NathanB
Newbie
Offline
Activity: 12
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 15, 2015, 12:05:25 PM |
|
--au3-freq 250 --au3-volt 800
try options
Tried, nothing has changed. I may be incorrectly configured cgminer? ./configure --enable-icarus i do, always worked for me sudo apt-get update sudo apt-get install libusb-1.0-0-dev libusb-1.0-0 libcurl4-openssl-dev libncurses5-dev libudev-dev wget http://ck.kolivas.org/apps/cgminer/4.9/cgminer-4.9.0.tar.bz2tar xvf cgminer-4.9.0.tar.bz2 cd cgminer-4.9.0 ./configure --enable-icarus make cd cgminer-4.9.0 ./cgminer -o pool:port -u userid -p password --au3-freq 250 --au3-volt 800
|
|
|
|
Alien77
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 15, 2015, 12:12:47 PM |
|
--au3-freq 250 --au3-volt 800
try options
Tried, nothing has changed. I may be incorrectly configured cgminer? ./configure --enable-icarus i do, always worked for me sudo apt-get update sudo apt-get install libusb-1.0-0-dev libusb-1.0-0 libcurl4-openssl-dev libncurses5-dev libudev-dev wget http://ck.kolivas.org/apps/cgminer/4.9/cgminer-4.9.0.tar.bz2tar xvf cgminer-4.9.0.tar.bz2 cd cgminer-4.9.0 ./configure --enable-icarus make cd cgminer-4.9.0 ./cgminer -o pool:port -u userid -p password --au3-freq 250 --au3-volt 800 I erased the cgminer.conf and now u3 is work correctly. Thank you very much.
|
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 15, 2015, 03:45:02 PM |
|
--au3-freq 250 --au3-volt 800
try options
Tried, nothing has changed. I may be incorrectly configured cgminer? ./configure --enable-icarus i do, always worked for me sudo apt-get update sudo apt-get install libusb-1.0-0-dev libusb-1.0-0 libcurl4-openssl-dev libncurses5-dev libudev-dev wget http://ck.kolivas.org/apps/cgminer/4.9/cgminer-4.9.0.tar.bz2tar xvf cgminer-4.9.0.tar.bz2 cd cgminer-4.9.0 ./configure --enable-icarus make cd cgminer-4.9.0 ./cgminer -o pool:port -u userid -p password --au3-freq 250 --au3-volt 800 I erased the cgminer.conf and now u3 is work correctly. Thank you very much. You will melt the factory psu with those settings, be sure to use an adequate psu.
|
|
|
|
NathanB
Newbie
Offline
Activity: 12
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 15, 2015, 03:54:41 PM |
|
--au3-freq 250 --au3-volt 800
try options
Tried, nothing has changed. I may be incorrectly configured cgminer? ./configure --enable-icarus i do, always worked for me sudo apt-get update sudo apt-get install libusb-1.0-0-dev libusb-1.0-0 libcurl4-openssl-dev libncurses5-dev libudev-dev wget http://ck.kolivas.org/apps/cgminer/4.9/cgminer-4.9.0.tar.bz2tar xvf cgminer-4.9.0.tar.bz2 cd cgminer-4.9.0 ./configure --enable-icarus make cd cgminer-4.9.0 ./cgminer -o pool:port -u userid -p password --au3-freq 250 --au3-volt 800 I erased the cgminer.conf and now u3 is work correctly. Thank you very much. You will melt the factory psu with those settings, be sure to use an adequate psu. 2 things always do, replace psu and usb cable. I forget sometimes not everyone does that. sorry
|
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 15, 2015, 04:02:05 PM |
|
2 things always do, replace psu and usb cable. I forget sometimes not everyone does that. sorry
Oh yea, I forgot about the (crap) usb cable they ship with. 2 things I always remind people of with the U3, replace psu and usb cable. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) I also tell people who haven't bought one yet to not bother, they are generally crap.
|
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 19, 2015, 09:09:50 PM |
|
Please don't read this as "are we there yet?", but I was wondering if there is an ETA for the S2 and S3 cgminer updates? Even if it's months out, I was just curious. Thanks in advance.
|
|
|
|
Cheffe
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2015, 05:18:15 PM |
|
I downloaded cgminer-4.9.1.windows.zip from http://kolivas.org/apps/cgminer/ but can someone tell me how to use it proper? I have put my pool in the conf like "url" : "url1:8332", "user" : "user1", "pass" : "pass1" but i dont see my GPU when i open with cgminer -n Kind Regards
|
Partner & Investoren für das bekannt machen von Bitcoins (auch in der realen Welt mit einzigartigem Bitcoin-Zahlungssystem) gesucht. Einfach per PN melden
|
|
|
os2sam
Legendary
Offline
Activity: 3582
Merit: 1094
Think for yourself
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2015, 05:48:45 PM Last edit: May 20, 2015, 06:00:38 PM by os2sam |
|
I downloaded cgminer-4.9.1.windows.zip from http://kolivas.org/apps/cgminer/ but can someone tell me how to use it proper? I have put my pool in the conf like "url" : "url1:8332", "user" : "user1", "pass" : "pass1" but i dont see my GPU when i open with cgminer -n Kind Regards CG Miner doesn't support GPU's. You really don't want to mine bitcoins with GPU's anymore, anyway.
|
A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing on usenet and in e-mail?
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2015, 08:31:56 PM |
|
I downloaded cgminer-4.9.1.windows.zip from http://kolivas.org/apps/cgminer/ but can someone tell me how to use it proper? I have put my pool in the conf like "url" : "url1:8332", "user" : "user1", "pass" : "pass1" but i dont see my GPU when i open with cgminer -n Kind Regards CG Miner doesn't support GPU's. You really don't want to mine bitcoins with GPU's anymore, anyway. You can spend $20 on a USB stick miner that will run circles around a GPU, and it will work with cgminer.
|
|
|
|
kano
Legendary
Offline
Activity: 4578
Merit: 1851
Linux since 1997 RedHat 4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 21, 2015, 12:10:49 AM |
|
Please don't read this as "are we there yet?", but I was wondering if there is an ETA for the S2 and S3 cgminer updates? Even if it's months out, I was just curious. Thanks in advance.
S2 keeps being 'almost there' then I find another problem with it ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) It would seem that the last S2 firmware bitmain released was a screw-up for the S2 since it was changed to suit the S4. Not sure if anyone else noticed that or had issues with it I didn't touch the S2 back the end of last year - I was working on setting up/running the pool so I've no idea if anyone else had problems. Anyway, S2 will be done soon (hopefully the next few days)
|
|
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 26, 2015, 12:38:58 AM |
|
|
|
|
|
mewon
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 28, 2015, 03:35:35 AM Last edit: May 28, 2015, 04:16:22 AM by -ck |
|
Hello, how to install cgminer in openwrt? as easy as i install bfgminer, I can get from repo: src/gz bfgminer [suspicious link removed]
|
|
|
|
kano
Legendary
Offline
Activity: 4578
Merit: 1851
Linux since 1997 RedHat 4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 28, 2015, 05:00:01 AM |
|
Hello, how to install cgminer in openwrt? as easy as i install clone miner, I can get from repo: src/gz clone miner [suspicious link removed]
Not sure what you mean? The cgminer git etc is listed on the first post of this thread.
|
|
|
|
Wh1teKn1ght
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 29, 2015, 04:05:43 AM |
|
I have a BFL SC 25GH miner and in 4.9.1 when cgminer starts it states that there were no USB devices detected. Yet, when I run 4.9.0, the miner is detected and works fine. Is this a known issue with 4.9.1 or is there something that I may be missing?
Thanks!
|
|
|
|
Evan
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 29, 2015, 05:03:09 PM |
|
I have a BFL SC 25GH miner and in 4.9.1 when cgminer starts it states that there were no USB devices detected. Yet, when I run 4.9.0, the miner is detected and works fine. Is this a known issue with 4.9.1 or is there something that I may be missing?
Thanks!
One might assume it was removed from the support list of devices at the time of the new compile, do you have the ability to complie your own binary?
|
I am poor, but i do work for Coin ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) 1PtHcavXoakgNkQfEQdvnvEksEY2NvwaLM
|
|
|
os2sam
Legendary
Offline
Activity: 3582
Merit: 1094
Think for yourself
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 29, 2015, 05:47:03 PM |
|
I have a BFL SC 25GH miner and in 4.9.1 when cgminer starts it states that there were no USB devices detected. Yet, when I run 4.9.0, the miner is detected and works fine. Is this a known issue with 4.9.1 or is there something that I may be missing?
Thanks!
One might assume it was removed from the support list of devices at the time of the new compile, do you have the ability to complie your own binary? Why would one assume that? - BFL SC asic support
|
A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing on usenet and in e-mail?
|
|
|
os2sam
Legendary
Offline
Activity: 3582
Merit: 1094
Think for yourself
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 29, 2015, 05:50:36 PM |
|
I have a BFL SC 25GH miner and in 4.9.1 when cgminer starts it states that there were no USB devices detected. Yet, when I run 4.9.0, the miner is detected and works fine. Is this a known issue with 4.9.1 or is there something that I may be missing?
Thanks!
Are you running Windoze or Linux? If Windoze search back in a few pages and find the new cgminer.exe for 4.9.1 and try it. Don't know if it will make a difference for you or not but that got my Monarchs working. Sam
|
A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing on usenet and in e-mail?
|
|
|
Sukuzo
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 30, 2015, 01:11:00 AM Last edit: May 30, 2015, 08:29:14 AM by Sukuzo |
|
Hello, I'm running cgminer 4.9.0 on a raspberry pi, and I've been having problems. Seems that the raspberry pi basically crashes after an hour or 2hours. I thought it was some memory issue or being overheating somehow, so I tried to have it rebooted every hour (but apparently is not working... I assume it's because it crashes before restarting). I read online somewhere that there could be a memory issue, but my logs didn't show anything relevant (sorry, I have no fancy logs to show off). I thought it was just my raspberry pi not having enough memory, so Today I actually received a new one, the Raspberry Pi 2 Quad Core... 1GB ram... and I did my setup as follows: sudo apt-get update && sudo apt-get install libusb-1.0-0-dev libusb-1.0-0 libcurl4-openssl-dev libncurses5-dev libudev-dev -y
wget http://ck.kolivas.org/apps/cgminer/4.9/cgminer-4.9.0.tar.bz2 tar xvf cgminer-4.9.0.tar.bz2
cd cgminer-4.9.0/
./configure --enable-icarus sudo make && sudo make install
cgminer --icarus-options 115200:1:1 -o stratum+tcp://useast.blackcoinpool.com:2222 -u me -p y
On my original setup I had cgminer 4.9.1, but seems that the result is the same... And I added cgminer to /etc/rc.local so it starts on every startup (as I was having it so many times I decided to automatize that), and then I tried to restart it every hour by adding '0 0 * * * /sbin/shutdown -r 5+' at the end of the file when you use `crontab -e`. I have no idea what can be causing it to crash/freeze, let me know any flags that I can use for better logs or maybe this version is not stable? PS: I'm using the Rockminer New R-Box (2 of them) PS2: It seems I have the same issue as this guy https://www.raspberrypi.org/forums/viewtopic.php?t=55370&p=421883 , except that I don't see nothing in my logs... Thank you
|
|
|
|
kano
Legendary
Offline
Activity: 4578
Merit: 1851
Linux since 1997 RedHat 4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 30, 2015, 12:52:16 PM |
|
A few things: Get the latest cgminer 4.9.1 not an older one My old RPi has run for literally years without problems - DrillBit and AMU Icarus USBs Try using Arch instead of raspbian: http://www.kano-kun.net/No idea if there are problems with the RBox code (I didn't implement the code running in there) but an RPi is too slow to run an RBox so it wont hash at optimal speed - especially not with 2 of them - RBox created crappy hardware using the Icarus interface that was not designed for much more than 5GHs - no idea why they would still be producing that hardware, we pointed it out about a year ago that it should be doing USB properly (I have a post about how it should be done here on the forum from a couple of years ago ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) ) Also, that looks like altcoin mining ... and that's not something we care about supporting since it is bad for bitcoin.
|
|
|
|
|