Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Call_Me_Bambi]

Any one, need help

Amd openCl platform not found
No Nvidia cuda gpus detected
No amd open cl ar nvidia cuda gpus found, exit

Just over night happen

A little (in fact a lot) more information would be helpful to help us solve your problem. Some info on your rig setup and posting you config too would go a long way.

[1714841532]

1714841532

[1714841532]

1714841532

[tg88]

Any one, need help

Amd openCl platform not found
No Nvidia cuda gpus detected
No amd open cl ar nvidia cuda gpus found, exit

Just over night happen

Any problems related to a driver, the gpus are not being detected.

[AzzAz]

Any one, need help

Amd openCl platform not found
No Nvidia cuda gpus detected
No amd open cl ar nvidia cuda gpus found, exit

Just over night happen

Any problems related to a driver, the gpus are not being detected.

it's just windows updated ( cumulative one ). DDU etc...

[jeremyismer]

Any one, need help

Amd openCl platform not found
No Nvidia cuda gpus detected
No amd open cl ar nvidia cuda gpus found, exit

Just over night happen

Any problems related to a driver, the gpus are not being detected.

it's just windows updated ( cumulative one ). DDU etc...

If you updated to 1803 you need to roll back. This has been discussed earlier in the forum.

[valev1]

Any one, need help

Amd openCl platform not found
No Nvidia cuda gpus detected
No amd open cl ar nvidia cuda gpus found, exit

Just over night happen

Any problems related to a driver, the gpus are not being detected.

it's just windows updated ( cumulative one ). DDU etc...

If you updated to 1803 you need to roll back. This has been discussed earlier in the forum.

you do not need to roll back any more, just after the update use DDU and then install latest AMD drivers, it works fine now

[raske]

cant wait for the 2080 series results 
I belive that they will burn out some double MHs comared to the 1080 series

[RivAngE]

cant wait for the 2080 series results 
I belive that they will burn out some double MHs comared to the 1080 series

Nah... I believe it'll take a lot of time FOR US to take full advantage of these cards.
My guess is that after about a month they'll figure a way to use the tensor cores to improve the hashrate but if the gain is big enough it'll only be made available privately. The rest of us will get a miner with a dev fee like 6 months later, after enough people have managed to crack down on these cards.

An alternative scenario is that there will be no mining farms with the 20 series cards and therefore whatever miner for the 20 series is developed, it'll be available for the public. However I'm more thrilled for Ray Tracing enabled games than mining!

[sneg5555]

Check this guide: 
How to Set Up and Run Claymore’s Miner - for amateur miners

[gsi5555]

Check this guide: 
How to Set Up and Run Claymore’s Miner - for amateur miners

nice

[MinerosYV]

Any one, need help

Amd openCl platform not found
No Nvidia cuda gpus detected
No amd open cl ar nvidia cuda gpus found, exit

Just over night happen

Any problems related to a driver, the gpus are not being detected.

it's just windows updated ( cumulative one ). DDU etc...

If you updated to 1803 you need to roll back. This has been discussed earlier in the forum.

you do not need to roll back any more, just after the update use DDU and then install latest AMD drivers, it works fine now

You don't need to roll back, just DDU and reinstall the drivers

[jeremyismer]

Any one, need help

Amd openCl platform not found
No Nvidia cuda gpus detected
No amd open cl ar nvidia cuda gpus found, exit

Just over night happen

Any problems related to a driver, the gpus are not being detected.

it's just windows updated ( cumulative one ). DDU etc...

If you updated to 1803 you need to roll back. This has been discussed earlier in the forum.

you do not need to roll back any more, just after the update use DDU and then install latest AMD drivers, it works fine now

You don't need to roll back, just DDU and reinstall the drivers

What version Radeon drivers are you using?

[raske]

anyone here using MSI Armor 570 8GB not bios modded, with the lastest driver and compute mode on?

[carlo_0000]

hey i have an other problem with all my nvidia ring  and msi afterburner

msi after burner has a bug ?   the max temp limit does not work , it s on 72°c  in afternoon but when it s hot some gpu goes to 90°

it s working fine on the amd

https://ibb.co/b0TBuz (pic)

[bitgameSolo]

why is everyone thinking 20XX series will mine better? Drivers will be new and unpolished, but more importantly, wasn't there some hashing advantage to using GDDR5 like in the 1070 series? or am I missing something? Dollar per MH/s the 10XX series seems to be the way to go...

[Raja_MBZ]

anyone here using MSI Armor 570 8GB not bios modded, with the lastest driver and compute mode on?

Yes...?

[ZergShadow]

I have installed latest nvidia driver  411.63  and minet stopped working.how to fix that ?

[Raja_MBZ]

I have installed latest nvidia driver  411.63  and minet stopped working.how to fix that ?

Seems like your new driver ain't capable of running the miner. Roll-back to the previous driver or uninstall the newly installed driver and install again the previous one.

[damba_]

hey i have an other problem with all my nvidia ring  and msi afterburner

msi after burner has a bug ?   the max temp limit does not work , it s on 72°c  in afternoon but when it s hot some gpu goes to 90°

it s working fine on the amd

https://ibb.co/b0TBuz (pic)

Maybe try adding command -fanmin, -fanmax or -tt in your Claymore miner.
For example -tt 70 should set your target gpu temperature to 70°C.
Or even better, set fixed fan speed to e.g. 70% by adding command -tt -70
I know this works on AMD cards, but I am not sure it will work on nvidia, but you can try it out.

[AzzAz]

hey i have an other problem with all my nvidia ring  and msi afterburner

msi after burner has a bug ?   the max temp limit does not work , it s on 72°c  in afternoon but when it s hot some gpu goes to 90°

it s working fine on the amd

https://ibb.co/b0TBuz (pic)

Maybe try adding command -fanmin, -fanmax or -tt in your Claymore miner.
For example -tt 70 should set your target gpu temperature to 70°C.
Or even better, set fixed fan speed to e.g. 70% by adding command -tt -70
I know this works on AMD cards, but I am not sure it will work on nvidia, but you can try it out.

Or try older driver, dating as AB...

[cjclm7]

Fellow users of Claymore, I need some help

I have 1 miner with 6x AMD RX580 mining on Linux Mint 18.3, Kernel 4.13.0-41, amdgpu-pro driver 17.50, Claymore 11.9

The miner is running stable 175Mhs but still need some fine tuning.

I have modified the BIOS of the RX580 to achieve near 30MHs just by copying the bootstraps. Did not change values on the voltage.

Since I am achieving 175MHs means I am close to the 180MHs that is the standard for these RX580. So the MHs is not the issue.

The issue (where I need help) is related with Claymore software:

    1 - No matter what changes I do in Claymore parameters -cclock and -mclock it has no effect whatsoever on the mining hash that is constant at 175MHs. This is what I do not understand. It seems the miner Claymore has no control over the GPU's clocks (core and memory)

    2 - When running same miner on Windows 10 Pro I can adjust power usage (undervolting) to reach less power consumption by using OverdriveNTool and adjust voltages for 800 and 875 thus running the miner at lower temperatures and lower power consumption. I was expecting reach the same good results by adjusting the Claymore parameters to -cdvvc=800 and -mdvvc=875 but it does not work. It seems the miner Claymore has no control over the GPUs voltage (core and memory)

Here is my start.sh:

#!/bin/bash
export GPU_MAX_ALLOC_PERCENT=100
./ethdcrminer64 -epool ssl://eu1.ethermine.org:5555 -ewal xxx -epsw x -eworker xxx -etha 2 -asm 1 -mode 1 -wd 1 -tt 65 -cclock 1150 -mclock 2030 -cvddc 800 -mvddc 875 -platform 1 -y 1

Unless I am forgetting to do some adjustment I am reaching the conclusion the Claymore software is useless to adjust clock and voltage on Linux. It seems that the parameters -cclock -mclock -cdvvc -mdvvc are useless on Linux. Can this conclusion be correct?