carlosmonaco
Newbie
Offline
Activity: 105
Merit: 0
|
|
December 29, 2018, 12:11:12 PM |
|
For now I'm using your miners since month , but after 1.7.0 I cannot get my miners stable . All are running on 1.7.0 and crashing around once a week. I'm far from the best hashrate average 1920 h/s for all the rigs. I try to get the best hashrate but I do not know best setting for reference cards. I post in the other thread too to get more chance to get help:-) latest version or srb and crashing and same for TRM..
This is the log at the crash ( same for all miners) [2018-12-29 11:18:14] miner_result: Pool accepted result 0x000026A4 [2018-12-29 11:18:22] hashrate: GPU0: 1861 H/s [BUS:12] [2018-12-29 11:18:22] hashrate: GPU1: 1927 H/s [BUS:27] [2018-12-29 11:18:22] hashrate: GPU2: 1884 H/s [BUS:3] [2018-12-29 11:18:22] hashrate: GPU3: 1923 H/s [BUS:18] [2018-12-29 11:18:22] hashrate: GPU4: 1920 H/s [BUS:24] [2018-12-29 11:18:22] hashrate: GPU5: 1943 H/s [BUS:9] [2018-12-29 11:18:22] hashrate: GPU6: 1886 H/s [BUS:15] [2018-12-29 11:18:22] hashrate: GPU7: 1927 H/s [BUS:21] [2018-12-29 11:18:22] hashrate: Total: 15271 H/s [2018-12-29 11:18:25] miner_result: Sending user result to pool [2018-12-29 11:18:25] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64764","nonce":"ba8c00b0","result":"25c110c6e4606e5319aa9f5af76156e1e6b221c55237e4da8f175f06364e0000"}} [2018-12-29 11:18:25] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null} [2018-12-29 11:18:25] miner_result: Pool accepted result 0x00004E36 [2018-12-29 11:18:32] miner_result: Sending user result to pool [2018-12-29 11:18:32] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64764","nonce":"36a60090","result":"61d4bc628319756462503d5b2a998a43226065456c31c6de0a62e3b166450000"}} [2018-12-29 11:18:32] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null} [2018-12-29 11:18:32] miner_result: Pool accepted result 0x00004566 [2018-12-29 11:18:33] miner_result: Sending user result to pool [2018-12-29 11:18:33] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64764","nonce":"1ba60010","result":"bf043e2f595083f8bde62384eef736945926f626dbca4fe50e88b0041a6e0000"}} [2018-12-29 11:18:33] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null} [2018-12-29 11:18:33] miner_result: Pool accepted result 0x00006E1A [2018-12-29 11:18:43] miner_result: Sending user result to pool [2018-12-29 11:18:43] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64764","nonce":"37cd0020","result":"60dc05569c283ab05b451d907bd4086b21778cb2783bffcbfa1b737465830000"}} [2018-12-29 11:18:43] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null} [2018-12-29 11:18:43] miner_result: Pool accepted result 0x00008365 [2018-12-29 11:18:45] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"090986949de10534e1f20e6eae556262af5a2ac58b31c6cf93b046fa91ea55009542685ff6e9f40 0000000aae71b79d62e585c951fad9fce0d257235b57e05ea5533e283801246315a80de01","job_id":"64765","target":"cf8b0000"}} [2018-12-29 11:18:45] pool_have_job: Pool sent a new job (ID: 64765) [2018-12-29 11:18:57] miner_result: Sending user result to pool [2018-12-29 11:18:57] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64765","nonce":"aa280040","result":"f84d394527ec04e5bf9dfab181fd968fd6fbaed3983a07fe751b3465c6460000"}} [2018-12-29 11:18:57] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null} [2018-12-29 11:18:57] miner_result: Pool accepted result 0x000046C6 [2018-12-29 11:18:59] miner_result: Sending user result to pool [2018-12-29 11:18:59] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64765","nonce":"75280090","result":"a9d09e3ca6e12eeb260451eaf4f67c7996b9be4a7ca86302e6280ad619300000"}} [2018-12-29 11:19:00] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"090993949de105d961d240b17c4aa4a3e02d9d3d542ed8bd7692b27561a763f161e957a1b077ac0 0000000d332bb0ff3117b0060f9903e9d2be5808e5198984ab375eb39ad55ccbd6448d001","job_id":"64766","target":"cf8b0000"}} [2018-12-29 11:19:00] json_receive: {"id":1,"jsonrpc":"2.0","result":null,"error":{"code":-1,"message":"Block expired"}} [2018-12-29 11:19:00] pool_have_job: Pool sent a new job (ID: 64766) [2018-12-29 11:19:17] miner_result: Sending user result to pool [2018-12-29 11:19:17] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64766","nonce":"0f3300d0","result":"aad84fc4ac5913f6a513e57177aa113779e8882e21051d55fb5d7604cb070000"}} [2018-12-29 11:19:17] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null} [2018-12-29 11:19:17] miner_result: Pool accepted result 0x000007CB [2018-12-29 11:19:40] miner_result: Sending user result to pool [2018-12-29 11:19:40] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64766","nonce":"df8b0070","result":"963eb439b4edfe088e79442d62d5a2a50d9a634489d30260f799b647075d0000"}} [2018-12-29 11:19:40] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null} [2018-12-29 11:19:40] miner_result: Pool accepted result 0x00005D07 [2018-12-29 11:19:54] miner_result: Sending user result to pool [2018-12-29 11:19:54] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64766","nonce":"09bc0040","result":"7403df0c0ee20430427622d4ac91b6c4f19e9c81655cc06409cf89a585210000"}} [2018-12-29 11:19:54] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null} [2018-12-29 11:19:54] miner_result: Pool accepted result 0x00002185 [2018-12-29 11:20:00] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"0909cf949de105d961d240b17c4aa4a3e02d9d3d542ed8bd7692b27561a763f161e957a1b077ac0 0000000bbd2c3819f4b6f4a0cae913c63b6eb98688a653d5c2f786f2f17403ff183140a02","job_id":"64767","target":"cf8b0000"}} [2018-12-29 11:20:00] pool_have_job: Pool sent a new job (ID: 64767) [2018-12-29 11:20:03] watchdog: GPU0 [BUS: 12] hashing speed is 0 H/S [2018-12-29 11:20:03] watchdog: GPU1 [BUS: 27] hashing speed is 0 H/S [2018-12-29 11:20:03] watchdog: GPU4 [BUS: 24] hashing speed is 0 H/S [2018-12-29 11:20:03] watchdog: GPU6 [BUS: 15] hashing speed is 0 H/S [2018-12-29 11:20:14] watchdog: GPU0 [BUS: 12] hashing speed is 0 H/S [2018-12-29 11:20:14] watchdog: GPU1 [BUS: 27] hashing speed is 0 H/S [2018-12-29 11:20:14] watchdog: GPU4 [BUS: 24] hashing speed is 0 H/S [2018-12-29 11:20:14] watchdog: GPU6 [BUS: 15] hashing speed is 0 H/S [2018-12-29 11:20:23] hashrate: GPU0: 0 H/s [BUS:12] [2018-12-29 11:20:23] hashrate: GPU1: 0 H/s [BUS:27] [2018-12-29 11:20:23] hashrate: GPU2: 1885 H/s [BUS:3] [2018-12-29 11:20:23] hashrate: GPU3: 1925 H/s [BUS:18] [2018-12-29 11:20:23] hashrate: GPU4: 0 H/s [BUS:24] [2018-12-29 11:20:23] hashrate: GPU5: 1943 H/s [BUS:9] [2018-12-29 11:20:23] hashrate: GPU6: 0 H/s [BUS:15] [2018-12-29 11:20:23] hashrate: GPU7: 1928 H/s [BUS:21] [2018-12-29 11:20:23] hashrate: Total: 7681 H/s [2018-12-29 11:20:25] watchdog: GPU crash detected, miner will try to restart [2018-12-29 11:20:25] Restarting miner process
|
|
|
|
shera037
Newbie
Offline
Activity: 36
Merit: 0
|
|
December 29, 2018, 12:35:54 PM |
|
for doktor83 ne mogu pm pogaseno na pool-u if exist { log.Printf("Duplicate share from %s@%s %v", login, cs.ip, params) //return false, &ErrorReply{Code: 22, Message: "Duplicate share"} }
if !validShare { log.Printf("Invalid share from %s@%s", login, cs.ip) // Bad shares limit reached, return error and close if !ok { // return false, &ErrorReply{Code: 23, Message: "Invalid share"} } return false, nil } log.Printf("Valid share from %s@%s", login, cs.ip)
cs.nextDiff = s.calcNewDiff(cs)
if !ok { //return true, &ErrorReply{Code: -1, Message: "High rate of invalid shares"} } return true, nil zato ne prihvata a ne odgovori nista miner-u, jer kada odgovori sa ovim greskama otkacinje miner
|
|
|
|
zeef
Newbie
Offline
Activity: 301
Merit: 0
|
|
December 29, 2018, 01:48:44 PM |
|
For now I'm using your miners since month , but after 1.7.0 I cannot get my miners stable . All are running on 1.7.0 and crashing around once a week. I'm far from the best hashrate average 1920 h/s for all the rigs. I try to get the best hashrate but I do not know best setting for reference cards. I post in the other thread too to get more chance to get help:-) latest version or srb and crashing and same for TRM..
This is the log at the crash ( same for all miners) [2018-12-29 11:18:14] miner_result: Pool accepted result 0x000026A4 [2018-12-29 11:18:22] hashrate: GPU0: 1861 H/s [BUS:12] [2018-12-29 11:18:22] hashrate: GPU1: 1927 H/s [BUS:27] [2018-12-29 11:18:22] hashrate: GPU2: 1884 H/s [BUS:3] [2018-12-29 11:18:22] hashrate: GPU3: 1923 H/s [BUS:18] [2018-12-29 11:18:22] hashrate: GPU4: 1920 H/s [BUS:24] [2018-12-29 11:18:22] hashrate: GPU5: 1943 H/s [BUS:9] [2018-12-29 11:18:22] hashrate: GPU6: 1886 H/s [BUS:15] [2018-12-29 11:18:22] hashrate: GPU7: 1927 H/s [BUS:21] [2018-12-29 11:18:22] hashrate: Total: 15271 H/s [2018-12-29 11:18:25] miner_result: Sending user result to pool [2018-12-29 11:18:25] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64764","nonce":"ba8c00b0","result":"25c110c6e4606e5319aa9f5af76156e1e6b221c55237e4da8f175f06364e0000"}} [2018-12-29 11:18:25] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null} [2018-12-29 11:18:25] miner_result: Pool accepted result 0x00004E36 [2018-12-29 11:18:32] miner_result: Sending user result to pool [2018-12-29 11:18:32] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64764","nonce":"36a60090","result":"61d4bc628319756462503d5b2a998a43226065456c31c6de0a62e3b166450000"}} [2018-12-29 11:18:32] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null} [2018-12-29 11:18:32] miner_result: Pool accepted result 0x00004566 [2018-12-29 11:18:33] miner_result: Sending user result to pool [2018-12-29 11:18:33] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64764","nonce":"1ba60010","result":"bf043e2f595083f8bde62384eef736945926f626dbca4fe50e88b0041a6e0000"}} [2018-12-29 11:18:33] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null} [2018-12-29 11:18:33] miner_result: Pool accepted result 0x00006E1A [2018-12-29 11:18:43] miner_result: Sending user result to pool [2018-12-29 11:18:43] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64764","nonce":"37cd0020","result":"60dc05569c283ab05b451d907bd4086b21778cb2783bffcbfa1b737465830000"}} [2018-12-29 11:18:43] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null} [2018-12-29 11:18:43] miner_result: Pool accepted result 0x00008365 [2018-12-29 11:18:45] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"090986949de10534e1f20e6eae556262af5a2ac58b31c6cf93b046fa91ea55009542685ff6e9f40 0000000aae71b79d62e585c951fad9fce0d257235b57e05ea5533e283801246315a80de01","job_id":"64765","target":"cf8b0000"}} [2018-12-29 11:18:45] pool_have_job: Pool sent a new job (ID: 64765) [2018-12-29 11:18:57] miner_result: Sending user result to pool [2018-12-29 11:18:57] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64765","nonce":"aa280040","result":"f84d394527ec04e5bf9dfab181fd968fd6fbaed3983a07fe751b3465c6460000"}} [2018-12-29 11:18:57] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null} [2018-12-29 11:18:57] miner_result: Pool accepted result 0x000046C6 [2018-12-29 11:18:59] miner_result: Sending user result to pool [2018-12-29 11:18:59] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64765","nonce":"75280090","result":"a9d09e3ca6e12eeb260451eaf4f67c7996b9be4a7ca86302e6280ad619300000"}} [2018-12-29 11:19:00] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"090993949de105d961d240b17c4aa4a3e02d9d3d542ed8bd7692b27561a763f161e957a1b077ac0 0000000d332bb0ff3117b0060f9903e9d2be5808e5198984ab375eb39ad55ccbd6448d001","job_id":"64766","target":"cf8b0000"}} [2018-12-29 11:19:00] json_receive: {"id":1,"jsonrpc":"2.0","result":null,"error":{"code":-1,"message":"Block expired"}} [2018-12-29 11:19:00] pool_have_job: Pool sent a new job (ID: 64766) [2018-12-29 11:19:17] miner_result: Sending user result to pool [2018-12-29 11:19:17] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64766","nonce":"0f3300d0","result":"aad84fc4ac5913f6a513e57177aa113779e8882e21051d55fb5d7604cb070000"}} [2018-12-29 11:19:17] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null} [2018-12-29 11:19:17] miner_result: Pool accepted result 0x000007CB [2018-12-29 11:19:40] miner_result: Sending user result to pool [2018-12-29 11:19:40] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64766","nonce":"df8b0070","result":"963eb439b4edfe088e79442d62d5a2a50d9a634489d30260f799b647075d0000"}} [2018-12-29 11:19:40] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null} [2018-12-29 11:19:40] miner_result: Pool accepted result 0x00005D07 [2018-12-29 11:19:54] miner_result: Sending user result to pool [2018-12-29 11:19:54] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64766","nonce":"09bc0040","result":"7403df0c0ee20430427622d4ac91b6c4f19e9c81655cc06409cf89a585210000"}} [2018-12-29 11:19:54] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null} [2018-12-29 11:19:54] miner_result: Pool accepted result 0x00002185 [2018-12-29 11:20:00] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"0909cf949de105d961d240b17c4aa4a3e02d9d3d542ed8bd7692b27561a763f161e957a1b077ac0 0000000bbd2c3819f4b6f4a0cae913c63b6eb98688a653d5c2f786f2f17403ff183140a02","job_id":"64767","target":"cf8b0000"}} [2018-12-29 11:20:00] pool_have_job: Pool sent a new job (ID: 64767) [2018-12-29 11:20:03] watchdog: GPU0 [BUS: 12] hashing speed is 0 H/S [2018-12-29 11:20:03] watchdog: GPU1 [BUS: 27] hashing speed is 0 H/S [2018-12-29 11:20:03] watchdog: GPU4 [BUS: 24] hashing speed is 0 H/S [2018-12-29 11:20:03] watchdog: GPU6 [BUS: 15] hashing speed is 0 H/S [2018-12-29 11:20:14] watchdog: GPU0 [BUS: 12] hashing speed is 0 H/S [2018-12-29 11:20:14] watchdog: GPU1 [BUS: 27] hashing speed is 0 H/S [2018-12-29 11:20:14] watchdog: GPU4 [BUS: 24] hashing speed is 0 H/S [2018-12-29 11:20:14] watchdog: GPU6 [BUS: 15] hashing speed is 0 H/S [2018-12-29 11:20:23] hashrate: GPU0: 0 H/s [BUS:12] [2018-12-29 11:20:23] hashrate: GPU1: 0 H/s [BUS:27] [2018-12-29 11:20:23] hashrate: GPU2: 1885 H/s [BUS:3] [2018-12-29 11:20:23] hashrate: GPU3: 1925 H/s [BUS:18] [2018-12-29 11:20:23] hashrate: GPU4: 0 H/s [BUS:24] [2018-12-29 11:20:23] hashrate: GPU5: 1943 H/s [BUS:9] [2018-12-29 11:20:23] hashrate: GPU6: 0 H/s [BUS:15] [2018-12-29 11:20:23] hashrate: GPU7: 1928 H/s [BUS:21] [2018-12-29 11:20:23] hashrate: Total: 7681 H/s [2018-12-29 11:20:25] watchdog: GPU crash detected, miner will try to restart [2018-12-29 11:20:25] Restarting miner process
Same problem reported here since v1.7.1 or more the vega rig became unstable. My rx580 rig have no problems with v1.7.4. Vega 64 rig with v 1.7.4 get ramdom restarts, and i increase the mv in all gpus, lower intensity , and same problem!!
|
|
|
|
livada
Newbie
Offline
Activity: 417
Merit: 0
|
|
December 29, 2018, 01:50:16 PM |
|
I am using two PSUs with a combined 1900w. The PSU is fine but the breaker is tripped. I also use overdriventool so the power consumption is around 1250w which is not bad at all for monero v8. It is just every few days I got this power surge. And after this happens, I have to start the miner few times to get a 1250w cause the first few starts always get a 1900w power so i have to stop the miner and restarted it.
It could be your intensity or overclock to much. Sometimes a gpu may crash and reset to default settings. Which on vega will increase power a lot. If ppt mod this won't happen. Its not the software. Its your settings I would say It makes sense. Could you take a look at my overdriventool setting? It is a vega 56 with 64 bios. memeory is set to 1100. GPU_P0=852;800;0 GPU_P1=991;900;0 GPU_P2=1084;950;0 GPU_P3=1138;1000;0 GPU_P4=1200;1050;0 GPU_P5=1401;1100;0 GPU_P6=1536; 1150;0 GPU_P7=1552; 840Mem_P0=167;800;0 Mem_P1=500;800;0 Mem_P2=800; 950;0 Mem_P3=1100; 875Fan_Min=2750 Fan_Max=3500 Fan_Target=65 Fan_Acoustic=2400 Power_Temp=75 Power_Target=0 This is the v8 setting for miner. { "cryptonight_type" : "normalv8", "intensity" : 120, "worksize" : 16, "double_threads" : true } Your PPT tabvle is BAD. This is not good. USe this : 1130W form the WALL on v8 - i have 2*700W PSU only and all work fine with 6*vega 56 nitro+ GPU_P0=852;900;0 GPU_P1=991;900;0 GPU_P2=1084;900;0 GPU_P3=1138;900;0 GPU_P4=1150;900;0 GPU_P5=1202;900;0 GPU_P6=1212;900;0 GPU_P7=1442;900 Mem_P0=167;900;0 Mem_P1=500;900;0 Mem_P2=800;900;0 Mem_P3=1100;900 Fan_Min=2300 Fan_Max=4900 Fan_Target=56 Fan_Acoustic=2400 Power_Temp=75 Power_Target=0 or this for low consumation power GPU_P0=852;800;0 GPU_P1=991;801;0 GPU_P2=1084;802;0 GPU_P3=1100;803;0 GPU_P4=1125;804;0 GPU_P5=1150;805;0 GPU_P6=1212;830;0 GPU_P7=1442;850 Mem_P0=167;800;0 Mem_P1=500;800;0 Mem_P2=800;802;0 Mem_P3=1100;860 Fan_Min=2300 Fan_Max=3500 Fan_Target=55 Fan_Acoustic=2400 Power_Temp=75 Power_Target=0
|
|
|
|
MingMining
Member
Offline
Activity: 202
Merit: 10
Eloncoin.org - Mars, here we come!
|
|
December 29, 2018, 10:02:38 PM |
|
I am using two PSUs with a combined 1900w. The PSU is fine but the breaker is tripped. I also use overdriventool so the power consumption is around 1250w which is not bad at all for monero v8. It is just every few days I got this power surge. And after this happens, I have to start the miner few times to get a 1250w cause the first few starts always get a 1900w power so i have to stop the miner and restarted it.
It could be your intensity or overclock to much. Sometimes a gpu may crash and reset to default settings. Which on vega will increase power a lot. If ppt mod this won't happen. Its not the software. Its your settings I would say It makes sense. Could you take a look at my overdriventool setting? It is a vega 56 with 64 bios. memeory is set to 1100. GPU_P0=852;800;0 GPU_P1=991;900;0 GPU_P2=1084;950;0 GPU_P3=1138;1000;0 GPU_P4=1200;1050;0 GPU_P5=1401;1100;0 GPU_P6=1536; 1150;0 GPU_P7=1552; 840Mem_P0=167;800;0 Mem_P1=500;800;0 Mem_P2=800; 950;0 Mem_P3=1100; 875Fan_Min=2750 Fan_Max=3500 Fan_Target=65 Fan_Acoustic=2400 Power_Temp=75 Power_Target=0 This is the v8 setting for miner. { "cryptonight_type" : "normalv8", "intensity" : 120, "worksize" : 16, "double_threads" : true } Your PPT tabvle is BAD. This is not good. USe this : 1130W form the WALL on v8 - i have 2*700W PSU only and all work fine with 6*vega 56 nitro+ GPU_P0=852;900;0 GPU_P1=991;900;0 GPU_P2=1084;900;0 GPU_P3=1138;900;0 GPU_P4=1150;900;0 GPU_P5=1202;900;0 GPU_P6=1212;900;0 GPU_P7=1442;900 Mem_P0=167;900;0 Mem_P1=500;900;0 Mem_P2=800;900;0 Mem_P3=1100;900 Fan_Min=2300 Fan_Max=4900 Fan_Target=56 Fan_Acoustic=2400 Power_Temp=75 Power_Target=0 or this for low consumation power GPU_P0=852;800;0 GPU_P1=991;801;0 GPU_P2=1084;802;0 GPU_P3=1100;803;0 GPU_P4=1125;804;0 GPU_P5=1150;805;0 GPU_P6=1212;830;0 GPU_P7=1442;850 Mem_P0=167;800;0 Mem_P1=500;800;0 Mem_P2=800;802;0 Mem_P3=1100;860 Fan_Min=2300 Fan_Max=3500 Fan_Target=55 Fan_Acoustic=2400 Power_Temp=75 Power_Target=0 Thanks Livada. I used this table and the power consumption is 30w less with almost same hashrate. Let's see if it can be stable for a while. My cards are all reference cards with 64 bios so it may consumes more power I guess.
|
|
|
|
livada
Newbie
Offline
Activity: 417
Merit: 0
|
|
December 29, 2018, 11:01:59 PM |
|
I am using two PSUs with a combined 1900w. The PSU is fine but the breaker is tripped. I also use overdriventool so the power consumption is around 1250w which is not bad at all for monero v8. It is just every few days I got this power surge. And after this happens, I have to start the miner few times to get a 1250w cause the first few starts always get a 1900w power so i have to stop the miner and restarted it.
It could be your intensity or overclock to much. Sometimes a gpu may crash and reset to default settings. Which on vega will increase power a lot. If ppt mod this won't happen. Its not the software. Its your settings I would say It makes sense. Could you take a look at my overdriventool setting? It is a vega 56 with 64 bios. memeory is set to 1100. GPU_P0=852;800;0 GPU_P1=991;900;0 GPU_P2=1084;950;0 GPU_P3=1138;1000;0 GPU_P4=1200;1050;0 GPU_P5=1401;1100;0 GPU_P6=1536; 1150;0 GPU_P7=1552; 840Mem_P0=167;800;0 Mem_P1=500;800;0 Mem_P2=800; 950;0 Mem_P3=1100; 875Fan_Min=2750 Fan_Max=3500 Fan_Target=65 Fan_Acoustic=2400 Power_Temp=75 Power_Target=0 This is the v8 setting for miner. { "cryptonight_type" : "normalv8", "intensity" : 120, "worksize" : 16, "double_threads" : true } Your PPT tabvle is BAD. This is not good. USe this : 1130W form the WALL on v8 - i have 2*700W PSU only and all work fine with 6*vega 56 nitro+ GPU_P0=852;900;0 GPU_P1=991;900;0 GPU_P2=1084;900;0 GPU_P3=1138;900;0 GPU_P4=1150;900;0 GPU_P5=1202;900;0 GPU_P6=1212;900;0 GPU_P7=1442;900 Mem_P0=167;900;0 Mem_P1=500;900;0 Mem_P2=800;900;0 Mem_P3=1100;900 Fan_Min=2300 Fan_Max=4900 Fan_Target=56 Fan_Acoustic=2400 Power_Temp=75 Power_Target=0 or this for low consumation power GPU_P0=852;800;0 GPU_P1=991;801;0 GPU_P2=1084;802;0 GPU_P3=1100;803;0 GPU_P4=1125;804;0 GPU_P5=1150;805;0 GPU_P6=1212;830;0 GPU_P7=1442;850 Mem_P0=167;800;0 Mem_P1=500;800;0 Mem_P2=800;802;0 Mem_P3=1100;860 Fan_Min=2300 Fan_Max=3500 Fan_Target=55 Fan_Acoustic=2400 Power_Temp=75 Power_Target=0 Thanks Livada. I used this table and the power consumption is 30w less with almost same hashrate. Let's see if it can be stable for a while. My cards are all reference cards with 64 bios so it may consumes more power I guess. if you use GPU_P7=1552mz thi use more power. try with 1440mhz and see. my card use 70W more if i use 1500+mhz for 100hr and temp go up 3-4C
|
|
|
|
MingMining
Member
Offline
Activity: 202
Merit: 10
Eloncoin.org - Mars, here we come!
|
|
December 30, 2018, 01:48:33 AM |
|
Thanks Livada. I used this table and the power consumption is 30w less with almost same hashrate. Let's see if it can be stable for a while. My cards are all reference cards with 64 bios so it may consumes more power I guess.
if you use GPU_P7=1552mz thi use more power. try with 1440mhz and see. my card use 70W more if i use 1500+mhz for 100hr and temp go up 3-4C Thanks for the information, Livada. I will leave it for a while to make sure that one is stable. To me, stability is more important.
|
|
|
|
doktor83 (OP)
|
|
December 30, 2018, 07:52:37 AM Last edit: December 30, 2018, 09:39:21 AM by doktor83 |
|
Same problem reported here since v1.7.1 or more the vega rig became unstable. My rx580 rig have no problems with v1.7.4. Vega 64 rig with v 1.7.4 get ramdom restarts, and i increase the mv in all gpus, lower intensity , and same problem!!
Driver version, algo, config file? Does the miner restart, and work ok after that, or system freezes? Can you describe ? Maybe i can find out what is happening It was all ok on 1.7.0 ? Also how often is this happening? Is there any specific case you maybe noticed?
|
|
|
|
GKumaran
Member
Offline
Activity: 204
Merit: 10
|
|
December 30, 2018, 09:41:42 AM |
|
Same problem reported here since v1.7.1 or more the vega rig became unstable. My rx580 rig have no problems with v1.7.4. Vega 64 rig with v 1.7.4 get ramdom restarts, and i increase the mv in all gpus, lower intensity , and same problem!!
Im running a Vega Rig, but has no such issues. Which algo are you having these issues?
|
|
|
|
doktor83 (OP)
|
|
December 30, 2018, 09:42:40 AM |
|
Same problem reported here since v1.7.1 or more the vega rig became unstable. My rx580 rig have no problems with v1.7.4. Vega 64 rig with v 1.7.4 get ramdom restarts, and i increase the mv in all gpus, lower intensity , and same problem!!
Im running a Vega Rig, but has no such issues. Which algo are you having these issues? Are you running the latest 1.7.4?
|
|
|
|
abg00
Jr. Member
Offline
Activity: 288
Merit: 1
|
|
December 30, 2018, 10:37:53 AM |
|
Are you running the latest 1.7.4?
plz fix webchain algo and add rigid in new version
|
|
|
|
doktor83 (OP)
|
|
December 30, 2018, 10:40:18 AM |
|
It's fixed, testing new version atm if all good i will upload it today
|
|
|
|
sharix80
Newbie
Offline
Activity: 31
Merit: 0
|
|
December 30, 2018, 11:09:14 AM |
|
It's fixed, testing new version atm if all good i will upload it today
Good news. Thank you for your efficient work.
|
|
|
|
doktor83 (OP)
|
|
December 30, 2018, 11:24:33 AM |
|
V1.7.5- Added parameter --setup in cmd, which creates basic config files for user in interactive mode - Added 'old_mode' parameter to config outside gpu_conf - Added notification if using old kernel - "worker" set in pools.txt now works for webchain too - Fixed a few things regarding webchain mining + Added parameter --setup that creates basic configuration files for the user in an interactive mode. This is a quick way for beginners to set up everything and start mining. Also added guided-setup.bat in the package that runs the --setup mode. + 'old_mode' was a gpu_conf only parameter until now + Webchain is a weird coin To set the worker-id , use the 'worker' parameter in pools.txt file
|
|
|
|
abg00
Jr. Member
Offline
Activity: 288
Merit: 1
|
|
December 30, 2018, 12:24:31 PM |
|
V1.7.5+ Webchain is a weird coin To set the worker-id , use the 'worker' parameter in pools.txt file worker work but no shares on webchain. hashrate on pool very low
|
|
|
|
abg00
Jr. Member
Offline
Activity: 288
Merit: 1
|
|
December 30, 2018, 12:57:39 PM |
|
1.7.5 bit more on 570\8gb card on tube algo
|
|
|
|
MadSciencist
Newbie
Offline
Activity: 39
Merit: 0
|
|
December 30, 2018, 12:58:13 PM |
|
I haven't mine cryptonight coins for long time. I wanted to switch for haven, but I'm getting only 400h per card (rx580 8GB). I can set intensity to 270 and get over 1200 per card but SRBMiner is not submitting any hashes then. Anything over 50 intensity is not submitting any hashes (tried worksize 4, 8, 16, 32). Any ideas?
|
|
|
|
zeef
Newbie
Offline
Activity: 301
Merit: 0
|
|
December 30, 2018, 01:17:33 PM |
|
Same problem reported here since v1.7.1 or more the vega rig became unstable. My rx580 rig have no problems with v1.7.4. Vega 64 rig with v 1.7.4 get ramdom restarts, and i increase the mv in all gpus, lower intensity , and same problem!!
Driver version, algo, config file? Does the miner restart, and work ok after that, or system freezes? Can you describe ? Maybe i can find out what is happening It was all ok on 1.7.0 ? Also how often is this happening? Is there any specific case you maybe noticed? Hi, For me, yes all same version, algo and config only change version. Occured when i migrate from v1.7.0 to v1.7.2, v1.7.3 and v1.7.4. For me occurs 4-6 hours. System freezes. I notice that in v1.7.0 the auto intensity is set to 60 in my vega 64 setup, in version 1.7.4 the auto set to 56. If i put 56 or 60 in v1.7.0 all ok, no crashes for days.. Regards
|
|
|
|
carlosmonaco
Newbie
Offline
Activity: 105
Merit: 0
|
|
December 30, 2018, 01:26:14 PM |
|
Same problem reported here since v1.7.1 or more the vega rig became unstable. My rx580 rig have no problems with v1.7.4. Vega 64 rig with v 1.7.4 get ramdom restarts, and i increase the mv in all gpus, lower intensity , and same problem!!
Driver version, algo, config file? Does the miner restart, and work ok after that, or system freezes? Can you describe ? Maybe i can find out what is happening It was all ok on 1.7.0 ? Also how often is this happening? Is there any specific case you maybe noticed? For me I get some card hashing speed at 0h/s ( sometimes all together ), then miners restart by itself but failed to start , the system freeze ( restart needed) . I get that error more often after 1.7.0. I post the log just above. Windows 10 , Xmr ( V8) , 1.6.1. PS : I tried to increase mV and lower clock speed and mem speed a lot but I still get this error since srb 1.7.1 on all rigs. ( No computing error before the crash , 1/24h for some)
|
|
|
|
abg00
Jr. Member
Offline
Activity: 288
Merit: 1
|
|
December 30, 2018, 02:17:13 PM |
|
I haven't mine cryptonight coins for long time. I wanted to switch for haven, but I'm getting only 400h per card (rx580 8GB). I can set intensity to 270 and get over 1200 per card but SRBMiner is not submitting any hashes then. Anything over 50 intensity is not submitting any hashes (tried worksize 4, 8, 16, 32). Any ideas?
write config here compute mode on for this card? i=57-59 for 8gb card
|
|
|
|
|