Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[dongorgon]

Using awesome miner. Attempting to make changes to claymore, using command line, in the interface makes no changes to the hash rate. Help would be appreciated.

1x1070Ti
3x1070
Awesome Miner free version
MSI Afterburner in use (changes here do affect hash rate)

Thanks.

[ustcstone]

Hi,claymore,my only one windows rig with 8x 588s worked great on 14.5 with 1140/2170 -stap 2 -rxboost,180+hours with very few R and I,thanks for your great work.

I think stap 2 is very good for eth,but most my rigs are using hivos,the timing i'm using can't handle more than 2100,it's faster and good for xmr,but not so good for eth,so i'm wondering if you can share the -strap 2 timing so i cant flash it in to the bios? Because there is no -stap in linux version..

the VRAM is Samsung K4G80325FB

[paintblack]

14.6 dont work for my r9 390. same hashrates 12 and 14.6. 

[br2459]

Help me pls...

Use claymore 11.9 - many rigs - all ok
Use claymore 14.6 - default "start.bat" for test (rig - 6x474 samsung, blockchain drivers, page file - 70 Gb, RAM 4 Gb):
not enough GPU memory to place DAG, you cannot mine this coin with this GPU
OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

What are 474 cards? Is that RX470? or is that some other special card for mining?

[fredeq]

Hi NOOB here
Does anyone know of any secret ETH miners as whattomine now shows 80mh for vega 64. They show 90 for radeon vii and are usually accurate about this stuff.
The max I can do is 47.5  on a vega 64 with rare incorrects
I am not sure if this is an error or some new information that we should all know

Thank you

Code introducing VII started to multiply v64 hashrate by accident.
Bug fixed now, thanks for sharing!

[big_daddy]

Help me pls...

Use claymore 11.9 - many rigs - all ok
Use claymore 14.6 - default "start.bat" for test (rig - 6x474 samsung, blockchain drivers, page file - 70 Gb, RAM 4 Gb):
not enough GPU memory to place DAG, you cannot mine this coin with this GPU
OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

What are 474 cards? Is that RX470? or is that some other special card for mining?

It is RX470 4GB.

add this at the beginning of your start bat file

Code:

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

[Avionica]

add this at the beginning of your start bat file

Code:

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

I tried it...
usually my file looks like this

TIMEOUT 30

SET GPU_FORCE_64BIT_PTR=0
SET GPU_MAX_HEAP_SIZE=100
SET GPU_USE_SYNC_OBJECTS=1
SET GPU_MAX_ALLOC_PERCENT=100
SET GPU_SINGLE_ALLOC_PERCENT=100

TIMEOUT 10

EthDcrMiner64.exe config_solo.txt
PAUSE

Could there be a problem in the drivers? can deliver 19.x.x?

[NubyS]

Is it possible to set up the miner (.bat) file to mine on more then one address from a single .bat file?
Let's say i have 1 rig with 7 GPU-s and i want 4 of them to mine on one address and 3 on another?

[lttsi]

I got a big problem ,my rig 8x p106 (ram Samsung) after 3-5 min run Claymore all VGA got a 0 mb/s .
OC setting :Power +75 .-100 core ,+500 mem .
Testing with claymore 14.5 ,14.6 .(-starp 1)

[Avionica]

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

Code:

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

thanks, I solved the problem
exe file was run as administrator, and the settings remained in another window from the bat file
in the end, they were not used
now everything works

[sxemini]

Is it possible to set up the miner (.bat) file to mine on more then one address from a single .bat file?
Let's say i have 1 rig with 7 GPU-s and i want 4 of them to mine on one address and 3 on another?

Code:

@echo off
start "Wallet One" "C:\Claymore Wallet One\EthDcrMiner64.exe" 
start "Wallet Two" "C:\Claymore Wallet Two\EthDcrMiner64.exe"

-di 0123 and -mport 0 @ Claymore Wallet One @ config.txt
-di 456 and -mport 0 @ Claymore Wallet Two @ config.txt

Why -mport 0? you must use two different ports for monitoring. For example 3333 and 3334. 0 makes no sense to me.
And why 2 folders?

Make two .bat files and start it seperate or start this two .bat files with a extra start.bat.

[questen]

EthDcrMiner64.exe -epool stratum+tcp://eu1-etc.ethermine.org:4444 -ewal X -eworker X -epsw x -esm 0 -dcri 8 -strap POL8S1,POL4H1,POL4H1,POL4E1 -rxboost 1 -allcoins etc -allpools 1 -estale 0 -ethi 6 -mode 1 -tt 1 -ttli 75 -etha 0 -r 0 -retrydelay 10 -dbg -1
pause

2 x Radeon™ RX 470 G1 Gaming 4G - 30 mh Hynix
1 x Radeon RX 470 ARMOR 8G OC - 29,8 mh Samsung
1 x Sapphire NITRO+ RX 480 OC 4 GB - 30 mh Elpida

Bios is not flashed, as from the factory.
Driver - Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23

Core 1130 Mem 2000  MSI Afterburner 4.6.2 Beta 1

[RuMiner]

@Claymore,

-logfile logs\
-logsmaxsize 100

combination is not working still in 14.6. Miner doesn't clean logs folder different from root

[big_daddy]

EthDcrMiner64.exe -epool stratum+tcp://eu1-etc.ethermine.org:4444 -ewal X -eworker X -epsw x -esm 0 -dcri 8 -strap POL8S1,POL4H1,POL4H1,POL4E1 -rxboost 1 -allcoins etc -allpools 1 -estale 0 -ethi 6 -mode 1 -tt 1 -ttli 75 -etha 0 -r 0 -retrydelay 10 -dbg -1
pause

2 x Radeon™ RX 470 G1 Gaming 4G - 30 mh Hynix
1 x Radeon RX 470 ARMOR 8G OC - 29,8 mh Samsung
1 x Sapphire NITRO+ RX 480 OC 4 GB - 30 mh Elpida

Bios is not flashed, as from the factory.
Driver - Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23

Core 1130 Mem 2000  MSI Afterburner 4.6.2 Beta 1

have you tried the last driver version? it was less Mh/s or not tested at all?

[questen]

EthDcrMiner64.exe -epool stratum+tcp://eu1-etc.ethermine.org:4444 -ewal X -eworker X -epsw x -esm 0 -dcri 8 -strap POL8S1,POL4H1,POL4H1,POL4E1 -rxboost 1 -allcoins etc -allpools 1 -estale 0 -ethi 6 -mode 1 -tt 1 -ttli 75 -etha 0 -r 0 -retrydelay 10 -dbg -1
pause

2 x Radeon™ RX 470 G1 Gaming 4G - 30 mh Hynix
1 x Radeon RX 470 ARMOR 8G OC - 29,8 mh Samsung
1 x Sapphire NITRO+ RX 480 OC 4 GB - 30 mh Elpida

Bios is not flashed, as from the factory.
Driver - Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23

Core 1130 Mem 2000  MSI Afterburner 4.6.2 Beta 1

have you tried the last driver version? it was less Mh/s or not tested at all?

I'll post a new test soon

[questen]

EthDcrMiner64.exe -epool stratum+tcp://eu1-etc.ethermine.org:4444 -ewal X -eworker X -epsw x -esm 0 -dcri 9 -strap 1,2,2,3 -rxboost 1 -allcoins etc -allpools 1 -estale 0 -ethi 6 -mode 1 -fanmin 50 -fanmax 57 -tt 60 -ttli 70 -cvddc 900 -mvddc 900 -cclock 1150 -mclock 2000,2000,2000,2000 -etha 0 -r 0 -retrydelay 10 -dbg -1
pause

2 x Radeon™ RX 470 G1 Gaming 4G - 30 mh Hynix
1 x Radeon RX 470 ARMOR 8G OC - 30 mh Samsung
1 x Sapphire NITRO+ RX 480 OC 4 GB - 30 mh Elpida

ALL 121Mh   computemode on, Without MSI Afterburner

Bios is not flashed, as from the factory.
Driver - win10-64bit-radeon-software-adrenalin-2019-edition-19.5.2-may22

[TomaszD]

1)

Nvidia cards have "-strap 1" ... "-strap 6" values (1...3 are normal straps and 4...6 are low-intensity straps).

OK, but...

Use this option to adjust strap intensity for Nvidia cards if even straps with lowest intensity ("-strap 1" and "-strap 4") are unstable on your cards

So 1,2,3 are normal straps, 4,5,6 are low intensity straps, but lowest intensity straps are 1 and 4? Either something here doesn't make sense or I'm missing something.

2)

I'm unable to set different "sintensity" values for 8 cards (e.g. -sintensity 20,20,20,20,1,20,20,20), says it's an unrecognized command.

3)

If there is an internal straps database for direct selection, do we have to guess the values in the database? What value do I input for Micron memory on a 1060? If it's divided by memory capacity of 4 and 8GB, what about a 1060 6GB?

[Bojcha]

EthDcrMiner64.exe -epool stratum+tcp://eu1-etc.ethermine.org:4444 -ewal X -eworker X -epsw x -esm 0 -dcri 9 -strap 1,2,2,3 -rxboost 1 -allcoins etc -allpools 1 -estale 0 -ethi 6 -mode 1 -fanmin 50 -fanmax 57 -tt 60 -ttli 70 -cvddc 900 -mvddc 900 -cclock 1150 -mclock 2000,2000,2000,2000 -etha 0 -r 0 -retrydelay 10 -dbg -1
pause

2 x Radeon™ RX 470 G1 Gaming 4G - 30 mh Hynix
1 x Radeon RX 470 ARMOR 8G OC - 30 mh Samsung
1 x Sapphire NITRO+ RX 480 OC 4 GB - 30 mh Elpida

ALL 121Mh   computemode on, Without MSI Afterburner

Bios is not flashed, as from the factory.
Driver - win10-64bit-radeon-software-adrenalin-2019-edition-19.5.2-may22

You also need to set separate mem clocks. Depend on strap.. Hynix4gb around 2020, Samsung8gb 2000-2200, and elpida 1980-2100.

[iRrromka]

HELP!

My wires are overheated!

Using 430.86 Nvidia drivers with 14.6 Clay and -powlim -30 option I've got "gpu 0 nvidia powlim set failed" message in the log file. Energy consumption is above 150 watts (asus 1078).

With previous drivers version it was about 109-115 watts. WTF?

[br2459]

HELP!

My wires are overheated!

Using 430.86 Nvidia drivers with 14.6 Clay and -powlim -30 option I've got "gpu 0 nvidia powlim set failed" message in the log file. Energy consumption is above 150 watts (asus 1078).

With previous drivers version it was about 109-115 watts. WTF?

If you use Afterburner, set power target to 70% to help with load. All of my NVIDIA rigs are set to 70% and run fine.

If the wires are hot it may mean you have a bad riser/power connector. Consider replacing them if the power target doesn't solve your problem.