Bitcoin Forum
July 22, 2018, 11:16:36 AM *
News: Latest stable version of Bitcoin Core: 0.16.1  [Torrent]. (New!)
 
   Home   Help Search Donate Login Register  
Pages: « 1 ... 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 [750] 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 ... 847 »
  Print  
Author Topic: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.10.0  (Read 5756990 times)
This is a self-moderated topic. If you do not want to be moderated by the person who started this topic, create a new topic.
GrapeApe
Sr. Member
****
Offline Offline

Activity: 477
Merit: 250



View Profile
May 01, 2014, 07:17:02 PM
 #14981

Does CGMiner support SSL/TLS?

If not are there any plans to include it it in the future, if so does anyone think the pool operators will/should be supporting it given the recent round of attacks?
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
Dunkelheit667
Legendary
*
Offline Offline

Activity: 948
Merit: 1033


no degradation


View Profile
May 02, 2014, 01:56:20 AM
 #14982

I am mining using a Raspberry Pi with cgminer and it hangs after a little while or few hours.

I did read on some pages over the internet that this is due to a "memory paging issue". I don't know what this is and if or it's the correct reason.

Can someone help me with this issue?

PS: I am running Arch Linux on my RPi
Here you go: http://projectklondike.org/how-to-run#rpi-freeze

Make sure you're adding this option as described to the existing line, it should look like this:



Good luck!

And the machine keeps pushing time through the cogs, like paste into strings into paste again, and only the machine keeps using time to make time to make time.
And when the machine stops, time is an illusion that we created free will.
-ck
Moderator
Legendary
*
Offline Offline

Activity: 2590
Merit: 1113


Ruu \o/


View Profile WWW
May 02, 2014, 05:40:22 AM
 #14983

New release - version 4.3.2, 2nd May 2014


Human readable changelog:

- There's a workaround in this version to minimise the risk of the man-in-the-middle attack of redirecting you to a different pool you don't want to be hashing on. Stratum reconnect will only honour the request if the reconnect is to a server with the same domain name.
- Fix for some overflow errors on stats with massive hashrates/shares.
- Fix a major memory leak which mostly affected hashfast users.
- Fix for a failed connection after a redirection that would then never return.
- Devices with unique serial numbers of 4 or more characters will now be displayed by their serial number in the status bar.
- Support for new firmware for OneStringMiners that will identify themselves as OSM devices.
- Support for OSM debugging and LED modes.
- A1 driver updates.


Full changelog:

- Make reconnection messages more explanatory
- Fix accounting bug with nrolltime drivers
- upgrade some int to int64_t to avoid overflows in reporting
- Stratum client.reconnect require matching URL
- Fix memory leak in submit_noffset_nonce
- Clean up any work that may not have been used in the work scheduler
- Avoid unnecessary deref now that it's done within discard_work
- Clean work pointers after one way usage functions
- Avoid unnecessary total_work_inc in generating local work
- Cosmetic fixes
- Fix idle bug, when redirected client can't auth
- Rename spond temp rate to asics total rate
- Build fixes
- Set the unique id only for usb devices with serial strings longer than 4 chars
long
- Use usb serial strings as unique id if devices have them
- Discretely identify the onestring miners as OSM
- Add bxf debugging option and osm led modes
- A1: modularize board selector / add initial CCR support
- A1: cleanup tca9535 logging
- A1: fix and extend PLL parameters
- A1: clean up compile warnings
- A1: use real level in hexdump
- Add identification for onestring miner variants
- Avalon2: Parser the power good signal
- driver-avalon2: this functions used on detect, which don't have thr setup yet

Primary developer/maintainer for cgminer and ckpool/ckproxy.
ZERO FEE Pooled mining at ckpool.org 1% Fee Solo mining at solo.ckpool.org
-ck
Taugeran
Hero Member
*****
Offline Offline

Activity: 658
Merit: 500


CCNA: There i fixed the internet.


View Profile
May 02, 2014, 05:50:23 AM
 #14984

Does CGMiner support SSL/TLS?

If not are there any plans to include it it in the future, if so does anyone think the pool operators will/should be supporting it given the recent round of attacks?


btcguild & bfgminer are working on support for ssl/tls

Bitfury HW & Habañero : 1.625Th/s
tips/Donations: 1NoS89H3Mr6U5CmP4VwWzU2318JEMxHL1
Come join Coinbase
RusellPower
Newbie
*
Offline Offline

Activity: 7
Merit: 0


View Profile
May 02, 2014, 11:41:32 AM
 #14985

I am mining using a Raspberry Pi with cgminer and it hangs after a little while or few hours.

I did read on some pages over the internet that this is due to a "memory paging issue". I don't know what this is and if or it's the correct reason.

Can someone help me with this issue?

PS: I am running Arch Linux on my RPi
Here you go: http://projectklondike.org/how-to-run#rpi-freeze

Make sure you're adding this option as described to the existing line, it should look like this:

http://i.imgur.com/a4opFyb.png

Good luck!

Thank you! I will try it out...
ManeBjorn
Legendary
*
Offline Offline

Activity: 1246
Merit: 1003



View Profile
May 02, 2014, 02:33:42 PM
 #14986

Thanks for the OSM update.  I am going to dl and get using it now.
 Smiley

New release - version 4.3.2, 2nd May 2014


Human readable changelog:

- There's a workaround in this version to minimise the risk of the man-in-the-middle attack of redirecting you to a different pool you don't want to be hashing on. Stratum reconnect will only honour the request if the reconnect is to a server with the same domain name.
- Fix for some overflow errors on stats with massive hashrates/shares.
- Fix a major memory leak which mostly affected hashfast users.
- Fix for a failed connection after a redirection that would then never return.
- Devices with unique serial numbers of 4 or more characters will now be displayed by their serial number in the status bar.
- Support for new firmware for OneStringMiners that will identify themselves as OSM devices.
- Support for OSM debugging and LED modes.
- A1 driver updates.


Full changelog:

- Make reconnection messages more explanatory
- Fix accounting bug with nrolltime drivers
- upgrade some int to int64_t to avoid overflows in reporting
- Stratum client.reconnect require matching URL
- Fix memory leak in submit_noffset_nonce
- Clean up any work that may not have been used in the work scheduler
- Avoid unnecessary deref now that it's done within discard_work
- Clean work pointers after one way usage functions
- Avoid unnecessary total_work_inc in generating local work
- Cosmetic fixes
- Fix idle bug, when redirected client can't auth
- Rename spond temp rate to asics total rate
- Build fixes
- Set the unique id only for usb devices with serial strings longer than 4 chars
long
- Use usb serial strings as unique id if devices have them
- Discretely identify the onestring miners as OSM
- Add bxf debugging option and osm led modes
- A1: modularize board selector / add initial CCR support
- A1: cleanup tca9535 logging
- A1: fix and extend PLL parameters
- A1: clean up compile warnings
- A1: use real level in hexdump
- Add identification for onestring miner variants
- Avalon2: Parser the power good signal
- driver-avalon2: this functions used on detect, which don't have thr setup yet


-ck
Moderator
Legendary
*
Offline Offline

Activity: 2590
Merit: 1113


Ruu \o/


View Profile WWW
May 02, 2014, 02:38:54 PM
 #14987

Thanks for the OSM update.  I am going to dl and get using it now.
 Smiley
Be aware the OSM update is for firmware which is only for testing for now, so if you're using the stable firmware release by OneString it will still come up as MXF but work the same in every other way; it's just the cosmetic change of missing the name OSM.

Primary developer/maintainer for cgminer and ckpool/ckproxy.
ZERO FEE Pooled mining at ckpool.org 1% Fee Solo mining at solo.ckpool.org
-ck
Askit2
Hero Member
*****
Offline Offline

Activity: 986
Merit: 500


DIV - Your "Virtual Life" Secured and Decentralize


View Profile
May 02, 2014, 09:31:33 PM
 #14988

I am mining using a Raspberry Pi with cgminer and it hangs after a little while or few hours.

I did read on some pages over the internet that this is due to a "memory paging issue". I don't know what this is and if or it's the correct reason.

Can someone help me with this issue?

PS: I am running Arch Linux on my RPi
Here you go: http://projectklondike.org/how-to-run#rpi-freeze

Make sure you're adding this option as described to the existing line, it should look like this:



Good luck!

I am not absolutely sure that is a fix for ARCH Linux. The fix you posted is to fix a long standing Raspbian problem. Now I can't say it won't fix it. I can say that mine doesn't exhibit this behavior with ARCH.

Best of luck to the person with the problem and I hope they find a solution.

EDIT: If you are running out of memory try the newest version maybe a memory leak is causing you grief with the limited RAM.

          ▄▄
        ▄█▀▀█▄
      ▄█▀ ▄▄ ▀█▄
      ▀ ▄████▄ ▀
   ▄▀ ▄ ▀████▀ ▄ ▀▄
 ▄▀ ▄███▄ ▀▀ ▄███▄ ▀▄
█  ███████  ███████  █
 ▀▄ ▀███▀ ▄▄ ▀███▀ ▄▀

   ▀▄ ▀ ▄████▄ ▀ ▄▀
      ▄ ▀████▀ ▄
      ▀█▄ ▀▀ ▄█▀
        ▀█▄▄█▀
          ▀▀
███████████████████████████████████████████████████████████████████
██████▀▀▀▀▀▀▀▀▀▀▀██████████▀▀▀▀▀████▀▀▀▀▀█████▀▀▀▀█████▀▀▀▀▀███████
██████            ▀████████     ████     █████    █████     ███████
██████     ▄▄▄▄▄    ▀██████     █████    ████      ████    ████████
██████     ██████▄    █████     █████    ▀██▀  ▄▄  ▀██▀    ████████
██████     ███████    █████     ██████    ██   ██   ██    █████████
██████     ███████    █████     ██████    ██   ██   ██    █████████
██████     ███████    █████     ██████     █   ██   █     █████████
██████     █████▀    ██████     ███████       ████       ██████████
██████     ▀▀▀▀▀    ▄██████     ████████     ██████     ███████████
██████            ▄████████     ████████     ██████     ███████████
██████▄▄▄▄▄▄▄▄▄▄▄██████████▄▄▄▄▄█████████▄▄▄▄██████▄▄▄▄████████████
███████████████████████████████████████████████████████████████████
.DIWtoken.com.
▄██████████████████▄
███       ▀███████
███       █████████
███       █████████
███       █████████
███              ██
███   ▄▄▄▄▄▄▄▄   ███
███   ▄▄▄▄▄▄▄▄   ███
███              ███
███▄▄▄▄▄▄▄▄▄▄▄▄▄▄███
██████████████████▀

▄██████████████████▄
███████████▀ ███████
█████████▀   ███████
███████▀     ██▀ ███
███ ▀▀       █▄▄████
███          █▀▀▀▀██
███ ▄▄       ███████
██████▄     █▄ ▀███
█████████▄   ███▄███
███████████▄ ███████
▀██████████████████▀

▄██████████████████▄
████████████████████
███████████████▀▀ ██
█████████▀▀     ███
████▀▀     ▄█▀   ███
███▄    ▄██      ███
█████████▀      ▄██
█████████▄     ████
█████████████▄ ▄████
████████████████████
▀██████████████████▀
......SECURITY DECENTRALIZED...
ManeBjorn
Legendary
*
Offline Offline

Activity: 1246
Merit: 1003



View Profile
May 03, 2014, 02:37:54 AM
 #14989

Yes I have not updated the new firmware yet.  I have been keeping up with Ben about it.
I am going to try it in a few days though and give him some feedback.
Your update saved me having to compile it in.  I appreciate it greatly.  I am not good at that stuff anymore.


Thanks for the OSM update.  I am going to dl and get using it now.
 Smiley
Be aware the OSM update is for firmware which is only for testing for now, so if you're using the stable firmware release by OneString it will still come up as MXF but work the same in every other way; it's just the cosmetic change of missing the name OSM.

matagatoz
Newbie
*
Offline Offline

Activity: 8
Merit: 0



View Profile
May 03, 2014, 03:39:46 AM
 #14990

Hi, After updating to 4.3.2 , if you go Settings, then save, cgminer will just close ( no error )

im on Ubuntu 13.10 64x , runing cgminer with
Code:
su ./cgminer
Dunkelheit667
Legendary
*
Offline Offline

Activity: 948
Merit: 1033


no degradation


View Profile
May 03, 2014, 05:16:17 AM
 #14991

I am mining using a Raspberry Pi with cgminer and it hangs after a little while or few hours.

I did read on some pages over the internet that this is due to a "memory paging issue". I don't know what this is and if or it's the correct reason.

Can someone help me with this issue?

PS: I am running Arch Linux on my RPi
Here you go: http://projectklondike.org/how-to-run#rpi-freeze

Make sure you're adding this option as described to the existing line, it should look like this:



Good luck!

I am not absolutely sure that is a fix for ARCH Linux. The fix you posted is to fix a long standing Raspbian problem. Now I can't say it won't fix it. I can say that mine doesn't exhibit this behavior with ARCH.

Best of luck to the person with the problem and I hope they find a solution.

EDIT: If you are running out of memory try the newest version maybe a memory leak is causing you grief with the limited RAM.

Not 100% sure but Raspbian and Arch using the same Raspberry Firmware/Kernel as far as I understood. I've seen the same behavior on Arch (at least with 3.6.11 up to 3.10.?) and the hint above solved all issues with my 'freezing' Raspberry (in fact it's alive, but USB including the network port is gone). Most likely you'll never see the behavior as long as the number of connected USB devices is fairly low. With let's say 10 or 15+ you will notice issues sooner or later. At least from my experience.

Anyway, it's worth a try and of course the latest cgminer is always the best. Smiley

And the machine keeps pushing time through the cogs, like paste into strings into paste again, and only the machine keeps using time to make time to make time.
And when the machine stops, time is an illusion that we created free will.
RusellPower
Newbie
*
Offline Offline

Activity: 7
Merit: 0


View Profile
May 03, 2014, 09:43:31 AM
 #14992

Moved to Raspbian, applied the patch, waiting to see if it works...  Smiley
yelloyello
Full Member
***
Offline Offline

Activity: 196
Merit: 100


View Profile
May 03, 2014, 06:20:27 PM
 #14993

Nice this thread but......

I have 3 KNC Jupiters (april 2014) and I want to update cgminer.
I am familiar with putty.

But, how to upgrade the cgminer?  apt-get install does not work.

anyone ??
Buchi-88
Legendary
*
Online Online

Activity: 1680
Merit: 1028


ImmVRse | Disrupting the VR industry


View Profile
May 03, 2014, 06:25:34 PM
 #14994

New release - version 4.3.2, 2nd May 2014


Human readable changelog:

- There's a workaround in this version to minimise the risk of the man-in-the-middle attack of redirecting you to a different pool you don't want to be hashing on. Stratum reconnect will only honour the request if the reconnect is to a server with the same domain name.
- Fix for some overflow errors on stats with massive hashrates/shares.
- Fix a major memory leak which mostly affected hashfast users.
- Fix for a failed connection after a redirection that would then never return.
- Devices with unique serial numbers of 4 or more characters will now be displayed by their serial number in the status bar.
- Support for new firmware for OneStringMiners that will identify themselves as OSM devices.
- Support for OSM debugging and LED modes.
- A1 driver updates.


Full changelog:

- Make reconnection messages more explanatory
- Fix accounting bug with nrolltime drivers
- upgrade some int to int64_t to avoid overflows in reporting
- Stratum client.reconnect require matching URL
- Fix memory leak in submit_noffset_nonce
- Clean up any work that may not have been used in the work scheduler
- Avoid unnecessary deref now that it's done within discard_work
- Clean work pointers after one way usage functions
- Avoid unnecessary total_work_inc in generating local work
- Cosmetic fixes
- Fix idle bug, when redirected client can't auth
- Rename spond temp rate to asics total rate
- Build fixes
- Set the unique id only for usb devices with serial strings longer than 4 chars
long
- Use usb serial strings as unique id if devices have them
- Discretely identify the onestring miners as OSM
- Add bxf debugging option and osm led modes
- A1: modularize board selector / add initial CCR support
- A1: cleanup tca9535 logging
- A1: fix and extend PLL parameters
- A1: clean up compile warnings
- A1: use real level in hexdump
- Add identification for onestring miner variants
- Avalon2: Parser the power good signal
- driver-avalon2: this functions used on detect, which don't have thr setup yet


Hello, after the update i have follow problem:

Quote
USB management [P]ool management Settings [D]isplay options [Q]uit
 0: ANU 0       :                         | 23.36M / 1.488Gh/s WU:20.9/m
 1: ANU 1       :                         | 402.6M / 1.521Gh/s WU:20.2/m
--------------------------------------------------------------------------------
 [2014-05-03 20:21:46] ANU0: Comms error (werr=0 amt=0)
 [2014-05-03 20:22:05] ANU1: Comms error (werr=0 amt=0)
 [2014-05-03 20:22:21] ANU0: Comms error (werr=0 amt=0)
 [2014-05-03 20:22:33] Shutdown signal received.

Is this a Bug or I have a problem with my HUB?

greets


▄▄█████▄▄
▄█████████████▄
▄███████████████████▄
▄█████████████████████████▄
███████████████████████████████
█████████████████████████████████
███████████████████████████████
█████████████████████████████████
█████████████████████████████████
█████████████████████████████████
█████████████████████████████████
█████████████████████████████████
█████████████████████████████████
█████████████████████████████████
█████████████████████████████████
███████████████████████████████
▀█████████████████████████▀
▀███████████████████▀
▀█████████████▀
▀▀█████▀▀
 





████          ████  ███████████▄▄                                 
▀███▄        ▄███▀  █████████████▄                               
██    ▄███▄     ▄███▄      ▄███▄     ▄███▄   ████        ████            ▀████    ▄██████████▄     ▄██████████
██    ██ ██     ██ ██      ██ ██     ██ ██    ████      ████             ▄████   ██▀        ▀██   ██▀         
██   ██   ██   ██   ██    ██   ██   ██   ██   ▀███▄    ▄███▀    █████████████▀   ▀██▄▄▄▄▄▄▄▄▄    ███▄▄▄▄▄▄▄▄▄
██   ██   ██   ██   ██    ██   ██   ██   ██    ████    ████     ███████████▀▀      ▀▀▀▀▀▀▀▀▀██▄  ███▀▀▀▀▀▀▀▀▀
██  ██     ██ ██     ██  ██     ██ ██     ██    ████  ████      ████   ████      ██▄        ▄██   ██▄         
██  ██     ▀███▀     ██  ██     ▀███▀     ██    ▀███▄▄███▀      ████    ████      ▀██████████▀     ▀██████████
████████       ████     ████                                 
██████        ████      ████                                 
 
   
 
WHITEPAPER    ▀▀▀▀▀▀▀▀▀▀▀
APPLY FOR CROWDSALE
▀▀▀▀▀▀▀▀▀▀▀    BITCOINTALK
 


















 
Proud Sponsor of
Blockchain 360 at
London Tech Week
  ◢  FACEBOOK
◢  TWITTER
◢  TELEGRAM
◢  MEDIUM
kano
Legendary
*
Offline Offline

Activity: 2520
Merit: 1045


Linux since 1997 RedHat 4


View Profile
May 04, 2014, 01:38:34 AM
 #14995

...
Hello, after the update i have follow problem:

Quote
USB management [P]ool management Settings [D]isplay options [Q]uit
 0: ANU 0       :                         | 23.36M / 1.488Gh/s WU:20.9/m
 1: ANU 1       :                         | 402.6M / 1.521Gh/s WU:20.2/m
--------------------------------------------------------------------------------
 [2014-05-03 20:21:46] ANU0: Comms error (werr=0 amt=0)
 [2014-05-03 20:22:05] ANU1: Comms error (werr=0 amt=0)
 [2014-05-03 20:22:21] ANU0: Comms error (werr=0 amt=0)
 [2014-05-03 20:22:33] Shutdown signal received.

Is this a Bug or I have a problem with my HUB?

greets
... smaller quotes thanks ...

Anyway, there are no changes to the Icarus driver.

Probable causes are:
1) Overheating - although it's getting colder here, it's getting hotter in the northern hemisphere - these things have no temperature sensors - they are stupid
2) Power, as usual, if your hub isn't providing enough or it's plug pack is now over heating. 2000mA seems to be needed for 2xANU
3) General hardware problems as you suggested

Pool: https://kano.is Here on Bitcointalk: Forum BTC: 1KanoPb8cKYqNrswjaA8cRDk4FAS9eDMLU
FreeNode IRC: irc.freenode.net channel #kano.is Majority developer of the ckpool code
Help keep Bitcoin secure by mining on pools with full block verification on all blocks - and NO empty blocks!
kano
Legendary
*
Offline Offline

Activity: 2520
Merit: 1045


Linux since 1997 RedHat 4


View Profile
May 04, 2014, 02:25:23 AM
 #14996

Updated AntS1 cgminer binary to 4.3.2a
The binary and README are in my cgminer-binaries git here:
https://github.com/kanoi/cgminer-binaries/tree/master/AntS1  <-- Follow this link to get the new binary

Read the README on the screen there for how to replace the /usr/bin/cgminer binary in your AntS1 with the new one.

Thus it includes a client.reconnect patch:
"minimise the risk of the man-in-the-middle attack of redirecting you to a different pool"

This, as usual, includes the cgminer patch for the luci web display.

There's info in the README to update the luci code if LSTime is showing incorrectly after the update
(most newer AntS1's)

I've also documented steps to update the cgminer-monitor to restart cgminer if Elapsed Time is greater than 4 weeks.
This usually means the clock has messed up on the AntS1.
If you do mine for 4 weeks non-stop, it's simply a cgminer restart so no problem.

My source for this version is here:
https://github.com/kanoi/cgminer/tree/ants1-4.3.2a-85fcf0c

This binary includes all cgminer changes up to 4.3.2 and forward after that up to:
https://github.com/ckolivas/cgminer/commit/686d648f15d6c70f252c411242ecd7edc7294f90

Pool: https://kano.is Here on Bitcointalk: Forum BTC: 1KanoPb8cKYqNrswjaA8cRDk4FAS9eDMLU
FreeNode IRC: irc.freenode.net channel #kano.is Majority developer of the ckpool code
Help keep Bitcoin secure by mining on pools with full block verification on all blocks - and NO empty blocks!
Raptor2213
Full Member
***
Offline Offline

Activity: 210
Merit: 100


View Profile
May 04, 2014, 02:41:02 AM
 #14997

Updated AntS1 cgminer binary to 4.3.2a
The binary and README are in my cgminer-binaries git here:
https://github.com/kanoi/cgminer-binaries/tree/master/AntS1  <-- Follow this link to get the new binary

Read the README on the screen there for how to replace the /usr/bin/cgminer binary in your AntS1 with the new one.

Thus it includes a client.reconnect patch:
"minimise the risk of the man-in-the-middle attack of redirecting you to a different pool"

This, as usual, includes the cgminer patch for the luci web display.

There's info in the README to update the luci code if LSTime is showing incorrectly after the update
(most newer AntS1's)

I've also documented steps to update the cgminer-monitor to restart cgminer if Elapsed Time is greater than 4 weeks.
This usually means the clock has messed up on the AntS1.
If you do mine for 4 weeks non-stop, it's simply a cgminer restart so no problem.

My source for this version is here:
https://github.com/kanoi/cgminer/tree/ants1-4.3.2a-85fcf0c

This binary includes all cgminer changes up to 4.3.2 and forward after that up to:
https://github.com/ckolivas/cgminer/commit/686d648f15d6c70f252c411242ecd7edc7294f90


Good to know, now I need to downgrade to 4.2.2a.  I use a service that uses the client.redirect 'feature' to redirect to other pools.  I don't suppose there's a command-line option to disable this?

Did something I say help you out?    BTC - 18oTipf66z8dbwTgRCiPjbdPmqEP7zuCFb
kano
Legendary
*
Offline Offline

Activity: 2520
Merit: 1045


Linux since 1997 RedHat 4


View Profile
May 04, 2014, 05:11:26 AM
 #14998

...
Good to know, now I need to downgrade to 4.2.2a.  I use a service that uses the client.redirect 'feature' to redirect to other pools.  I don't suppose there's a command-line option to disable this?
You do realise that only the pool you are mining to can send a client.reconnect right?
(unless it's a network hack that allows them to steal your hashes)
So in the case of that 'service' they can only use reconnect once anyway.

Pool: https://kano.is Here on Bitcointalk: Forum BTC: 1KanoPb8cKYqNrswjaA8cRDk4FAS9eDMLU
FreeNode IRC: irc.freenode.net channel #kano.is Majority developer of the ckpool code
Help keep Bitcoin secure by mining on pools with full block verification on all blocks - and NO empty blocks!
Raptor2213
Full Member
***
Offline Offline

Activity: 210
Merit: 100


View Profile
May 04, 2014, 05:19:43 AM
 #14999

...
Good to know, now I need to downgrade to 4.2.2a.  I use a service that uses the client.redirect 'feature' to redirect to other pools.  I don't suppose there's a command-line option to disable this?
You do realise that only the pool you are mining to can send a client.reconnect right?
(unless it's a network hack that allows them to steal your hashes)
So in the case of that 'service' they can only use reconnect once anyway.

This site is designed to function in place of normal failover (for CUDAminers) as well as to allow you to sell your hashes to other users.  It uses client.reconnect requests as part of the pool-swapping feature, and it could, potentially, send several.

Did something I say help you out?    BTC - 18oTipf66z8dbwTgRCiPjbdPmqEP7zuCFb
kano
Legendary
*
Offline Offline

Activity: 2520
Merit: 1045


Linux since 1997 RedHat 4


View Profile
May 04, 2014, 05:21:05 AM
 #15000

...
Good to know, now I need to downgrade to 4.2.2a.  I use a service that uses the client.redirect 'feature' to redirect to other pools.  I don't suppose there's a command-line option to disable this?
You do realise that only the pool you are mining to can send a client.reconnect right?
(unless it's a network hack that allows them to steal your hashes)
So in the case of that 'service' they can only use reconnect once anyway.

This site is designed to function in place of normal failover (for CUDAminers) as well as to allow you to sell your hashes to other users.  It uses client.reconnect requests as part of the pool-swapping feature, and it could, potentially, send several.
You can't reconnect a connection with client.reconnect unless you are the pool you are mining to, in any stratum implementation.

(Edit: or any version of cgminer)

Pool: https://kano.is Here on Bitcointalk: Forum BTC: 1KanoPb8cKYqNrswjaA8cRDk4FAS9eDMLU
FreeNode IRC: irc.freenode.net channel #kano.is Majority developer of the ckpool code
Help keep Bitcoin secure by mining on pools with full block verification on all blocks - and NO empty blocks!
Pages: « 1 ... 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 [750] 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 ... 847 »
  Print  
 
Jump to:  

Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!