Bitcoin Forum
September 21, 2021, 06:06:48 AM *
News: Latest Bitcoin Core release: 22.0 [Torrent]
 
   Home   Help Search Login Register More  
Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [40] 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 ... 366 »
  Print  
Author Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching  (Read 235699 times)
livada
Newbie
*
Offline Offline

Activity: 416
Merit: 0


View Profile WWW
April 16, 2018, 11:13:21 PM
 #781

what coin uses this ultraheavy algo?

IPBC will once it forks. Should be in the next few hours.

How is this UltraHeavy??
Results from my test rig IPBC Forked:

RX570/8G-RX570/8G-RX580/4G-RX560/4G-RX560/4G

[2018-04-16 14:12:06] GPU0:    1874.0 H/S [T: 54c, RPM: 1119]
[2018-04-16 14:12:06] GPU1:    1991.0 H/S [T: 55c, RPM: 837]
[2018-04-16 14:12:06] GPU2:    1932.0 H/S [T: 63c, RPM: 1092]
[2018-04-16 14:12:06] GPU3:    816.0 H/S [T: 59c, RPM: 1221]
[2018-04-16 14:12:06] GPU4:    913.0 H/S [T: 59c, RPM: 1195]
[2018-04-16 14:12:06] Total:   7526.0 H/S



4x Vega 56
[2018-04-16 14:19:33] GPU0:    2634.0 H/S [T: 49c, RPM: 2559]
[2018-04-16 14:19:33] GPU1:    2650.0 H/S [T: 49c, RPM: 2879]
[2018-04-16 14:19:33] GPU2:    2648.0 H/S [T: 51c, RPM: 2780]
[2018-04-16 14:19:33] GPU3:    2650.0 H/S [T: 49c, RPM: 2738]

@Bhaal1 - this is for ultra heavy? this is small hr

my 3* vega 56 have this result

lite 540W
https://image.prntscr.com/image/qLdvasSySru4m3Y7yIM2Hg.jpg
lite v7 555W
https://image.prntscr.com/image/z_H7yOz7QYqBMdCHI-Uvpw.jpg
heavy 500W
https://image.prntscr.com/image/fGgcpvG7Qzumfk7yOEB1CQ.jpg
ultraheavy 520W
https://image.prntscr.com/image/5jTb-eaBRNWCm_Aq67iUtw.jpg
1632204408
Hero Member
*
Offline Offline

Posts: 1632204408

View Profile Personal Message (Offline)

Ignore
1632204408
Reply with quote  #2

1632204408
Report to moderator
1632204408
Hero Member
*
Offline Offline

Posts: 1632204408

View Profile Personal Message (Offline)

Ignore
1632204408
Reply with quote  #2

1632204408
Report to moderator
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
1632204408
Hero Member
*
Offline Offline

Posts: 1632204408

View Profile Personal Message (Offline)

Ignore
1632204408
Reply with quote  #2

1632204408
Report to moderator
oldgnom
Newbie
*
Offline Offline

Activity: 5
Merit: 0


View Profile
April 16, 2018, 11:34:37 PM
 #782

https://prntscr.com/j66xpa
wtf??? IPBC
alczaty
Newbie
*
Offline Offline

Activity: 37
Merit: 0


View Profile
April 16, 2018, 11:37:40 PM
 #783

change intensity.
which card ?
bigcoin99
Newbie
*
Offline Offline

Activity: 4
Merit: 0


View Profile
April 16, 2018, 11:44:11 PM
Last edit: April 17, 2018, 12:49:38 AM by bigcoin99
 #784



same problem ... right after dev fee ...
livada
Newbie
*
Offline Offline

Activity: 416
Merit: 0


View Profile WWW
April 17, 2018, 12:18:31 AM
 #785

IPBC is ultraheavy and work fine
3*vega 56
"intensity" : 235,

ultraheavy 520W
https://image.prntscr.com/image/5jTb-eaBRNWCm_Aq67iUtw.jpg
Gadjan
Newbie
*
Offline Offline

Activity: 8
Merit: 0


View Profile
April 17, 2018, 01:13:24 AM
 #786

How do I need to enter email address for nanopool notification, where exactly? In the password field password: x:mail... or address.worker/email?
cryptosize
Jr. Member
*
Offline Offline

Activity: 296
Merit: 4


View Profile
April 17, 2018, 01:44:07 AM
 #787

Hello everyone!

Does this miner support TeraScale/VLIW Radeon GPUs?

it should work, but you wont get speeds like on old claymore.
Which card do you have?
Radeon 5770 1GB GDDR5.

And yeah, hashing speed is only half compared to Claymore v9.7...
marcos5872
Member
**
Offline Offline

Activity: 107
Merit: 10


View Profile
April 17, 2018, 02:39:41 AM
 #788

hi, 740 h/s for RX 580 4 GB on CN Heavy is a good result???
hitmandn
Newbie
*
Offline Offline

Activity: 35
Merit: 0


View Profile
April 17, 2018, 03:52:02 AM
 #789

hi, 740 h/s for RX 580 4 GB on CN Heavy is a good result???

That is a max speed for heavy  Embarrassed
hitmandn
Newbie
*
Offline Offline

Activity: 35
Merit: 0


View Profile
April 17, 2018, 04:08:04 AM
 #790

[2018-04-17 10:46:24] GPU2:    1923.0 H/S [T: 58c, RPM: 2611]
[2018-04-17 10:46:24] GPU3:    1929.0 H/S [T: 53c, RPM: 2508]
[2018-04-17 10:46:24] GPU4:    1926.0 H/S [T: 61c, RPM: 2548]
[2018-04-17 10:46:24] GPU5:    1922.0 H/S [T: 59c, RPM: 2637]
[2018-04-17 10:46:24] Total:   11549.0 H/S
[2018-04-17 10:48:25] GPU0:    1921.0 H/S [T: 54c, RPM: 2614]
[2018-04-17 10:48:25] GPU1:    1922.0 H/S [T: 59c, RPM: 2694]
[2018-04-17 10:48:25] GPU2:    1923.0 H/S [T: 58c, RPM: 2615]
[2018-04-17 10:48:25] GPU3:    1924.0 H/S [T: 54c, RPM: 2511]
[2018-04-17 10:48:25] GPU4:    1925.0 H/S [T: 61c, RPM: 2540]
[2018-04-17 10:48:25] GPU5:    1923.0 H/S [T: 59c, RPM: 2644]
[2018-04-17 10:48:25] Total:   11538.0 H/S
[2018-04-17 10:49:30] Pool sent a new job (ID: 462024164814535)
[2018-04-17 10:50:26] GPU0:    1923.0 H/S [T: 54c, RPM: 2611]
[2018-04-17 10:50:26] GPU1:    1923.0 H/S [T: 59c, RPM: 2690]
[2018-04-17 10:50:26] GPU2:    1920.0 H/S [T: 58c, RPM: 2620]
[2018-04-17 10:50:26] GPU3:    1925.0 H/S [T: 54c, RPM: 2513]
[2018-04-17 10:50:26] GPU4:    1927.0 H/S [T: 61c, RPM: 2548]
[2018-04-17 10:50:26] GPU5:    1924.0 H/S [T: 59c, RPM: 2632]
[2018-04-17 10:50:26] Total:   11542.0 H/S
[2018-04-17 10:51:32] Pool sent a new job (ID: 604030451113644)
[2018-04-17 10:52:16] Pool sent a new job (ID: 606098711433573)
[2018-04-17 10:52:27] GPU0:    1919.0 H/S [T: 54c, RPM: 2607]
[2018-04-17 10:52:27] GPU1:    1923.0 H/S [T: 59c, RPM: 2691]
[2018-04-17 10:52:27] GPU2:    1921.0 H/S [T: 58c, RPM: 2620]
[2018-04-17 10:52:27] GPU3:    1927.0 H/S [T: 53c, RPM: 2511]
[2018-04-17 10:52:27] GPU4:    1925.0 H/S [T: 61c, RPM: 2531]
[2018-04-17 10:52:27] GPU5:    1924.0 H/S [T: 59c, RPM: 2642]
[2018-04-17 10:52:27] Total:   11539.0 H/S
[2018-04-17 10:53:05] Pool difficulty: 1531728


I used Srbminer for IPBC
After about 1 hour, i don't know why have not accept result from pool. I must restart SRBMiner
doktor83
Hero Member
*****
Offline Offline

Activity: 1764
Merit: 611


View Profile WWW
April 17, 2018, 04:43:41 AM
Last edit: April 17, 2018, 06:55:43 AM by doktor83
 #791

V1.4.3
- Ultraheavy algo name changed to ipbc
- Fixed devfee mining got stuck

just a quick fix, so devfee mining won't get stuck sometimes (i hope).
Also changed ipbc coin algo name from ultraheavy to ipbc, cause ultraheavy isn't appropriate algo name for it anymore Smiley

So if you want to mine IPBC coin use it like this in config :

"cryptonight_type" : "ipbc"

SRBMiner-MULTI thread - HERE
http://www.srbminer.com
doktor83
Hero Member
*****
Offline Offline

Activity: 1764
Merit: 611


View Profile WWW
April 17, 2018, 04:58:54 AM
 #792

How do I need to enter email address for nanopool notification, where exactly? In the password field password: x:mail... or address.worker/email?

From nanopool:

Examples for address, payment-ID, worker and email parameters:

Mining to exchange with payment-ID, worker and email:
ADDRESS.PAYMENT-ID.WORKER/EMAIL
Mining to local wallet without payment-ID, with worker and email:
ADDRESS.WORKER/EMAIL
Mining to exchange with payment-ID and worker:
ADDRESS.PAYMENT-ID.WORKER
Mining to local wallet without payment-ID, with worker:
ADDRESS.WORKER

you put it in the wallet parameter

SRBMiner-MULTI thread - HERE
http://www.srbminer.com
doktor83
Hero Member
*****
Offline Offline

Activity: 1764
Merit: 611


View Profile WWW
April 17, 2018, 04:59:48 AM
 #793

[2018-04-17 10:46:24] GPU2:    1923.0 H/S [T: 58c, RPM: 2611]
[2018-04-17 10:46:24] GPU3:    1929.0 H/S [T: 53c, RPM: 2508]
[2018-04-17 10:46:24] GPU4:    1926.0 H/S [T: 61c, RPM: 2548]
[2018-04-17 10:46:24] GPU5:    1922.0 H/S [T: 59c, RPM: 2637]
[2018-04-17 10:46:24] Total:   11549.0 H/S
[2018-04-17 10:48:25] GPU0:    1921.0 H/S [T: 54c, RPM: 2614]
[2018-04-17 10:48:25] GPU1:    1922.0 H/S [T: 59c, RPM: 2694]
[2018-04-17 10:48:25] GPU2:    1923.0 H/S [T: 58c, RPM: 2615]
[2018-04-17 10:48:25] GPU3:    1924.0 H/S [T: 54c, RPM: 2511]
[2018-04-17 10:48:25] GPU4:    1925.0 H/S [T: 61c, RPM: 2540]
[2018-04-17 10:48:25] GPU5:    1923.0 H/S [T: 59c, RPM: 2644]
[2018-04-17 10:48:25] Total:   11538.0 H/S
[2018-04-17 10:49:30] Pool sent a new job (ID: 462024164814535)
[2018-04-17 10:50:26] GPU0:    1923.0 H/S [T: 54c, RPM: 2611]
[2018-04-17 10:50:26] GPU1:    1923.0 H/S [T: 59c, RPM: 2690]
[2018-04-17 10:50:26] GPU2:    1920.0 H/S [T: 58c, RPM: 2620]
[2018-04-17 10:50:26] GPU3:    1925.0 H/S [T: 54c, RPM: 2513]
[2018-04-17 10:50:26] GPU4:    1927.0 H/S [T: 61c, RPM: 2548]
[2018-04-17 10:50:26] GPU5:    1924.0 H/S [T: 59c, RPM: 2632]
[2018-04-17 10:50:26] Total:   11542.0 H/S
[2018-04-17 10:51:32] Pool sent a new job (ID: 604030451113644)
[2018-04-17 10:52:16] Pool sent a new job (ID: 606098711433573)
[2018-04-17 10:52:27] GPU0:    1919.0 H/S [T: 54c, RPM: 2607]
[2018-04-17 10:52:27] GPU1:    1923.0 H/S [T: 59c, RPM: 2691]
[2018-04-17 10:52:27] GPU2:    1921.0 H/S [T: 58c, RPM: 2620]
[2018-04-17 10:52:27] GPU3:    1927.0 H/S [T: 53c, RPM: 2511]
[2018-04-17 10:52:27] GPU4:    1925.0 H/S [T: 61c, RPM: 2531]
[2018-04-17 10:52:27] GPU5:    1924.0 H/S [T: 59c, RPM: 2642]
[2018-04-17 10:52:27] Total:   11539.0 H/S
[2018-04-17 10:53:05] Pool difficulty: 1531728


I used Srbminer for IPBC
After about 1 hour, i don't know why have not accept result from pool. I must restart SRBMiner


probably pool raised diff so you did not find 50 shares a minute Smiley
i dont see any rejects here.

SRBMiner-MULTI thread - HERE
http://www.srbminer.com
hitmandn
Newbie
*
Offline Offline

Activity: 35
Merit: 0


View Profile
April 17, 2018, 05:26:35 AM
 #794

[2018-04-17 10:46:24] GPU2:    1923.0 H/S [T: 58c, RPM: 2611]
[2018-04-17 10:46:24] GPU3:    1929.0 H/S [T: 53c, RPM: 2508]
[2018-04-17 10:46:24] GPU4:    1926.0 H/S [T: 61c, RPM: 2548]
[2018-04-17 10:46:24] GPU5:    1922.0 H/S [T: 59c, RPM: 2637]
[2018-04-17 10:46:24] Total:   11549.0 H/S
[2018-04-17 10:48:25] GPU0:    1921.0 H/S [T: 54c, RPM: 2614]
[2018-04-17 10:48:25] GPU1:    1922.0 H/S [T: 59c, RPM: 2694]
[2018-04-17 10:48:25] GPU2:    1923.0 H/S [T: 58c, RPM: 2615]
[2018-04-17 10:48:25] GPU3:    1924.0 H/S [T: 54c, RPM: 2511]
[2018-04-17 10:48:25] GPU4:    1925.0 H/S [T: 61c, RPM: 2540]
[2018-04-17 10:48:25] GPU5:    1923.0 H/S [T: 59c, RPM: 2644]
[2018-04-17 10:48:25] Total:   11538.0 H/S
[2018-04-17 10:49:30] Pool sent a new job (ID: 462024164814535)
[2018-04-17 10:50:26] GPU0:    1923.0 H/S [T: 54c, RPM: 2611]
[2018-04-17 10:50:26] GPU1:    1923.0 H/S [T: 59c, RPM: 2690]
[2018-04-17 10:50:26] GPU2:    1920.0 H/S [T: 58c, RPM: 2620]
[2018-04-17 10:50:26] GPU3:    1925.0 H/S [T: 54c, RPM: 2513]
[2018-04-17 10:50:26] GPU4:    1927.0 H/S [T: 61c, RPM: 2548]
[2018-04-17 10:50:26] GPU5:    1924.0 H/S [T: 59c, RPM: 2632]
[2018-04-17 10:50:26] Total:   11542.0 H/S
[2018-04-17 10:51:32] Pool sent a new job (ID: 604030451113644)
[2018-04-17 10:52:16] Pool sent a new job (ID: 606098711433573)
[2018-04-17 10:52:27] GPU0:    1919.0 H/S [T: 54c, RPM: 2607]
[2018-04-17 10:52:27] GPU1:    1923.0 H/S [T: 59c, RPM: 2691]
[2018-04-17 10:52:27] GPU2:    1921.0 H/S [T: 58c, RPM: 2620]
[2018-04-17 10:52:27] GPU3:    1927.0 H/S [T: 53c, RPM: 2511]
[2018-04-17 10:52:27] GPU4:    1925.0 H/S [T: 61c, RPM: 2531]
[2018-04-17 10:52:27] GPU5:    1924.0 H/S [T: 59c, RPM: 2642]
[2018-04-17 10:52:27] Total:   11539.0 H/S
[2018-04-17 10:53:05] Pool difficulty: 1531728


I used Srbminer for IPBC
After about 1 hour, i don't know why have not accept result from pool. I must restart SRBMiner


probably pool raised diff so you did not find 50 shares a minute Smiley
i dont see any rejects here.

I don't now why, but when i restart SrbMiner, i have accept result from pool soon. I try above 5 time
wudafuxup
Full Member
***
Offline Offline

Activity: 393
Merit: 105



View Profile
April 17, 2018, 05:49:32 AM
 #795

I suggest leaving both the pool and config files as one single txt document (like version 1.3.1). Leaving it that way makes it really simple to setup quick batch files for different algo/pools. Having them both split makes it annoying since you have to point to 2 different txt files to run the miner.

I like crypto
hitmandn
Newbie
*
Offline Offline

Activity: 35
Merit: 0


View Profile
April 17, 2018, 06:03:30 AM
 #796

I suggest leaving both the pool and config files as one single txt document (like version 1.3.1). Leaving it that way makes it really simple to setup quick batch files for different algo/pools. Having them both split makes it annoying since you have to point to 2 different txt files to run the miner.

I agree  Grin
rig1313
Newbie
*
Offline Offline

Activity: 16
Merit: 0


View Profile
April 17, 2018, 06:16:15 AM
 #797

how we can add arguments in startup for srbminer ?

ive tried "--" but it doesnt work



crocozino
Sr. Member
****
Offline Offline

Activity: 420
Merit: 250



View Profile
April 17, 2018, 06:32:34 AM
 #798

thank you Doctor, I have tested your miner to mine turtle coin
in my mixed rig which have one vega and some rx480 and one rx570 the result seems about 5-7% higher then the same results form xmr-stack.
which is not much, but still a difference, stability seems to be ok as well.
will continue to use, thanks!
cryptopavan
Newbie
*
Offline Offline

Activity: 7
Merit: 0


View Profile
April 17, 2018, 06:42:12 AM
 #799

what coin uses this ultraheavy algo?

IPBC will once it forks. Should be in the next few hours.

How is this UltraHeavy??
Results from my test rig IPBC Forked:

RX570/8G-RX570/8G-RX580/4G-RX560/4G-RX560/4G

[2018-04-16 14:12:06] GPU0:    1874.0 H/S [T: 54c, RPM: 1119]
[2018-04-16 14:12:06] GPU1:    1991.0 H/S [T: 55c, RPM: 837]
[2018-04-16 14:12:06] GPU2:    1932.0 H/S [T: 63c, RPM: 1092]
[2018-04-16 14:12:06] GPU3:    816.0 H/S [T: 59c, RPM: 1221]
[2018-04-16 14:12:06] GPU4:    913.0 H/S [T: 59c, RPM: 1195]
[2018-04-16 14:12:06] Total:   7526.0 H/S



4x Vega 56
[2018-04-16 14:19:33] GPU0:    2634.0 H/S [T: 49c, RPM: 2559]
[2018-04-16 14:19:33] GPU1:    2650.0 H/S [T: 49c, RPM: 2879]
[2018-04-16 14:19:33] GPU2:    2648.0 H/S [T: 51c, RPM: 2780]
[2018-04-16 14:19:33] GPU3:    2650.0 H/S [T: 49c, RPM: 2738]

@Bhaal1 - this is for ultra heavy? this is small hr

my 3* vega 56 have this result

lite 540W
https://image.prntscr.com/image/qLdvasSySru4m3Y7yIM2Hg.jpg
lite v7 555W
https://image.prntscr.com/image/z_H7yOz7QYqBMdCHI-Uvpw.jpg
heavy 500W
https://image.prntscr.com/image/fGgcpvG7Qzumfk7yOEB1CQ.jpg
ultraheavy 520W
https://image.prntscr.com/image/5jTb-eaBRNWCm_Aq67iUtw.jpg

Hi livada can you please tell me what is the intensity you are using for v7, heavy,ultraheavy. Thanks in advance
doktor83
Hero Member
*****
Offline Offline

Activity: 1764
Merit: 611


View Profile WWW
April 17, 2018, 06:59:56 AM
 #800

[2018-04-17 10:46:24] GPU2:    1923.0 H/S [T: 58c, RPM: 2611]
[2018-04-17 10:46:24] GPU3:    1929.0 H/S [T: 53c, RPM: 2508]
[2018-04-17 10:46:24] GPU4:    1926.0 H/S [T: 61c, RPM: 2548]
[2018-04-17 10:46:24] GPU5:    1922.0 H/S [T: 59c, RPM: 2637]
[2018-04-17 10:46:24] Total:   11549.0 H/S
[2018-04-17 10:48:25] GPU0:    1921.0 H/S [T: 54c, RPM: 2614]
[2018-04-17 10:48:25] GPU1:    1922.0 H/S [T: 59c, RPM: 2694]
[2018-04-17 10:48:25] GPU2:    1923.0 H/S [T: 58c, RPM: 2615]
[2018-04-17 10:48:25] GPU3:    1924.0 H/S [T: 54c, RPM: 2511]
[2018-04-17 10:48:25] GPU4:    1925.0 H/S [T: 61c, RPM: 2540]
[2018-04-17 10:48:25] GPU5:    1923.0 H/S [T: 59c, RPM: 2644]
[2018-04-17 10:48:25] Total:   11538.0 H/S
[2018-04-17 10:49:30] Pool sent a new job (ID: 462024164814535)
[2018-04-17 10:50:26] GPU0:    1923.0 H/S [T: 54c, RPM: 2611]
[2018-04-17 10:50:26] GPU1:    1923.0 H/S [T: 59c, RPM: 2690]
[2018-04-17 10:50:26] GPU2:    1920.0 H/S [T: 58c, RPM: 2620]
[2018-04-17 10:50:26] GPU3:    1925.0 H/S [T: 54c, RPM: 2513]
[2018-04-17 10:50:26] GPU4:    1927.0 H/S [T: 61c, RPM: 2548]
[2018-04-17 10:50:26] GPU5:    1924.0 H/S [T: 59c, RPM: 2632]
[2018-04-17 10:50:26] Total:   11542.0 H/S
[2018-04-17 10:51:32] Pool sent a new job (ID: 604030451113644)
[2018-04-17 10:52:16] Pool sent a new job (ID: 606098711433573)
[2018-04-17 10:52:27] GPU0:    1919.0 H/S [T: 54c, RPM: 2607]
[2018-04-17 10:52:27] GPU1:    1923.0 H/S [T: 59c, RPM: 2691]
[2018-04-17 10:52:27] GPU2:    1921.0 H/S [T: 58c, RPM: 2620]
[2018-04-17 10:52:27] GPU3:    1927.0 H/S [T: 53c, RPM: 2511]
[2018-04-17 10:52:27] GPU4:    1925.0 H/S [T: 61c, RPM: 2531]
[2018-04-17 10:52:27] GPU5:    1924.0 H/S [T: 59c, RPM: 2642]
[2018-04-17 10:52:27] Total:   11539.0 H/S
[2018-04-17 10:53:05] Pool difficulty: 1531728


I used Srbminer for IPBC
After about 1 hour, i don't know why have not accept result from pool. I must restart SRBMiner


probably pool raised diff so you did not find 50 shares a minute Smiley
i dont see any rejects here.

I don't now why, but when i restart SrbMiner, i have accept result from pool soon. I try above 5 time

exactly, that's because the pool starts with a low diff, then adjusts it to your hashing power.
Don't worry everyting is ok Smiley

SRBMiner-MULTI thread - HERE
http://www.srbminer.com
Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [40] 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 ... 366 »
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!