|
markoz
Newbie
Offline
Activity: 18
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 20, 2016, 03:35:47 PM |
|
this is what i get from suprnova when changing all rigs to v3
!!! WARNING !!! You seem to be sending a large amount of INVALID shares ! Check your rigs, you might be mining the wrong algo and your hashrate could be displayed wrong! !!! WARNING !!!
invalid shares are about 40-50%
will try v3.1
|
|
|
|
maxfunky
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 20, 2016, 03:37:47 PM |
|
What do you guys think is the best GPU I should build my rig with for dual ETH/DCR ? Tanks!
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 20, 2016, 03:50:19 PM |
|
Yes I found "eth_submitHashrate" but I'd like to check some miner that sends this command to see how it works. There is no any documentation about it but it seems it has two params: first is the hashrate, second is filled by random and it's strange, it must be worker name so pool can know who reports the hashrate.
|
|
|
|
Q_R_V
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 428
Merit: 250
Inactivity: 8963
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 20, 2016, 04:06:37 PM |
|
What do you guys think is the best GPU I should build my rig with for dual ETH/DCR ? Tanks! I would say 280x or 380x
|
|
|
|
th00ber
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 20, 2016, 04:27:20 PM |
|
Hello guys, I just write some monitoring script to dispaly a status page of my rigs running on windows. I use to mine on Linux back in 2013/2014. But from 2015 I mine on windows some Ethereum with my crossfire on desktop ... and I just bought mores cards to use a second rigs 4 months ago. And I wanted to still have the monitoring page I had in Pimp, SMOS or Kopiemtu ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) So I write it myself. (For your informations : https://forum.ethereum.org/discussion/6058/windows-monitoring/p1) First version of my windows ethereum monitoring tool My rig status page : http://vps261600.ovh.netDownload : http://vps261600.ovh.net/download/monitorig.7zHOW TO : - Download and extract - Edit the current rig config to give the miner folder and the bat file that launch it in this folder (use the edit_current_rig_config.bat and follow the exemple) - Run the start-monitoring.bat This will launch the bat file you specified for the miner in background and log the output, then start HTTP server on localhost and OpenHardwareMonitor (don't stop it or you will not be able to get the sensor informations, let it displayed or minimize it, it will become a tray icon) and then start to monitor the rig and refresh the informations (every 60sec) - You can acces HTTP server in your lan (checking everything is ok with the smartphone while on TV) or you can open a port of your router with a NAT rule to allow accessing the HTTP server from everywhere in the internet If you have multiple rigs, just run the tool on each, and don't forget to add the URL of the rigs with edit_http_rigs_list.bat. In case of dual mining, it will display ETH and DCR hashrate. This tool is compatible with ethminer, geniol-ethminer, qtminer and claymore miner but in the config file be sure you are using MINER_TYPE="claymore" or MINER_TYPE="default" Exemple of rigs list { "rigs":[ " http://192.168.1.20:9510/mining-infos.json", " http://192.168.1.21:9510/mining-infos.json" ] } Feel free to test it and let me know if you found this cool ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2F15254b2dcaab7f5478ab-24461f391e20b7336331d5789078af53.ssl.cf1.rackcdn.com%2Fethereum.vanillaforums.com%2Feditor%2Fp5%2F1kkl1rhmt66f.jpg&t=665&c=9QIBj9XJ0BYhvw)
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 20, 2016, 04:41:15 PM |
|
Hello guys, I just write some monitoring script to dispaly a status page of my rigs running on windows. I use to mine on Linux back in 2013/2014. But from 2015 I mine on windows some Ethereum with my crossfire on desktop ... and I just bought mores cards to use a second rigs 4 months ago. And I wanted to still have the monitoring page I had in Pimp, SMOS or Kopiemtu ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) So I write it myself. (For your informations : https://forum.ethereum.org/discussion/6058/windows-monitoring/p1) First version of my windows ethereum monitoring tool My rig status page : http://vps261600.ovh.netDownload : http://vps261600.ovh.net/download/monitorig.7zHOW TO : - Download and extract - Edit the current rig config to give the miner folder and the bat file that launch it in this folder (use the edit_current_rig_config.bat and follow the exemple) - Run the start-monitoring.bat This will launch the bat file you specified for the miner in background and log the output, then start HTTP server on localhost and OpenHardwareMonitor (don't stop it or you will not be able to get the sensor informations, let it displayed or minimize it, it will become a tray icon) and then start to monitor the rig and refresh the informations (every 60sec) - You can acces HTTP server in your lan (checking everything is ok with the smartphone while on TV) or you can open a port of your router with a NAT rule to allow accessing the HTTP server from everywhere in the internet If you have multiple rigs, just run the tool on each, and don't forget to add the URL of the rigs with edit_http_rigs_list.bat. In case of dual mining, it will display ETH and DCR hashrate. This tool is compatible with ethminer, geniol-ethminer, qtminer and claymore miner but in the config file be sure you are using MINER_TYPE="claymore" or MINER_TYPE="default" Exemple of rigs list { "rigs":[ " http://192.168.1.20:9510/mining-infos.json", " http://192.168.1.21:9510/mining-infos.json" ] } Feel free to test it and let me know if you found this cool ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2F15254b2dcaab7f5478ab-24461f391e20b7336331d5789078af53.ssl.cf1.rackcdn.com%2Fethereum.vanillaforums.com%2Feditor%2Fp5%2F1kkl1rhmt66f.jpg&t=665&c=9QIBj9XJ0BYhvw) this looks good - will test it out and feedback
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
bradli
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 82
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 20, 2016, 05:03:58 PM |
|
this is what i get from suprnova when changing all rigs to v3
!!! WARNING !!! You seem to be sending a large amount of INVALID shares ! Check your rigs, you might be mining the wrong algo and your hashrate could be displayed wrong! !!! WARNING !!!
invalid shares are about 40-50%
will try v3.1
same to me and i change the port put cuda stratum and looks ok much less invalid
|
|
|
|
Walrusbonzo
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 20, 2016, 05:32:42 PM |
|
Awesome work!
Up from 66.5 mh/s to 70mh/s with 1 x 7970 and 2 x 7950 single mining Eth.
Hi, im using the same cards , 2x 7950 and 1x7970 , but i get only 62mh ... Can you tell us your configs and card cloks please ? The 7970 is running at 1140/1700, one 7950 runs at 1140/1700, the other at 1190/1700. I'm finding that the "fast" algorithm is best for the 7970, but the "slow" algo is better for the two 7950. Intensity is set to 4 for the 7970 as that is a display card, this allows for little lag in using the computer, but when not being used hash rate goes up to max. The 7950s are both set to 10. Good luck EDIT: Bear in mind I'm using 1.65v on all three graphics cards to get 1700MHz on the memory clocks. I've also used a hex editor to manually change the memory timings of the three GFX card BIOS. Some of you may remember Stilt from the Litecoin mining days and the BIOS changes he could make to get more Scrypt performance, I've basically done the same thing. This really helped the 7970 as its timings were shafted, originally it was slower than the two 7950s. EDIT2: These clocks are NOT 100% stable yet, they were for Ethminer. But the PC stopped mining today, so I'm going to need to reduce clocks to regain stability. I must be close though, it survived 12 hours.
|
|
|
|
Termie
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 20, 2016, 05:51:48 PM |
|
Is there meanwhile a working way to use this miner with Coinotron? (myAccount.myWorker:Password)?
|
|
|
|
bradli
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 82
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 20, 2016, 05:57:12 PM |
|
Is there meanwhile a working way to use this miner with Coinotron? (myAccount.myWorker:Password)?
coinotron, coinmine: EthDcrMiner64.exe -epool coinotron.com:3344 -ewal Redhex.rig1 -esm 2 -epsw x -dpool http://dcr.suprnova.cc:9111 -dwal Redhex.my -dpsw x -allpools 1
|
|
|
|
Termie
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 20, 2016, 06:32:08 PM Last edit: April 20, 2016, 07:49:27 PM by Termie |
|
found this too, but didn´t work here. myAccount.myWorker:Password seems to be a problem.
Authorization failed :{"id":2,"result":null,"error":[-32600,"InvalidRequest",0}
|
|
|
|
phzi
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 20, 2016, 07:19:06 PM |
|
Yes I found "eth_submitHashrate" but I'd like to check some miner that sends this command to see how it works. There is no any documentation about it but it seems it has two params: first is the hashrate, second is filled by random and it's strange, it must be worker name so pool can know who reports the hashrate.
https://github.com/ethereum/wiki/wiki/JSON-RPC#eth_submithashrateParams: 1. Hashrate, a hexadecimal string representation (32 bytes) of the hash rate 2. ID, String - A random hexadecimal(32 bytes) ID identifying the client I am fairly sure most of the pools just ignore the ID string. Could ask dr_pra or miningpoolhub to confirm how they how they handle it.
|
|
|
|
lrdo_rvaen
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 20, 2016, 07:28:54 PM |
|
Yes I found "eth_submitHashrate" but I'd like to check some miner that sends this command to see how it works. There is no any documentation about it but it seems it has two params: first is the hashrate, second is filled by random and it's strange, it must be worker name so pool can know who reports the hashrate.
I saw hashrate in that column than i was usein eth itself to mine. E.g. eth -G And it definitly don't work with ethminer.
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 20, 2016, 08:04:47 PM |
|
found this too, but didn´t work here. myAccount.myWorker:Password seems to be a problem.
Authorization failed :{"id":2,"result":null,"error":[-32600,"InvalidRequest",0}
For password there is "-epsw" option. Don't try to put password to "-eworker", sample demonstrates it clearly.
|
|
|
|
Republic of Coin
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 20, 2016, 08:06:12 PM |
|
For the -wd watch dog function, the default is -wd 1. If I do not want the watch dog, what do I put, should that be -wd 0?
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 20, 2016, 08:06:51 PM |
|
Yes I found "eth_submitHashrate" but I'd like to check some miner that sends this command to see how it works. There is no any documentation about it but it seems it has two params: first is the hashrate, second is filled by random and it's strange, it must be worker name so pool can know who reports the hashrate.
https://github.com/ethereum/wiki/wiki/JSON-RPC#eth_submithashrateParams: 1. Hashrate, a hexadecimal string representation (32 bytes) of the hash rate 2. ID, String - A random hexadecimal(32 bytes) ID identifying the client I am fairly sure most of the pools just ignore the ID string. Could ask dr_pra or miningpoolhub to confirm how they how they handle it. Ok, but if there are many workers and they send their hashrate - how pool will detect what hashrate from what worker? Seems strange for me, that's why I'd like to see working miner with Stratum to see how it works.
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 20, 2016, 08:07:27 PM |
|
For the -wd watch dog function, the default is -wd 1. If I do not want the watch dog, what do I put, should that be -wd 0?
Yes.
|
|
|
|
Termie
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 20, 2016, 08:36:53 PM |
|
found this too, but didn´t work here. myAccount.myWorker:Password seems to be a problem.
Authorization failed :{"id":2,"result":null,"error":[-32600,"InvalidRequest",0}
For password there is "-epsw" option. Don't try to put password to "-eworker", sample demonstrates it clearly. Tried several variations, error above comes with -eworker myAccount.myWorker -epswd Password
|
|
|
|
Marvell1
Legendary
Offline
Activity: 2506
Merit: 1121
Leading Crypto Sports Betting & Casino Platform
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 20, 2016, 08:39:58 PM |
|
so after close to 24 hours i dont see an improvment on hashrate at the pool, i like the better stablity on some of my miners though but when i solo mine i dont have stability issues so I wil probbaly go back to solo mining after i get a beefier stratum host box up.
Good effort though but it seems to submit shares slower than ethminer which could be the reason for the equal hash rate ?
|
..Stake.com.. | | | ▄████████████████████████████████████▄ ██ ▄▄▄▄▄▄▄▄▄▄ ▄▄▄▄▄▄▄▄▄▄ ██ ▄████▄ ██ ▀▀▀▀▀▀▀▀▀▀ ██████████ ▀▀▀▀▀▀▀▀▀▀ ██ ██████ ██ ██████████ ██ ██ ██████████ ██ ▀██▀ ██ ██ ██ ██████ ██ ██ ██ ██ ██ ██ ██████ ██ █████ ███ ██████ ██ ████▄ ██ ██ █████ ███ ████ ████ █████ ███ ████████ ██ ████ ████ ██████████ ████ ████ ████▀ ██ ██████████ ▄▄▄▄▄▄▄▄▄▄ ██████████ ██ ██ ▀▀▀▀▀▀▀▀▀▀ ██ ▀█████████▀ ▄████████████▄ ▀█████████▀ ▄▄▄▄▄▄▄▄▄▄▄▄███ ██ ██ ███▄▄▄▄▄▄▄▄▄▄▄▄ ██████████████████████████████████████████ | | | | | | ▄▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▄ █ ▄▀▄ █▀▀█▀▄▄ █ █▀█ █ ▐ ▐▌ █ ▄██▄ █ ▌ █ █ ▄██████▄ █ ▌ ▐▌ █ ██████████ █ ▐ █ █ ▐██████████▌ █ ▐ ▐▌ █ ▀▀██████▀▀ █ ▌ █ █ ▄▄▄██▄▄▄ █ ▌▐▌ █ █▐ █ █ █▐▐▌ █ █▐█ ▀▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▀█ | | | | | | ▄▄█████████▄▄ ▄██▀▀▀▀█████▀▀▀▀██▄ ▄█▀ ▐█▌ ▀█▄ ██ ▐█▌ ██ ████▄ ▄█████▄ ▄████ ████████▄███████████▄████████ ███▀ █████████████ ▀███ ██ ███████████ ██ ▀█▄ █████████ ▄█▀ ▀█▄ ▄██▀▀▀▀▀▀▀██▄ ▄▄▄█▀ ▀███████ ███████▀ ▀█████▄ ▄█████▀ ▀▀▀███▄▄▄███▀▀▀ | | | ..PLAY NOW.. |
|
|
|
|