JoseSan
Member
Offline
Activity: 117
Merit: 10
|
|
March 05, 2014, 11:14:38 PM |
|
Kinda hard writing code for 333MH and 50TH setups at the same time.
Well that piqued my curiosity...
|
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4256
Merit: 1644
Ruu \o/
|
|
March 06, 2014, 03:03:05 AM |
|
Kinda hard writing code for 333MH and 50TH setups at the same time.
Well that piqued my curiosity... Icedrill still don't have the controllers they require to run all the Sierras they're getting from hashfast. This means a LOT of devices are being attached to less controllers(PCs running cgminer), and to make matters worse, the hashfast devices don't actually ntime roll internally in their firmware the way the documentation claims, which means cgminer has to actually generate every single work item for these devices, which is usually ~2300 at a time. We found the i3 in one laptop could reliably run about 50TH of Sierras. Note that this is thousands of time more work than a pool receiving and processing 50TH of shares. ...gotta love the efficiency of well written c code.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
nowaltcoin
|
|
March 06, 2014, 09:41:30 AM |
|
Good morning
is there any way to tell cgminer (newest version) not to use some devices?
Story:
I'am using some NFY-Devices with BFGMiner. (stable for now more than 4 month) But i did not get my BiFury and Redfury running with BFGMiner so i use CGMiner for these.
The last weeks CGMiner is starting crashing constantly every 6-10 hours. (with usblib errors on alternating devices) So i downloaded the 4.0.1 Version and it is more stable (crash every 18-24 hours)
But this version is complaining about the NFY-Devices ( should consult the readme about the right usb-lib drivers for the devices)
So any hint are very welcome
|
8 * Blackarrow Prospero at Low-Voltage mining @ ckpool.org 12 * GPU's mining ETN/Sumocoin You like to mine something different: https://deutsche-emark.de/
|
|
|
kano
Legendary
Offline
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4
|
|
March 06, 2014, 09:44:32 AM |
|
Good morning
is there any way to tell cgminer (newest version) not to use some devices?
...
So any hint are very welcome
What does ./cgminer -n say? You may be able to ignore them with --usb
|
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4256
Merit: 1644
Ruu \o/
|
|
March 06, 2014, 09:47:04 AM |
|
But this version is complaining about the NFY-Devices ( should consult the readme about the right usb-lib drivers for the devices)
Every single USB device on cgminer uses exactly the same USB driver. Crashes should never happen, and any debugging would be most appreciated as per: http://ck.kolivas.org/apps/cgminer/debug/README-debugIf you're not interested in helping the developers debug issues with the software you're depending on for free, feel free to read how to use the --usb command (as Kano has suggested) from the readme, to choose only the devices you want it to work on.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
nowaltcoin
|
|
March 06, 2014, 09:51:40 AM |
|
Good morning
is there any way to tell cgminer (newest version) not to use some devices?
...
So any hint are very welcome
What does ./cgminer -n say? You may be able to ignore them with --usb failed to open USB DEV4 - DEV13 err -12 Thanks for helping!
|
8 * Blackarrow Prospero at Low-Voltage mining @ ckpool.org 12 * GPU's mining ETN/Sumocoin You like to mine something different: https://deutsche-emark.de/
|
|
|
nowaltcoin
|
|
March 06, 2014, 09:54:33 AM |
|
But this version is complaining about the NFY-Devices ( should consult the readme about the right usb-lib drivers for the devices)
Every single USB device on cgminer uses exactly the same USB driver. Crashes should never happen, and any debugging would be most appreciated as per: http://ck.kolivas.org/apps/cgminer/debug/README-debugIf you're not interested in helping the developers debug issues with the software you're depending on for free, feel free to read how to use the --usb command (as Kano has suggested) from the readme, to choose only the devices you want it to work on. Sury i like to help..........but the problem is: Most of the times cgminer crashes when i'am on work (the rig is at home) or in the night when i'am sleeping so i could only see the windows hint (cgminer applikation has an error and has to be closed) So just tell me how i can help ! stay tuned
|
8 * Blackarrow Prospero at Low-Voltage mining @ ckpool.org 12 * GPU's mining ETN/Sumocoin You like to mine something different: https://deutsche-emark.de/
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4256
Merit: 1644
Ruu \o/
|
|
March 06, 2014, 09:58:27 AM |
|
But this version is complaining about the NFY-Devices ( should consult the readme about the right usb-lib drivers for the devices)
Every single USB device on cgminer uses exactly the same USB driver. Crashes should never happen, and any debugging would be most appreciated as per: http://ck.kolivas.org/apps/cgminer/debug/README-debugIf you're not interested in helping the developers debug issues with the software you're depending on for free, feel free to read how to use the --usb command (as Kano has suggested) from the readme, to choose only the devices you want it to work on. Sury i like to help..........but the problem is: Most of the times cgminer crashes when i'am on work (the rig is at home) or in the night when i'am sleeping so i could only see the windows hint (cgminer applikation has an error and has to be closed) So just tell me how i can help ! stay tuned Well I already gave you a link to the instructions on how to help... but by far the easiest thing for you to do is just mine with everything on cgminer as the NF1 devices as they're called by cgminer are fully supported, and you set them up exactly as you set up every other USB device you've used so far on cgminer so it's about 10 seconds' work.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
FalconFly
Sr. Member
Offline
Activity: 252
Merit: 250
Sentinel
|
|
March 06, 2014, 10:00:10 AM |
|
Good morning
is there any way to tell cgminer (newest version) not to use some devices?
Story:
I'am using some NFY-Devices with BFGMiner. (stable for now more than 4 month) But i did not get my BiFury and Redfury running with BFGMiner so i use CGMiner for these.
The last weeks CGMiner is starting crashing constantly every 6-10 hours. (with usblib errors on alternating devices) So i downloaded the 4.0.1 Version and it is more stable (crash every 18-24 hours)
But this version is complaining about the NFY-Devices ( should consult the readme about the right usb-lib drivers for the devices)
So any hint are very welcome
I ran into a similar problem (3x BlueFury v2 and 1x BiFury). The RAM usage of cgminer (any version) keeps creeping up on me and at some point (some 400-500MB usage) it will eventually crash. My solution that worked for me so far : Installed CGwatcher and set it up simply to auto-restart cgminer every 6 hours and in case it quits/crashes otherwise or drops below a certain threshhold (i.e. a USB device dropped offline). Except for one single occasion in ~2 months, the system ran without issues ever since (after otherwise crashing almost daily, typically overnight or when I was a work )
|
This forum signature is like its owner - it can't be bought
|
|
|
nowaltcoin
|
|
March 06, 2014, 10:08:01 AM |
|
But this version is complaining about the NFY-Devices ( should consult the readme about the right usb-lib drivers for the devices)
Every single USB device on cgminer uses exactly the same USB driver. Crashes should never happen, and any debugging would be most appreciated as per: http://ck.kolivas.org/apps/cgminer/debug/README-debugIf you're not interested in helping the developers debug issues with the software you're depending on for free, feel free to read how to use the --usb command (as Kano has suggested) from the readme, to choose only the devices you want it to work on. Sury i like to help..........but the problem is: Most of the times cgminer crashes when i'am on work (the rig is at home) or in the night when i'am sleeping so i could only see the windows hint (cgminer applikation has an error and has to be closed) So just tell me how i can help ! stay tuned Well I already gave you a link to the instructions on how to help... but by far the easiest thing for you to do is just mine with everything on cgminer as the NF1 devices as they're called by cgminer are fully supported, and you set them up exactly as you set up every other USB device you've used so far on cgminer so it's about 10 seconds' work. Ok i will try out your link these evening at home. Yes i can move the NF1 devices to cgminer but the crashing of it will be the same and i do not have access to my home-rig any given time (so that will cost a lot of hashpower for me). Debugging cgminer and having it stable and than moving the NF1 to it would be my preferable way
|
8 * Blackarrow Prospero at Low-Voltage mining @ ckpool.org 12 * GPU's mining ETN/Sumocoin You like to mine something different: https://deutsche-emark.de/
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4256
Merit: 1644
Ruu \o/
|
|
March 06, 2014, 10:10:27 AM |
|
Ok i will try out your link these evening at home.
Yes i can move the NF1 devices to cgminer but the crashing of it will be the same and i do not have access to my home-rig any given time (so that will cost a lot of hashpower for me).
Debugging cgminer and having it stable and than moving the NF1 to it would be my preferable way
Unless the crashing is because the software is fighting over the device in which case it will go away.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4256
Merit: 1644
Ruu \o/
|
|
March 06, 2014, 10:12:35 AM |
|
Guys, if you get a crash, debugging information will help everyone long term since that's how I'll actually get to fix the bugs. This is not a closed source proprietary piece of hidden software, it is a community project despite the fact there are only a very small number of developers, and we need information from the users as much as they need our code. While I'm forever developing code for new features and drivers, I am seriously interested in stability over anything else. My rigs run for months without a crash and that's how I want it to be for the other users, but I don't have all hardware combinations on all operating systems (nor do I even want that). I've debugged a LOT of issues courtesy of debug traces, logins into other people's machines and bug reports and so on that would never have been fixed otherwise.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
nowaltcoin
|
|
March 06, 2014, 10:16:59 AM |
|
Ok i will try out your link these evening at home.
Yes i can move the NF1 devices to cgminer but the crashing of it will be the same and i do not have access to my home-rig any given time (so that will cost a lot of hashpower for me).
Debugging cgminer and having it stable and than moving the NF1 to it would be my preferable way
Unless the crashing is because the software is fighting over the device in which case it will go away. I tried Version 3.8.5/3.9/3.12.3 ----> these version did not complain about NF1-Devices (but maybee fighting anyway for that devices) the charm of the NF1 devices (you do not need a spezial driver for it for BFGMiner) they will be install as a USB-Hid devices by windows 7 and BFGMiner just grab them.
|
8 * Blackarrow Prospero at Low-Voltage mining @ ckpool.org 12 * GPU's mining ETN/Sumocoin You like to mine something different: https://deutsche-emark.de/
|
|
|
-ck (OP)
Legendary
Offline
Activity: 4256
Merit: 1644
Ruu \o/
|
|
March 06, 2014, 10:24:17 AM |
|
Ok i will try out your link these evening at home.
Yes i can move the NF1 devices to cgminer but the crashing of it will be the same and i do not have access to my home-rig any given time (so that will cost a lot of hashpower for me).
Debugging cgminer and having it stable and than moving the NF1 to it would be my preferable way
Unless the crashing is because the software is fighting over the device in which case it will go away. I tried Version 3.8.5/3.9/3.12.3 ----> these version did not complain about NF1-Devices (but maybee fighting anyway for that devices) the charm of the NF1 devices (you do not need a spezial driver for it for BFGMiner) they will be install as a USB-Hid devices by windows 7 and BFGMiner just grab them. That is not charm, everything uses the WinUSB driver on windows on cgminer - you install one driver for everything and just associate it with your device if you ever get a different type of device. Saying a driver happens to work for a piece of software is not really something special... And coincidentally, I happen to have all the devices you're describing. 0: NF1 0: | 2.577G/2.565Gh/s | A: 16140 R: 0 HW: 0 WU: 35.9/m 3: NF1 1: | 2.111G/2.099Gh/s | A: 8070 R: 0 HW: 0 WU: 29.4/m 4: BXF 0: 44.8C | 5.036G/5.010Gh/s | A: 52596 R: 0 HW: 0 WU: 70.2/m 8: BF1 0: | 2.368G/2.368Gh/s | A: 15375 R: 0 HW: 1640 WU: 33.1/m
And they all work fine on my rig. Once the drivers are set up on cgminer, you can plug and unplug as many of those same devices as you like and cgminer will hotplug and unplug them without any further intervention.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
nowaltcoin
|
|
March 06, 2014, 10:43:57 AM |
|
Hi
ok i will do like i did for the BiFury and redfury.
I will install the winusb-driver with zadig to point to the nanofurys and will than have all devices in the 4.0.1 Cgminer Then we can see if it crashes again, if so i will send you the debug information! D'accord ?
stay tuned
|
8 * Blackarrow Prospero at Low-Voltage mining @ ckpool.org 12 * GPU's mining ETN/Sumocoin You like to mine something different: https://deutsche-emark.de/
|
|
|
nowaltcoin
|
|
March 06, 2014, 06:05:04 PM |
|
up and running with all devices did not get the --nfu-bits working in cgminer.conf so i give it in commandline Now i have to have a look whats about the hashpower compare to bfgminer and how long it will run thanks for help
|
8 * Blackarrow Prospero at Low-Voltage mining @ ckpool.org 12 * GPU's mining ETN/Sumocoin You like to mine something different: https://deutsche-emark.de/
|
|
|
d574kerr
Newbie
Offline
Activity: 1
Merit: 0
|
|
March 06, 2014, 09:29:45 PM |
|
Im trying to get a mining rig for under $1000 is that possible?
|
|
|
|
nowaltcoin
|
|
March 06, 2014, 10:28:59 PM |
|
cgminer 4.1.0 crashed.... (and i hoped not) after 7 hours... something with bxf1 usb-lib device is already in use.
I installed the debugger and the debugger version (4.0.0 i hope that does not matter) and wait for the next crash...
Have a nice night
|
8 * Blackarrow Prospero at Low-Voltage mining @ ckpool.org 12 * GPU's mining ETN/Sumocoin You like to mine something different: https://deutsche-emark.de/
|
|
|
kano
Legendary
Offline
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4
|
|
March 06, 2014, 10:48:51 PM |
|
Im trying to get a mining rig for under $1000 is that possible?
RPi, powered USB hub, ASIC USB thumb ... under $100 ? Though it is a waste of time and money ... it costs more BTC than it will ever mine
|
|
|
|
coretechs
Donator
Sr. Member
Offline
Activity: 362
Merit: 250
|
|
March 07, 2014, 02:55:40 AM |
|
EDIT: Also, cpu usage by cgminer seems to have greatly increased. I noticed these things with two machines running Windows 7.
I wanted to post the same observation. I've been upgrading every few releases and had been on 3.8-3.9 for a long time with a few BFL units. In 3.9 the CPU usually averages around 15%-16%. Going to 4.0.1 the CPU usage slowly increases and levels off at ~35%. Ubuntu 12.04.4 x64, 3.11 kernel, gcc 4.6.3 CFLAGS="-O2 -Wall -march=native" ./configure --enable-bflsc
|
|
|
|
|