SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[UnclWish]

anybody tuned intensity param for CNv4 on Vegas?

112 for vega56, 123 for vega64, also try playing with the thread delay parameter

doctor, I have 2 RX 588. On 1st all right, but on 2nd speed max can i get on SRB miner is 1001-1002 h/s on cnr. But on TeamRed miner on this card i have 1045 h/s. Tried different intensities, tried to change thread delay, but can't increase max speed. Windows 10, Drivers is last 19.3.2.

[chimaeraa]

hi doc.
i got this before stop again.

[2019-03-19 06:35:04] json_send[200]: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"384626154776718","job_id":"379878018372315","nonce":"63d96f57","result":"30663415f3114aa9e8a801cf612f83ebc252d60e3ccdc77a37a82791bb190000"}}
[2019-03-19 06:35:04] json_receive[62]: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2019-03-19 06:35:04] miner_result: Pool accepted result 0x000019BB for job[143] [171ms]
[2019-03-19 06:35:28] DevFee pool NOT SET!
[2019-03-19 06:35:28] DevFee pool NOT SET!

i use V 1.8.0.

[doktor83]

anybody tuned intensity param for CNv4 on Vegas?

112 for vega56, 123 for vega64, also try playing with the thread delay parameter

doctor, I have 2 RX 588. On 1st all right, but on 2nd speed max can i get on SRB miner is 1001-1002 h/s on cnr. But on TeamRed miner on this card i have 1045 h/s. Tried different intensities, tried to change thread delay, but can't increase max speed. Windows 10, Drivers is last 19.3.2.

Yes you wrote this already, how can i help you ?  
You are in this a long time ago, you know same cards with same straps & settings won't always give same hashrate..

Someone told me that if he compiles the kernel on 18.6.1 and uses it on 19.2.3, he got better hashrate. Maybe try that.

[doktor83]

hi doc.
i got this before stop again.

[2019-03-19 06:35:04] json_send[200]: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"384626154776718","job_id":"379878018372315","nonce":"63d96f57","result":"30663415f3114aa9e8a801cf612f83ebc252d60e3ccdc77a37a82791bb190000"}}
[2019-03-19 06:35:04] json_receive[62]: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2019-03-19 06:35:04] miner_result: Pool accepted result 0x000019BB for job[143] [171ms]
[2019-03-19 06:35:28] DevFee pool NOT SET!
[2019-03-19 06:35:28] DevFee pool NOT SET!

i use V 1.8.0.

Miner won't stop if devfee pool can't be set/connected ONCE, it will do something only after few hours of trying.
Also why still using 1.8.0 ?

[chimaeraa]

hi doc.
i got this before stop again.

[2019-03-19 06:35:04] json_send[200]: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"384626154776718","job_id":"379878018372315","nonce":"63d96f57","result":"30663415f3114aa9e8a801cf612f83ebc252d60e3ccdc77a37a82791bb190000"}}
[2019-03-19 06:35:04] json_receive[62]: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2019-03-19 06:35:04] miner_result: Pool accepted result 0x000019BB for job[143] [171ms]
[2019-03-19 06:35:28] DevFee pool NOT SET!
[2019-03-19 06:35:28] DevFee pool NOT SET!

i use V 1.8.0.

Miner won't stop if devfee pool can't be set/connected ONCE, it will do something only after few hours of trying.
Also why still using 1.8.0 ?

i don't know why half of my gpu not working and get 0 hash. i think it's about gpu driver.

[UnclWish]

Can anyone share with me kernel files compiled on 18.6.1 Windows 10 driver for cnr RX 580 8Gb card?
Kernel files is on "cache" folder inside miner folder.

[abg00]

hi Dok

test old card with xcash 1.8.1
r7(9) 2gb card

i=0=18 rate 192
i=27 rate 234

plz correst auto intens

[Art Gar]

Can anyone share with me kernel files compiled on 18.6.1 Windows 10 driver for cnr RX 580 8Gb card?
Kernel files is on "cache" folder inside miner folder.

Enjoy
https://yadi.sk/d/AJvgBJ6Aa0r1pw

[UnclWish]

Can anyone share with me kernel files compiled on 18.6.1 Windows 10 driver for cnr RX 580 8Gb card?
Kernel files is on "cache" folder inside miner folder.

Enjoy
https://yadi.sk/d/AJvgBJ6Aa0r1pw

Thanks! I'll try it! Can you make the same with fragments 1 and 2?

[Art Gar]

Can anyone share with me kernel files compiled on 18.6.1 Windows 10 driver for cnr RX 580 8Gb card?
Kernel files is on "cache" folder inside miner folder.

Enjoy
https://yadi.sk/d/AJvgBJ6Aa0r1pw

Thanks! I'll try it! Can you make the same with fragments 1 and 4?

+f1

[clancy182]

hi,

i still have crash after 24 hours of using with 1.8.1
its better than 1.8.0 (crash after 4-6 hours)
no crash before.

GPU0: Radeon RX Vega [gfx900] [8176 MB][I: 112.0][W: 16][T: 2][F: 4][BUS: 9]
GPU1: Radeon RX Vega [gfx900] [8176 MB][I: 112.0][W: 16][T: 2][F: 4][BUS: 12]
GPU2: Radeon RX Vega [gfx900] [8176 MB][I: 112.0][W: 16][T: 2][F: 4][BUS: 6]
GPU3: Radeon RX Vega [gfx900] [8176 MB][I: 112.0][W: 16][T: 2][F: 4][BUS: 3]
-----------------------------------------------------------------------------
SRBMiner Cryptonight AMD GPU miner 1.8.1
DevFee ~0.85%
Press 's' to display stats
Press 'h' to display hashrate
Press 'r' to reload pools
Press 'p' to switch to the next pool
Press 'o' to switch to the previous pool
Press 0-9 to disable/enable GPU while mining
-----------------------------------------------------------------------------
Algorithm               : Cryptonight V4 (R)
Algo switching          : disabled
Startup monitor         : enabled
Gpu watchdog            : enabled [normal mode]
Coin forking            : disabled

[RuMiner]

confirm. having crashes every 6-9 hours on CNv4

[UnclWish]

Can anyone share with me kernel files compiled on 18.6.1 Windows 10 driver for cnr RX 580 8Gb card?
Kernel files is on "cache" folder inside miner folder.

Enjoy
https://yadi.sk/d/AJvgBJ6Aa0r1pw

Thanks! I'll try it! Can you make the same with fragments 1 and 4?

+f1

Sorry, f4 exists. Need f1 and f2.

[Art Gar]

Can anyone share with me kernel files compiled on 18.6.1 Windows 10 driver for cnr RX 580 8Gb card?
Kernel files is on "cache" folder inside miner folder.

Enjoy
https://yadi.sk/d/AJvgBJ6Aa0r1pw

Thanks! I'll try it! Can you make the same with fragments 1 and 4?

+f1

Sorry, f4 exists. Need f1 and f2.

+f2

[nars28]

I'm having crashes with 1.8.1 too on V4. Last time it was bulletproof on V8.

[chimaeraa]

hi doc.
 do you know  i love you ?!!!!  

[2019-03-20 11:30:00] Startup monitor attached
[2019-03-20 11:30:00] Miner version: 1.8.1
[2019-03-20 11:30:00] Windows version: 10.0 build 17763
[2019-03-20 11:30:00] Video driver version: 25.20.15027.5007
[2019-03-20 11:30:07] AMD Platform ID: 0
[2019-03-20 11:30:07] AMD platform FOUND

i did install Radeon Adrenalin-19.3.2 and use your last srbminer . it's lock beautiful    it's about 12H and nothing happen but F***  XMR always got crash not impotent .

whit ODNTools 0.2.8 and new driver you don't need anything else . no power tabel no reg edit no ..... just set in ODNTools  and rich best P/H -

( i rich 2300 H/S in Vega 64 Air XMR whit G 1650-v950 and M1300-v950) but i don't push it hard ,maybe it rich 2600 H/S !!!!!!!!!!!!!!!!!??

also you can use amd wattman whit lot of access in every part of your gpu hardware whit lot of api to control it....!!! i think you like it . try it.

thank you lot.

also i have on Q. when i did config my rige i connect and DC from pool . every time in same Block high i get different job to do. i find some job is easy , hard  or endless loop. can you add some option to miner if last  shear time find or AVG  time more than x Sec just get new job from pool???
( i find 3 block in 5 min when config my rige in solo mining)

[SamAlackass]

Hi all, I'm getting a lot of low difficulty rejects with 1.8.1 so I can't properly test. I'm back to 1.8.0 for now but it's crashing often without any indication in the logs.

[chimaeraa]

it's page file

- System

  - Provider

   [ Name]  Application Error
 
  - EventID 1000

   [ Qualifiers]  0
 
   Level 2
 
   Task 100
 
   Keywords 0x80000000000000
 
  - TimeCreated

   [ SystemTime]  2019-03-20T10:06:13.494663500Z
 
   EventRecordID 2069
 
   Channel Application
 
   Computer DESKTOP-3QESJPQ
 
   Security
 

- EventData

   SRBMiner-CN.exe
   1.8.1.0
   00000000
   ntdll.dll
   10.0.17763.348
   ca65c822
   c0000374
   00000000000faf49
   1cbc
   01d4def2eaa5a99b
   C:\Users\mahdi\Desktop\SRBMiner-CN-V1-7-0\SRBMiner-CN-V1-7-0\SRBMiner-CN.exe
   C:\Windows\SYSTEM32\ntdll.dll
   bfbe991a-82da-4d77-aa33-83b28f32d57c

- System

  - Provider

   [ Name]  Application Popup
   [ Guid]  {47bfa2b7-bd54-4fac-b70b-29021084ca8f}
 
   EventID 26
 
   Version 0
 
   Level 4
 
   Task 0
 
   Opcode 0
 
   Keywords 0x8000000000000000
 
  - TimeCreated

   [ SystemTime]  2019-03-20T10:06:13.471720400Z
 
   EventRecordID 2377
 
   Correlation
 
  - Execution

   [ ProcessID]  536
   [ ThreadID]  68
 
   Channel System
 
   Computer DESKTOP-3QESJPQ
 
  - Security

   [ UserID]  S-1-5-18
 

- EventData

  Caption Windows - Virtual Memory Minimum Too Low
  Message Your system is low on virtual memory. Windows is increasing the size of your virtual memory paging file. During this process, memory requests for some applications may be denied. For more information, see Help. 

[RuMiner]

it's page file

I don't have same event regarding swap file. also it is set to 70Gb for 8 cards, so it's not the main reason

[doktor83]

it's page file

I don't have same event regarding swap file. also it is set to 70Gb for 8 cards, so it's not the main reason

My guess is that i have a bug somwhere in my net code, so i am fully rewriting it, it's going to take some time, but i hope it will fix these annoying random crashes