Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[greengo]

Who can help me
EthDcrMiner64.exe CRASHED!!!

Win 7/64 Crymson 16.7.2 RX 480

eth-proxy mode
Config:
# WARNING! Remove "#" characters to enable lines, with "#" they are disabled and will be ignored by miner! Check README for details.
# WARNING! Miner loads options from this file only if there are not any options in the command line!

-epool http://xx.xx.xx34:8083
-eworker !Worker
#-allpools 1
-ewal 0x615.....
-mode 1
-etha 0
-esm 0
#-ethi 16

LOG:
TH: 1 pool is specified
14:25:55:944   1250   Main Ethereum pool is xxxxxx:8083
14:25:56:060   1250   OpenCL platform: AMD Accelerated Parallel Processing
14:25:56:060   1250   
Cards available: 1
14:25:56:060   1250   GPU #0: name: Ellesmere, 8192 MB available, 36 compute units
14:25:56:060   1250   Total cards: 1
14:25:56:061   1250   Initializing...
14:25:56:061   1250   GPU #0 recognized as Radeon RX 480
14:25:56:061   1250   POOL/SOLO version
14:25:56:061   1250   b167
14:25:56:068   1250   start building OpenCL program...
14:25:59:719   1250   done
14:25:59:719   1250   GPU #0: set -etha as 0 (ETH algo for fast cards)
14:25:59:742   4b0   ETH - connecting to xxxxxxx.34:8083
14:25:59:742   4b0   http send request: {"method": "eth_getWork", "params": [], "id":0}
14:25:59:746   4b0   http got answer: {"jsonrpc": "2.0", "id": 0, "result": ["0x714204e2e4cdd7f19a5903752c98430e283710786e0bb8f6a8eeffb3f62deb54", "0x05bdd2c084d534ca95b954a616e56c8a126ba4a1e77257bf1c3ce22d8ccc5769", "0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}
14:25:59:747   4b0   ETH: Connected (xxxxxxxx:8083)
14:25:59:747   4b0   parse packet: 243
14:25:59:747   4b0   eth: job changed
14:25:59:747   4b0   new buf size: 0
14:25:59:842   1250   ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
14:25:59:843   1250   ETH: HTTP SOLO mode
14:25:59:844   1250   Ethereum HTTP requests time (-etht) is set to 200 ms
14:25:59:844   1250   Watchdog enabled
14:25:59:845   1250   Remote management is enabled on port 3333
14:25:59:846   1250   
14:25:59:846   11a4   Setting DAG epoch #61...
14:26:05:048   1250   Unsupported Overdrive version 7

AND CRASH!
PLS HELP!!!!!!!!!!

[1715138900]

1715138900

[1715138900]

1715138900

[1715138900]

1715138900

[adly3000]

as i calculated from reviews i can get 300Mh/s for sia on 380 so 3*380 can get 900Mh/s which is about 1200 sia/day (about 82cent/day)
anyone can confirm please?

[drr0ss]

nanopool Ethereum+Siacoin:
EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal YOUR_ETH_WALLET/YOUR_WORKER/YOUR_EMAIL -epsw x -dpool "http://sia-eu1.nanopool.org:9980/miner/header?address=YOUR_SIA_WALLET&worker=YOUR_WORKER_NAME&email=YOUR_EMAIL" -dcoin sia

Don't forget quotes if you pass parameters in command line. If you use "config.txt" for options, quotes can be skipped.

Thanks Claymore, I missed this too

[Tmdz]

as i calculated from reviews i can get 300Mh/s for sia on 380 so 3*380 can get 900Mh/s which is about 1200 sia/day (about 82cent/day)
anyone can confirm please?

The formula to calc this should be

(diff in GH) / (hash rate in GH) X ( 86,400 sec per day) X (240'000 block reward) X (price per sia) = Revenue per day

[Dowper]

Who can help me
EthDcrMiner64.exe CRASHED!!!

Win 7/64 Crymson 16.7.2 RX 480

eth-proxy mode
Config:
# WARNING! Remove "#" characters to enable lines, with "#" they are disabled and will be ignored by miner! Check README for details.
# WARNING! Miner loads options from this file only if there are not any options in the command line!

-epool http://xx.xx.xx34:8083
-eworker !Worker
#-allpools 1
-ewal 0x615.....
-mode 1
-etha 0
-esm 0
#-ethi 16

LOG:
TH: 1 pool is specified
14:25:55:944   1250   Main Ethereum pool is xxxxxx:8083
14:25:56:060   1250   OpenCL platform: AMD Accelerated Parallel Processing
14:25:56:060   1250   
Cards available: 1
14:25:56:060   1250   GPU #0: name: Ellesmere, 8192 MB available, 36 compute units
14:25:56:060   1250   Total cards: 1
14:25:56:061   1250   Initializing...
14:25:56:061   1250   GPU #0 recognized as Radeon RX 480
14:25:56:061   1250   POOL/SOLO version
14:25:56:061   1250   b167
14:25:56:068   1250   start building OpenCL program...
14:25:59:719   1250   done
14:25:59:719   1250   GPU #0: set -etha as 0 (ETH algo for fast cards)
14:25:59:742   4b0   ETH - connecting to xxxxxxx.34:8083
14:25:59:742   4b0   http send request: {"method": "eth_getWork", "params": [], "id":0}
14:25:59:746   4b0   http got answer: {"jsonrpc": "2.0", "id": 0, "result": ["0x714204e2e4cdd7f19a5903752c98430e283710786e0bb8f6a8eeffb3f62deb54", "0x05bdd2c084d534ca95b954a616e56c8a126ba4a1e77257bf1c3ce22d8ccc5769", "0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}
14:25:59:747   4b0   ETH: Connected (xxxxxxxx:8083)
14:25:59:747   4b0   parse packet: 243
14:25:59:747   4b0   eth: job changed
14:25:59:747   4b0   new buf size: 0
14:25:59:842   1250   ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
14:25:59:843   1250   ETH: HTTP SOLO mode
14:25:59:844   1250   Ethereum HTTP requests time (-etht) is set to 200 ms
14:25:59:844   1250   Watchdog enabled
14:25:59:845   1250   Remote management is enabled on port 3333
14:25:59:846   1250   
14:25:59:846   11a4   Setting DAG epoch #61...
14:26:05:048   1250   Unsupported Overdrive version 7

AND CRASH!
PLS HELP!!!!!!!!!!

My miner also crashes with RX480, Claymore please help.

[restless]

for dual mining I strongly sugest something like:

-ttdcr 75 -tstop 80 -tt 1
And if cards still overheat  add -li 1

[carlitogetaladajr]

as i calculated from reviews i can get 300Mh/s for sia on 380 so 3*380 can get 900Mh/s which is about 1200 sia/day (about 82cent/day)
anyone can confirm please?

Calculation is right. However, note that on actual nanopool site, the hashrate varies, more on lower version. I have mixed cards for my 2 rigs like r9 290, r9 280, hd 7970 & hd 7950. The website also do not display yet each card's hashrate.

Anyways, as for profitability, I can say SC is more profitable for now than DCR.

I am mining SC for 1 day, & decided to continue on until the next block adjustment, & will re-evaluate whether still worth it by then.

[olib123]

Hi, I am seeking advice on how to mine through Ethereum Claymore's dual-GPU AMD Decred_Siacoin Miner v5.0 Beta or gominer mine only solo SIA coins.
What is the procedure point by point? I read here in the forum but somehow I can not.
I first started in Windows SIA-UI, wallet I have created and then what? I want to mine only Sia coins. No eth+sia. Well thank you. 

[bileq]

guys i can not succeed sia solo mine on dual mode.
if sia-ui runs miner can not create one of dag file for any gpu.. i guess out of memory (4gb on rig)
and i can not succeed sia-ui accepts remote connection. tried to run sia-ui on my another computer and point sia host to this pc on dual miner, but host not accept that connection

anyone succeed sia solo mining with multiple rigs?

[osnwt]

Hi, I am seeking advice on how to mine through Ethereum Claymore's dual-GPU AMD Decred_Siacoin Miner v5.0 Beta or gominer mine only solo SIA coins.
...
No eth+sia.

The answer is above and many times answered: Claymore's miner is the ETHEREUM miner with extra bonus. You cannot use it to mine bonus coins without Ethereum. That's by design.

[olib123]

Hi, I am seeking advice on how to mine through Ethereum Claymore's dual-GPU AMD Decred_Siacoin Miner v5.0 Beta or gominer mine only solo SIA coins.
...
No eth+sia.

The answer is above and many times answered: Claymore's miner is the ETHEREUM miner with extra bonus. You cannot use it to mine bonus coins without Ethereum. That's by design.

And with gominer can i mine solo Sia coins?

[bileq]

Hi, I am seeking advice on how to mine through Ethereum Claymore's dual-GPU AMD Decred_Siacoin Miner v5.0 Beta or gominer mine only solo SIA coins.
...
No eth+sia.

The answer is above and many times answered: Claymore's miner is the ETHEREUM miner with extra bonus. You cannot use it to mine bonus coins without Ethereum. That's by design.

And with gominer can i mine solo Sia coins?

you can mine SC solo with go miner, you have to install sia-ui and sync all blocks first.
before that test your cards on solo SC mine. i mean weak cards like mine r7 730 not hashing good on solo SC.
R7 370 solo 480mh SC hash dual mode (with instensity 30) 220mh SC 14.8mh Eth, dual mode (with instensity 15) 115mh SC and 15.2mh Eth speed

[olib123]

Hi, I am seeking advice on how to mine through Ethereum Claymore's dual-GPU AMD Decred_Siacoin Miner v5.0 Beta or gominer mine only solo SIA coins.
...
No eth+sia.

The answer is above and many times answered: Claymore's miner is the ETHEREUM miner with extra bonus. You cannot use it to mine bonus coins without Ethereum. That's by design.

And with gominer can i mine solo Sia coins?

you can mine SC solo with go miner, you have to install sia-ui and sync all blocks first.
before that test your cards on solo SC mine. i mean weak cards like mine r7 730 not hashing good on solo SC.
R7 370 solo 480mh SC hash dual mode (with instensity 30) 220mh SC 14.8mh Eth, dual mode (with instensity 15) 115mh SC and 15.2mh Eth speed

I have two HD 7970 (1088/1500 MHz). Both cards 1840 MH/s. Sia Ui I started. Synchronization is.
Can you write me what I have to write in a * .bat file to gominer? Well thank you.

[bileq]

Hi, I am seeking advice on how to mine through Ethereum Claymore's dual-GPU AMD Decred_Siacoin Miner v5.0 Beta or gominer mine only solo SIA coins.
...
No eth+sia.

The answer is above and many times answered: Claymore's miner is the ETHEREUM miner with extra bonus. You cannot use it to mine bonus coins without Ethereum. That's by design.

And with gominer can i mine solo Sia coins?

you can mine SC solo with go miner, you have to install sia-ui and sync all blocks first.
before that test your cards on solo SC mine. i mean weak cards like mine r7 730 not hashing good on solo SC.
R7 370 solo 480mh SC hash dual mode (with instensity 30) 220mh SC 14.8mh Eth, dual mode (with instensity 15) 115mh SC and 15.2mh Eth speed

I have two HD 7970 (1088/1500 MHz). Both cards 1840 MH/s. Sia Ui I started. Synchronization is.
Can you write me what I write in a * .bat file to gominer? Well thank you.

firstly i test it with
gominer.exe -cpu -H localhost:9980 -E 0,1,2,3,4 // run only cpu (-E means exclude pointed gpus) when sia-ui accepts connection remove the parameters
gominer.exe -H localhost:9980

[olib123]

Hi, I am seeking advice on how to mine through Ethereum Claymore's dual-GPU AMD Decred_Siacoin Miner v5.0 Beta or gominer mine only solo SIA coins.
...
No eth+sia.

The answer is above and many times answered: Claymore's miner is the ETHEREUM miner with extra bonus. You cannot use it to mine bonus coins without Ethereum. That's by design.

And with gominer can i mine solo Sia coins?

you can mine SC solo with go miner, you have to install sia-ui and sync all blocks first.
before that test your cards on solo SC mine. i mean weak cards like mine r7 730 not hashing good on solo SC.
R7 370 solo 480mh SC hash dual mode (with instensity 30) 220mh SC 14.8mh Eth, dual mode (with instensity 15) 115mh SC and 15.2mh Eth speed

I have two HD 7970 (1088/1500 MHz). Both cards 1840 MH/s. Sia Ui I started. Synchronization is.
Can you write me what I write in a * .bat file to gominer? Well thank you.

firstly i test it with
gominer.exe -cpu -H localhost:9980 -E 0,1,2,3,4 // run only cpu (-E means exclude pointed gpus) when sia-ui accepts connection remove the parameters
gominer.exe -H localhost:9980

I´ll try but just now I have to go out. Then I'll write. Thank you so far. 

[Meech]

Who can help me
EthDcrMiner64.exe CRASHED!!!

Win 7/64 Crymson 16.7.2 RX 480

eth-proxy mode
Config:
# WARNING! Remove "#" characters to enable lines, with "#" they are disabled and will be ignored by miner! Check README for details.
# WARNING! Miner loads options from this file only if there are not any options in the command line!

-epool http://xx.xx.xx34:8083
-eworker !Worker
#-allpools 1
-ewal 0x615.....
-mode 1
-etha 0
-esm 0
#-ethi 16

LOG:
TH: 1 pool is specified
14:25:55:944   1250   Main Ethereum pool is xxxxxx:8083
14:25:56:060   1250   OpenCL platform: AMD Accelerated Parallel Processing
14:25:56:060   1250   
Cards available: 1
14:25:56:060   1250   GPU #0: name: Ellesmere, 8192 MB available, 36 compute units
14:25:56:060   1250   Total cards: 1
14:25:56:061   1250   Initializing...
14:25:56:061   1250   GPU #0 recognized as Radeon RX 480
14:25:56:061   1250   POOL/SOLO version
14:25:56:061   1250   b167
14:25:56:068   1250   start building OpenCL program...
14:25:59:719   1250   done
14:25:59:719   1250   GPU #0: set -etha as 0 (ETH algo for fast cards)
14:25:59:742   4b0   ETH - connecting to xxxxxxx.34:8083
14:25:59:742   4b0   http send request: {"method": "eth_getWork", "params": [], "id":0}
14:25:59:746   4b0   http got answer: {"jsonrpc": "2.0", "id": 0, "result": ["0x714204e2e4cdd7f19a5903752c98430e283710786e0bb8f6a8eeffb3f62deb54", "0x05bdd2c084d534ca95b954a616e56c8a126ba4a1e77257bf1c3ce22d8ccc5769", "0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}
14:25:59:747   4b0   ETH: Connected (xxxxxxxx:8083)
14:25:59:747   4b0   parse packet: 243
14:25:59:747   4b0   eth: job changed
14:25:59:747   4b0   new buf size: 0
14:25:59:842   1250   ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
14:25:59:843   1250   ETH: HTTP SOLO mode
14:25:59:844   1250   Ethereum HTTP requests time (-etht) is set to 200 ms
14:25:59:844   1250   Watchdog enabled
14:25:59:845   1250   Remote management is enabled on port 3333
14:25:59:846   1250   
14:25:59:846   11a4   Setting DAG epoch #61...
14:26:05:048   1250   Unsupported Overdrive version 7

AND CRASH!
PLS HELP!!!!!!!!!!

I'm just guessing but your last line in log could be that your using unsupported drivers.

[osnwt]

@Claymore:  please add a kind of trim() when processing pools.txt. If the pool line for Sia (at least) ends with email (at least) and a space char after it (...&email=user@domain[SPACE][NEWLINE]), nanopool (at least) gives connection error. Removing this space resolves the problem. It may be called 'feature', but I think that in URL request strings it is better to do whitespace trimming on both ends of string because the error message is not obvious for users and trailing spaces may be left unnoticed by many text editors.

[bileq]

i used the following in batch:
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x9102b6329a0bb966816ee0b05223047c1f7da69c.Rig1 -epsw x
-dpool http://sia-eu1.nanopool.org:9980/miner/header?address=3fb8c83410e0bab242231eef57ef700e0d9c4d350f14619e0f1ba860d6ff5460f35fdc639b1b
-dcoin sia
pause

but it did not show "-dpool http://sia-eu1.nanopool.org:9980/miner/header?address=3fb8c83410e0bab242231eef57ef700e0d9c4d350f14619e0f1ba860d6ff5460f35fdc639b1b
-dcoin sia" when starting
it did not showing anything about sia till i add "POOL: http://sia-eu1.nanopool.org:9980, WALLET: 3fb8c83410e0bab242231eef57ef700e0d9c4d350f14619e0f1ba860d6ff5460f35fdc639b1b" in the dpools.txt

but still showing error:
DCR: http error#022
DCR: Check username and passwordm and/or pool state.
DCR: Failed to connect to pool <sia-eu1.nanopool,org:9980>, retry in 10 sec

anyhelp pls?

use quotes for dpool params
--dpool "http://sia-eu1.nanopool.org:9980/miner/header?address=3fb8c83410e0bab242231eef57ef700e0d9c4d350f14619e0f1ba860d6ff5460f35fdc639b1b"

[greengo]

Who can help me
EthDcrMiner64.exe CRASHED!!!

Win 7/64 Crymson 16.7.2 RX 480

eth-proxy mode
Config:
# WARNING! Remove "#" characters to enable lines, with "#" they are disabled and will be ignored by miner! Check README for details.
# WARNING! Miner loads options from this file only if there are not any options in the command line!

-epool http://xx.xx.xx34:8083
-eworker !Worker
#-allpools 1
-ewal 0x615.....
-mode 1
-etha 0
-esm 0
#-ethi 16

LOG:
TH: 1 pool is specified
14:25:55:944   1250   Main Ethereum pool is xxxxxx:8083
14:25:56:060   1250   OpenCL platform: AMD Accelerated Parallel Processing
14:25:56:060   1250   
Cards available: 1
14:25:56:060   1250   GPU #0: name: Ellesmere, 8192 MB available, 36 compute units
14:25:56:060   1250   Total cards: 1
14:25:56:061   1250   Initializing...
14:25:56:061   1250   GPU #0 recognized as Radeon RX 480
14:25:56:061   1250   POOL/SOLO version
14:25:56:061   1250   b167
14:25:56:068   1250   start building OpenCL program...
14:25:59:719   1250   done
14:25:59:719   1250   GPU #0: set -etha as 0 (ETH algo for fast cards)
14:25:59:742   4b0   ETH - connecting to xxxxxxx.34:8083
14:25:59:742   4b0   http send request: {"method": "eth_getWork", "params": [], "id":0}
14:25:59:746   4b0   http got answer: {"jsonrpc": "2.0", "id": 0, "result": ["0x714204e2e4cdd7f19a5903752c98430e283710786e0bb8f6a8eeffb3f62deb54", "0x05bdd2c084d534ca95b954a616e56c8a126ba4a1e77257bf1c3ce22d8ccc5769", "0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}
14:25:59:747   4b0   ETH: Connected (xxxxxxxx:8083)
14:25:59:747   4b0   parse packet: 243
14:25:59:747   4b0   eth: job changed
14:25:59:747   4b0   new buf size: 0
14:25:59:842   1250   ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
14:25:59:843   1250   ETH: HTTP SOLO mode
14:25:59:844   1250   Ethereum HTTP requests time (-etht) is set to 200 ms
14:25:59:844   1250   Watchdog enabled
14:25:59:845   1250   Remote management is enabled on port 3333
14:25:59:846   1250   
14:25:59:846   11a4   Setting DAG epoch #61...
14:26:05:048   1250   Unsupported Overdrive version 7

AND CRASH!
PLS HELP!!!!!!!!!!

I'm just guessing but your last line in log could be that your using unsupported drivers.

Which driver to use with RX480 !!!??? Anybody use this card??

[Gagana]

Something strange with -ttdcr. I've got a rig with 6 R9 390

The command line is:

EthDcrMiner64.exe -ttdcr 85 -tt 1


This is the stats output from the miner:

Code:

GPU #0: name: Hawaii, 8192 MB available, 40 compute units
GPU #1: name: Hawaii, 8192 MB available, 40 compute units
GPU #2: name: Hawaii, 8192 MB available, 40 compute units
GPU #3: name: Hawaii, 8192 MB available, 40 compute units
GPU #4: name: Hawaii, 8192 MB available, 40 compute units
GPU #5: name: Hawaii, 8192 MB available, 40 compute units
ETH - Total Speed: 178.488 Mh/s, Total Shares: 15276, Rejected: 0, Time: 49:42
ETH: GPU0 29.773 Mh/s, GPU1 29.781 Mh/s, GPU2 29.805 Mh/s, GPU3 29.677 Mh/s, GPU4 29.669 Mh/s, GPU5 29.783 Mh/s
 DCR - Total Speed: 2603.150 Mh/s, Total Shares: 20028, Rejected: 143
 DCR: GPU0 446.600 Mh/s, GPU1 446.709 Mh/s, GPU2 447.079 Mh/s, GPU3 445.153 Mh/s, GPU4 370.859 Mh/s, GPU5 446.750 Mh/s
Incorrect ETH shares: GPU0 1, GPU1 3, GPU3 1, GPU4 1, GPU5 1
Pool switches: ETH - 0, DCR - 28
Current ETH share target: 0x0000000225c17d04, epoch #62
Current DCR share target: 0x00000000314f47f1, block #44415
DCR coefs (-ttdcr): GPU0 100%, GPU1 100%, GPU2 100%, GPU3 100%, GPU4 85%, GPU5 100%
GPU0 t=85C fan=99%, GPU1 t=82C fan=91%, GPU2 t=78C fan=75%, GPU3 t=84C fan=95%, GPU4 t=86C fan=100%, GPU5 t=86C fan=100%

As we can see, GPU4 and GPU5 have the temperature above 85C. As we can see only one card has the dcri coef lower than 100% (actually, 85%). It's strange already, I pressed "S" button many times after this screenshot taken and met this situation hardly ever. But I see for a long time that GPU4 temp is 86C but dcri coef is still 85%. Not 75%. Not 50%. It's strange for me. I'm pretty sure that I saw even 0% on another rig. I thought it would decrease the intensity until the card reached the target temperature. But it didn't.