Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[big_daddy]

are both cards bios modded or not, what drivers are you using and please, copypaste here the bat file into the

Code:

cmd /K start /B EthDcrMiner64.exe -epool eu.sparkpool.com:3333 -ewal 0xd79745d8e38d6cE337956a7c57f7C9d343ae7057 -eworker NOM_DU_WORKER -epsw x
pause

Yes modded with ATIFlash_284 and PolarisBiosEditorMaster

pilote: 24.20.11016.4

bios is BIOS Part Number
113-2E366FU-O53

Core Clock
1340 MHz

do you have the GPUz installed on your PC? to see if both cards are bios modded, cause I think that you have only one modded

[freak1]

Some of my rigs has begun to close the miner right after the pool is defined. If i plug a screen/or dummy in the onbard GPU (and therefore enabling it) it work fine.

It even do it on my gamer PC with a screen connected to the GPU (GTX 1080ti) very annoying that i have to have a dummy in the onboard gpu giving me a screen i can't control.

I see it on Asus mb B250 mining exptert, Asus Strix Z370 and Asus Strix Z270 with diffrent CPUs, all with Nvidia GPU. Any suggestions to running without the dummy?

Try to set "max performance" in "Intel(R) Graphic Power Plan ..." @ Power Option...Advanced settings

It already is.

Download and install the latest driver for the Intel onboard GPU.

THANK YOU! it worked like a charm

[Hoemas]

do you have the GPUz installed on your PC? to see if both cards are bios modded, cause I think that you have only one modded
[/quote]



Yes i have what do you want ?  it's all the same

http://gpuz.techpowerup.com/18/10/23/p96.png



And why i've nothing at my wallet (MEW) after 10 days of mining ?

EDIT: first paiement 0.1ETH 10 hours ago

[raske]

do you have the GPUz installed on your PC? to see if both cards are bios modded, cause I think that you have only one modded



Yes i have what do you want ?  it's all the same





And why i've nothing at my wallet (MEW) after 10 days of mining ?

EDIT: first paiement 0.1ETH 10 hours ago

I see where is your problem
if the cards are modded you have to use the blockchain driver, not the last one

use the DDU to uninstall the drivers and isntall this https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx

hope that will help

 

[crypper]

I see where is your problem
if the cards are modded you have to use the blockchain driver, not the last one

That's just a total BS - stop trolling the guy. Don't use blockchain driver - it's buggy. Use one of the recent drivers (it's never a good idea to use THE most recent one).

But that's really funny that @Hoemas has RX570 and gpu-z shows RX 580. Was it the same before modding bios and patching? I wonder if it's the driver patcher glitch Two things I could think of regarding low hash rate (given that compute mode is "on"): 1. Not enough power, 2. you screwed up during bios mod. Flash the original bios back and start from there.... see if the cards behave as they should

[raske]

I see where is your problem
if the cards are modded you have to use the blockchain driver, not the last one

That's just a total BS - stop trolling the guy. Don't use blockchain driver - it's buggy. Use one of the recent drivers (it's never a good idea to use THE most recent one).

But that's really funny that @Hoemas has RX570 and gpu-z shows RX 580. Was it the same before modding bios and patching? I wonder if it's the driver patcher glitch Two things I could think of regarding low hash rate (given that compute mode is "on"): 1. Not enough power, 2. you screwed up during bios mod. Flash the original bios back and start from there.... see if the cards behave as they should

I'm not trolling here anyone...
is how I am setting up my GPUs - AMD ofcourse

If they are bios modded (pached and so on) I am using the blockchain driver
If they are stock bios, than through the AMD global settings I put them one by one in the "compute mode" and use the last stable driver

and have no problem at all

maybe can be a virtual memory issue, this could be also a questionmark

[crypper]

I see where is your problem
if the cards are modded you have to use the blockchain driver, not the last one

That's just a total BS - stop trolling the guy. Don't use blockchain driver - it's buggy. Use one of the recent drivers (it's never a good idea to use THE most recent one).

But that's really funny that @Hoemas has RX570 and gpu-z shows RX 580. Was it the same before modding bios and patching? I wonder if it's the driver patcher glitch Two things I could think of regarding low hash rate (given that compute mode is "on"): 1. Not enough power, 2. you screwed up during bios mod. Flash the original bios back and start from there.... see if the cards behave as they should

I'm not trolling here anyone...
is how I am setting up my GPUs - AMD ofcourse

If they are bios modded (pached and so on) I am using the blockchain driver
If they are stock bios, than through the AMD global settings I put them one by one in the "compute mode" and use the last stable driver

and have no problem at all

maybe can be a virtual memory issue, this could be also a questionmark

In this case you are doing it wrong and teaching others to do it wrong. Also you clearly state "you have to use the blockchain driver". No you don't have to.

[raske]

I see where is your problem
if the cards are modded you have to use the blockchain driver, not the last one

That's just a total BS - stop trolling the guy. Don't use blockchain driver - it's buggy. Use one of the recent drivers (it's never a good idea to use THE most recent one).

But that's really funny that @Hoemas has RX570 and gpu-z shows RX 580. Was it the same before modding bios and patching? I wonder if it's the driver patcher glitch Two things I could think of regarding low hash rate (given that compute mode is "on"): 1. Not enough power, 2. you screwed up during bios mod. Flash the original bios back and start from there.... see if the cards behave as they should

I'm not trolling here anyone...
is how I am setting up my GPUs - AMD ofcourse

If they are bios modded (pached and so on) I am using the blockchain driver
If they are stock bios, than through the AMD global settings I put them one by one in the "compute mode" and use the last stable driver

and have no problem at all

maybe can be a virtual memory issue, this could be also a questionmark

In this case you are doing it wrong and teaching others to do it wrong. Also you clearly state "you have to use the blockchain driver". No you don't have to.

wrong or not, it works for me
over and out.

[Skol600ml]

Hi,

That OhGodAnETHlargementPill thing works with the latest version? There is another way to get better hashrate with 1080ti?

[xunl]

It's epoch 219 now. For about 4.8 days, the epoch will increase by 1 and the duration is getting shorter. So it's about 1 year left before reaching the curreent claymore 11.9 limit, epoch 299. Will Mr claymore provides at least one update to increase the epoch limit by then? Assuming ethereum keep delaying releases and defering difficulty bomb like now.

[tg88]

It's epoch 219 now. For about 4.8 days, the epoch will increase by 1 and the duration is getting shorter. So it's about 1 year left before reaching the curreent claymore 11.9 limit, epoch 299. Will Mr claymore provides at least one update to increase the epoch limit by then? Assuming ethereum keep delaying releases and defering difficulty bomb like now.

If devs migrate to ProgPow this will not be necessary, do not worry so much about Epoch.

[adaseb]

It's epoch 219 now. For about 4.8 days, the epoch will increase by 1 and the duration is getting shorter. So it's about 1 year left before reaching the curreent claymore 11.9 limit, epoch 299. Will Mr claymore provides at least one update to increase the epoch limit by then? Assuming ethereum keep delaying releases and defering difficulty bomb like now.

The DAG is actually higher for ETC classic and there is no difficulty bomb there so most likely it will reach DAG 299 much faster.

I am assuming since Claymore still charges a fee for this miner he will make the necessary updates as time goes along.

Regarding ProgPOW I wouldn't bet on it because the talk about it has been sparse and most of the devs rather concentrate on POS and sharding than GPU mining profitability.

[Link1n]

hi all!
plz help me. I have rig 3*7950 (3gb) and 1*280x (3gb) Windows 7
Every 20 minutes miner restart after attempting to connect the commission.
https://preview.ibb.co/bFiTJA/2.jpg

[big_daddy]

hi all!
plz help me. I have rig 3*7950 (3gb) and 1*280x (3gb) Windows 7
Every 20 minutes miner restart after attempting to connect the commission.

cause when starts the dev fee for Claymore, eth pool, the DAG file of ETH cannot be uploaded in your GPU, even the DAG fille size should be 2.71 GB, and you have 3GB cards, donno why you cannot start mining, but try to avoid the dev fee to see of this is the problem using the -nofee 1

[Techgtv]

hi all!
plz help me. I have rig 3*7950 (3gb) and 1*280x (3gb) Windows 7
Every 20 minutes miner restart after attempting to connect the commission.

cause when starts the dev fee for Claymore, eth pool, the DAG file of ETH cannot be uploaded in your GPU, even the DAG fille size should be 2.71 GB, and you have 3GB cards, donno why you cannot start mining, but try to avoid the dev fee to see of this is the problem using the -nofee 1

It's a windows issue. I believe the dev fee goes to regular Ethereum, and under windows you cannot mine Eth directly anymore with 3GB cards

[GasMan512]

When DAG file will be to big to use my rx 570 on ethereum?

[dumada]

When DAG file will be to big to use my rx 570 on ethereum?

That will be in about a year and half.

[Link1n]

hi all!
plz help me. I have rig 3*7950 (3gb) and 1*280x (3gb) Windows 7
Every 20 minutes miner restart after attempting to connect the commission.
https://preview.ibb.co/bFiTJA/2.jpg

cause when starts the dev fee for Claymore, eth pool, the DAG file of ETH cannot be uploaded in your GPU, even the DAG fille size should be 2.71 GB, and you have 3GB cards, donno why you cannot start mining, but try to avoid the dev fee to see of this is the problem using the -nofee 1

If I turn off the commission, the hash rate will become smaller. In this miner is it possible to specify a coin with a small dag file in the form of a commission?
As in a similar miner:
-coin <coin> Ethash coin to use for devfee to avoid switching DAGs

[tg88]

When DAG file will be to big to use my rx 570 on ethereum?

It is possible to simulate here:
https://crypt0.zone/dag-file-size/ETH/6582716

[keksik]

Sia is forking 31st october,will you release udpate for claymore to cover this fork?