Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[wekael]

Im only getting 11,6 with my rx580 here.
Im in computing mod.
I used this tool here to activate it:
https://bitcointalk.org/index.php?topic=2815803.0

after that i saw in the claymore miner that you simply can press y while its running to enable it, but it
telled me its already enabled..

My card is this here from xfx
https://www.digitec.ch/de/s1/product/xfx-rx-580-gts-xxx-edition-8gb-high-end-grafikkarte-6413013?gclsrc=aw.ds&gclid=EAIaIQobChMIjsTwx9O34gIVlQ8YCh3ZrgDiEAQYASABEgJ9ivD_BwE

must be some shitty wannabe card or something
I knew it was too cheap to be good.

EDIT:
I download the newest version and start with default settings on the default wallet for test
Windows 10 Desktop
Good RAM etc...

[1715666661]

1715666661

[1715666661]

1715666661

[1715666661]

1715666661

[1715666661]

1715666661

[1715666661]

1715666661

[1715666661]

1715666661

[noname539]

help me my gpu rx580 max M/h 14 please

https://i.hizliresim.com/QPEbYy.jpg

Have you modified your graphics card's BIOS? What memory timings and GPU/memory frequency does the graphics card have now? Your screenshot won't open. Attach a picture to the message. And it is useful to read this topic https://bitcointalk.org/index.php?topic=1954245.0

http://i64.tinypic.com/10pdesy.jpg


ı am update bıos setup

My 580 can top this lol
http://de.tinypic.com/view.php?pic=28mibdy&s=9#.XOmgyI9CSUk

Must be 32 mh

[notbatman]

help me my gpu rx580 max M/h 14 please
https://i.hizliresim.com/QPEbYy.jpg

403 Forbidden
nginx

Sorry but nginx forbids it.



@noname,

   radeon settings --> gaming --> global settings --> gpu workload --> compute

... because when you need to compute hashes for minting coins you go to the section for playing games while stuck to the outside surface of a sphere spinning 1000 mph in a vacuum, such intuitive gui design.

[wekael]

I think the problem could something be that i cant use the full power.
While mining i still can browse play videos listen music... games are laggy
but not that laggy as i would expect.

EDIT:
Another Picture of my terminal output
http://de.tinypic.com/view.php?pic=24wys6s&s=9#.XOm-r49CSUk

EDIT2:
Or could it be the mainboard?
https://www.asus.com/ch-de/Motherboards/MAXIMUS_VII_HERO/

EDIT3:
The GPU right from the website from xfx
http://www.xfxforce.com/en-us/products/amd-radeon-rx-500-series/rx-580-gts-8gb-dd-rx-580p826d6

[noname539]

help me my gpu rx580 max M/h 14 please
https://i.hizliresim.com/QPEbYy.jpg

403 Forbidden
nginx

Sorry but nginx forbids it.



@noname,

   radeon settings --> gaming --> global settings --> gpu workload --> compute

... because when you need to compute hashes for minting coins you go to the section for playing games while stuck to the outside surface of a sphere spinning 1000 mph in a vacuum, such intuitive gui design.

https://i.imgur.com/ROR1hw7.jpg

thank you bro  ı am veery happy

[dwu]

@wekael
Please accept messages from newbies in this forum's settings, maybe I can help you.

[wekael]

@wekael
Please accept messages from newbies in this forum's settings, maybe I can help you.

Ah didnt see i got it enabled sorry.
You can PM me now.

[SerpentXSF]

There are two ways to remove the "Test Mode" text in the bottom right of your screen after adding - strap and -driver.

So if the question is, "How do I remove Test Mode message" you can also use the following command, run CMD as Admin.

"bcdedit -set TESTSIGNING off"

Then reboot your system, and your good. But you can also do what was instructed in the "Readme" File

Just wanted to share, if no one else mentioned it.

[gorkemg]

I'm currently using P-106 with micron ram in my mining rigs.

With every strap settings i used  , either  used with sintensity values or not  , my hash rates fluctuates between 8-10 mhs .And eventually my rigs always crashed .

In this caps : I'm using strap 1  value. MEM +300 clock +0 .Hashrate fluctuates .

http://i67.tinypic.com/s2b593.jpg
http://i67.tinypic.com/s2b593.jpg

Does anyone have any advice with this unstability situation  with micron ram P106 cards ?

[moi162001]

Hi

Where is the latest for Linux  v14.5 and not 12  or other

thanks

[jeremyismer]

Hi

Where is the latest for Linux  v14.5 and not 12  or other

thanks

v12 is the latest for linux. The 14.x version are updates for windows. Read the rest of the forum posts and you'll see why

[Er0l]

Also try using -asm 2 gave me another 0.2mh/s

Tried it, actually i lose 0.15 Mhs per card

Did you autotune -dcri wirh -asm 2 ?
There will be new dcri values

[sereze]

I'm currently using P-106 with micron ram in my mining rigs.

With every strap settings i used  , either  used with sintensity values or not  , my hash rates fluctuates between 8-10 mhs .And eventually my rigs always crashed .

In this caps : I'm using strap 1  value. MEM +300 clock +0 .Hashrate fluctuates .

http://i67.tinypic.com/s2b593.jpg
http://i67.tinypic.com/s2b593.jpg

Does anyone have any advice with this unstability situation  with micron ram P106 cards ?

I have the same problem, my p106's goes to zero first, then miner crashes, I tried version 14.2 (Cuda 8)the same, i tried giving strp intesity of 1 to exclude P106's , becasue I have 1070 ti's in the same rig, but nothing worked

[darkCryptoMiner]

help me my gpu rx580 max M/h 14 please

https://i.hizliresim.com/QPEbYy.jpg

Use compute mode...

how to use ??

Using
-y 1 should set the GPUs to compute mode

[keksik]

Finally got 33 mh/s with RX470 - with rxboost

I have some rx470's Samsung, Elpida and Hynix, using rxboost my rigs are crashing
what driver are you using and are your cards bios modded or stock?

I use bios modded straps, not the freaky  on the fly, looks like some of the gpus already bricked with this when i go back some pages here.
Elpida and hynix the same, 32.7 to 32.9mh/s with rxboost and phoenixminer.

what rxboost are you combining here? the rxboost is on Clay or what am I missing?

Update: rx474 and rx478 sasmung custom strap very loose rxboost + phoenixminer 33,9mh/s stable for 24h now, on cöaymore its 33mh/s now

How many millions of memory errors you have in 24h ?

No errors at all, i am running very loose custom straps

hi, i can see you are using ethos and custom strap. so please can u share some info with us?
your strap if possible and what type of samsung memory?
core clock and voltage
memory clock and voltage?
How so tou arw using rxboost in linix ethos? I thought there is only claymore 12 for linix and that version doesnt have rxboost?

thank you

[DrX]

Hello,

I have issue with my rx480 mining rig, it runs before perfect, but i ahve to change ssd, and after the new win10 installation, the miner stuck after detecting pools.

I use latest win10 ltsb, asrock h81 btco pro r2.0 mobo. Onboard display is selected, and gen1 also.
I see my cards at the device manager, also installed the chipset driver, but the miner cannot start.

OverdriveNtool also detect my gpus. Change the mobo and the cpu as well, it isnt solve the issue, any idea?
I think something missing, but i dont have a clue, out of ideas

I got same problem yesterday after updating to 1803.
I had to run DDU to remove drivers and install BC drivers to get it work, it was no go for Adrenaline drivers (and AMD/ATI Pixel Clock Patcher).

DrX

What is BC drivers?
I got same problem yesterday after updating.

BC is the blockchain driver https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx
Many complain about the latest update (1803) of Microsoft. In the rigs it is mandatory to disable updates to the system and drivers of the videocard and monitor this.

Starting with 18.3.4 there no reason to go back to Blockchain drivers.
18.4.1 were bad, but 18.5.1 are decent again, so I would just stick to these or 18.3.4

I tested 18.2.1, 18.3.4 and 18.5.1, none of them worked after 1803 update, after pixel patcher system starts stuttering and claymore got stuck on start, only way to get past that was to install blockchain driver. Before update I was running 18.3.4. and those worked well. My system is almost identical (6xRX480 and H81 BTC)

Try to use 18.5.2 drivers

Back again with this stuttering problem, i was running to these days the BC driver but tried to update to 19.4.3 and same stuttering again. None of the drivers work after 18.?.?
Rig works with 4 cards but after connecting fifth or sixth card, it starts to lag and cant run claymore and again BC driver works perfecly but can't use -strap option

Does anyone know fix for this?

[Lunga Chung]

Did you autotune -dcri wirh -asm 2 ?
There will be new dcri values

yep, left them to auto tune

Are your straps similar to ubermix 3.4 ?

[Claymore]

Back again with this stuttering problem, i was running to these days the BC driver but tried to update to 19.4.3 and same stuttering again. None of the drivers work after 18.?.?
Rig works with 4 cards but after connecting fifth or sixth card, it starts to lag and cant run claymore and again BC driver works perfecly but can't use -strap option
Does anyone know fix for this?

Ok I will add blockchain driver support in upcoming version.

[Pe_Da]

First, great work @Claymore!

But I face one problem ... if I mine with two instances and use for both the "-stripe" option, in my case, one instance for AMD and one instance for nVidia, the miner post the "driver in use" failure message by start the second instance. And then the miner will not use the additional speed increasing for the second instance at all.

Is that already known?

[davescream]

what '-driver install' do?

*Driver installed successfully
*reboot
*GPU-Z show the same driver version
 

Also I had Samsung Polaris with bat memory ~1860mhz. I flashed stock bios without custom timings, and -strap 1  show only 23mh. Then I flashed-back CUSTOM timings bios and it show 28.5.

So maybe miner do not have -straps for polaris_samsung@1860?