Bitcoin Forum
January 21, 2019, 03:03:53 PM *
News: Latest Bitcoin Core release: 0.17.1 [Torrent]
 
   Home   Help Search Login Register More  
Pages: « 1 ... 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 [786] 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 ... 844 »
  Print  
Author Topic: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.1  (Read 5771644 times)
This is a self-moderated topic. If you do not want to be moderated by the person who started this topic, create a new topic.
kano
Legendary
*
Offline Offline

Activity: 2702
Merit: 1068


Linux since 1997 RedHat 4


View Profile
December 29, 2014, 05:37:12 AM
 #15701

...
only 2 posts and never seen again. This fixed my updating and time table. Thanks for solving one of the problems I just ran into using updates. This fixed the problem thanks again.
https://github.com/kanoi/cgminer-binaries/tree/master/AntS1

Pool: https://kano.is Here on Bitcointalk: Forum BTC: 1KanoPb8cKYqNrswjaA8cRDk4FAS9eDMLU
FreeNode IRC: irc.freenode.net channel #kano.is Majority developer of the ckpool code
Help keep Bitcoin secure by mining on pools with full block verification on all blocks - and NO empty blocks!
1548083033
Hero Member
*
Offline Offline

Posts: 1548083033

View Profile Personal Message (Offline)

Ignore
1548083033
Reply with quote  #2

1548083033
Report to moderator
1548083033
Hero Member
*
Offline Offline

Posts: 1548083033

View Profile Personal Message (Offline)

Ignore
1548083033
Reply with quote  #2

1548083033
Report to moderator
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
1548083033
Hero Member
*
Offline Offline

Posts: 1548083033

View Profile Personal Message (Offline)

Ignore
1548083033
Reply with quote  #2

1548083033
Report to moderator
Buchi-88
Legendary
*
Offline Offline

Activity: 1862
Merit: 1060



View Profile
December 29, 2014, 12:12:35 PM
 #15702

Hello,

anyone have an idea about this failure?

Quote
cgminer version 4.7.1 - Started: [2014-12-22 12:46:13]
-----------------------------------------------------------------------------------------------
 (5s):29.66G (1m):29.07G (5m):29.24G (15m):29.28G (avg):29.27Gh/s
 A:60553  R:1918  HW:0  WU:412.8/m | ST: 3  SS: 0  NB: 98  LW: 101434  GF: 7  RF: 0
 Connected to multiple pools with block change notify
 Block: 712d1003...  Diff:2.34M  Started: [15:19:58]  Best share: 79.9K
-----------------------------------------------------------------------------------------------
 USB management Pool management Settings Display options Quit
 0: BXM 0       :                         | 3.725G / 3.624Gh/s WU:51.9/m A:7810 R:217 HW:0
 1: BXM 1       :                         | 3.815G / 3.797Gh/s WU:53.2/m A:8606 R:182 HW:0
 2: BXM 2       :                         | 4.018G / 4.003Gh/s WU:56.0/m A:8544 R:274 HW:0
 3: BXM 3       :                         | 3.715G / 3.700Gh/s WU:51.8/m A:7457 R:292 HW:0
 4: BXM 4       :                         | 3.656G / 3.607Gh/s WU:51.1/m A:7342 R:201 HW:0
 6: BXM 6       :                         | 3.732G / 3.667Gh/s WU:51.9/m A:7733 R:249 HW:0
 8: BXM 8       :                         | 3.932G / 3.883Gh/s WU:54.5/m A:4895 R:226 HW:0
 9: BXM 9       :                         | 3.021G / 2.981Gh/s WU:42.1/m A:2103 R:126 HW:0
-----------------------------------------------------------------------------------------------
[2014-12-22 13:38:14] BXM 5: SPI RX error 0, read 55 of 81
 [2014-12-22 13:38:14] BXM 5 failure, disabling!
 [2014-12-22 13:38:14] BXM 5: SPI TX error -4, sent 0 of 11
 [2014-12-22 13:38:14] BXM 5: SPI TX error -4, sent 0 of 12
 [2014-12-22 14:30:46] BXM 7: SPI RX error 0, read 0 of 81
 [2014-12-22 14:30:46] BXM 7 failure, disabling!
 [2014-12-22 14:30:46] BXM 7: SPI TX error -4, sent 0 of 11
 [2014-12-22 14:30:46] BXM 7: SPI TX error -4, sent 0 of 12

regards


No one had an idea?

MoozicoreWORLDS FIRST MUSIC STREAMING SERVICE ON BLOCKCHAIN
 
   █████                     █████
  ███████                   ███████
  ███████                   ███████
  ███████                   ███████
  ███████                   ███████
  ███████                   ███████
  ███████                   ███████
  ███████       █████       ███████
  ███████      ███████      ███████
  ███████      ███████      ███████
  ███████      ███████      ███████
  ███████      ███████      ███████
  ███████      ███████      ███████
  ███████      ███████      ███████
  ███████      ███████      ███████
  ███████      ███████      ███████
  ███████      ███████      ███████
   █████        █████        █████
hurricandave
Legendary
*
Offline Offline

Activity: 945
Merit: 1000



View Profile
December 29, 2014, 12:21:43 PM
 #15703

Why is the diff. so low? Are you trying to mine alt. coins? CGMiner doesn't support alt.
crazyearner
Legendary
*
Offline Offline

Activity: 1806
Merit: 1001



View Profile
December 29, 2014, 07:26:21 PM
 #15704

...
only 2 posts and never seen again. This fixed my updating and time table. Thanks for solving one of the problems I just ran into using updates. This fixed the problem thanks again.
https://github.com/kanoi/cgminer-binaries/tree/master/AntS1

Problem in github readme theirs no part for the update t sort time clocks out on it

vi /usr/lib/lua/luci/controller/cgminer.lua is thei but dosent give the full code to use as vi part is missing from gitgub

=
  R E B E L L I O U S 
  ▄▀▀▀▀▀▄▄                           ▄▄▀▀▀▀▀▄
▄▀        █▄▄                     ▄▄█        ▀▄
█            █████████████████████            █
█▄          ██       ██ ██       ██          ▄█
█        █            █            █        █
  █    █               █               █    █
   █ ██               █ █               ██ █
    █ █               █ █               █ █
    █ ███▄  █████▄   ██ ██   ▄█████  ▄███ █
    █     ███     █         █     ███     █
     █   █   ▀███ █  █   █  █ ███▀   █   █
     █   █      █ █  █   █  █ █      █   █
     █   █      ██  █     █  ██      █   █
      █  █     ██  █       █  ██     █  █
      █  █    ██  █ ███████ █  ██    █  █
      █ ███   ██  █         █  ██   ███ █
       █   ▀███      █   █      ███▀   █
        █     ██       █       ██     █
         █      █   ▄▄███▄▄   █      █
          ███   ███▀       ▀███   ███
             █████           █████
                  ███████████
  ▄▀▀▀▀▀▄▄                           ▄▄▀▀▀▀▀▄
▄▀        █▄▄                     ▄▄█        ▀▄
█            █████████████████████            █
█▄          ██       ██ ██       ██          ▄█
█        █            █            █        █
  █    █               █               █    █
   █ ██               █ █               ██ █
    █ █               █ █               █ █
    █ ███▄  █████▄   ██ ██   ▄█████  ▄███ █
    █     ███     █         █     ███     █
     █   █   ▀███ █  █   █  █ ███▀   █   █
     █   █      █ █  █   █  █ █      █   █
     █   █      ██  █     █  ██      █   █
      █  █     ██  █       █  ██     █  █
      █  █    ██  █ ███████ █  ██    █  █
      █ ███   ██  █         █  ██   ███ █
       █   ▀███      █   █      ███▀   █
        █     ██       █       ██     █
         █      █   ▄▄███▄▄   █      █
          ███   ███▀       ▀███   ███
             █████           █████
                  ███████████
  R E B E L L I O U S
crazyearner
Legendary
*
Offline Offline

Activity: 1806
Merit: 1001



View Profile
December 29, 2014, 07:33:03 PM
 #15705

Why is the diff. so low? Are you trying to mine alt. coins? CGMiner doesn't support alt.


If his diff is so low then it would probs mean hes mining a newer coin alt or not alt cgminer you can mine different alogs such as scrypt and sha. Unless they have changed it since I last used it.

=
  R E B E L L I O U S 
  ▄▀▀▀▀▀▄▄                           ▄▄▀▀▀▀▀▄
▄▀        █▄▄                     ▄▄█        ▀▄
█            █████████████████████            █
█▄          ██       ██ ██       ██          ▄█
█        █            █            █        █
  █    █               █               █    █
   █ ██               █ █               ██ █
    █ █               █ █               █ █
    █ ███▄  █████▄   ██ ██   ▄█████  ▄███ █
    █     ███     █         █     ███     █
     █   █   ▀███ █  █   █  █ ███▀   █   █
     █   █      █ █  █   █  █ █      █   █
     █   █      ██  █     █  ██      █   █
      █  █     ██  █       █  ██     █  █
      █  █    ██  █ ███████ █  ██    █  █
      █ ███   ██  █         █  ██   ███ █
       █   ▀███      █   █      ███▀   █
        █     ██       █       ██     █
         █      █   ▄▄███▄▄   █      █
          ███   ███▀       ▀███   ███
             █████           █████
                  ███████████
  ▄▀▀▀▀▀▄▄                           ▄▄▀▀▀▀▀▄
▄▀        █▄▄                     ▄▄█        ▀▄
█            █████████████████████            █
█▄          ██       ██ ██       ██          ▄█
█        █            █            █        █
  █    █               █               █    █
   █ ██               █ █               ██ █
    █ █               █ █               █ █
    █ ███▄  █████▄   ██ ██   ▄█████  ▄███ █
    █     ███     █         █     ███     █
     █   █   ▀███ █  █   █  █ ███▀   █   █
     █   █      █ █  █   █  █ █      █   █
     █   █      ██  █     █  ██      █   █
      █  █     ██  █       █  ██     █  █
      █  █    ██  █ ███████ █  ██    █  █
      █ ███   ██  █         █  ██   ███ █
       █   ▀███      █   █      ███▀   █
        █     ██       █       ██     █
         █      █   ▄▄███▄▄   █      █
          ███   ███▀       ▀███   ███
             █████           █████
                  ███████████
  R E B E L L I O U S
wolf_miner
Legendary
*
Offline Offline

Activity: 1017
Merit: 1000



View Profile
December 30, 2014, 09:37:07 AM
 #15706

Hi, is possible to use "Quota" parameter with "Rotare" strategy?

Thanks in advance W_M



Buchi-88
Legendary
*
Offline Offline

Activity: 1862
Merit: 1060



View Profile
December 30, 2014, 02:05:01 PM
 #15707

Why is the diff. so low? Are you trying to mine alt. coins? CGMiner doesn't support alt.


Hello I mine the german "eMark" this is also a sha256 Coin Wink

MoozicoreWORLDS FIRST MUSIC STREAMING SERVICE ON BLOCKCHAIN
 
   █████                     █████
  ███████                   ███████
  ███████                   ███████
  ███████                   ███████
  ███████                   ███████
  ███████                   ███████
  ███████                   ███████
  ███████       █████       ███████
  ███████      ███████      ███████
  ███████      ███████      ███████
  ███████      ███████      ███████
  ███████      ███████      ███████
  ███████      ███████      ███████
  ███████      ███████      ███████
  ███████      ███████      ███████
  ███████      ███████      ███████
  ███████      ███████      ███████
   █████        █████        █████
helipotte
Hero Member
*****
Offline Offline

Activity: 640
Merit: 500


Pick and place? I need more coffee.


View Profile
December 30, 2014, 06:14:51 PM
 #15708

Is the blockerupter prisma/tube not enabled in the windows binary download?  When I run cgminer 4.9.0 it never detects the tube I have connected with a

CP2102 Uart.  The option "bet-clk 25" results in "unrecognized option".  I complied it myself in Mingw.  This way detects it but I get LIBUSB errors the a crash.

This same setup works fine under Linux but due to hardware placement windows is the only option now, or the crappy controller using a proxy.  Never have been

able to get this thing to hash under Windows 7 x64.

Anyone else encounter this?
os2sam
Legendary
*
Offline Offline

Activity: 2548
Merit: 1003


Think for yourself


View Profile
December 30, 2014, 06:27:32 PM
 #15709

Is the blockerupter prisma/tube not enabled in the windows binary download?  When I run cgminer 4.9.0 it never detects the tube I have connected with a

CP2102 Uart.  The option "bet-clk 25" results in "unrecognized option".  I complied it myself in Mingw.  This way detects it but I get LIBUSB errors the a crash.

This same setup works fine under Linux but due to hardware placement windows is the only option now, or the crappy controller using a proxy.  Never have been

able to get this thing to hash under Windows 7 x64.

Anyone else encounter this?

Did you install the WinUSB driver and set it as the default for your mining devices?

A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing on usenet and in e-mail?
helipotte
Hero Member
*****
Offline Offline

Activity: 640
Merit: 500


Pick and place? I need more coffee.


View Profile
December 30, 2014, 06:44:11 PM
 #15710

Is the blockerupter prisma/tube not enabled in the windows binary download?  When I run cgminer 4.9.0 it never detects the tube I have connected with a

CP2102 Uart.  The option "bet-clk 25" results in "unrecognized option".  I complied it myself in Mingw.  This way detects it but I get LIBUSB errors the a crash.

This same setup works fine under Linux but due to hardware placement windows is the only option now, or the crappy controller using a proxy.  Never have been

able to get this thing to hash under Windows 7 x64.

Anyone else encounter this?

Did you install the WinUSB driver and set it as the default for your mining devices?

Yes, using zadig.  Why is the option "--bet-clk 25" returning "unrecognized option" although this is referenced in the readme.  What is produced when I attempt to run

cgminer:

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

C:\Users\Owner\Desktop\cgminer-4.8.0-windows>start.bat

C:\Users\Owner\Desktop\cgminer-4.8.0-windows>cgminer.exe -o stratum+tcp://192.168.1.118:73
33 -u Helipotte.0 -p x  --api-network --api-listen  --bet-clk 25
 [2014-12-30 13:40:34] cgminer.exe: --bet-clk: unrecognized option

 Huh
os2sam
Legendary
*
Offline Offline

Activity: 2548
Merit: 1003


Think for yourself


View Profile
December 30, 2014, 07:16:18 PM
Last edit: December 31, 2014, 02:23:04 PM by os2sam
 #15711

Is the blockerupter prisma/tube not enabled in the windows binary download?  When I run cgminer 4.9.0 it never detects the tube I have connected with a

CP2102 Uart.  The option "bet-clk 25" results in "unrecognized option".  I complied it myself in Mingw.  This way detects it but I get LIBUSB errors the a crash.

This same setup works fine under Linux but due to hardware placement windows is the only option now, or the crappy controller using a proxy.  Never have been

able to get this thing to hash under Windows 7 x64.

Anyone else encounter this?

Did you install the WinUSB driver and set it as the default for your mining devices?
Yes, using zadig.  Why is the option "--bet-clk 25" returning "unrecognized option" although this is referenced in the readme.  What is produced when I attempt to run

cgminer:

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

C:\Users\Owner\Desktop\cgminer-4.8.0-windows>start.bat

C:\Users\Owner\Desktop\cgminer-4.8.0-windows>cgminer.exe -o stratum+tcp://192.168.1.118:73
33 -u Helipotte.0 -p x  --api-network --api-listen  --bet-clk 25
 [2014-12-30 13:40:34] cgminer.exe: --bet-clk: unrecognized option

 Huh


Dunno.  I didn't see you mention the WinUSB driver so I thought I'd run that up the flagpole.

I'm assuming you tried it without the --bet-clk option at all too?

A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing on usenet and in e-mail?
IYFTech
Hero Member
*****
Offline Offline

Activity: 686
Merit: 500


WANTED: Active dev to fix & re-write p2pool in C


View Profile
December 31, 2014, 01:34:17 AM
 #15712

Seasonal greetings wondrous & wise cgniner devs,

Got a little question for you, I'm playing around with my S5 & p2pool in an effort to reduce rejects & have lowered the queue to the default "1" which has helped, but was also figuring that their fork is probably the same as in the S3 & was throwing away good work - will your fixed cgminer binary from the S3 work with the S5 too do you think?

Thanks in advance & Happy New Year  Smiley

-- Smiley  Thank you for smoking  Smiley --  If you paid VAT to dogie for items you should read this thread:  https://bitcointalk.org/index.php?topic=1018906.0
AJinNYC
Member
**
Offline Offline

Activity: 84
Merit: 10

Bored with you morons.


View Profile
December 31, 2014, 04:39:35 PM
Last edit: January 01, 2015, 11:19:47 AM by AJinNYC
 #15713

Is there anyway to disable a specific type of hardware unit? I have eight Antminer U2s that I don't want CGMiner controlling but I want it to control my RockMiner New R-Box.

Done with this forum. Goodbye all.
hurricandave
Legendary
*
Offline Offline

Activity: 945
Merit: 1000



View Profile
December 31, 2014, 05:06:23 PM
 #15714

Is there anyway to disable a specific type of hardware unit? I have either Antminer U2s that I don't want CGMiner controlling but I want it to control my RockMiner New R-Box.
Look thru the readme files or news files. Should find the -S noauto (not sure of the exact dash part) then you will look for the correct argument for telling cgminer to use the port and hub location of the device(s) you want it to use. Be aware, zadig and silabs drivers don't play nice with each other on the same machine, as well as the possibility that the port/hub assignments may change when you disconnect/restart the pc.
AJinNYC
Member
**
Offline Offline

Activity: 84
Merit: 10

Bored with you morons.


View Profile
December 31, 2014, 05:33:03 PM
 #15715

Be aware, zadig and silabs drivers don't play nice with each other on the same machine, as well as the possibility that the port/hub assignments may change when you disconnect/restart the pc.

Wouldn't expect anything else with bitcoin mining. Seems like there's a lot of this non-cross compatibility with drivers, mining software, and hardware. No wonder why it'll probably never go mainstream.

Done with this forum. Goodbye all.
helipotte
Hero Member
*****
Offline Offline

Activity: 640
Merit: 500


Pick and place? I need more coffee.


View Profile
December 31, 2014, 05:37:28 PM
 #15716


Dunno.  I didn't see you mention the WinUSB driver so I thought I'd run that up the flagpole.

I'm assuming you tried it without the --bet-clk option at all too?

I did, Nothing is seen.  When I try my complied copy of cgminer, the tube/uart is seen but I receive errors indicating a successful libusb reset the timeout.

The unit works in Linux.  I fear I might have done something wrong during the compile process.  I was hoping the released binary would work but appears to not

have support after all.  Otherwise I would think the "--bet-clk" parameter would be recognized.
-ck
Moderator
Legendary
*
Offline Offline

Activity: 2758
Merit: 1149


Ruu \o/


View Profile WWW
January 01, 2015, 02:47:43 AM
 #15717

Is there anyway to disable a specific type of hardware unit? I have either Antminer U2s that I don't want CGMiner controlling but I want it to control my RockMiner New R-Box.
Check readme for documentation of the --usb option.

Developer/maintainer for cgminer and ckpool/ckproxy.
ZERO FEE Pooled mining at ckpool.org, 1% Fee Solo mining at solo.ckpool.org
-ck
-ck
Moderator
Legendary
*
Offline Offline

Activity: 2758
Merit: 1149


Ruu \o/


View Profile WWW
January 01, 2015, 09:39:29 AM
 #15718

Seasonal greetings wondrous & wise cgniner devs,

Got a little question for you, I'm playing around with my S5 & p2pool in an effort to reduce rejects & have lowered the queue to the default "1" which has helped, but was also figuring that their fork is probably the same as in the S3 & was throwing away good work - will your fixed cgminer binary from the S3 work with the S5 too do you think?

Thanks in advance & Happy New Year  Smiley
No idea at this stage sorry. Happy new year Smiley

Developer/maintainer for cgminer and ckpool/ckproxy.
ZERO FEE Pooled mining at ckpool.org, 1% Fee Solo mining at solo.ckpool.org
-ck
-ck
Moderator
Legendary
*
Offline Offline

Activity: 2758
Merit: 1149


Ruu \o/


View Profile WWW
January 01, 2015, 09:47:34 AM
 #15719

Is the blockerupter prisma/tube not enabled in the windows binary download?  When I run cgminer 4.9.0 it never detects the tube I have connected with a

CP2102 Uart.  The option "bet-clk 25" results in "unrecognized option".  I complied it myself in Mingw.  This way detects it but I get LIBUSB errors the a crash.

This same setup works fine under Linux but due to hardware placement windows is the only option now, or the crappy controller using a proxy.  Never have been

able to get this thing to hash under Windows 7 x64.
Yes you are right, I wasn't particularly pleased at the reports from the few people who had tried the driver AM pushed to master cgminer since most people reported it didn't actually work, so I conveniently forgot to include it. Anyway here's a drop-in replacement binary for the windows 4.9.0 version if you still want to try it, just replace the existing exe that comes with 4.9.0:

http://ck.kolivas.org/apps/cgminer/temp/cgminer.exe

Developer/maintainer for cgminer and ckpool/ckproxy.
ZERO FEE Pooled mining at ckpool.org, 1% Fee Solo mining at solo.ckpool.org
-ck
-ck
Moderator
Legendary
*
Offline Offline

Activity: 2758
Merit: 1149


Ruu \o/


View Profile WWW
January 01, 2015, 09:50:32 AM
 #15720

Hello,

anyone have an idea about this failure?

Quote
cgminer version 4.7.1 - Started: [2014-12-22 12:46:13]
-----------------------------------------------------------------------------------------------
 (5s):29.66G (1m):29.07G (5m):29.24G (15m):29.28G (avg):29.27Gh/s
 A:60553  R:1918  HW:0  WU:412.8/m | ST: 3  SS: 0  NB: 98  LW: 101434  GF: 7  RF: 0
 Connected to multiple pools with block change notify
 Block: 712d1003...  Diff:2.34M  Started: [15:19:58]  Best share: 79.9K
-----------------------------------------------------------------------------------------------
 USB management Pool management Settings Display options Quit
 0: BXM 0       :                         | 3.725G / 3.624Gh/s WU:51.9/m A:7810 R:217 HW:0
 1: BXM 1       :                         | 3.815G / 3.797Gh/s WU:53.2/m A:8606 R:182 HW:0
 2: BXM 2       :                         | 4.018G / 4.003Gh/s WU:56.0/m A:8544 R:274 HW:0
 3: BXM 3       :                         | 3.715G / 3.700Gh/s WU:51.8/m A:7457 R:292 HW:0
 4: BXM 4       :                         | 3.656G / 3.607Gh/s WU:51.1/m A:7342 R:201 HW:0
 6: BXM 6       :                         | 3.732G / 3.667Gh/s WU:51.9/m A:7733 R:249 HW:0
 8: BXM 8       :                         | 3.932G / 3.883Gh/s WU:54.5/m A:4895 R:226 HW:0
 9: BXM 9       :                         | 3.021G / 2.981Gh/s WU:42.1/m A:2103 R:126 HW:0
-----------------------------------------------------------------------------------------------
[2014-12-22 13:38:14] BXM 5: SPI RX error 0, read 55 of 81
 [2014-12-22 13:38:14] BXM 5 failure, disabling!
 [2014-12-22 13:38:14] BXM 5: SPI TX error -4, sent 0 of 11
 [2014-12-22 13:38:14] BXM 5: SPI TX error -4, sent 0 of 12
 [2014-12-22 14:30:46] BXM 7: SPI RX error 0, read 0 of 81
 [2014-12-22 14:30:46] BXM 7 failure, disabling!
 [2014-12-22 14:30:46] BXM 7: SPI TX error -4, sent 0 of 11
 [2014-12-22 14:30:46] BXM 7: SPI TX error -4, sent 0 of 12

regards

Likely you are drawing too much power from your USB hub for that many devices.

Developer/maintainer for cgminer and ckpool/ckproxy.
ZERO FEE Pooled mining at ckpool.org, 1% Fee Solo mining at solo.ckpool.org
-ck
Pages: « 1 ... 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 [786] 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 ... 844 »
  Print  
 
Jump to:  

Bitcointalk.org is not available or authorized for sale. Do not believe any fake listings.
Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!