, do a test mine on coin with a DAG of less than 2GB and see it that works, I think some of the Cryptonight variants can still do that. ELLA has a Bitcointalk thread, you may get a better answer there, https://bitcointalk.org/index.php?topic=2168042.1800
|
|
|
|
new24core
Member
Offline
Activity: 413
Merit: 17
|
|
September 08, 2018, 07:53:49 AM |
|
I am struggling to get my email included in the connection settings for ethermine.
Can someone please provide a working sample ?
Thanks in advance!
|
|
|
|
realcryptomines
Newbie
Offline
Activity: 51
Merit: 0
|
|
September 08, 2018, 08:03:54 PM |
|
I am struggling to get my email included in the connection settings for ethermine.
Can someone please provide a working sample ?
Thanks in advance!
you add your email on the website under the settings tab
|
|
|
|
adaseb
Legendary
Offline
Activity: 3878
Merit: 1733
|
|
September 08, 2018, 08:57:57 PM |
|
I am struggling to get my email included in the connection settings for ethermine.
Can someone please provide a working sample ?
Thanks in advance!
I don't know how it is now but in the past the ethermine dead miner alert email always arrived late. If you want something more instant just use the Claymore manager and add your email there. You will need some POP3 mail server and its a pain to figure out at first but its the best way to get alerts instantely if any of your rigs go down. However keep in mind it won't work if at your location your internet is down, if its down then there is not much you can do either way. You can't mine without an internet connection anyways.
|
|
|
|
tg88
Legendary
Offline
Activity: 2492
Merit: 1489
Payment Gateway Allows Recurring Payments
|
|
September 08, 2018, 09:11:04 PM |
|
I am struggling to get my email included in the connection settings for ethermine.
Can someone please provide a working sample ?
Thanks in advance!
You can configure directly in the pool.
|
|
|
|
chanyewhau
Newbie
Offline
Activity: 7
Merit: 0
|
|
September 09, 2018, 09:29:51 AM |
|
Hi guys, my RX480 mining rig is having a problem here. 2 out of 6 GPUs hang after 5 mins of mining with Claymore miner, please refer to the screenshot below. The rig is powered by 2 750w psu. I’ve tried reseating the risers and lowering the OC, but the result is the same. Previosly the rig was running at a steady rate , after i relocated the rig, i have this problem. Any advise is appreciated. https://preview.ibb.co/ew35AU/6312_C615_F089_45_B7_BFFD_C04_DC9_D23410.jpg
|
|
|
|
Call_Me_Bambi
|
|
September 09, 2018, 12:26:45 PM |
|
Hi guys, my RX480 mining rig is having a problem here. 2 out of 6 GPUs hang after 5 mins of mining with Claymore miner, please refer to the screenshot below. The rig is powered by 2 750w psu. I’ve tried reseating the risers and lowering the OC, but the result is the same. Previosly the rig was running at a steady rate , after i relocated the rig, i have this problem. Any advise is appreciated. Two 750W power supplies should be enough to power your rig so we can, probably, rule out power problems (as a check use a power monitor on each supply - just to be sure). A couple of things you could try. Run the rig with only each of the 'faulty' cards individually to check if there is a problem with the cards - disconect every thing but the card under test. Strip the rig down completely (leave CPU place) and re-build it, it's the hardware equivalent of "Have you tried switching it of and on again?", you never know what may have been knocked out of place during the move.
|
|
|
|
chanyewhau
Newbie
Offline
Activity: 7
Merit: 0
|
|
September 09, 2018, 01:58:16 PM |
|
Hi guys, my RX480 mining rig is having a problem here. 2 out of 6 GPUs hang after 5 mins of mining with Claymore miner, please refer to the screenshot below. The rig is powered by 2 750w psu. I’ve tried reseating the risers and lowering the OC, but the result is the same. Previosly the rig was running at a steady rate , after i relocated the rig, i have this problem. Any advise is appreciated. https://preview.ibb.co/ew35AU/6312_C615_F089_45_B7_BFFD_C04_DC9_D23410.jpgTwo 750W power supplies should be enough to power your rig so we can, probably, rule out power problems (as a check use a power monitor on each supply - just to be sure). A couple of things you could try. Run the rig with only each of the 'faulty' cards individually to check if there is a problem with the cards - disconect every thing but the card under test. Strip the rig down completely (leave CPU place) and re-build it, it's the hardware equivalent of "Have you tried switching it of and on again?", you never know what may have been knocked out of place during the move. Thanks brother. I’ve temporarily remove the 2 “faulty” cards for now and will try your method in awhile. Will give an update soon.
|
|
|
|
AzzAz
Legendary
Offline
Activity: 1030
Merit: 1006
|
|
September 09, 2018, 07:09:43 PM |
|
Hi guys, my RX480 mining rig is having a problem here. 2 out of 6 GPUs hang after 5 mins of mining with Claymore miner, please refer to the screenshot below. The rig is powered by 2 750w psu.
I’ve tried reseating the risers and lowering the OC, but the result is the same. Previosly the rig was running at a steady rate , after i relocated the rig, i have this problem. Any advise is appreciated.
Two 750W power supplies should be enough to power your rig so we can, probably, rule out power problems (as a check use a power monitor on each supply - just to be sure). A couple of things you could try. Run the rig with only each of the 'faulty' cards individually to check if there is a problem with the cards - disconect every thing but the card under test. Strip the rig down completely (leave CPU place) and re-build it, it's the hardware equivalent of "Have you tried switching it of and on again?", you never know what may have been knocked out of place during the move. Thanks brother. I’ve temporarily remove the 2 “faulty” cards for now and will try your method in awhile. Will give an update soon. 2 possibilities: - @ new place 2 cards are overheating - connection is now worse for those 2 cards/risers/slots
|
|
|
|
Raja_MBZ
Legendary
Offline
Activity: 1862
Merit: 1505
|
|
September 09, 2018, 08:59:31 PM |
|
Hi guys, my RX480 mining rig is having a problem here. 2 out of 6 GPUs hang after 5 mins of mining with Claymore miner, please refer to the screenshot below. The rig is powered by 2 750w psu. I’ve tried reseating the risers and lowering the OC, but the result is the same. Previosly the rig was running at a steady rate , after i relocated the rig, i have this problem. Any advise is appreciated. Two 750W power supplies should be enough to power your rig so we can, probably, rule out power problems (as a check use a power monitor on each supply - just to be sure). A couple of things you could try. Run the rig with only each of the 'faulty' cards individually to check if there is a problem with the cards - disconect every thing but the card under test. Strip the rig down completely (leave CPU place) and re-build it, it's the hardware equivalent of "Have you tried switching it of and on again?", you never know what may have been knocked out of place during the move. Thanks brother. I’ve temporarily remove the 2 “faulty” cards for now and will try your method in awhile. Will give an update soon. Are you powering up both the cards from same PSU?
|
|
|
|
dhmctrader
Newbie
Offline
Activity: 49
Merit: 0
|
|
September 10, 2018, 01:53:47 AM |
|
I’ve tried reseating the risers and lowering the OC, but the result is the same.
How aggressive is your UV? I recently had a card that had been running for a good while all of a sudden need a +10 mV increase to both to keep from hanging after a while. I was pretty aggressive with the undervolting. This was on a RX480.
|
|
|
|
deadsix
|
|
September 10, 2018, 05:51:49 AM |
|
|
|
|
|
Call_Me_Bambi
|
|
September 10, 2018, 05:09:29 PM |
|
Hi guys, my RX480 mining rig is having a problem here. 2 out of 6 GPUs hang after 5 mins of mining with Claymore miner, please refer to the screenshot below. The rig is powered by 2 750w psu.
I’ve tried reseating the risers and lowering the OC, but the result is the same. Previosly the rig was running at a steady rate , after i relocated the rig, i have this problem. Any advise is appreciated.
Two 750W power supplies should be enough to power your rig so we can, probably, rule out power problems (as a check use a power monitor on each supply - just to be sure). A couple of things you could try. Run the rig with only each of the 'faulty' cards individually to check if there is a problem with the cards - disconect every thing but the card under test. Strip the rig down completely (leave CPU place) and re-build it, it's the hardware equivalent of "Have you tried switching it of and on again?", you never know what may have been knocked out of place during the move. Thanks brother. I’ve temporarily remove the 2 “faulty” cards for now and will try your method in awhile. Will give an update soon. 2 possibilities: - @ new place 2 cards are overheating - connection is now worse for those 2 cards/risers/slots Yes, overheating was one of the things I thought of, but screenshot looks good. The screenshot shows the rig running for only 2 minutes with temps looking OK. Would be a good idea for OP to check temp.
|
|
|
|
|