Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[chup]

Good day.

For several years I have been using Claymore's Dual Ethereum on ATI 280, I’m happy with everything and devfee was always on. I respect the work of others and ready to pay for it. I am using hiveos for mining Music and Pirl. But for a month and a half, when switching to devfee Claymore's is turned off with an error of out of memory for Dag file creation. My rigs goes to reboot. I lose five to seven minutes to restart rigs. Could you please fix devfee in the next versions or turn it off for video cards with a small amount of memory eg not only 2GB but 3GB too.
Anyway, DAG will soon grow to 4GB and I think you have to do something with it. Maybe you will switch devfee to a coin with a little DAG for these cards?

Thanks, WBR

In this situation "-nofee 1" switch would slow down Your hashrate for 2% (4%-2%devfee), but prevent reboot downtime.

[1714934944]

1714934944

[zzeleznez]

chup for example 72.5MHs vs 75.5MHs = -4% for me and +0% for developer. Exactly I'm talking about - with such scenarios we lose all.

[chup]

chup for example 72.5MHs vs 75.5MHs = -4% for me and +0% for developer. Exactly I'm talking about - with such scenarios we lose all.

zzeleznez it's -2% for You and -2% for Dev. Seems to me that -2% is better than rigs restarting.

[ManDoneKTM]

is this ´´ project ´´ dead ¿¿

[Manos24]

Hi! Not able to mine ETH with GTX 1060s 3GB anymore? I am on windows 7 64bit

[NiklasFalk]

Hi! Not able to mine ETH with GTX 1060s 3GB anymore? I am on windows 7 64bit

Currently epoch 230(2.80GB), so if there are Windows tricks to handle the DAG files (increase page file etc) there are most probably info about it, at many places.

I can mine with 3GB cards using Linux for some more time. I forgot the epoch value when Etherium Classic stopped working (Was it 231 or 237? damn that I did not wrote that somewhere).

[nick_fc]

Hi! Not able to mine ETH with GTX 1060s 3GB anymore? I am on windows 7 64bit

Currently epoch 230(2.80GB), so if there are Windows tricks to handle the DAG files (increase page file etc) there are most probably info about it, at many places.

I can mine with 3GB cards using Linux for some more time. I forgot the epoch value when Etherium Classic stopped working (Was it 231 or 237? damn that I did not wrote that somewhere).

DO NOT REBOOT YOUR rigs WITH 3GB CARDS IF THEY ARE STILL MINING - YOU WILL RECEIVE DAG FILE ERROR AFTER REBOOT
I have 3 rigs. 2 were rebooted on ETH DAG#229 and stopped mining. The third one was working nice until today it was rebooted. After reboot - DAG error
I used -eres 0 command in claymore and it helped. But I think in epoch #231 it will stop again

[FFI2013]

Is anyone still mining with r9 390 if so what are your hashrate I'm only getting 25 which I could swear I was getting 30 awhile back, maybe I'll switch back to blockchain beta drivers

[adaseb]

Is anyone still mining with r9 390 if so what are your hashrate I'm only getting 25 which I could swear I was getting 30 awhile back, maybe I'll switch back to blockchain beta drivers

I am getting the same issues with my R9 290. I started noticing the hashrate decrease about 6 months ago. Seems its a DAG thrashing issue like with the R9 280X and the RX series before the AMD issued the fix. However the blockchain drivers make no difference with the R9 290 only the RX 470/570.

Nothing you can do really. AMD won't issue a fix because they are old GPUs and they probably want miners to buy the newer GPUs instead.

Due to this bug, its no longer profitable mining with these GPUs.

[sefirotius]

hi all me need help bat file for nvidia 1060 3gb how to write it Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v11.9

[maxpower666]

Is anyone still mining with r9 390 if so what are your hashrate I'm only getting 25 which I could swear I was getting 30 awhile back, maybe I'll switch back to blockchain beta drivers

I am getting the same issues with my R9 290. I started noticing the hashrate decrease about 6 months ago. Seems its a DAG thrashing issue like with the R9 280X and the RX series before the AMD issued the fix. However the blockchain drivers make no difference with the R9 290 only the RX 470/570.

Nothing you can do really. AMD won't issue a fix because they are old GPUs and they probably want miners to buy the newer GPUs instead.

Due to this bug, its no longer profitable mining with these GPUs.

same problem here, 290X - now i have only 22MH/s at stock and 26.7MH/s with big overclock and nothing helps
i remember i got around 30MH/s before year

maybe bios change to 390x could help?

[Simpson84]

I`ve got a problem with one of 1080Ti. Rig has 4 of them but only one has a problem. Here the log (I`ve replace wallet address with x):

Code:

2018.12.18:13:01:34.069: main Phoenix Miner 4.0b Windows/msvc - Release build
2018.12.18:13:01:34.069: main Cmd line: -coin eth -pool ssl://eu1.ethermine.org:5555 -wal x -proto 3 -cdm 1 -gpus 2 -eres 0 
2018.12.18:13:01:34.311: main CUDA version: 10.0, CUDA runtime: 8.0
2018.12.18:13:01:34.407: main No OpenCL platforms found
2018.12.18:13:01:34.407: main Available GPUs for mining:
2018.12.18:13:01:34.407: main GPU1: GeForce GTX 1080 Ti (pcie 2), CUDA cap. 6.1, 11 GB VRAM, 28 CUs
2018.12.18:13:01:34.410: main NVML library initialized
2018.12.18:13:01:34.465: main Nvidia driver version: 417.35
2018.12.18:13:01:35.268: main Eth: Loading pools from epools.txt
2018.12.18:13:01:35.268: main Eth: Invalid wallet 'YourWallet.AM4' specified for pool 1 from epools.txt. Replace with a real wallet
2018.12.18:13:01:35.268: main Eth: Invalid wallet 'YourWallet.AM4' specified for pool 2 from epools.txt. Replace with a real wallet
2018.12.18:13:01:35.268: main Eth: the pool list contains 1 pool (1 from command-line)
2018.12.18:13:01:35.268: main Eth: primary pool: ssl://eu1.ethermine.org:5555
2018.12.18:13:01:35.268: main Starting GPU mining
2018.12.18:13:01:35.268: wdog Starting watchdog thread
2018.12.18:13:01:35.707: main Eth: Connecting to ethash pool ssl://eu1.ethermine.org:5555 (proto: QtMiner)
2018.12.18:13:01:35.731: eths Eth: Connected to SSL ethash pool eu1.ethermine.org:5555 (172.65.207.106)
2018.12.18:13:01:35.787: eths Eth: Send: {"id":1,"jsonrpc":"2.0","method":"eth_login","params":["0x88ce024cd3b60af4e0eec5c30147dde7be0540c6.AM4"]}

2018.12.18:13:01:35.876: eths Eth: Received: {"id":1,"jsonrpc":"2.0","result":true}
2018.12.18:13:01:35.877: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2018.12.18:13:01:35.918: main Listening for CDM remote manager at port 3333 in read-only mode
2018.12.18:13:01:35.919: main GPU1: 37C 43%
2018.12.18:13:01:35.924: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":["0xb72dc697806dd2bf90f5096b7dccd0c0773581a5e564d1eb331828c6a19a5383","0x86551490879e95ff6ca429bb8c14e83d7063a872071818ef4ecf45377c0d5363","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x696af5"]}
2018.12.18:13:01:35.925: eths Eth: New job #b72dc697 from ssl://eu1.ethermine.org:5555; diff: 4000MH
2018.12.18:13:01:35.925: GPU1 GPU1: Starting up... (0)
2018.12.18:13:01:35.926: GPU1 GPU1: Generating ethash light cache for epoch #230
2018.12.18:13:01:38.669: GPU1 Light cache generated in 2.7 s (16.3 MB/s)
2018.12.18:13:01:38.872: GPU1 GPU1: Allocating DAG for epoch #230 (2.80) GB
2018.12.18:13:01:38.972: GPU1 GPU1: Allocating light cache buffer (44.7) MB; good for epoch up to #230
2018.12.18:13:01:39.095: GPU1 GPU1: Generating DAG for epoch #230
2018.12.18:13:01:40.872: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2018.12.18:13:01:41.778: GPU1 CUDART error in CudaProgram.cu:205 : unknown error (30)
2018.12.18:13:01:41.780: GPU1 GPU1 initMiner error: unknown error
2018.12.18:13:01:47.199: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2018.12.18:13:01:47.199: wdog Thread(s) not responding. Restarting.
2018.12.18:13:01:47.199: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

I try to use -eres 0, -lidag 3 and nothing helps. After reboot GPU seems to be ok but after start mining GPU is going down and always receive this error

CUDART error in CudaProgram.cu:205 : unknown error (30)

Claymore also crashes. In afterburner also disappears stat info. I`ve also trying to install latest nVidia Drivers and Phoenix Miner but it also doesn`t helped.

Does anyone have any ideas?

[RivAngE]

I`ve got a problem with one of 1080Ti. Rig has 4 of them but only one has a problem. Here the log (I`ve replace wallet address with x):

I try to use -eres 0, -lidag 3 and nothing helps. After reboot GPU seems to be ok but after start mining GPU is going down and always receive this error

CUDART error in CudaProgram.cu:205 : unknown error (30)

Claymore also crashes. In afterburner also disappears stat info. I`ve also trying to install latest nVidia Drivers and Phoenix Miner but it also doesn`t helped.

Does anyone have any ideas?

Just use Ethminer (https://github.com/ethereum-mining/ethminer/releases), I've tried 0.17.0 rc2 and I'm very happy with it, try it yourself.
No point in using Claymore's miner which hasn't been updated since July.

[TEMAndroid]

Hi!
Just upgraded to lastest AMD drivers for Ubuntu 18.04.01 - amdgpu-pro-18.50-708488-ubuntu-18.04
4.15.0-43-generic #46-Ubuntu SMP Thu Dec 6 14:45:28 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
And have Segmentation fault with Claymore 11.9
Can u fix it?

[Simpson84]

Just use Ethminer (https://github.com/ethereum-mining/ethminer/releases), I've tried 0.17.0 rc2 and I'm very happy with it, try it yourself.
No point in using Claymore's miner which hasn't been updated since July.

Doesn`t helped ( Receive this error:

Code:

Error CUDA mining: CUDA error in func ethash_generate_dag at line 124 unknown error

[nick_fc]

I`ve got a problem with one of 1080Ti. Rig has 4 of them but only one has a problem. Here the log (I`ve replace wallet address with x):

Code:

2018.12.18:13:01:34.069: main Phoenix Miner 4.0b Windows/msvc - Release build
2018.12.18:13:01:34.069: main Cmd line: -coin eth -pool ssl://eu1.ethermine.org:5555 -wal x -proto 3 -cdm 1 -gpus 2 -eres 0 
2018.12.18:13:01:34.311: main CUDA version: 10.0, CUDA runtime: 8.0
2018.12.18:13:01:34.407: main No OpenCL platforms found
2018.12.18:13:01:34.407: main Available GPUs for mining:
2018.12.18:13:01:34.407: main GPU1: GeForce GTX 1080 Ti (pcie 2), CUDA cap. 6.1, 11 GB VRAM, 28 CUs
2018.12.18:13:01:34.410: main NVML library initialized
2018.12.18:13:01:34.465: main Nvidia driver version: 417.35
2018.12.18:13:01:35.268: main Eth: Loading pools from epools.txt
2018.12.18:13:01:35.268: main Eth: Invalid wallet 'YourWallet.AM4' specified for pool 1 from epools.txt. Replace with a real wallet
2018.12.18:13:01:35.268: main Eth: Invalid wallet 'YourWallet.AM4' specified for pool 2 from epools.txt. Replace with a real wallet
2018.12.18:13:01:35.268: main Eth: the pool list contains 1 pool (1 from command-line)
2018.12.18:13:01:35.268: main Eth: primary pool: ssl://eu1.ethermine.org:5555
2018.12.18:13:01:35.268: main Starting GPU mining
2018.12.18:13:01:35.268: wdog Starting watchdog thread
2018.12.18:13:01:35.707: main Eth: Connecting to ethash pool ssl://eu1.ethermine.org:5555 (proto: QtMiner)
2018.12.18:13:01:35.731: eths Eth: Connected to SSL ethash pool eu1.ethermine.org:5555 (172.65.207.106)
2018.12.18:13:01:35.787: eths Eth: Send: {"id":1,"jsonrpc":"2.0","method":"eth_login","params":["0x88ce024cd3b60af4e0eec5c30147dde7be0540c6.AM4"]}

2018.12.18:13:01:35.876: eths Eth: Received: {"id":1,"jsonrpc":"2.0","result":true}
2018.12.18:13:01:35.877: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2018.12.18:13:01:35.918: main Listening for CDM remote manager at port 3333 in read-only mode
2018.12.18:13:01:35.919: main GPU1: 37C 43%
2018.12.18:13:01:35.924: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":["0xb72dc697806dd2bf90f5096b7dccd0c0773581a5e564d1eb331828c6a19a5383","0x86551490879e95ff6ca429bb8c14e83d7063a872071818ef4ecf45377c0d5363","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x696af5"]}
2018.12.18:13:01:35.925: eths Eth: New job #b72dc697 from ssl://eu1.ethermine.org:5555; diff: 4000MH
2018.12.18:13:01:35.925: GPU1 GPU1: Starting up... (0)
2018.12.18:13:01:35.926: GPU1 GPU1: Generating ethash light cache for epoch #230
2018.12.18:13:01:38.669: GPU1 Light cache generated in 2.7 s (16.3 MB/s)
2018.12.18:13:01:38.872: GPU1 GPU1: Allocating DAG for epoch #230 (2.80) GB
2018.12.18:13:01:38.972: GPU1 GPU1: Allocating light cache buffer (44.7) MB; good for epoch up to #230
2018.12.18:13:01:39.095: GPU1 GPU1: Generating DAG for epoch #230
2018.12.18:13:01:40.872: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2018.12.18:13:01:41.778: GPU1 CUDART error in CudaProgram.cu:205 : unknown error (30)
2018.12.18:13:01:41.780: GPU1 GPU1 initMiner error: unknown error
2018.12.18:13:01:47.199: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2018.12.18:13:01:47.199: wdog Thread(s) not responding. Restarting.
2018.12.18:13:01:47.199: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

I try to use -eres 0, -lidag 3 and nothing helps. After reboot GPU seems to be ok but after start mining GPU is going down and always receive this error

CUDART error in CudaProgram.cu:205 : unknown error (30)

Claymore also crashes. In afterburner also disappears stat info. I`ve also trying to install latest nVidia Drivers and Phoenix Miner but it also doesn`t helped.

Does anyone have any ideas?

Do you have 3gb or 6gb 1060 cards?
Try claymore with "-eres 0" parameter

[Simpson84]

Do you have 3gb or 6gb 1060 cards?
Try claymore with "-eres 0" parameter

The fact of the matter is that no. I`ve got rig with 4 1080Ti and this problem is only with one card, the others are ok. I try all possible flags and nothing helps. I`ve found this solution

Code:

Nvidia Control Panel -> 3D Settings -> Set PhysX configuration -> Select a Physx processor -> choose your graphics card instead of leaving it on auto-select. 

but I can`t open nVidia Control Panel, it`s doesn`t opens (((

[ZombieWorm]

but I can`t open nVidia Control Panel, it`s doesn`t opens (((

You need a display attached.

[Breesus]

hey guys, got a weird one today.

We built a new mining rig with rx 470 4GB (MSI Gaming X, Samsung memory and yeah, we're lucky enough to have free electricity), we copied the 1500 memory straps from 1500 to 2000 (like we always do), but for some odd reason we can't OC our cards memory above 1850Mhz without having the good old GPU#X got incorrect share etc... which means our cards are stuck around 27.2Mh/s.

You guys got any idea what the problem might be ? We have downvolted anything yet so our cards are definitely not power starved, I'm just a bit confused.

[big_daddy]

hey guys, got a weird one today.

We built a new mining rig with rx 470 4GB (MSI Gaming X, Samsung memory and yeah, we're lucky enough to have free electricity), we copied the 1500 memory straps from 1500 to 2000 (like we always do), but for some odd reason we can't OC our cards memory above 1850Mhz without having the good old GPU#X got incorrect share etc... which means our cards are stuck around 27.2Mh/s.

You guys got any idea what the problem might be ? We have downvolted anything yet so our cards are definitely not power starved, I'm just a bit confused.

First of all, you have free elec
Even if those cards are doing 15Mh/s youll have good profit...

But ok

What is your config? Win ver., driver ver., etc