Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Avionica]

add this at the beginning of your start bat file

Code:

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

I tried it...
usually my file looks like this

TIMEOUT 30

SET GPU_FORCE_64BIT_PTR=0
SET GPU_MAX_HEAP_SIZE=100
SET GPU_USE_SYNC_OBJECTS=1
SET GPU_MAX_ALLOC_PERCENT=100
SET GPU_SINGLE_ALLOC_PERCENT=100

TIMEOUT 10

EthDcrMiner64.exe config_solo.txt
PAUSE

Could there be a problem in the drivers? can deliver 19.x.x?

[NubyS]

Is it possible to set up the miner (.bat) file to mine on more then one address from a single .bat file?
Let's say i have 1 rig with 7 GPU-s and i want 4 of them to mine on one address and 3 on another?

[lttsi]

I got a big problem ,my rig 8x p106 (ram Samsung) after 3-5 min run Claymore all VGA got a 0 mb/s .
OC setting :Power +75 .-100 core ,+500 mem .
Testing with claymore 14.5 ,14.6 .(-starp 1)

[Avionica]

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

Code:

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

thanks, I solved the problem
exe file was run as administrator, and the settings remained in another window from the bat file
in the end, they were not used
now everything works

[sxemini]

Is it possible to set up the miner (.bat) file to mine on more then one address from a single .bat file?
Let's say i have 1 rig with 7 GPU-s and i want 4 of them to mine on one address and 3 on another?

Code:

@echo off
start "Wallet One" "C:\Claymore Wallet One\EthDcrMiner64.exe" 
start "Wallet Two" "C:\Claymore Wallet Two\EthDcrMiner64.exe"

-di 0123 and -mport 0 @ Claymore Wallet One @ config.txt
-di 456 and -mport 0 @ Claymore Wallet Two @ config.txt

Why -mport 0? you must use two different ports for monitoring. For example 3333 and 3334. 0 makes no sense to me.
And why 2 folders?

Make two .bat files and start it seperate or start this two .bat files with a extra start.bat.

[questen]

EthDcrMiner64.exe -epool stratum+tcp://eu1-etc.ethermine.org:4444 -ewal X -eworker X -epsw x -esm 0 -dcri 8 -strap POL8S1,POL4H1,POL4H1,POL4E1 -rxboost 1 -allcoins etc -allpools 1 -estale 0 -ethi 6 -mode 1 -tt 1 -ttli 75 -etha 0 -r 0 -retrydelay 10 -dbg -1
pause

2 x Radeon™ RX 470 G1 Gaming 4G - 30 mh Hynix
1 x Radeon RX 470 ARMOR 8G OC - 29,8 mh Samsung
1 x Sapphire NITRO+ RX 480 OC 4 GB - 30 mh Elpida

Bios is not flashed, as from the factory.
Driver - Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23

Core 1130 Mem 2000  MSI Afterburner 4.6.2 Beta 1

[RuMiner]

@Claymore,

-logfile logs\
-logsmaxsize 100

combination is not working still in 14.6. Miner doesn't clean logs folder different from root

[big_daddy]

EthDcrMiner64.exe -epool stratum+tcp://eu1-etc.ethermine.org:4444 -ewal X -eworker X -epsw x -esm 0 -dcri 8 -strap POL8S1,POL4H1,POL4H1,POL4E1 -rxboost 1 -allcoins etc -allpools 1 -estale 0 -ethi 6 -mode 1 -tt 1 -ttli 75 -etha 0 -r 0 -retrydelay 10 -dbg -1
pause

2 x Radeon™ RX 470 G1 Gaming 4G - 30 mh Hynix
1 x Radeon RX 470 ARMOR 8G OC - 29,8 mh Samsung
1 x Sapphire NITRO+ RX 480 OC 4 GB - 30 mh Elpida

Bios is not flashed, as from the factory.
Driver - Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23

Core 1130 Mem 2000  MSI Afterburner 4.6.2 Beta 1

have you tried the last driver version? it was less Mh/s or not tested at all?

[questen]

EthDcrMiner64.exe -epool stratum+tcp://eu1-etc.ethermine.org:4444 -ewal X -eworker X -epsw x -esm 0 -dcri 8 -strap POL8S1,POL4H1,POL4H1,POL4E1 -rxboost 1 -allcoins etc -allpools 1 -estale 0 -ethi 6 -mode 1 -tt 1 -ttli 75 -etha 0 -r 0 -retrydelay 10 -dbg -1
pause

2 x Radeon™ RX 470 G1 Gaming 4G - 30 mh Hynix
1 x Radeon RX 470 ARMOR 8G OC - 29,8 mh Samsung
1 x Sapphire NITRO+ RX 480 OC 4 GB - 30 mh Elpida

Bios is not flashed, as from the factory.
Driver - Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23

Core 1130 Mem 2000  MSI Afterburner 4.6.2 Beta 1

have you tried the last driver version? it was less Mh/s or not tested at all?

I'll post a new test soon

[questen]

EthDcrMiner64.exe -epool stratum+tcp://eu1-etc.ethermine.org:4444 -ewal X -eworker X -epsw x -esm 0 -dcri 9 -strap 1,2,2,3 -rxboost 1 -allcoins etc -allpools 1 -estale 0 -ethi 6 -mode 1 -fanmin 50 -fanmax 57 -tt 60 -ttli 70 -cvddc 900 -mvddc 900 -cclock 1150 -mclock 2000,2000,2000,2000 -etha 0 -r 0 -retrydelay 10 -dbg -1
pause

2 x Radeon™ RX 470 G1 Gaming 4G - 30 mh Hynix
1 x Radeon RX 470 ARMOR 8G OC - 30 mh Samsung
1 x Sapphire NITRO+ RX 480 OC 4 GB - 30 mh Elpida

ALL 121Mh   computemode on, Without MSI Afterburner

Bios is not flashed, as from the factory.
Driver - win10-64bit-radeon-software-adrenalin-2019-edition-19.5.2-may22

[TomaszD]

1)

Nvidia cards have "-strap 1" ... "-strap 6" values (1...3 are normal straps and 4...6 are low-intensity straps).

OK, but...

Use this option to adjust strap intensity for Nvidia cards if even straps with lowest intensity ("-strap 1" and "-strap 4") are unstable on your cards

So 1,2,3 are normal straps, 4,5,6 are low intensity straps, but lowest intensity straps are 1 and 4? Either something here doesn't make sense or I'm missing something.

2)

I'm unable to set different "sintensity" values for 8 cards (e.g. -sintensity 20,20,20,20,1,20,20,20), says it's an unrecognized command.

3)

If there is an internal straps database for direct selection, do we have to guess the values in the database? What value do I input for Micron memory on a 1060? If it's divided by memory capacity of 4 and 8GB, what about a 1060 6GB?

[Bojcha]

EthDcrMiner64.exe -epool stratum+tcp://eu1-etc.ethermine.org:4444 -ewal X -eworker X -epsw x -esm 0 -dcri 9 -strap 1,2,2,3 -rxboost 1 -allcoins etc -allpools 1 -estale 0 -ethi 6 -mode 1 -fanmin 50 -fanmax 57 -tt 60 -ttli 70 -cvddc 900 -mvddc 900 -cclock 1150 -mclock 2000,2000,2000,2000 -etha 0 -r 0 -retrydelay 10 -dbg -1
pause

2 x Radeon™ RX 470 G1 Gaming 4G - 30 mh Hynix
1 x Radeon RX 470 ARMOR 8G OC - 30 mh Samsung
1 x Sapphire NITRO+ RX 480 OC 4 GB - 30 mh Elpida

ALL 121Mh   computemode on, Without MSI Afterburner

Bios is not flashed, as from the factory.
Driver - win10-64bit-radeon-software-adrenalin-2019-edition-19.5.2-may22

You also need to set separate mem clocks. Depend on strap.. Hynix4gb around 2020, Samsung8gb 2000-2200, and elpida 1980-2100.

[iRrromka]

HELP!

My wires are overheated!

Using 430.86 Nvidia drivers with 14.6 Clay and -powlim -30 option I've got "gpu 0 nvidia powlim set failed" message in the log file. Energy consumption is above 150 watts (asus 1078).

With previous drivers version it was about 109-115 watts. WTF?

[br2459]

HELP!

My wires are overheated!

Using 430.86 Nvidia drivers with 14.6 Clay and -powlim -30 option I've got "gpu 0 nvidia powlim set failed" message in the log file. Energy consumption is above 150 watts (asus 1078).

With previous drivers version it was about 109-115 watts. WTF?

If you use Afterburner, set power target to 70% to help with load. All of my NVIDIA rigs are set to 70% and run fine.

If the wires are hot it may mean you have a bad riser/power connector. Consider replacing them if the power target doesn't solve your problem.

[iRrromka]

HELP!

My wires are overheated!

If you use Afterburner, set power target to 70%

No, I don't. I use Clay command line options. Does anybody have such a problem?

[SLcharger]

Use GPU Tweak II, instead of command line in Claymore.

https://www.asus.com/us/site/graphics-cards/gpu-tweak-ii/

In my experience it work better than Claymore.
Set power to 65%.

Considder :
Create a *.bat file and load delay 90 sec GPU Tweak II.
Create a shortcut.

Ad to startup file, together with shortcut to start.bat for Claymore.

This creates auto start, makes life more easy.

[newtan]

Just comeback  :)to Claymore 14.6 . The screen flashes and closes imediately. Log file show:

07:34:56:240   1590   Check and remove old log files...
07:34:56:241   1590   args: -epool eu1-etc.ethermine.org:5555 -ewal 0x32865c2bf42041c9093974df4412264cce6ed711 -epsw x -platform 1 -rxboost 1
07:34:56:241   1590   
07:34:56:241   1590   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
07:34:56:241   1590   º                Claymore's Dual GPU Miner - v14.6               º
07:34:56:241   1590   º              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             º
07:34:56:242   1590   º                       Supercharged Edition                     º
07:34:56:242   1590   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
07:34:56:242   1590   
07:34:56:243   1590   b735
07:34:56:444   1590   ETH: 1 pool is specified
07:34:56:444   1590   Main Ethereum pool is eu1-etc.ethermine.org:5555
07:34:56:444   1590   DCR: 0 pool is specified

My rig is RX570 4g.
Anyone know this isuse please help.
Thanks!

DDU and install again...

Thanks for your reply. Done it but it still closes right after starts.

[SLcharger]

Just comeback  :)to Claymore 14.6 . The screen flashes and closes imediately. Log file show:

07:34:56:240   1590   Check and remove old log files...
07:34:56:241   1590   args: -epool eu1-etc.ethermine.org:5555 -ewal 0x32865c2bf42041c9093974df4412264cce6ed711 -epsw x -platform 1 -rxboost 1
07:34:56:241   1590   
07:34:56:241   1590   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
07:34:56:241   1590   º                Claymore's Dual GPU Miner - v14.6               º
07:34:56:241   1590   º              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             º
07:34:56:242   1590   º                       Supercharged Edition                     º
07:34:56:242   1590   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
07:34:56:242   1590   
07:34:56:243   1590   b735
07:34:56:444   1590   ETH: 1 pool is specified
07:34:56:444   1590   Main Ethereum pool is eu1-etc.ethermine.org:5555
07:34:56:444   1590   DCR: 0 pool is specified

My rig is RX570 4g.
Anyone know this isuse please help.
Thanks!

DDU and install again...

Thanks for your reply. Done it but it still closes right after starts.

I missed that you use 14.6 I can't get that to work on a mixed rig ( Asrock H110 ) either. Still need to figure out why it crashes when it try to load RXboost. Without RXboost, it runs perfect, 8 AMD + 5 GTX 1070.

[newtan]

I missed that you use 14.6 I can't get that to work on a mixed rig ( Asrock H110 ) either. Still need to figure out why it crashes when it try to load RXboost. Without RXboost, it runs perfect, 8 AMD + 5 GTX 1070.
[/quote]
You are right, my rig is Asrock H110. Try remove RXboost no works either.
Maybe later version work?

[big_daddy]

EthDcrMiner64.exe -epool stratum+tcp://eu1-etc.ethermine.org:4444 -ewal X -eworker X -epsw x -esm 0 -dcri 9 -strap 1,2,2,3 -rxboost 1 -allcoins etc -allpools 1 -estale 0 -ethi 6 -mode 1 -fanmin 50 -fanmax 57 -tt 60 -ttli 70 -cvddc 900 -mvddc 900 -cclock 1150 -mclock 2000,2000,2000,2000 -etha 0 -r 0 -retrydelay 10 -dbg -1
pause

2 x Radeon™ RX 470 G1 Gaming 4G - 30 mh Hynix
1 x Radeon RX 470 ARMOR 8G OC - 30 mh Samsung
1 x Sapphire NITRO+ RX 480 OC 4 GB - 30 mh Elpida

ALL 121Mh   computemode on, Without MSI Afterburner

Bios is not flashed, as from the factory.
Driver - win10-64bit-radeon-software-adrenalin-2019-edition-19.5.2-may22

I’m seen here that the straps « 2 » are for the G1 Hynix, what gpu is connected to strap 1 and what to strap 3?