SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[liomojo1]

Guys give advice for rx580 8gb , i can`t get it to hash more than 830h , 2 treads 55 intensity. Any suggestion?

[Q_R_V]

Guys give advice for rx580 8gb , i can`t get it to hash more than 830h , 2 treads 55 intensity. Any suggestion?

What memory do you have and what clocks have you tried? 2 treads, 56 intensity, 8GB Samsung with ubermix 3.1 @ 1250cc 2000mc should give you 1000h/s or more.

[liomojo1]

It is hynix 1170/2150  modded bios  , they make 30 on eth that way and 940 on sumo

[Q_R_V]

If it's hynix or micron then you will need tighter timings or higher memory clock. Timings for eth are not ideal when used on xmr.

[ALEX_RAA]

It is hynix 1170/2150  modded bios  , they make 30 on eth that way and 940 on sumo

for cryptonight algo big metter only gpu core clock, if your gpu can do 1250-1300mhz - you will see ~1000h/s per card.
Just overclock gpu to 1300mhz and clock down memmory to 2050mhz

[doktor83]

sorry for noob question but how to see when miner is minig to dev? is it showed in the console?

yes, its displayed when it starts and when it ends.

[ALEX_RAA]

sorry for noob question but how to see when miner is minig to dev? is it showed in the console?

yes, its displayed when it starts and when it ends.

ohh... finaly i find it in console and i see that after dev fee mining is end miner try to send duplicate shares... what is that?

https://preview.ibb.co/kd3gcS/2018_04_19_142719.png

p.s. thats happen after every dev fee mining session

[JuanHungLo]

I get "your IP is banned" ..

SRBminer v1.4.4

https://imgur.com/a/srBuIhH

pool: https://cryptoknight.cc/haven/

Anyone else with this problem?

PD: I was mining for a week without problems with v1.3.1, last night I updated to version 1.4.4.

I have this problem.  It is with Stellite Pool - CryptoKnight.

It does it with this current miner AND xmr-stak-stellitequestion-compiled-0.

And, no, it is NOT because of the incorrect algo being picked.

So, I conclude that it is a POOL problem, not a config or miner problem

I have brought it to the attention of the pool's thread.

[doktor83]

i will add some logic to check if share was already sent, and if it was , don't send it again.
Maybe sometimes a sneaky share is sent two times.

[liomojo1]

It is hynix 1170/2150  modded bios  , they make 30 on eth that way and 940 on sumo

for cryptonight algo big metter only gpu core clock, if your gpu can do 1250-1300mhz - you will see ~1000h/s per card.
Just overclock gpu to 1300mhz and clock down memmory to 2050mhz

Well after 1400/2100 the hashrate got lower from 830-50 to 790 . So this is not a good decision or I am doing something wrong?

[rig1313]

Hello Doktor

i have 11 gpus

miner crashing when double threads is on for all of them

i must set some of them on 1 that miner work properly

whats the problem?

ur miner can handle only 7 gpus with double threads?

[JuanHungLo]

i will add some logic to check if share was already sent, and if it was , don't send it again.
Maybe sometimes a sneaky share is sent two times.

doktor83,
Support by leafy at that pool support thinks that some duplicate shares are being submitted and this is why IP ban is being issued to me at times.
Thanks for looking into this.

[daotienao1217]

Can sbrminer run V4 algorithm of intensecoin? testnet at http://intensecoin.com/pool

[ALEX_RAA]

It is hynix 1170/2150  modded bios  , they make 30 on eth that way and 940 on sumo

for cryptonight algo big metter only gpu core clock, if your gpu can do 1250-1300mhz - you will see ~1000h/s per card.
Just overclock gpu to 1300mhz and clock down memmory to 2050mhz

Well after 1400/2100 the hashrate got lower from 830-50 to 790 . So this is not a good decision or I am doing something wrong?

1. try to downclock memory more, to 2000 or 2050
2. have you downvolt the core?
3. may be you should try different timings for you memory, in my cases (over 20 gpus) this work for cpyptonight like a charm. All of my cards have hynix memory and to all of them i flashed identical timings, if you want to i can post it here so you can try

[doktor83]

Can sbrminer run V4 algorithm of intensecoin? testnet at http://intensecoin.com/pool

yes, just use 'normalv7'

[zot57]

It is hynix 1170/2150  modded bios  , they make 30 on eth that way and 940 on sumo

for cryptonight algo big metter only gpu core clock, if your gpu can do 1250-1300mhz - you will see ~1000h/s per card.
Just overclock gpu to 1300mhz and clock down memmory to 2050mhz

Well after 1400/2100 the hashrate got lower from 830-50 to 790 . So this is not a good decision or I am doing something wrong?

1. try to downclock memory more, to 2000 or 2050
2. have you downvolt the core?
3. may be you should try different timings for you memory, in my cases (over 20 gpus) this work for cpyptonight like a charm. All of my cards have hynix memory and to all of them i flashed identical timings, if you want to i can post it here so you can try

I have also hynix and got also lower hashrate to 780. i have sapphire rx580 8gb hynix. I used oneclick in polaris but obviously didn't work.
i have gpu at 1300mhz and 950mV and memory at 2050 and 875mV. Let me know what to do to get 1.000.

[doktor83]

V1.4.5
- Added check of already sent result, so possibly no more duplicate shares should be sent to the pool
- Added GPU core clock & memory display (ADL OverdriveN supported cards) BETA

Also added an experiimental kernel (4) , so if you guys with old gpu's could check it that would be great

[ALEX_RAA]

It is hynix 1170/2150  modded bios  , they make 30 on eth that way and 940 on sumo

for cryptonight algo big metter only gpu core clock, if your gpu can do 1250-1300mhz - you will see ~1000h/s per card.
Just overclock gpu to 1300mhz and clock down memmory to 2050mhz

Well after 1400/2100 the hashrate got lower from 830-50 to 790 . So this is not a good decision or I am doing something wrong?

1. try to downclock memory more, to 2000 or 2050
2. have you downvolt the core?
3. may be you should try different timings for you memory, in my cases (over 20 gpus) this work for cpyptonight like a charm. All of my cards have hynix memory and to all of them i flashed identical timings, if you want to i can post it here so you can try

I have also hynix and got also lower hashrate to 780. i have sapphire rx580 8gb hynix. I used oneclick in polaris but obviously didn't work.
i have gpu at 1300mhz and 950mV and memory at 2050 and 875mV. Let me know what to do to get 1.000.

try to flash this timings:
777000000000000022C39C00AC595A3D90550F12B84C8408004006007E0514206A8900A00200312 0100F292F94273116

or this

999000000000000022C39C00AC595A3D90550F123CCF530C004006007E0514206A8900A00200312 0100F292F94273116

[JuanHungLo]

V1.4.5
- Added check of already sent result, so possibly no more duplicate shares should be sent to the pool
- Added GPU core clock & memory display (ADL OverdriveN supported cards)

Also added an experiimental kernel (4) , so if you guys with old gpu's could check it that would be great

Dok,
CC displays for me, but not MC

Sapphire RX 470 8GB Nitro+ (Samsung), Win7-64, Robinhood AMD driver hack (22.19.659.1)

[doktor83]

V1.4.5
- Added check of already sent result, so possibly no more duplicate shares should be sent to the pool
- Added GPU core clock & memory display (ADL OverdriveN supported cards)

Also added an experiimental kernel (4) , so if you guys with old gpu's could check it that would be great

Dok,
CC displays for me, but not MC

Sapphire RX 470 8GB Nitro+ (Samsung), Win7-64, Robinhood AMD driver hack (22.19.659.1)

yup just realised that myself, i tested on 570 & 580 before i uploaded the new v.
After that tried on 480 and no mem clk, so in next version that will be fixed )

I was in a hurry to give you a new version with the duplicates check, so i hope no more bans.