Avalon ASIC users thread

[silverston]

after 20h I have
[Device Hardware%] => 1.6749
Is this OK?
[Firmware Version] => 20130821

[1713920641]

1713920641

[1713920641]

1713920641

[GenTarkin]

after 20h I have
[Device Hardware%] => 1.6749
Is this OK?
[Firmware Version] => 20130821

What clock speed?

[silverston]

after 20h I have
[Device Hardware%] => 1.6749
Is this OK?
[Firmware Version] => 20130821

What clock speed?

--avalon-auto
start clock 350Mhz

[lastbit]

anyone tried removing the rear panel for batch 1 and lowers temp?

I have removed for batch#3 and lowered temperature by 2C. The presure felt when keeping panel with the hand was pretty substantial. I'm sure that if the slots were larger and beveled on the inside too it would have been better.
You might give it a try, it's not even necessary to power down the machine if you're careful and don't mind back panel to lye captive by the power cord.

I cringe at the thought of one of those metal nuts bouncing onto the pdu board.

Neah, you'll just test PSU's short-circuit protection circuitry

[ProfMac]

Is there a way to set a 4th pool in the web interface?

[boombastic]

Is there a way to set a 4th pool in the web interface?

You might use the more option field for this, just append 4th pool setting to your avalon options, such as

--real-quiet --avalon-auto -o stratum+tcp://stratum.btcguild.com:3333 -O ur_worker_name:123456

Didn't tried it, but it should work.  Why do you need 4th pool?

[rampone]

Is my Avalon broken? I received mine after the time window said on the usb chip issue, seems like I was dumb not to check, now on vacation and far away from home, and my friend is helping at home. It worked fine for 2 month now at 350 mhz and started to act wierd yesterday.
With the built in router it seems to work for about 20 min and then stops working. On a computer I get the following in cgminer when i try to mine with it:


 [2013-08-22 20:00:40] 00000040   32 33 33 33 cb cc cc 4c  64 66 66 66 fd ff ff 7f |2333...Ldfff....|
 [2013-08-22 20:00:40] 00000050   96 99 99 99 2f 33 33 b3  c8 cc cc cc 61 66 66 e6 |..../33.....aff.|
 [2013-08-22 20:00:40] AVA0: usb_write got err 0
 [2013-08-22 20:00:40] AVA0: Get avalon read got err 0
 [2013-08-22 20:00:40] Avalon: Sent: Buffer delay: 12333us
 [2013-08-22 20:00:40] Avalon: Sent(96):
 [2013-08-22 20:00:40] 00000000   a4 20 32 18 07 00 00 08  74 01 00 00 2d 50 a0 12 |. 2.....t...-P..|
 [2013-08-22 20:00:40] 00000010   4e 07 1f 52 fd c5 0e b4  f8 ea 64 4d e3 4a 90 6c |N..R......dM.J.l|
 [2013-08-22 20:00:40] 00000020   90 84 5d 2c 78 55 fa ce  8a 29 d7 65 f0 61 e7 00 |..],xU...).e.a..|
 [2013-08-22 20:00:40] 00000030   52 16 51 bd 19 54 87 32  00 00 00 00 99 99 99 19 |R.Q..T.2........|
 [2013-08-22 20:00:40] 00000040   32 33 33 33 cb cc cc 4c  64 66 66 66 fd ff ff 7f |2333...Ldfff....|
 [2013-08-22 20:00:40] 00000050   96 99 99 99 2f 33 33 b3  c8 cc cc cc 61 66 66 e6 |..../33.....aff.|
 [2013-08-22 20:00:40] AVA0: usb_write got err 0
 [2013-08-22 20:00:40] Avalon: Sent: Buffer delay: 12333us
 [2013-08-22 20:00:40] AVA0: Get avalon read got err 0
 [2013-08-22 20:00:40] Avalon: Sent(96):
 [2013-08-22 20:00:40] 00000000   a4 20 32 18 07 00 00 08  74 01 00 00 23 9f 42 99 |. 2.....t...#.B.|
 [2013-08-22 20:00:40] 00000010   e9 5b ca 8f 8c b4 90 5a  25 dc c3 dd 0d 50 b8 08 |.[.....Z%....P..|
 [2013-08-22 20:00:40] 00000020   fa 6d ef 21 bf 8b fb 57  95 e8 9b 9a e8 27 ec f5 |.m.!...W.....'..|
 [2013-08-22 20:00:40] 00000030   52 16 51 bd 19 54 87 32  00 00 00 00 99 99 99 19 |R.Q..T.2........|
 [2013-08-22 20:00:40] 00000040   32 33 33 33 cb cc cc 4c  64 66 66 66 fd ff ff 7f |2333...Ldfff....|
 [2013-08-22 20:00:40] 00000050   96 99 99 99 2f 33 33 b3  c8 cc cc cc 61 66 66 e6 |..../33.....aff.|
 [2013-08-22 20:00:40] AVA0: usb_write got err 0

under linux with lsusb i get:
Bus 002 Device 010: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 002 Device 011: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC


Seems like the chips kinda still answer.


oh yeah. Its a 3 module one, and cgminer wants per default at the computer to start with 32 miners (like a 4 module one).

My friend near the avalon had to go, but will later open it up and check the controller board for version and for any molten chips. He also said he heard a kinda clicking sound, not directly from the power supply as far as he could locate.

Do you guys think its more a controller board issue or is it the power supply?

thx already for answers,

rampone

[ProfMac]

Is there a way to set a 4th pool in the web interface?

You might use the more option field for this, just append 4th pool setting to your avalon options, such as

--real-quiet --avalon-auto -o stratum+tcp://stratum.btcguild.com:3333 -O ur_worker_name:123456

Didn't tried it, but it should work.  Why do you need 4th pool?

I am hosting a 4th module.  I want to point it to eligius's pool with it's own payout address.  The only way I can think to do this is to have 3 miners point to 1 address, and the 4th miner point to the other address.

[ewibit]

after 20h I have
[Device Hardware%] => 1.6749
Is this OK?
[Firmware Version] => 20130821

are this numbers ok for AVA B1?


TIA

[driksson]

Few questions. (if there is an faq, please direct me)
1, Mutliple coin mining, i remember seeing a pool, which mines namecoins and litecoins along with bitcoins on the avalon.
Would it be any idea to do so? i mean, namecoins and litecoins are currently cheap, so getting a few a day might be a good idea or does it steal too much from valuable bitcoins?
2, is it safe to run a b2 3 module on 355 in a fully hosted datacenter with 20 degrees airconditioned space?
3, is there a simple way, to share payments among many addresses automatically? (a pool that splits payments automatically)
4, why should i choose btcguild or any of the famous pools above eligius? Btcguild is 3%, and eligius is free, but takes a while to pay out, however, 3% is not peanuts!

Appreciate any answers you could provide.

[PsychoticBoy]

Few questions. (if there is an faq, please direct me)
1, Mutliple coin mining, i remember seeing a pool, which mines namecoins and litecoins along with bitcoins on the avalon.
Would it be any idea to do so? i mean, namecoins and litecoins are currently cheap, so getting a few a day might be a good idea or does it steal too much from valuable bitcoins?
2, is it safe to run a b2 3 module on 355 in a fully hosted datacenter with 20 degrees airconditioned space?
3, is there a simple way, to share payments among many addresses automatically? (a pool that splits payments automatically)
4, why should i choose btcguild or any of the famous pools above eligius? Btcguild is 3%, and eligius is free, but takes a while to pay out, however, 3% is not peanuts!

Appreciate any answers you could provide.

Mining Namecoin/Bitcoin and Litecoin at the same time is Impossible!

Namecoin and Bitcoin are sha-256 based chains and can be merged minined, Litecoin on the other hand is scrypt based and can never be mined at the same time as Bitcoin nor can it be mined by FPGA`s or ASIC`s like an Avalon.

[driksson]

Few questions. (if there is an faq, please direct me)
1, Mutliple coin mining, i remember seeing a pool, which mines namecoins and litecoins along with bitcoins on the avalon.
Would it be any idea to do so? i mean, namecoins and litecoins are currently cheap, so getting a few a day might be a good idea or does it steal too much from valuable bitcoins?
2, is it safe to run a b2 3 module on 355 in a fully hosted datacenter with 20 degrees airconditioned space?
3, is there a simple way, to share payments among many addresses automatically? (a pool that splits payments automatically)
4, why should i choose btcguild or any of the famous pools above eligius? Btcguild is 3%, and eligius is free, but takes a while to pay out, however, 3% is not peanuts!

Appreciate any answers you could provide.

Mining Namecoin/Bitcoin and Litecoin at the same time is Impossible!

Namecoin and Bitcoin are sha-256 based chains and can be merged minined, Litecoin on the other hand is scrypt based and can never be mined at the same time as Bitcoin nor can it be mined by FPGA`s or ASIC`s like an Avalon.

OKay, what does this  site talk about then? its quite famous to use the slushpool from what i read?
http://mining.bitcoin.cz/
it says it does namecoin+bitcoin for extra revenue..

[nanobit]

Regarding the size of PSU, I had 3 module Asic running for a week with 750w PSU. After that the PSU died (it was almost new).
Now, I know some people here have been saying that 750W is too small PSU, even for the 3 module unit. Clearly that is the case, I just couldn't believe it. So be mindful of this when choosing PSU's.

[lastbit]

Regarding the size of PSU, I had 3 module Asic running for a week with 750w PSU. After that the PSU died (it was almost new).
Now, I know some people here have been saying that 750W is too small PSU, even for the 3 module unit. Clearly that is the case, I just couldn't believe it. So be mindful of this when choosing PSU's.

750W is OK.
From time to time hardware breaks, especially when running near max specs continuously.

[SolarSilver]

Mining Namecoin/Bitcoin and Litecoin at the same time is Impossible!

Namecoin and Bitcoin are sha-256 based chains and can be merged minined, Litecoin on the other hand is scrypt based and can never be mined at the same time as Bitcoin nor can it be mined by FPGA`s or ASIC`s like an Avalon.

OKay, what does this  site talk about then? its quite famous to use the slushpool from what i read?
http://mining.bitcoin.cz/
it says it does namecoin+bitcoin for extra revenue..

That is exactly what PsychoticBoy states: you can mine both NMC and BTC at the same time (BTCguild does it too) but you can't mix BTC and LTC as they use a different algo for the proof of work

[-ck]

after 20h I have
[Device Hardware%] => 1.6749
Is this OK?
[Firmware Version] => 20130821

What does ASIC-README say about avalon-auto ?

[S M I L Y]

@ckolivas   Are you doing anything to cap the system at 450Mhz?   Im running stable at 450 but as soon as I bump to 451Mhz it fails to start mining?

PS: I am running at 1336mv and watercooled...


Thanks!

[-ck]

@ckolivas   Are you doing anything to cap the system at 450Mhz?   Im running stable at 450 but as soon as I bump to 451Mhz it fails to start mining?

PS: I am running at 1336mv and watercooled...


Thanks!

You're running stable at 450? Amazing... Yes there is a cap at 450 in the code.

[S M I L Y]

Yes perfectly stable .49% hw error at 41c Batch3

could you lift that 450 limit easily?

Thanks!

[-ck]

Sure can.