tarui
|
|
August 24, 2013, 01:56:24 AM |
|
Having some problems with the avalon again.
need some help
for some reason, the miner has been stoppping every now and then and refuses to restart mining unless i manually power down.
it was running at 350mhz for sometime and running fine. so i tried running at 355mhz but it stops every few hours so i lowered it to 350mhz
as for cooling, i've added heatsinks to the side of the case (where the main heatsinks are mounted), added thermal paste between the main heatsinks and case (the contact between the heatsinks and case) and added 2 exhaust fans
6hrs ago it stopped mining when i checked the miner's page, the time elasped was just 1min, meaning the miner had restarted a min ago. so for 6hrs, it was doing nothing?
I mean, so 1 min ago, it restarted on its own but not yet hashing?
what was it doing during the 6hrs and why isn't it restarting and hashing?
|
|
|
|
S M I L Y
Member
Offline
Activity: 113
Merit: 10
https://www.chynge.net/
|
|
August 24, 2013, 01:57:46 AM |
|
There is no reason it wouldn't start with the same settings you used previously. Try those first, and then add just --avalon-auto to the More Options box. Sometimes people are impatient and it can take it up to 2 mins before you start seeing the output from cgminer.
Its definitely not working. with the Main frequency field at 440 and the Options field as "--avalon-auto --avalon-freq 440-455 --avalon-fan 50" Waited for at least 5 min here. Adjusted only the "--avalon-freq 440-455" down to "--avalon-freq 440-450" and the system starts within 30sec. Is the an SSH command line only method I could try? Edited, kept highlighting wrong part. Frequency field set to 450 with Options at --avalon-auto < WORKS Bump frequency field to 451 < DEAD waited at least 5 minutes. API log shows "Socket connect failed: Connection refused"
|
|
|
|
-ck
Legendary
Offline
Activity: 4256
Merit: 1645
Ruu \o/
|
|
August 24, 2013, 02:00:59 AM |
|
Frequency field set to 450 with Options at --avalon-auto < WORKS
Bump frequency field to 451 < DEAD waited at least 5 minutes. API log shows "Socket connect failed: Connection refused"
Did you try it with --avalon-auto without other parameters? It might just be the web interface that doesn't allow it.
Meaning the web interface has a 450 limit even if cgminer doesn't. See what it gets to with auto without any other parameters?
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
S M I L Y
Member
Offline
Activity: 113
Merit: 10
https://www.chynge.net/
|
|
August 24, 2013, 02:11:24 AM |
|
Frequency field set to 450 with Options at --avalon-auto < WORKS
Bump frequency field to 451 < DEAD waited at least 5 minutes. API log shows "Socket connect failed: Connection refused"
Did you try it with --avalon-auto without other parameters? It might just be the web interface that doesn't allow it.
Meaning the web interface has a 450 limit even if cgminer doesn't. See what it gets to with auto without any other parameters? Blank Freq field with --avalon-auto and nothing else < DEAD
|
|
|
|
-ck
Legendary
Offline
Activity: 4256
Merit: 1645
Ruu \o/
|
|
August 24, 2013, 02:12:48 AM |
|
Frequency field set to 450 with Options at --avalon-auto < WORKS
Bump frequency field to 451 < DEAD waited at least 5 minutes. API log shows "Socket connect failed: Connection refused"
Did you try it with --avalon-auto without other parameters? It might just be the web interface that doesn't allow it.
Meaning the web interface has a 450 limit even if cgminer doesn't. See what it gets to with auto without any other parameters? Blank Freq field with --avalon-auto and nothing else < DEAD I did NOT say blank freq lol this is crazy. Use your previous settings, set 450 in frequency and then just add --avalon-auto to MoreOptions
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
S M I L Y
Member
Offline
Activity: 113
Merit: 10
https://www.chynge.net/
|
|
August 24, 2013, 02:15:50 AM |
|
Frequency field set to 450 with Options at --avalon-auto < WORKS
Bump frequency field to 451 < DEAD waited at least 5 minutes. API log shows "Socket connect failed: Connection refused"
Did you try it with --avalon-auto without other parameters? It might just be the web interface that doesn't allow it.
Meaning the web interface has a 450 limit even if cgminer doesn't. See what it gets to with auto without any other parameters? Blank Freq field with --avalon-auto and nothing else < DEAD I did NOT say blank freq lol this is crazy. Use your previous settings, set 450 in frequency and then just add --avalon-auto to MoreOptions
|
|
|
|
-ck
Legendary
Offline
Activity: 4256
Merit: 1645
Ruu \o/
|
|
August 24, 2013, 02:17:25 AM |
|
Frequency field set to 450 with Options at --avalon-auto < WORKS
Bump frequency field to 451 < DEAD waited at least 5 minutes. API log shows "Socket connect failed: Connection refused"
Did you try it with --avalon-auto without other parameters? It might just be the web interface that doesn't allow it.
Meaning the web interface has a 450 limit even if cgminer doesn't. See what it gets to with auto without any other parameters? Blank Freq field with --avalon-auto and nothing else < DEAD I did NOT say blank freq lol this is crazy. Use your previous settings, set 450 in frequency and then just add --avalon-auto to MoreOptions Right so... Like I implied a few quotes back. See what it gets to with with just those settings.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
S M I L Y
Member
Offline
Activity: 113
Merit: 10
https://www.chynge.net/
|
|
August 24, 2013, 02:26:19 AM |
|
Right so...
Like I implied a few quotes back. See what it gets to with with just those settings.
PMed you. Lets take this offline till things get working. Thanks again!
|
|
|
|
-ck
Legendary
Offline
Activity: 4256
Merit: 1645
Ruu \o/
|
|
August 24, 2013, 04:22:44 AM |
|
Right so...
Like I implied a few quotes back. See what it gets to with with just those settings.
PMed you. Lets take this offline till things get working. Thanks again! Sorted offline, running stable at 461MHz with temporary firmware reuploaded.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
wawaght
Newbie
Offline
Activity: 13
Merit: 0
|
|
August 24, 2013, 05:40:18 AM |
|
Right so...
Like I implied a few quotes back. See what it gets to with with just those settings.
PMed you. Lets take this offline till things get working. Thanks again! Sorted offline, running stable at 461MHz with temporary firmware reuploaded. --avalon-options 115200:32:10:35:400 --bitburner-voltage 1220 --avalon-temp 70 avalon batch 3 Use this command correct? --bitburner-voltage or --avalon-voltage? Extremely grateful!
|
|
|
|
GenTarkin
Legendary
Offline
Activity: 2450
Merit: 1002
|
|
August 24, 2013, 05:56:00 AM |
|
Right so...
Like I implied a few quotes back. See what it gets to with with just those settings.
PMed you. Lets take this offline till things get working. Thanks again! Sorted offline, running stable at 461MHz with temporary firmware reuploaded. --avalon-options 115200:32:10:35:400 --bitburner-voltage 1220 --avalon-temp 70 avalon batch 3 Use this command correct? --bitburner-voltage or --avalon-voltage? Extremely grateful! You cant software set avalons voltage... they have to be hardmodded for voltage...
|
|
|
|
GenTarkin
Legendary
Offline
Activity: 2450
Merit: 1002
|
|
August 24, 2013, 05:58:25 AM |
|
Right so...
Like I implied a few quotes back. See what it gets to with with just those settings.
PMed you. Lets take this offline till things get working. Thanks again! YO DUDE! Congrats on the successful OC... hows the avy miners dealing w/ the power increase? The VRM still doin good? How much power is the unit using? Wish I had the ballz to do this mod...lol ur at 108GH w/ 3 modules now, thats awesome!
|
|
|
|
wawaght
Newbie
Offline
Activity: 13
Merit: 0
|
|
August 24, 2013, 12:18:40 PM |
|
Right so...
Like I implied a few quotes back. See what it gets to with with just those settings.
PMed you. Lets take this offline till things get working. Thanks again! Sorted offline, running stable at 461MHz with temporary firmware reuploaded. --avalon-options 115200:32:10:35:400 --bitburner-voltage 1220 --avalon-temp 70 avalon batch 3 Use this command correct? --bitburner-voltage or --avalon-voltage? Extremely grateful! You cant software set avalons voltage... they have to be hardmodded for voltage... How hardmodded?
|
|
|
|
|
aneutronic
|
|
August 24, 2013, 07:09:23 PM |
|
Very impressive skill set there S M I L Y. Looking forward to more pics of the heat sink mod.
|
|
|
|
S M I L Y
Member
Offline
Activity: 113
Merit: 10
https://www.chynge.net/
|
|
August 24, 2013, 08:36:37 PM |
|
|
|
|
|
GenTarkin
Legendary
Offline
Activity: 2450
Merit: 1002
|
|
August 24, 2013, 08:39:51 PM |
|
HOLY SHIT BALLZ! ROFL 2 modules pulling that much! DAMN! Each miner pulling around 50watts! What voltage? 1.4-1.45v? Thats around 35amps through each VRM...Im surprised it can handle that!
|
|
|
|
S M I L Y
Member
Offline
Activity: 113
Merit: 10
https://www.chynge.net/
|
|
August 24, 2013, 08:53:32 PM |
|
Yea Im impressed with the VRs on this thing!!! Im running 1.336v measured under load. The sense resistor is set to 1.43v
Im going to have to hook up a 2nd 12v supply!
I wonder what the Power distribution board in the Avalon can handle??!??!
|
|
|
|
GenTarkin
Legendary
Offline
Activity: 2450
Merit: 1002
|
|
August 24, 2013, 08:57:42 PM |
|
Yea Im impressed with the VRs on this thing!!! Im running 1.336v measured under load. The sense resistor is set to 1.43v
Im going to have to hook up a 2nd 12v supply!
I wonder what the Power distribution board in the Avalon can handle??!??!
So, if you had to guess, what would be the most limiting piece on the VRM section before something burns out...
|
|
|
|
S M I L Y
Member
Offline
Activity: 113
Merit: 10
https://www.chynge.net/
|
|
August 24, 2013, 09:05:21 PM |
|
Yea Im impressed with the VRs on this thing!!! Im running 1.336v measured under load. The sense resistor is set to 1.43v
Im going to have to hook up a 2nd 12v supply!
I wonder what the Power distribution board in the Avalon can handle??!??!
So, if you had to guess, what would be the most limiting piece on the VRM section before something burns out... Assuming you keep things cool... Inductor reaching its saturation point would bring the party to an end.
|
|
|
|
|