dragonmike
|
|
April 16, 2018, 04:17:51 PM Last edit: April 16, 2018, 04:33:30 PM by dragonmike |
|
Hi I'm trying this on my rig of 570's (with ETH strap). Cards are clocked at 1220/1900. Running these parameters on algo type litev7 (turtle coin)... { "id" : 0, "intensity" : 100, "worksize" : 8, "threads" : 2}, ...I get quite low hashrates. The GPUs are hovering just over 1000 h/s. Isnt't that low for litev7? Am I not using the right parameters? EDIT: looks like I found it myself: reduced intensity further to 54 (half of 108, which was automatically selected when setting it at "0"). Now getting hashrates just shy of 1850 per card. That's more like it, isn't it?
|
|
|
|
sundownz
|
|
April 16, 2018, 05:34:35 PM |
|
Okay guys... I got it... the program at intensity "0" was setting all four cards to "118"
So... I changed GPU-0 to "100" manually and it's working now =)
12% faster than XMR-STAK.
Thanks for the assistance!
just wanted to tell you that set intensities by hand, you can get out probably more hash than just leaving on 0 (auto). Not every gpu is same, and sometimes auto detected value works great for one, but not an other, same card. Also try 2 threads per gpu, you will get better results Thanks! Gained another 5% with 2 threads =)
|
|
|
|
cryptosize
|
|
April 16, 2018, 05:40:20 PM |
|
Hello everyone!
Does this miner support TeraScale/VLIW Radeon GPUs?
|
|
|
|
christiano88
Member
Offline
Activity: 161
Merit: 10
|
|
April 16, 2018, 06:28:40 PM |
|
How do I put an address and paymentID for the wallet in this miner?
|
|
|
|
doktor83 (OP)
|
|
April 16, 2018, 07:41:24 PM |
|
How do I put an address and paymentID for the wallet in this miner?
depends from pool. you can find info on every pool how to mine with address and payment id. For ex : xmrpool.eu uses this format wallet@paymentidnanopool uses this format wallet.paymentidyou set this in the wallet parameter in config file
|
|
|
|
doktor83 (OP)
|
|
April 16, 2018, 07:48:11 PM |
|
Hello everyone!
Does this miner support TeraScale/VLIW Radeon GPUs?
it should work, but you wont get speeds like on old claymore. Which card do you have?
|
|
|
|
Larvitar
Jr. Member
Offline
Activity: 196
Merit: 1
|
|
April 16, 2018, 07:53:16 PM |
|
Hi dorktor83. I'm stick at your miner, although have AwesomeMiner. Ya, SRBMiner is kicking asses! But patrike spoke if SRBMiner has a working API he could add it in AwesomeMiner support (would be great). Do you have plans to make an API for SRBMiner?
|
|
|
|
doktor83 (OP)
|
|
April 16, 2018, 08:04:22 PM |
|
Hi dorktor83. I'm stick at your miner, although have AwesomeMiner. Ya, SRBMiner is kicking asses! But patrike spoke if SRBMiner has a working API he could add it in AwesomeMiner support (would be great). Do you have plans to make an API for SRBMiner? thanks yes , i have it in plan, smos dev is also waiting on me to make an API
|
|
|
|
livada
Newbie
Offline
Activity: 417
Merit: 0
|
|
April 16, 2018, 08:16:22 PM Last edit: April 16, 2018, 08:50:04 PM by livada |
|
Good job. 3*Vega 56 Heavy = 4400hr UltraHeavy = 10500hr litev7 = 12300hr v7 = 5850hr IZVRSTAN posao majstore. Probao sma ga na moneru-sumu-trtl-stl i ipbc i daje bolje rezultate od casta i staka. npr nikako nisaHAVEN uspio natjerat da mi daje preko 4100 sa 3 vege56 a s tvojim ide i na 4400:) i napokon da povuce malo vise struje SUPER POSO si odradio samo nastavi tako.. poz
|
|
|
|
goodb
Newbie
Offline
Activity: 126
Merit: 0
|
|
April 16, 2018, 09:06:38 PM |
|
like some other person also said after 1.4.1 version there is a bug with paymentid.worker/pass syntax . /* Address of you wallet */ "wallet" : "ExchangeXmrDepositwalletadress.PaymentID.workername/nanopoolpasswordforjsonsettings",
The above configuration is working with version 1.3.1..No problem. But same config.txt file with same start.bat file in version 1.4.1 (just working start.bat and working config.txt is copied to 1.4.1 folder)..--> NO HASH on nanopool (today I left opened 6 hours and mined for nothing, shares found in srbminer but , hash on nanopool and balance 0 = zero ! )
|
|
|
|
alczaty
Newbie
Offline
Activity: 38
Merit: 0
|
|
April 16, 2018, 10:34:09 PM |
|
like some other person also said after 1.4.1 version there is a bug with paymentid.worker/pass syntax . /* Address of you wallet */ "wallet" : "ExchangeXmrDepositwalletadress.PaymentID.workername/nanopoolpasswordforjsonsettings",
The above configuration is working with version 1.3.1..No problem. But same config.txt file with same start.bat file in version 1.4.1 (just working start.bat and working config.txt is copied to 1.4.1 folder)..--> NO HASH on nanopool (today I left opened 6 hours and mined for nothing, shares found in srbminer but , hash on nanopool and balance 0 = zero ! ) you must set your wallet adress in pools.txt not in config
|
|
|
|
joaocha
|
|
April 16, 2018, 10:38:18 PM |
|
No linux version?
|
|
|
|
livada
Newbie
Offline
Activity: 417
Merit: 0
|
|
April 16, 2018, 11:13:21 PM |
|
what coin uses this ultraheavy algo?
IPBC will once it forks. Should be in the next few hours. How is this UltraHeavy?? Results from my test rig IPBC Forked: RX570/8G-RX570/8G-RX580/4G-RX560/4G-RX560/4G [2018-04-16 14:12:06] GPU0: 1874.0 H/S [T: 54c, RPM: 1119] [2018-04-16 14:12:06] GPU1: 1991.0 H/S [T: 55c, RPM: 837] [2018-04-16 14:12:06] GPU2: 1932.0 H/S [T: 63c, RPM: 1092] [2018-04-16 14:12:06] GPU3: 816.0 H/S [T: 59c, RPM: 1221] [2018-04-16 14:12:06] GPU4: 913.0 H/S [T: 59c, RPM: 1195] [2018-04-16 14:12:06] Total: 7526.0 H/S 4x Vega 56 [2018-04-16 14:19:33] GPU0: 2634.0 H/S [T: 49c, RPM: 2559] [2018-04-16 14:19:33] GPU1: 2650.0 H/S [T: 49c, RPM: 2879] [2018-04-16 14:19:33] GPU2: 2648.0 H/S [T: 51c, RPM: 2780] [2018-04-16 14:19:33] GPU3: 2650.0 H/S [T: 49c, RPM: 2738] @Bhaal1 - this is for ultra heavy? this is small hr my 3* vega 56 have this result lite 540Whttps://image.prntscr.com/image/qLdvasSySru4m3Y7yIM2Hg.jpglite v7 555Whttps://image.prntscr.com/image/z_H7yOz7QYqBMdCHI-Uvpw.jpgheavy 500Whttps://image.prntscr.com/image/fGgcpvG7Qzumfk7yOEB1CQ.jpgultraheavy 520Whttps://image.prntscr.com/image/5jTb-eaBRNWCm_Aq67iUtw.jpg
|
|
|
|
oldgnom
Newbie
Offline
Activity: 5
Merit: 0
|
|
April 16, 2018, 11:34:37 PM |
|
|
|
|
|
alczaty
Newbie
Offline
Activity: 38
Merit: 0
|
|
April 16, 2018, 11:37:40 PM |
|
change intensity. which card ?
|
|
|
|
bigcoin99
Newbie
Offline
Activity: 4
Merit: 0
|
|
April 16, 2018, 11:44:11 PM Last edit: April 17, 2018, 12:49:38 AM by bigcoin99 |
|
change intensity. which card ? same problem ... right after dev fee ...
|
|
|
|
|
Gadjan
Newbie
Offline
Activity: 9
Merit: 0
|
|
April 17, 2018, 01:13:24 AM |
|
How do I need to enter email address for nanopool notification, where exactly? In the password field password: x:mail... or address.worker/email?
|
|
|
|
cryptosize
|
|
April 17, 2018, 01:44:07 AM |
|
Hello everyone!
Does this miner support TeraScale/VLIW Radeon GPUs?
it should work, but you wont get speeds like on old claymore. Which card do you have? Radeon 5770 1GB GDDR5. And yeah, hashing speed is only half compared to Claymore v9.7...
|
|
|
|
marcos5872
Member
Offline
Activity: 107
Merit: 10
|
|
April 17, 2018, 02:39:41 AM |
|
hi, 740 h/s for RX 580 4 GB on CN Heavy is a good result???
|
|
|
|
|