Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[angryuser]

Thanks.
It works for ETH with epoch #231
but
Does not work for ETC with epoch #238
So it will not mine too long. Maybe till #233 epoch

#236 epoch, tested...

[1715242763]

1715242763

[1715242763]

1715242763

[alucard20724]

v12.0:

- zero devfee for all 2GB and 3GB cards in all operating systems.
- reduced devfee for dual mode, now it is 1%, same as for ETH-only mode.
- a bit reduced required GPU memory (both AMD and NVIDIA) so you can mine ETH a bit longer on cards that don't have enough memory.
- added version for CUDA 10.0, it is a bit faster for latest 20xx NVIDIA cards.
- a few minor bug fixes and improvements.

Linux version will be available a bit later.

is this the pre sia fork version or the forked sia version? 

[adaseb]

I guess one indicator proving that GPU mining is almost dead is the lack of replies in this thread whenever Claymore released a new version of his software.

Been over 12 hours since V12 is released and I am counting only 7 replies.

If this was a year ago, I would of had to go thru 7 pages of replies instead of 7.

Either way, Claymore thanks for keeping up the developement and reduced fees.

[alucard20724]

I guess one indicator proving that GPU mining is almost dead is the lack of replies in this thread whenever Claymore released a new version of his software.

Been over 12 hours since V12 is released and I am counting only 7 replies.

If this was a year ago, I would of had to go thru 7 pages of replies instead of 7.

Either way, Claymore thanks for keeping up the developement and reduced fees.

honestly... i did a double take when i saw the 12.0 version... first thought was SCAM, but then i looked over and saw it was the correct claymore thread.  

I am happy that there is an update.

[Claymore]

I guess one indicator proving that GPU mining is almost dead is the lack of replies in this thread whenever Claymore released a new version of his software.

Been over 12 hours since V12 is released and I am counting only 7 replies.

If this was a year ago, I would of had to go thru 7 pages of replies instead of 7.

Either way, Claymore thanks for keeping up the developement and reduced fees.

honestly... i did a double take when i saw the 12.0 version... first thought was SCAM, but then i looked over and saw it was the correct claymore thread.  

I am happy that there is an update.

I cannot moderate anything, so the only way is to be careful and press "Report to moderator" when you see an attempt of scamming/phishing.

PS. I will release Linux version within a few hours.

[Claymore]

v12.0 for Linux is available for downloading too.

[Mr Duong]

v12.0:

- zero devfee for all 2GB and 3GB cards in all operating systems.
- reduced devfee for dual mode, now it is 1%, same as for ETH-only mode.
- a bit reduced required GPU memory (both AMD and NVIDIA) so you can mine ETH a bit longer on cards that don't have enough memory.
- added version for CUDA 10.0, it is a bit faster for latest 20xx NVIDIA cards.
- a few minor bug fixes and improvements.

Linux version will be available a bit later.

oh funny No fee for VGA 2G 3G cannot mining ETH,ETC

[sxemini]

v12.0:

- zero devfee for all 2GB and 3GB cards in all operating systems.
- reduced devfee for dual mode, now it is 1%, same as for ETH-only mode.
- a bit reduced required GPU memory (both AMD and NVIDIA) so you can mine ETH a bit longer on cards that don't have enough memory.
- added version for CUDA 10.0, it is a bit faster for latest 20xx NVIDIA cards.
- a few minor bug fixes and improvements.

Linux version will be available a bit later.

oh funny No fee for VGA 2G 3G cannot mining ETH,ETC

You can mine other coins like callisto with this cards 

[FFI2013]

I guess one indicator proving that GPU mining is almost dead is the lack of replies in this thread whenever Claymore released a new version of his software.

Been over 12 hours since V12 is released and I am counting only 7 replies.

If this was a year ago, I would of had to go thru 7 pages of replies instead of 7.

Either way, Claymore thanks for keeping up the developement and reduced fees.

No I think it's everyone is either running phoenixminer or finminer because miners who where loyal and called out anyone who tried to go around claymore's dev have been asking for a update for months now with no reply same as his CN miner

[xelbyb]

v12.0 for Linux is available for downloading too.

for xmr can you expect from you?

[miner582]

Merry Christmas everyone,

First, thanks to Claymore for this new update.

Second and last, why people talk about loyalty, I am still using claymore in all my rigs, if the market is not good enough right now this is a complete different issue, so I appreciatte all you guys keep in crypto world.

Regards

[mu_enrico]

Dear oh lord @Claymore, please support ProgPow.. hopefully with all previous cards (both AMD and NVIDIA) supported.
Me still using your software, happily pay for dev fee.
This is my Christmas wish!

[br2459]

I second that ProPow. Will help us small miner keep competitive.

[Frizz23]

what do you mine in dual guys?

[big_daddy]

what do you mine in dual guys?

Still waiting for a good dual perspective one
Cause, ruining gpus with dual and paying more elec bills is not so smart thing to do in this bear

[Frizz23]

what do you mine in dual guys?

Still waiting for a good dual perspective one
Cause, ruining gpus with dual and paying more elec bills is not so smart thing to do in this bear

I used to do xvg back in the day, turned out great cause of herbalife style followers and the huge pump.
But these days, I just dont know...

[Breesus]

hey guys, got a weird one today.

We built a new mining rig with rx 470 4GB (MSI Gaming X, Samsung memory and yeah, we're lucky enough to have free electricity), we copied the 1500 memory straps from 1500 to 2000 (like we always do), but for some odd reason we can't OC our cards memory above 1850Mhz without having the good old GPU#X got incorrect share etc... which means our cards are stuck around 27.2Mh/s.

You guys got any idea what the problem might be ? We have downvolted anything yet so our cards are definitely not power starved, I'm just a bit confused.

First of all, you have free elec
Even if those cards are doing 15Mh/s youll have good profit...

But ok

What is your config? Win ver., driver ver., etc

Yeah, I'm definitely not complaining about our situation (the rig belongs to me and my brother), I just thought I could squeeze a lil bit more out of our cards since I saw a lot of people having around 30mh/s with the same cards.


So we're using Windows 10 (with the latest update), the latest Claymore version as well and the latest stable AMD drivers (18.12.2). In terms of hardware we are using :

ASrock H81 Pro BTC 2.0
4GB of DDR3
a 1000W Aerocool Gold+ PSU
a Celeron G1840 CPU
and of course 6* MSI Gaming X RX 470@4GB

I managed to slightly increase the memory clock to 1860Mhz but I can't go beyond that.

those cards are bios modded or you are using an afterburner to set the clocks?

Hey and sorry for the late reply (Xmas and stuff!). We tried to things:

1. No bios mod, we simply increased the clocks and we ended up with ~25Mh/s with the clocks around 2050Mhz but with a shit ton of GPU#x got incorrect shares

2. We then bios mod the card ourselves (using Polaris Bios Editor), copying the 1500 strap values from 1500 to 2000. (we also tried with the 1750 values from 1750 to 2000 as well), and this is the situation where we are at at the moment, with 27.2Mh/s and a few GPU errors here and there on our GPU2.

This is our rig stats btw: https://ethermine.org/miners/f6c10F2CB2A2161efb43e4e0eabee60629329d5a/dashboard

Any advices would be much appreciated !

[big_daddy]

hey guys, got a weird one today.

We built a new mining rig with rx 470 4GB (MSI Gaming X, Samsung memory and yeah, we're lucky enough to have free electricity), we copied the 1500 memory straps from 1500 to 2000 (like we always do), but for some odd reason we can't OC our cards memory above 1850Mhz without having the good old GPU#X got incorrect share etc... which means our cards are stuck around 27.2Mh/s.

You guys got any idea what the problem might be ? We have downvolted anything yet so our cards are definitely not power starved, I'm just a bit confused.

First of all, you have free elec
Even if those cards are doing 15Mh/s youll have good profit...

But ok

What is your config? Win ver., driver ver., etc

Yeah, I'm definitely not complaining about our situation (the rig belongs to me and my brother), I just thought I could squeeze a lil bit more out of our cards since I saw a lot of people having around 30mh/s with the same cards.


So we're using Windows 10 (with the latest update), the latest Claymore version as well and the latest stable AMD drivers (18.12.2). In terms of hardware we are using :

ASrock H81 Pro BTC 2.0
4GB of DDR3
a 1000W Aerocool Gold+ PSU
a Celeron G1840 CPU
and of course 6* MSI Gaming X RX 470@4GB

I managed to slightly increase the memory clock to 1860Mhz but I can't go beyond that.

those cards are bios modded or you are using an afterburner to set the clocks?

Hey and sorry for the late reply (Xmas and stuff!). We tried to things:

1. No bios mod, we simply increased the clocks and we ended up with ~25Mh/s with the clocks around 2050Mhz but with a shit ton of GPU#x got incorrect shares

2. We then bios mod the card ourselves (using Polaris Bios Editor), copying the 1500 strap values from 1500 to 2000. (we also tried with the 1750 values from 1750 to 2000 as well), and this is the situation where we are at at the moment, with 27.2Mh/s and a few GPU errors here and there on our GPU2.

This is our rig stats btw: https://ethermine.org/miners/f6c10F2CB2A2161efb43e4e0eabee60629329d5a/dashboard

Any advices would be much appreciated !

try the driver versions 18.xxxx
and with the compute patcher turn all the gpus in one shot to the compute mode and share if you get better results

[king_pin]

Weirdly enough a few days ago a couple of my 4GB GPUs (380/480) started saying there is not enough memory for DAG creation. Claymore's new v12 fixed that, but I it makes me wonder what the problem was?
The rigs are running Win10, Beta-Blockchain drivers and something like 4 out of ~50 4G rigs had this issue... wtf

[big_daddy]

Weirdly enough a few days ago a couple of my 4GB GPUs (380/480) started saying there is not enough memory for DAG creation. Claymore's new v12 fixed that, but I it makes me wonder what the problem was?
The rigs are running Win10, Beta-Blockchain drivers and something like 4 out of ~50 4G rigs had this issue... wtf

same issue here
and the answer was only the v.12, talking on ETH mining, the other daggerhashimoto coins was rurring without any problems on the previous clay version