SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[RagingBull]

The new miner program have been using their rigs for a long time. I have no problem with Hash, but after 3 4 days the program turns itself off. I have not yet reached a 1-week working time, and have the same problem as me?

[abg00]

Ok, so looks like i finally resolved the ellesmere 8gb heavy algos thing.
Now they easily hash over 1.1khs.

New version in a few days

good news. possible same trouble as rx 560\4gb on heavy\tube\haven

[Liam_Howlett]

The bat file has the --cgputargettemperature 50,50,50,50,50 parameter. But this option does not work. Absolutely any temperature. How to make srb miner maintain a certain temperature?

[lsHaKeRl]

Oh comon

I got x3 RX Vegas 64 Nitro+ and when I try 1.7.1 I got 200H/s less than 1.7.0..

Could you please share you config ??

My config in 1.7.0 :

{
"cryptonight_type" : "normalv8",
"intensity" : 124,
"double_threads" : true
}

GPU0: Radeon RX Vega [gfx900] [8176 MB][I: 124.0][W: 16][T: 2][F: 4][A: 0][BUS: 9]
GPU1: Radeon RX Vega [gfx900] [8176 MB][I: 124.0][W: 16][T: 2][F: 4][A: 0][BUS: 13]
GPU2: Radeon RX Vega [gfx900] [8176 MB][I: 124.0][W: 16][T: 2][F: 4][A: 0][BUS: 3]

Hi Mate, for sure! Here is my config for V8:


{
"cryptonight_type" : "normalv8",
"intensity" : 0,
"double_threads" : true,
"gpu_conf" :
[
   { "id" : 0, "intensity" : 124, "worksize" : 16, "threads" : 2},
   { "id" : 1, "intensity" : 124, "worksize" : 16, "threads" : 2},
   { "id" : 2, "intensity" : 124, "worksize" : 16, "threads" : 2},
   { "id" : 3, "intensity" : 124, "worksize" : 16, "threads" : 2},
   { "id" : 4, "intensity" : 124, "worksize" : 16, "threads" : 2},
   { "id" : 5, "intensity" : 124, "worksize" : 16, "threads" : 2},
   { "id" : 6, "intensity" : 124, "worksize" : 16, "threads" : 2},
   { "id" : 7, "intensity" : 124, "worksize" : 16, "threads" : 2},
   { "id" : 8, "intensity" : 124, "worksize" : 16, "threads" : 2},
   { "id" : 9, "intensity" : 124, "worksize" : 16, "threads" : 2},
   { "id" : 10, "intensity" : 124, "worksize" : 16, "threads" : 2},
   { "id" : 11, "intensity" : 124, "worksize" : 16, "threads" : 2},
]
}

p.s. try to update the SRB-Miner to version 1.7.1.

Here is a table where you can see the exact information.

https://docs.google.com/spreadsheets/d/1pH326fwnYWC5Jef2FdF4KnJ4CLj0cwDDtGjrlgekk1A/edit#gid=514064850

if you need more help, just contact me, i will try to!!

greetings
Patrick

Patrick,

I can't send you MP..

I just tried your config and .... I don't understand !

My config in SRB Miner 1.7.1 :

{
"cryptonight_type" : "normalv8",
"intensity" : 124,
"double_threads" : true
{

I got 6050 H/s with 3x Sapphire RX Vegas 64 Nitro+

Your config to my rig in SRB Miner 1.7.1 :

{
"cryptonight_type" : "normalv8",
"intensity" : 0,
"double_threads" : true,
"gpu_conf" :
[
   { "id" : 0, "intensity" : 124, "worksize" : 16, "threads" : 2},
   { "id" : 1, "intensity" : 124, "worksize" : 16, "threads" : 2},
   { "id" : 2, "intensity" : 124, "worksize" : 16, "threads" : 2},
]
}

I got 6250 H/s with 3x Sapphire RX Vegas 64 Nitro+

What's happend ?
What is the difference between your config and mine ? In yours you setup your GPU's manually, nothing more .. Is there a bug ?

Do you think I can reach more hashrate with my GPU ?

[2018-11-30 11:54:04] GPU0 :    2084 H/s [T: 60c, RPM: 1146, CC: 1502 MHz, MC: 1105 MHz][BUS:9]
[2018-11-30 11:54:04] GPU1 :    2085 H/s [T: 56c, RPM: 1217, CC: 1502 MHz, MC: 1105 MHz][BUS:13]
[2018-11-30 11:54:04] GPU2 :    2083 H/s [T: 62c, RPM: 1208, CC: 1502 MHz, MC: 1105 MHz][BUS:3]
[2018-11-30 11:54:04] Total:    6252 H/s

Thanks for your help !

Hi Mate!

Sorry for the late answer had long last days, much to do! 

I dont understand your question because i see everything is fine with your Vega´s!?!?!?.. Your Hashrate on V8 is ~2084 H/s, this is absolutely nice!! You have more then
mine, haha.. the different is just, you draw higher powers (1502 Mhz, MC: 1105 Mhz) im drawing with (1408 Mhz, MC: 905 Mhz)

I think you just looked to the stats from Algo: FESTIVAL-COIN? Because this is a lighter Algo! There you can have about ~2100 H/s 

So your hashrates are very good, everything is fine!!

Greetins
Patrick

[lsHaKeRl]

RX VEGA 64 with SRB-Miner V1.7.1

SETUP: 12x Vega 64 Ref/Liquide mix on ASUS B250 Mining Expert

Algo: XMR (Monero)/GRAFT (Graft Coin) on V8

[2018-11-29 23:30:33] GPU0 :    2054 H/s [T: 33c, RPM: 2472, CC: 1408 MHz, MC: 1100 MHz][BUS:28]
[2018-11-29 23:30:33] GPU1 :    2056 H/s [T: 34c, RPM: 2351, CC: 1408 MHz, MC: 1100 MHz][BUS:19]
[2018-11-29 23:30:33] GPU2 :    2059 H/s [T: 35c, RPM: 2369, CC: 1408 MHz, MC: 1100 MHz][BUS:37]
[2018-11-29 23:30:33] GPU3 :    2050 H/s [T: 45c, RPM: 4196, CC: 1408 MHz, MC: 1100 MHz][BUS:34]
[2018-11-29 23:30:33] GPU4 :    2052 H/s [T: 45c, RPM: 4033, CC: 1408 MHz, MC: 1100 MHz][BUS:9]
[2018-11-29 23:30:33] GPU5 :    2057 H/s [T: 33c, RPM: 2417, CC: 1408 MHz, MC: 1100 MHz][BUS:13]
[2018-11-29 23:30:33] GPU6 :    2050 H/s [T: 42c, RPM: 3787, CC: 1408 MHz, MC: 1100 MHz][BUS:31]
[2018-11-29 23:30:33] GPU7 :    2057 H/s [T: 35c, RPM: 2437, CC: 1408 MHz, MC: 1100 MHz][BUS:16]
[2018-11-29 23:30:33] GPU8 :    2049 H/s [T: 44c, RPM: 3999, CC: 1408 MHz, MC: 1100 MHz][BUS:25]
[2018-11-29 23:30:33] GPU9 :    2059 H/s [T: 37c, RPM: 2317, CC: 1408 MHz, MC: 1100 MHz][BUS:40]
[2018-11-29 23:30:33] GPU10:    2052 H/s [T: 35c, RPM: 2413, CC: 1408 MHz, MC: 1100 MHz][BUS:22]
[2018-11-29 23:30:33] GPU11:    2056 H/s [T: 34c, RPM: 2338, CC: 1408 MHz, MC: 1100 MHz][BUS:5]


[2018-11-30 00:29:55] Total:    20732 H/s

more on: https://docs.google.com/spreadsheets/d/1pH326fwnYWC5Jef2FdF4KnJ4CLj0cwDDtGjrlgekk1A/edit#gid=514064850

greetings
Patrick

Patrick, how are you getting your temperatures so low? I get the water cooled ones … but you have a mix there, yeah?  I can usually keep my Vega Cards in the high 50s low 60s using Overdrive settings /w Core at 880MV Mem 900MV but that's about it so I am curious what others are doing to get those temps down.

Hi buddy!

Sorry I'm only now answering, I've been busy the last few days! 

To your question: I regularly clean the fan of my graphics cards, as it is often dust in it and thereby increases the temperatures!

Cleaned fans can already make a difference of 5-10 degrees.

I have water cooled and air cooled cards yes.
But it also makes a difference how far the graphics cards are from each other!
My Mining Rig is on the ground where the temperatures are a bit lower, but draw the air directly from the window into the cards, which means the cards are cooled by 5-10 degrees.

At about 20 degrees room temperature, the water-cooled cards at 2500-3000 rpm should have about 40/45 degrees at full load, on Air-cooled cards at 4000-5000 rpm about 45-55 degrees on full load.

I hope I could help you!

greetings
Patrick

[john1010]

Do you have a non mega link? or is this miner available on github, the file contaminated and contain Trojan virus, hope that you upload it with other provider like github. Thanks

[hin0001]

Just a report on v1.7.1

GPU   : RX 470/480/570/580
Driver : 18.6.1
OS     : Windows 64
Algo   : Haven

ON GPU with 4GB memory (single thread), the hashrate is highest compared to other miner and stable. 

ON GPU with 8GB memory (dual threads), if lucky the hashrate is the highest compared to other miner. (about 50 more)
To reach the highest hasrate(1xxx), we must not touch the rig after start but:
1. if we are not lucky, it may not reach the highest hashrate, it is only 8xx-9xx
2. unstable if we remote the computer using teamviewer, "sometimes" the hashrate will drop and not going up again
3. on some cards the hashrate will reduce overtime to 8xx-9xx and stay at that point

I have done using "fragment"=9999 with different Intensity from 52-59, worksize 8 and 16

Thanks

[novac.]

Hi!
{
"cryptonight_type" : "bittubev2",
"intensity" : 55,
"double_threads" : true
}
Win 10, RX 588, Adrenalin 18.11.1
Update to srbminer 1-7-1 from srbminer 1-6-4.
Now miner closed with error "EXCEPTION 90012. FAULTY HDMI DEVICE INT3H."

Whats wrong?
How to solve this?..

Thanks.

[lsHaKeRl]

Hi!
{
"cryptonight_type" : "bittubev2",
"intensity" : 55,
"double_threads" : true
}
Win 10, RX 588, Adrenalin 18.11.1
Update to srbminer 1-7-1 from srbminer 1-6-4.
Now miner closed with error "EXCEPTION 90012. FAULTY HDMI DEVICE INT3H."

Whats wrong?
How to solve this?..

Thanks.

Hi Mate!

The problem is !You have upgraded your Adrenalin Drivers too high!

Recommended drivers:
Adrenalin 18.5.1, Adrenalin 18.5.2, Adrenalin 18.6.1

DON'T COMPILE kernels on drivers 18.7.1+ because they will create faulty binaries!
If the pre-built binary kernels aren't working you, make sure you use one of the upper mentioned driver versions!
Don't use 18.3.4 and older drivers if you want to mine V8 with Vegas! Your hashrate will be very bad. Instead use minimum 18.5.1 and newer drivers!
If miner can't connect to devfee pool or srbminer.com, switch your dns to 1.1.1.1 or 8.8.8.8

The highest driver can be Adrenalin 18.6.1.
so uninstall your drivers with DDU tool (DriverUninstaller) and install it, it should work then!

I hope i could help you! 

Greetings
Patrick

[twotwosix]

Ok, so looks like i finally resolved the ellesmere 8gb heavy algos thing.
Now they easily hash over 1.1khs.

New version in a few days

Very nice!!

[novac.]

Hi!
{
"cryptonight_type" : "bittubev2",
"intensity" : 55,
"double_threads" : true
}
Win 10, RX 588, Adrenalin 18.11.1
Update to srbminer 1-7-1 from srbminer 1-6-4.
Now miner closed with error "EXCEPTION 90012. FAULTY HDMI DEVICE INT3H."

Whats wrong?
How to solve this?..

Thanks.

Hi Mate!

The problem is !You have upgraded your Adrenalin Drivers too high!

Recommended drivers:
Adrenalin 18.5.1, Adrenalin 18.5.2, Adrenalin 18.6.1

DON'T COMPILE kernels on drivers 18.7.1+ because they will create faulty binaries!
If the pre-built binary kernels aren't working you, make sure you use one of the upper mentioned driver versions!
Don't use 18.3.4 and older drivers if you want to mine V8 with Vegas! Your hashrate will be very bad. Instead use minimum 18.5.1 and newer drivers!
If miner can't connect to devfee pool or srbminer.com, switch your dns to 1.1.1.1 or 8.8.8.8

The highest driver can be Adrenalin 18.6.1.
so uninstall your drivers with DDU tool (DriverUninstaller) and install it, it should work then!

I hope i could help you! 

Greetings
Patrick

Thanks Patrick!
Another question - srbminer shows a total hashrate of 4300Hs, and bittube.miner.rocks shows an average of 3000Hs per day.
pool latency ~ 130ms
stale shares are very rare, maybe about 1%
The difference of Hs in the miner and on the pool is about 30%
What could be the reason for such losses?

[Hansibua]

Hello guys, I have a problem with my miner.
It works all vegas 64 lc individually or in groups with intensity 124 but only 8 cards (of 11 Vegas) at the same time. It was checked by the hardware the cards and the riser. if I start the miner with more than 8 he pulls the rope and the system restarts. What settings do I have to make in win 10 (version 1709)?
vram 250gb
optimizer 4.5
disabled crossfire and enabler ulps
computing mode
and ??


win 10 pro
asus b250
24 gb ram
11 vega 64 lc
srb miner 171
adrenalin 18.6.1
Hbcc deaktiviert

config
"cryptonight_type" : "normalv8",
"intensity" : 124,
"double_threads" : true


installed after "lupaarsen" thread 5359

Please help me?

[Hansibua]

Durch die Berechtigungseinstellungen für "Anwendungsspezifisch" wird dem Benutzer "NT-AUTORITÄT\Lokaler Dienst" (SID: S-1-5-19) unter der Adresse "LocalHost (unter Verwendung von LRPC)" keine Berechtigung vom Typ "Lokal Aktivierung" für die COM-Serveranwendung mit der CLSID
{6B3B8D23-FA8D-40B9-8DBD-B950333E2C52}
 und der APPID
{4839DDB7-58C2-48F5-8283-E1D1807D0D7D}

error 10016 DisrtributedCOM

[lsHaKeRl]

Thanks Patrick!
Another question - srbminer shows a total hashrate of 4300Hs, and bittube.miner.rocks shows an average of 3000Hs per day.
pool latency ~ 130ms
stale shares are very rare, maybe about 1%
The difference of Hs in the miner and on the pool is about 30%
What could be the reason for such losses?

Hi Mate!

This is a very clear thing, mining pools are NEVER exactly, so you can never trust it, trust only the MiningTool, the display in the pools is very inaccurate, in addition it often happens with the pools once more hashrates and once less hashrates is used, so you often have more hash rate by the pool than you actually manage with your graphics cards or even less.

Unfortunately, I do not know if MiningPools only make inaccurate ads or if the pools always need more power and once less for the calculations.
So that's normal.

greetings
Patrick 

[lsHaKeRl]

Hello guys, I have a problem with my miner.
It works all vegas 64 lc individually or in groups with intensity 124 but only 8 cards (of 11 Vegas) at the same time. It was checked by the hardware the cards and the riser. if I start the miner with more than 8 he pulls the rope and the system restarts. What settings do I have to make in win 10 (version 1709)?
vram 250gb
optimizer 4.5
disabled crossfire and enabler ulps
computing mode
and ??


win 10 pro
asus b250
24 gb ram
11 vega 64 lc
srb miner 171
adrenalin 18.6.1
Hbcc deaktiviert

config
"cryptonight_type" : "normalv8",
"intensity" : 124,
"double_threads" : true


installed after "lupaarsen" thread 5359

Please help me?

Hallo Hansibua!

Ich selbst habe auch das B250er mit derzeit 12x RXVega64, bei Mir funktioniert Alles einwandfrei, ich habe sehr viel Erfahrung mit AMD bzw. dem Rig.

1. Schau mal nach ob auch ALLE Vega64 Karten im GeräteManager vorhanden sind.
2. Schau mal nach ob auch die Konfig stimmt also ob es auch IDs von ID 0 - 10 gibt.
3. Schau mal nach ob auch Alle Karten in der RegFile "ENABLE ULPS" und "ENABLECROSSFIREAUTOLINK" auf "0" gesetzt sind UND ob auch nur die Ordner 0001 - 0011 vorhanden sind.
4. Überprüfe BITTE deine BIOS (Flash)Version (ob diese Version die Aktuelle ist -> Vers. 1206)
5. Auf jeden Fall überprüfen ob Du die aktuellsten Windows10 Updates hast (sind derzeit die 1803)

p.s. falls Du Diese nicht hast hier der direkte Link für BIOS Vers.1206 dazu: https://dlcdnets.asus.com/pub/ASUS/mb/LGA1151/B250_MINING_EXPERT/B250-MINING-EXPERT-ASUS-1206.zip?_ga=2.188396008.1737947192.1543879972-1148032904.1543879972


die .CAP Datei einfach auf einen USB-Stick speichern, dann ins BIOS gehn und UPDATEN lassen.

der Rest von Dir schaut sonst gut aus!  

Falls Du TeamSpeak hast oder so, kann ich Dir auch direkt über TeamViewer vielleicht helfen, wäre kein Problem.

Grüße
Patrick

[novac.]

Hi!
{
"cryptonight_type" : "bittubev2",
"intensity" : 55,
"double_threads" : true
}
Win 10, RX 588, Adrenalin 18.11.1
Update to srbminer 1-7-1 from srbminer 1-6-4.
Now miner closed with error "EXCEPTION 90012. FAULTY HDMI DEVICE INT3H."

Whats wrong?
How to solve this?..

Thanks.

Hi Mate!

The problem is !You have upgraded your Adrenalin Drivers too high!

Recommended drivers:
Adrenalin 18.5.1, Adrenalin 18.5.2, Adrenalin 18.6.1

DON'T COMPILE kernels on drivers 18.7.1+ because they will create faulty binaries!
If the pre-built binary kernels aren't working you, make sure you use one of the upper mentioned driver versions!
Don't use 18.3.4 and older drivers if you want to mine V8 with Vegas! Your hashrate will be very bad. Instead use minimum 18.5.1 and newer drivers!
If miner can't connect to devfee pool or srbminer.com, switch your dns to 1.1.1.1 or 8.8.8.8

The highest driver can be Adrenalin 18.6.1.
so uninstall your drivers with DDU tool (DriverUninstaller) and install it, it should work then!

I hope i could help you! 

Greetings
Patrick

Hi!
I change driver from Adrenalin 18.11.1 to 18.6.1.
But the error appears again - "EXCEPTION 90012. FAULTY HDMI DEVICE INT3H."
What else can i do?

[logicalray77]

anyone mind sharing their optimum settings for V8 and Heavy for RX580 8GB please?

[doktor83]

V1.7.2

- Ellesmere 8Gb cards can now reach the full hashing speed on heavy algos
- Rx550 and Rx560 should now be faster on heavy algos by ~8%, and ~5% on V7 algos
- Rewritten a lot of stuff so kernel can now be compiled on newer video drivers too, so no binary kernels provided anymore
- Much faster kernel compilation time
- Removed bralock, aes and kernel parameters
- Added value 9997 and 9998 for fragments which could improve stability on some cards
- heavy_mode 3 (experimental) is now even faster, but still can produce more compute errors than heavy_mode 1, so 1 is still the default

+ Good news, finally got that hashrate stable for the 8GB ellesmere cards on heavy algos (rx470, rx480, rx570, rx580)

+ Miner can now compile working binaries on newer video drivers too, but i don't know about the speeds, i only tested on the latest AMD driver and it is slower than 18.6.1
Maybe there is a driver version that is faster, if someone finds it please share

+ Kernel compilation times are now reduced by a few times

+ Bralock, Aes and Kernel parameters removed, as they are not needed anymore

+ You can now use values 9997 and 9998 for fragments. If you have hashrate instability issues, try them.

+ If you want to see even more speed on heavy algos use heavy_mode 3, but be prepared to get more compute errors than on 1. Test it and see if the hashrate / compute errors ratio satisfies you

[abg00]

1.7.2 best!!!!!
heavy algo

rx570 8g card
old version 1060 unstable

1.7.2 1130 stable
1150\2000-2030

[2018-12-04 12:18:35] GPU0 :    1130 H/s [T: 51c, RPM: 1502, CC: 1150 MHz, MC: 2030 MHz][BUS:1]
[2018-12-04 12:18:35] GPU1 :    1130 H/s [T: 55c, RPM: 1780, CC: 1150 MHz, MC: 2030 MHz][BUS:2]
[2018-12-04 12:18:35] GPU2 :    1128 H/s [T: 58c, RPM: 190, CC: 1150 MHz, MC: 2030 MHz][BUS:3]
[2018-12-04 12:18:35] GPU3 :    1074 H/s [T: 53c, RPM: 2250, CC: 1150 MHz, MC: 1900 MHz][BUS:4]
[2018-12-04 12:18:35] GPU4 :    1131 H/s [T: 53c, RPM: 1671, CC: 1150 MHz, MC: 2030 MHz][BUS:6]
[2018-12-04 12:18:35] GPU5 :    1130 H/s [T: 55c, RPM: 1815, CC: 1150 MHz, MC: 2030 MHz][BUS:7]
[2018-12-04 12:18:35] GPU6 :    1132 H/s [T: 52c, RPM: 1576, CC: 1150 MHz, MC: 2030 MHz][BUS:8]
[2018-12-04 12:18:35] GPU7 :    1172 H/s [T: 58c, RPM: 2591, CC: 1150 MHz, MC: 2000 MHz][BUS:9]

570 4bg also add rate on heavy +30-60 per card

[doktor83]

1.7.2 best!!!!!
heavy algo

rx570 8g card
old version 1060 unstable

1.7.2 1130 stable
1150\2000-2030

[2018-12-04 12:18:35] GPU0 :    1130 H/s [T: 51c, RPM: 1502, CC: 1150 MHz, MC: 2030 MHz][BUS:1]
[2018-12-04 12:18:35] GPU1 :    1130 H/s [T: 55c, RPM: 1780, CC: 1150 MHz, MC: 2030 MHz][BUS:2]
[2018-12-04 12:18:35] GPU2 :    1128 H/s [T: 58c, RPM: 190, CC: 1150 MHz, MC: 2030 MHz][BUS:3]
[2018-12-04 12:18:35] GPU3 :    1074 H/s [T: 53c, RPM: 2250, CC: 1150 MHz, MC: 1900 MHz][BUS:4]
[2018-12-04 12:18:35] GPU4 :    1131 H/s [T: 53c, RPM: 1671, CC: 1150 MHz, MC: 2030 MHz][BUS:6]
[2018-12-04 12:18:35] GPU5 :    1130 H/s [T: 55c, RPM: 1815, CC: 1150 MHz, MC: 2030 MHz][BUS:7]
[2018-12-04 12:18:35] GPU6 :    1132 H/s [T: 52c, RPM: 1576, CC: 1150 MHz, MC: 2030 MHz][BUS:8]
[2018-12-04 12:18:35] GPU7 :    1172 H/s [T: 58c, RPM: 2591, CC: 1150 MHz, MC: 2000 MHz][BUS:9]

570 4bg also add rate on heavy +30-60 per card

now try heavy_mode 3