SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[issie81]

heavy algo (haven) hashing at 1800HR superb
doing V8 algo i get like 1300 to 1400HR

what's up?

something on your side is up

tried multiple rigs

I: 56 (heavy loves this)
WS: 8

--resetvega --ccryptonighttype normalv8 --cgpuid 0,1,2,3,4 --cgpuworksize 8,8,8,8,8 --cgpuintensity 56,56,56,56,56 --cgputhreads 2,2,2,2,2 --sendallstales --enableduplicategpuid --gpureorder

this is extremly good for heavy, but what is going on V8, if i switch back to heavy everything goes like charm..

Intensity 56 is too low for V8, if im right you have a vega, so set it to :

intensity : 112
worksize: 16

doing this gives me 1900HR shouldnt be above 2000:)

[1675703751]

1675703751

[1675703751]

1675703751

[1675703751]

1675703751

[justoiurii]

Dok, could you advise right intensity and worksize for rx 480 8 g bc drivers?

[defoto]

if someone has managed to get Tube2 version 1.7.1 to Rx 580 8 GB without fail it will be thankful to share settings.with adrenaline 18.6.1 I tried a lot of combinations but for now without success. "heavy_mode": 3,"Fragments": 9999 was the best I got on 7 cards - 8310 h/s on heavy,  but one of seven cards did not go away."intensity" : 58.   Doc, how do you benchmark the cards when running the program? It is interesting that with the same settings they give different crashes. Have one reached half or some percentage of their power and there are stuck?

[sky2018miner]

In the global sense, the best version for older maps of the Citcairns for me is the older version 1.6.0. It is a bit slower, but did not fail where I used it
  1.6.4 works with errors but not everywhere, but faster

[zaganiori]

Hello to all,
My problem continues and never solved.(change dns with 1.1.1.1, 1.0.0.1, or 8.8.8. in any version except old 1.6.4 (haven miner)

Warning! Could not connect to a devfee pool for a long time. Please check you firewall/antivirus
 is not blocking connections. Until then i will take a break.
GPU devices disabled!

every 12 hours i must restart my miner.

[hmgp]

Hey Dok.

Thanks for the constant updates on the miner.

Tried the last one and it seems I've lost 150 hs on each vega 56 on haven compared to the last one.

My config is as simple as possible. I did try to play with the values but it doesn't affect it. The miner starts above 6700 for 4 vega, then drops slowly to 6300 / 6200. Does seem watts are down a bit...

Any tips?

Thanks

If you don't really want to play try :


"intensity" : 61,
"double_threads" : true,
"worksize" : 9,
"fragments" : 1,
"aes" : 0,
"bralock" : 32,
"heavy_mode" : 2

Thanks! My best Vega does 1720 now. Average is 1700. Power went up 40 W on the rig, but that's ok. Don't get the mentioned 1800 yet

[Ultrasonik]

SRBminer  amd rx470 8 GB
old  v1.6.7    1004 h/s
new v1.7.1    968   h/s
Algo:cryptonight-saber (bittube)


 

[twotwosix]

SRBminer  amd rx470 8 GB
old  v1.6.7    1004 h/s
new v1.7.1    968   h/s
Algo:cryptonight-saber (bittube)

http://i65.tinypic.com/wgu51k.jpg

What config for both?
 

[Ultrasonik]

SRBminer  amd rx470 8 GB
old  v1.6.7    1004 h/s
new v1.7.1    968   h/s
Algo:cryptonight-saber (bittube)



What config for both?
 

pools_tube2.txt
{
"pools" :
[
   {
      "pool" : "tube.ingest.cryptoknight.cc:5631",
      "wallet" : "bxcVQSwjWm2NaemPUZwBFaDUemx25sPCgFu2i66hjXdmPu1JwRewxKdffrb5VARu4wTfGYn9ngTGz2a YdRc8eBMX1dvJX6tum.27000",
      "password" : "rx470"
   }
]
}

BAT
SRBMiner-CN.exe --config Config\config-bittubev2.txt --pools pools_tube2.txt

+bios modd mem timings

[abg00]

SRBminer  amd rx470 8 GB
old  v1.6.7    1004 h/s
new v1.7.1    968   h/s
Algo:cryptonight-saber (bittube)


 

check i=58 mode 2 f=0

[Ultrasonik]

check i=58 mode 2 f=0

i check all manual settings on 1.7.1   
they all give worse results, went through all the combinations
but more than automatic mode they did not give
-combination last driver + 1.6.7 (possibly .1.6.
 only valid for Algo: cryptonight-saber

[KolordZ]

Hello guys !

I did the update to 1.7.1 but I have lost 300 H/s. I'm mining Normal V8

I have 3 Sapphire RX Vegas 64 Nitro+

Config in 1.7.0 :

{
"cryptonight_type" : "normalv8",
"intensity" : 124,
"double_threads" : true
}

GPU0: Radeon RX Vega [gfx900] [8176 MB][I: 124.0][W: 16][T: 2][F: 4][A: 0][BUS: 9]
GPU1: Radeon RX Vega [gfx900] [8176 MB][I: 124.0][W: 16][T: 2][F: 4][A: 0][BUS: 13]
GPU2: Radeon RX Vega [gfx900] [8176 MB][I: 124.0][W: 16][T: 2][F: 4][A: 0][BUS: 3]

I tried to put same config in 1.7.1 but lost 300 H/s...

Drivers : 18.6.1
I tried to play with "aes" ; "fragments" and "bralock"  but nothing good ..

Going back to 1.7.0 ...

Any tips ?

[Hansibua]

ist es möglich mit 11 vega 64 zu Arbeiten
9 arbeiten ohne Problem

Was muss ich beachten

win 10
B250
18.6.1

[tanatana]

MSI r9 390 default gpu/memory speed 632 H SRBMiner-CN-V1-7-1

{
"cryptonight_type" : "normalv8",
"intensity" : 0,
"gpu_conf" :
[
   { "id" : 0, "intensity" : 64, "worksize" : 8, "threads" : 1},
   { "id" : 1, "intensity" : 64, "worksize" : 8, "threads" : 1}
]
}

[neogeo]

test lot of cards
on tube

rx470\480\570\580 4gb +50-60 h\s in heavy 3 mode
1.7.1 820-860 h\s

and old trouble with 8gb 470\480\570\580 card. test with different config. -70-80 h\s
back to 1.6.7

test 560 4 gb card
1.6.9 508 h\s
1.7.1 440 h\s

560 2 gb
1.7.0 380 h\s
1.7.1 406 h\s

550 2 gb and 4 gb same rate

What's the value for Fragmets and Bralock for 470/570/580 4GB for Tube???
TNX

[KhorneFlake]

Ok, wanted to make another report. For the past 12 hours both of my GPUs are mining at their full capability, both going above 1750H/s. But before I restarted the PC one of them was like 900-1100h/s. And I'm sure, as always, that the second GPU will drop to the cca 1000 at any moment. Everything seems so random, I cannot pinpoint at any setting or config to tweak and say I did this thing and it works properly now. I simply downloaded the latest 1.7.1 version and inserted my wallet into the config. It was mining with one GPU at 1750h/s, and the other one always started at 1100 and dropped to 900 eventually. So, yeah. Really not sure what I can do myself for that matter.

Edit: I'm also using the latest 18.11.2 driver.


Edit2: Ok, I just played a video on YouTube and it dropped to 1100h/s right off…. And it stays like that the whole time now. *sigh*

[Dripac]

MSI r9 390 default gpu/memory speed 632 H SRBMiner-CN-V1-7-1

{
"cryptonight_type" : "normalv8",
"intensity" : 0,
"gpu_conf" :
[
   { "id" : 0, "intensity" : 64, "worksize" : 8, "threads" : 1},
   { "id" : 1, "intensity" : 64, "worksize" : 8, "threads" : 1}
]
}

Try Intesity 71 805H 1040/1500

[playfast]

"persistent_memory" : true is good for the Heavy algo, I was able to go a bit higher with intensities on my 2gb rx560's.
I also notice Heavy can be tweaked with smaller intensity increments than v8. It can respond to 0.04 increments (like 12.60>12.64>12.68 and so on) to find best hashrates.

[tanatana]

MSI r9 390 default gpu/memory speed 632 H SRBMiner-CN-V1-7-1

{
"cryptonight_type" : "normalv8",
"intensity" : 0,
"gpu_conf" :
[
   { "id" : 0, "intensity" : 64, "worksize" : 8, "threads" : 1},
   { "id" : 1, "intensity" : 64, "worksize" : 8, "threads" : 1}
]
}

Try Intesity 71 805H 1040/1500

"cryptonight_type" : "normalv8",
"intensity" : 0,
"gpu_conf" :
[
   { "id" : 0, "intensity" : 96, "worksize" : 12, "threads" : 1},
   { "id" : 1, "intensity" : 96, "worksize" : 12, "threads" : 1}
]
}

speed 755 H

[Dripac]

@tanatana sorry i give you wrong setup for 390. This is my setup:

{
"cryptonight_type" : "normalv8",
"intensity" : 48,
"double_threads" : true
}