Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Coinseeker18]

Hi; I´m testing the las version with strap in my rig with 3 1080ti  1 1070 and 2 vegas with the pill and i have an incosistent hashrate from 200 Mh to 296 mhs. What can I do? my parameter are strap 1 for all cards intensity 33.

[evlo]

latest nvidia kernel boost (not straps but kernel!) made it on par with phoenix.
Now we need the same for polaris. Phoenix has faster kernel 1 and kernel 3, and the speed now is the same due to straps in Claymore's
If you (some way) bring those straps to phoenix it will be even faster.
For example, rx570 8gb micron 1220/2250@855mv (83watt gpu-z) is capable of 34.4mhs with such combination.

wtf, what strap are you using to get that?

[UnclWish]

in version 12.0 my rx 580 8gb asus cards work stably at 1150/2200 and give out 30.5 mh in this version in the same way. but when I put the strap function then the farm just hangs. tell me what values are better to put on my cards? The cards have the original BIOS
-----------------------------------------------------------------------------------------------------------
в вepcии 12.0 мoи кapты rx 580 8gb asus paбoтaют cтaбильнo пpи 1150/2200 и выдaют 30.5 mh в этoй вepcии тoчнo тaк жe. нo кoгдa я cтaвлю фyнкцию strap тo фepмa пpocтo зaвиcaeт. пoдcкaжитe кaкиe знaчeния лyчшe cтaвить нa мoиx кapтax? B кapтax y мeня opигинaльный биoc

Пpoбyй cнaчaлa -strap 1@2000.
Cмoтpишь cкopocть/cтaбильнocть, пoтoм пoднимaй чacтoтy -strap 1@2050, -strap 1@2100 и т.д.
Moжнo пoлyчить ycкopeниe и бeз иcпoльзoвaния cтpaпoв мaйнepa. Для этoгo пpocтo дoбaвь в cтpoкy зaпycкa -rxboost 1.

[big_daddy]

do you have to flash the cards back to bios standard or you can use the new Clay on bios modded cards too?
and is good to run the last AMD drivers?

[lexele]

my tests Claymore v14.4
1050 Ti ~ 17.7 strap 5
1060 6Gb ~ 26.5 to 27.6 strap 1 (depends on card)
1070 ~ 33.5 to 34.7 strap 1 (depends on card)
1080 ~ 44.3 strap 2 (without pill)

Any estimate of 1080 ti? I think it should be at about 48 if the basic 1080 is at 44.

I did some quick tests and got 48/49 with 1080TI while Pill gives 52@160W.
1070 arround 34@100W.

I wonder If it will be stable over night.

Are you sure about 34@100W on 1070? I mine Ethereum and one 1070 gives 33.6@110W, another 34.7@114W

Sorry for replying late,
Well it's what I read in GPU-Z and it's consistent with the read at the wall, but the 1070s are not alone on the rig so hard to say at +-10W. Power at 50% and mem +600 (Micron)

Ok, just to be sure I run the settings again and that's what I got for 1070( MSI aero and colorful, both Micvron mem):

PW:50%
Core: +220
Mem: +600
Strap: 4
33.6@95W

PW:53% same strap, core and mem
34.05@100W

[Bojcha]

Now that's something.. -rxboost

[cristian13]

Hello,
Can anyone help me into this matter ?
I have played with different AMD drivers, between 18.6.1 and 19.4.1 on all my rigs, but on two of them i am stuck here:

https://imgur.com/a/A72fj9o

Also other miner software work without problems.
All that i did is using DDU to remove 19.4.1 and installed 18.6.1. I also tried to put back 19.4.1 and its the same, can't go further "Main ethereum pool is".

[wpayton34]

Hello,
Can anyone help me into this matter ?
I have played with different AMD drivers, between 18.6.1 and 19.4.1 on all my rigs, but on two of them i am stuck here:

https://imgur.com/a/A72fj9o

Also other miner software work without problems.
All that i did is using DDU to remove 19.4.1 and installed 18.6.1. I also tried to put back 19.4.1 and its the same, can't go further "Main ethereum pool is".

whats ur command line? and what pool?

[cristian13]

Hello,
Can anyone help me into this matter ?
I have played with different AMD drivers, between 18.6.1 and 19.4.1 on all my rigs, but on two of them i am stuck here:

https://imgur.com/a/A72fj9o

Also other miner software work without problems.
All that i did is using DDU to remove 19.4.1 and installed 18.6.1. I also tried to put back 19.4.1 and its the same, can't go further "Main ethereum pool is".

whats ur command line? and what pool?

Managed to fix it. I just reinstalled iGPU drivers (Intel VGA), now it works. 

[evlo]

Hmm, i'm still having crashes with nvidia gpus even when using strap 0, these gpus worked before (using ethminer) even with much higher clocks that what i'm trying now.

Does sintensity apply to strap 0 too?

[Mroziek]

12 1060 micron (no strap) @ 635mV (little bit more efficient then pl 70)

How are you able to set low voltage like that?
In my afterburner in curve editor voltage starts from 800mv, so there is probably a different way

[evlo]

nvidiainspector, but I think there is issue wit p2 states after claymore driver hack, I think undervolting no longer applies maybe, maybe p2 disable deactivation is why i'm having issue with cards even with -sintensity 0 and -strap 0 even when these same cards worked without issue before hack

I don't know why, but on some rigs I needed to disable force p2 state, on others not, and I have issue with one gpu on 2 rigs now, so maybe this?

EDIT: hmm so force p2 state for cuda is removed from new drivers, so that is not it

[maxime506]

What kind of bug was that? The Hashrate will drop to next to 0 after some time. Happens on some of my rigs already, no GPU crashed. Driver is 19.4.1, compute mode on. Use -rxboost 1 and -strap 1




21:01:39:019   6b4   ETH - Total Speed: 73.538 Mh/s, Total Shares: 3, Rejected: 0, Time: 00:05
21:01:39:019   6b4   ETH: GPU0 14.945 Mh/s, GPU1 14.944 Mh/s, GPU2 14.953 Mh/s, GPU3 28.696 Mh/s
21:01:40:081   6b4   buf: {"id":0,"jsonrpc":"2.0","result":["0x5b93ccbeaf1615d5b55d7a2e1105331ea2e7cb8abc2780415398ceccf55f57c3","0x789121f005cf40651e361085512f0540e36453fb34ca66fbe38e2836348b9f73","0x7fd9a60121074ca47566bc6799d82cd4456f0ff830a7bf9e181e79d3"]}

21:01:40:081   6b4   ETH: 05/19/19-21:01:40 - New job from etp.2miners.com:9292
21:01:40:081   6b4   target: 0x000000007fd9a601 (diff: 8600MH), epoch 74(1.58GB)
21:01:40:081   6b4   ETH - Total Speed: 73.545 Mh/s, Total Shares: 3, Rejected: 0, Time: 00:05
21:01:40:081   6b4   ETH: GPU0 14.945 Mh/s, GPU1 14.947 Mh/s, GPU2 14.957 Mh/s, GPU3 28.696 Mh/s
21:01:44:787   1e7c   em hbt: 16, fm hbt: 16,
21:01:44:787   1e7c   watchdog - thread 0 (gpu0), hb time 4703
21:01:44:787   1e7c   watchdog - thread 1 (gpu0), hb time 4312
21:01:44:787   1e7c   watchdog - thread 2 (gpu1), hb time 4359
21:01:44:787   1e7c   watchdog - thread 3 (gpu1), hb time 4703
21:01:44:787   1e7c   watchdog - thread 4 (gpu2), hb time 4703
21:01:44:787   1e7c   watchdog - thread 5 (gpu2), hb time 4359
21:01:44:787   1e7c   watchdog - thread 6 (gpu3), hb time 4312
21:01:44:787   1e7c   watchdog - thread 7 (gpu3), hb time 4703
21:01:44:949   6b4   sent: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x3480bbe", "0x000000000000000000000000000000000000000000000000000000005121eb8e"]}

21:01:45:094   6b4   buf: {"id":6,"jsonrpc":"2.0","result":true}

21:01:45:204   6b4   ETH: checking pool connection...
21:01:45:204   6b4   sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

21:01:45:333   6b4   buf: {"id":3,"jsonrpc":"2.0","result":["0x5b93ccbeaf1615d5b55d7a2e1105331ea2e7cb8abc2780415398ceccf55f57c3","0x789121f005cf40651e361085512f0540e36453fb34ca66fbe38e2836348b9f73","0x7fd9a60121074ca47566bc6799d82cd4456f0ff830a7bf9e181e79d3"]}

21:01:49:491   1ea4   GPU0 t=47C fan=0%, GPU1 t=46C fan=0%, GPU2 t=46C fan=0%, GPU3 t=60C fan=42%
21:01:55:229   6b4   ETH: checking pool connection...
21:01:55:230   6b4   sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

21:01:55:396   6b4   buf: {"id":3,"jsonrpc":"2.0","result":["0x5b93ccbeaf1615d5b55d7a2e1105331ea2e7cb8abc2780415398ceccf55f57c3","0x789121f005cf40651e361085512f0540e36453fb34ca66fbe38e2836348b9f73","0x7fd9a60121074ca47566bc6799d82cd4456f0ff830a7bf9e181e79d3"]}

21:02:04:975   6b4   sent: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x3f0b6b", "0x000000000000000000000000000000000000000000000000000000005121eb8e"]}

21:02:05:120   6b4   buf: {"id":6,"jsonrpc":"2.0","result":true}

21:02:05:265   6b4   ETH: checking pool connection...
21:02:05:265   6b4   sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

21:02:05:411   6b4   buf: {"id":3,"jsonrpc":"2.0","result":["0x5b93ccbeaf1615d5b55d7a2e1105331ea2e7cb8abc2780415398ceccf55f57c3","0x789121f005cf40651e361085512f0540e36453fb34ca66fbe38e2836348b9f73","0x7fd9a60121074ca47566bc6799d82cd4456f0ff830a7bf9e181e79d3"]}

21:02:15:301   6b4   ETH: checking pool connection...
21:02:15:301   6b4   sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

21:02:15:431   6b4   buf: {"id":3,"jsonrpc":"2.0","result":["0x5b93ccbeaf1615d5b55d7a2e1105331ea2e7cb8abc2780415398ceccf55f57c3","0x789121f005cf40651e361085512f0540e36453fb34ca66fbe38e2836348b9f73","0x7fd9a60121074ca47566bc6799d82cd4456f0ff830a7bf9e181e79d3"]}

21:02:17:520   1e7c   em hbt: 31, fm hbt: 0,
21:02:17:520   1e7c   watchdog - thread 0 (gpu0), hb time 3328
21:02:17:520   1e7c   watchdog - thread 1 (gpu0), hb time 8187
21:02:17:520   1e7c   watchdog - thread 2 (gpu1), hb time 8187
21:02:17:520   1e7c   watchdog - thread 3 (gpu1), hb time 3328
21:02:17:520   1e7c   watchdog - thread 4 (gpu2), hb time 3328
21:02:17:520   1e7c   watchdog - thread 5 (gpu2), hb time 8187
21:02:17:520   1e7c   watchdog - thread 6 (gpu3), hb time 8187
21:02:17:520   1e7c   watchdog - thread 7 (gpu3), hb time 3328
21:02:19:349   6b4   buf: {"id":0,"jsonrpc":"2.0","result":["0x3cd8fc592c3cb07cda97b393bb121129f6760ca49903959d2b87ecff4e47addc","0x789121f005cf40651e361085512f0540e36453fb34ca66fbe38e2836348b9f73","0x7fd9a60121074ca47566bc6799d82cd4456f0ff830a7bf9e181e79d3"]}

21:02:19:444   6b4   ETH: 05/19/19-21:02:19 - New job from etp.2miners.com:9292
21:02:19:444   6b4   target: 0x000000007fd9a601 (diff: 8600MH), epoch 74(1.58GB)
21:02:19:567   6b4   ETH - Total Speed: 4.121 Mh/s, Total Shares: 3, Rejected: 0, Time: 00:05
21:02:19:698   6b4   ETH: GPU0 0.780 Mh/s, GPU1 0.780 Mh/s, GPU2 0.780 Mh/s, GPU3 1.782 Mh/s
21:02:19:845   1ea4   GPU0 t=50C fan=0%, GPU1 t=49C fan=0%, GPU2 t=49C fan=0%, GPU3 t=54C fan=33%
21:02:25:002   6b4   sent: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x3ecca2", "0x000000000000000000000000000000000000000000000000000000005121eb8e"]}

21:02:25:163   6b4   buf: {"id":6,"jsonrpc":"2.0","result":true}

21:02:25:337   6b4   ETH: checking pool connection...
21:02:25:337   6b4   sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

21:02:25:483   6b4   buf: {"id":3,"jsonrpc":"2.0","result":["0x3cd8fc592c3cb07cda97b393bb121129f6760ca49903959d2b87ecff4e47addc","0x789121f005cf40651e361085512f0540e36453fb34ca66fbe38e2836348b9f73","0x7fd9a60121074ca47566bc6799d82cd4456f0ff830a7bf9e181e79d3"]}

21:02:32:702   6b4   buf: {"id":0,"jsonrpc":"2.0","result":["0x7c83633d401594ae85b51f8fc309491da4e6cf24131570112436c278574cf72c","0x789121f005cf40651e361085512f0540e36453fb34ca66fbe38e2836348b9f73","0x7fd9a60121074ca47566bc6799d82cd4456f0ff830a7bf9e181e79d3"]}

21:02:32:702   6b4   ETH: 05/19/19-21:02:32 - New job from etp.2miners.com:9292
21:02:32:702   6b4   target: 0x000000007fd9a601 (diff: 8600MH), epoch 74(1.58GB)
21:02:32:812   6b4   ETH - Total Speed: 4.142 Mh/s, Total Shares: 3, Rejected: 0, Time: 00:06
21:02:32:957   6b4   ETH: GPU0 0.784 Mh/s, GPU1 0.784 Mh/s, GPU2 0.784 Mh/s, GPU3 1.791 Mh/s

[Blooregardqcazoo]

Same here.. Seems to have happened after using -rxboost 1 while trying different -strap values. My RX580 hangs after starting the miner now. In fact, it hangs with any other miner as well. Tried -driver uninstall, and the driver was apparently uninstalled, but the card still hangs. Not sure what to do now.

[josesosah]

i need help, i have 2 mining rigs 1 with 3 rx 580 8gb and the other with 8 rx 580 8g also, claymore its working fine with the straps on the 1 with 3 cards, on the other with 8 cards keeps freezing after installing the driver, can anybody help out? 

[adaseb]

12 1060 micron (no strap) @ 635mV (little bit more efficient then pl 70)

How are you able to set low voltage like that?
In my afterburner in curve editor voltage starts from 800mv, so there is probably a different way

I am guessing its a typo and maybe he meant 935mV. I've tried different voltages and I think its impossible to be able to run it that low and even get Windows to load.

He might get lucky and have an extremely high ASIC quality however its not possible that 635mV would be enough to mine with.

With the RX 470/570, they generally need about 120 Watts (from the wall, not including cpu+ram+mobo) to run without hardware error or hangs. If you want it to use less power you need to mine an algo like XMR which uses like  100 Watts.

[nitrobg]

12 1060 micron (no strap) @ 635mV (little bit more efficient then pl 70)

How are you able to set low voltage like that?
In my afterburner in curve editor voltage starts from 800mv, so there is probably a different way

NVIDIA Inspector command line lets you go as low as 650mV. There are guides around the internet, look it up.

[bitcoin.dbi]

Any chances to use at the same time 2 miners? (for nvidia and amd)
Whenever use second window got next message:

driver is not installed! trying to install it...
Oпepaция ycпeшнo зaвepшeнa.
driver is in use, try to start miner with -driver uninstall parameter.

So second window works only without strap command ;(

[evlo]

12 1060 micron (no strap) @ 635mV (little bit more efficient then pl 70)

How are you able to set low voltage like that?
In my afterburner in curve editor voltage starts from 800mv, so there is probably a different way

I am guessing its a typo and maybe he meant 935mV. I've tried different voltages and I think its impossible to be able to run it that low and even get Windows to load.

He might get lucky and have an extremely high ASIC quality however its not possible that 635mV would be enough to mine with.

With the RX 470/570, they generally need about 120 Watts (from the wall, not including cpu+ram+mobo) to run without hardware error or hangs. If you want it to use less power you need to mine an algo like XMR which uses like  100 Watts.

not a typo and i have replied to him, obviously amds are crap with about 1/2 efficiency per watt

in nvidia inspector you can go as low as you wish, 650mV is not as low as it will go


However after the straps I have problem on two rigs, one card is crashing on each, I have even tried settings like this
-strap 1,1,6,1,1,1,1,1,1,1,1,1 -sintensity 100,100,2,100,100,100,100,100,100,100,100,100
-strap 1,1,0,1,1,1,1,1,1,1,1,1 -sintensity 100,100,0,100,100,100,100,100,100,100,100,100
and 0 mem OC, and even disable undervolting
then cards now gets about 20MHS and still crashes, while before with ethminer or phoenix both cards could get 23 or 22mhs undervolted overclocked

Well no rig is truly stable now, but that is expected while finding new OC values, best I got was 22h58m uptime while before the straps months

Maybe just first dead GPU, but so far these things were unkillable.

[Adrian_D2705]

Will there be a Linux release soon?