Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Balgun]

i had 5xxx payouts.

[Meech]

I have the latest running in win10 and changed page file to 16gb but after 5 mins rig reboots.  Running 4 290x's with Lepa 1600w psu.  Anyone else have this happen?  Sorry if it's been asked before.

[fr4nkthetank]

Mining with Claymore and get full HDD (128GB SSD)  in half hour.
After checking find /var/log/syslog and kern.log  grown up to 52GB each.
System write this 4 messages about 4-5 thousands per second ! 

Code:

Jul  9 23:58:37 test-rig kernel: [ 1399.017519] VM fault (0x01, vmid 6) at page 135290427, read from 'TC3' (0x54433300) (196)
Jul  9 23:58:37 test-rig kernel: [ 1399.017554] amdgpu 0000:04:00.0: GPU fault detected: 147 0x01c84801
Jul  9 23:58:37 test-rig kernel: [ 1399.017557] amdgpu 0000:04:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x08105E39
Jul  9 23:58:37 test-rig kernel: [ 1399.017559] amdgpu 0000:04:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C048001

Jul  9 23:58:37 test-rig kernel: [ 1399.017561] VM fault (0x01, vmid 6) at page 135290425, read from 'TC4' (0x54433400) (72)
Jul  9 23:58:37 test-rig kernel: [ 1399.017567] amdgpu 0000:01:00.0: GPU fault detected: 147 0x01f08801
Jul  9 23:58:37 test-rig kernel: [ 1399.017569] amdgpu 0000:01:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x08105E3E
Jul  9 23:58:37 test-rig kernel: [ 1399.017570] amdgpu 0000:01:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C088001

Jul  9 23:58:37 test-rig kernel: [ 1399.017572] VM fault (0x01, vmid 6) at page 135290430, read from 'TC6' (0x54433600) (136)
Jul  9 23:58:37 test-rig kernel: [ 1399.017607] amdgpu 0000:04:00.0: GPU fault detected: 147 0x01e84801
Jul  9 23:58:37 test-rig kernel: [ 1399.017610] amdgpu 0000:04:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x08105E3D
Jul  9 23:58:37 test-rig kernel: [ 1399.017612] amdgpu 0000:04:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C048001

Despite this mine worked properly 24.3 MH/s on each card until the disk is full
Someone also stumbled upon a similar problem?


System:
Lubuntu 16.04  with amdgpu-pro_16.30.3

5x RX 480 8GB ref model
Asrock FM2A88X + BTC

turn off log files.  go to page one of this thread and find the appropriate -xx string to put in your .bat file.  I forgot what it was.  I suggest everyone turn off their log files unless you have problems.

[citronick]

Mining with Claymore and get full HDD (128GB SSD)  in half hour.
After checking find /var/log/syslog and kern.log  grown up to 52GB each.
System write this 4 messages about 4-5 thousands per second ! 

Code:

Jul  9 23:58:37 test-rig kernel: [ 1399.017519] VM fault (0x01, vmid 6) at page 135290427, read from 'TC3' (0x54433300) (196)
Jul  9 23:58:37 test-rig kernel: [ 1399.017554] amdgpu 0000:04:00.0: GPU fault detected: 147 0x01c84801
Jul  9 23:58:37 test-rig kernel: [ 1399.017557] amdgpu 0000:04:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x08105E39
Jul  9 23:58:37 test-rig kernel: [ 1399.017559] amdgpu 0000:04:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C048001

Jul  9 23:58:37 test-rig kernel: [ 1399.017561] VM fault (0x01, vmid 6) at page 135290425, read from 'TC4' (0x54433400) (72)
Jul  9 23:58:37 test-rig kernel: [ 1399.017567] amdgpu 0000:01:00.0: GPU fault detected: 147 0x01f08801
Jul  9 23:58:37 test-rig kernel: [ 1399.017569] amdgpu 0000:01:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x08105E3E
Jul  9 23:58:37 test-rig kernel: [ 1399.017570] amdgpu 0000:01:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C088001

Jul  9 23:58:37 test-rig kernel: [ 1399.017572] VM fault (0x01, vmid 6) at page 135290430, read from 'TC6' (0x54433600) (136)
Jul  9 23:58:37 test-rig kernel: [ 1399.017607] amdgpu 0000:04:00.0: GPU fault detected: 147 0x01e84801
Jul  9 23:58:37 test-rig kernel: [ 1399.017610] amdgpu 0000:04:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x08105E3D
Jul  9 23:58:37 test-rig kernel: [ 1399.017612] amdgpu 0000:04:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C048001

Despite this mine worked properly 24.3 MH/s on each card until the disk is full
Someone also stumbled upon a similar problem?


System:
Lubuntu 16.04  with amdgpu-pro_16.30.3

5x RX 480 8GB ref model
Asrock FM2A88X + BTC

turn off log files.  go to page one of this thread and find the appropriate -xx string to put in your .bat file.  I forgot what it was.  I suggest everyone turn off their log files unless you have problems.

-dbg   debug log and messages. "-dbg 0" - (default) create log file but don't show debug messages.
   "-dbg 1" - create log file and show debug messages. "-dbg -1" - no log file and no debug messages.

-logfile debug log file name. After restart, miner will append new log data to the same file. If you want to clear old log data, file name must contain "noappend" string.
   If missed, default file name will be used.

[osnwt]

find the appropriate -xx string to put in your .bat file.  I forgot what it was.  I suggest everyone turn off their log files unless you have problems.

Anybody reads what's written in the question?

First, it is Linux, there's no .bat file.
Second, it's not a miner log, it's system log, Linux kernel messages.

I think only Claymore can give any answers. But it might be the result of using amdgpu-pro drivers and newest cards. AMD drivers are not the best written software as was mentioned few times.

[fittsy]

Has anyone been able to conclude whether it remains more profitable to mine ETH+DCR vs that of ETH+SIA on 290/390s?

For me, DCR wasn't profitable. SIA is.

I may end up paying for it in extra power consumption though

[fittsy]

Anyone get paid yet by Nanopool?

Yes. I can confirm I have been paid by Nanopool.

@Madmartyk's reply already covers the minimum required to get paid. (at least 5000 SIA, once per day)

[tytanick]

Mining with Claymore and get full HDD (128GB SSD)  in half hour.
After checking find /var/log/syslog and kern.log  grown up to 52GB each.
System write this 4 messages about 4-5 thousands per second ! 

Code:

Jul  9 23:58:37 test-rig kernel: [ 1399.017519] VM fault (0x01, vmid 6) at page 135290427, read from 'TC3' (0x54433300) (196)
Jul  9 23:58:37 test-rig kernel: [ 1399.017554] amdgpu 0000:04:00.0: GPU fault detected: 147 0x01c84801
Jul  9 23:58:37 test-rig kernel: [ 1399.017557] amdgpu 0000:04:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x08105E39
Jul  9 23:58:37 test-rig kernel: [ 1399.017559] amdgpu 0000:04:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C048001

Jul  9 23:58:37 test-rig kernel: [ 1399.017561] VM fault (0x01, vmid 6) at page 135290425, read from 'TC4' (0x54433400) (72)
Jul  9 23:58:37 test-rig kernel: [ 1399.017567] amdgpu 0000:01:00.0: GPU fault detected: 147 0x01f08801
Jul  9 23:58:37 test-rig kernel: [ 1399.017569] amdgpu 0000:01:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x08105E3E
Jul  9 23:58:37 test-rig kernel: [ 1399.017570] amdgpu 0000:01:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C088001

Jul  9 23:58:37 test-rig kernel: [ 1399.017572] VM fault (0x01, vmid 6) at page 135290430, read from 'TC6' (0x54433600) (136)
Jul  9 23:58:37 test-rig kernel: [ 1399.017607] amdgpu 0000:04:00.0: GPU fault detected: 147 0x01e84801
Jul  9 23:58:37 test-rig kernel: [ 1399.017610] amdgpu 0000:04:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x08105E3D
Jul  9 23:58:37 test-rig kernel: [ 1399.017612] amdgpu 0000:04:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C048001

Despite this mine worked properly 24.3 MH/s on each card until the disk is full
Someone also stumbled upon a similar problem?


System:
Lubuntu 16.04  with amdgpu-pro_16.30.3

5x RX 480 8GB ref model
Asrock FM2A88X + BTC

Hi, i have the same problem in my new project : http://simplemining.net/
Anyway it doesnt bother mining and about logs you can turn then off:
as root execute this command and you will have no longer such problem systemctl disable rsyslog.service
then delete big file logs from /var/log/ adn reboot system, then it will work fine.
If you want i will release my http://simplemining.net/ Operating System which will have this fix and many more + feature updates.
If you want make donation BTC: 1ERRVbvV23h51ScH73nQr6TDmaieKNuuVD

[tytanick]

is anyone mining on nicehash ?
Can you post your exact config here ?

[adamvp]

there was some people mining. you could check few pages before,

[TR8888]

Oh my this dual mining adds some heat! 10-12c per card and in July (summer here) it's just too hot (multiple 280x rigs here)

[rednoW]

Oh my this dual mining adds some heat! 10-12c per card and in July (summer here) it's just too hot (multiple 280x rigs here)

Try mining exp+sia = on tahiti it will give you +20 degree more ))) (a sort of bad advice)) )

[agente]

I'm mining sia on nanopool but i cannot use worker name:

"-eworker workername -dcoin sc -dpool http://sia-eu1.nanopool.org:9980/miner/header?address=blabla" doesn't work. Someone use worker name with claymore miner and nanopool?

[Fanpant]

Oh my this dual mining adds some heat! 10-12c per card and in July (summer here) it's just too hot (multiple 280x rigs here)

If you undervolt and underclock the GPU, you might get higher efficiency and lower temperature. Have you tried that?

[drr0ss]

I'm mining sia on nanopool but i cannot use worker name:

"-eworker workername -dcoin sc -dpool http://sia-eu1.nanopool.org:9980/miner/header?address=blabla" doesn't work. Someone use worker name with claymore miner and nanopool?

This worked from me:
-dpool http://sia-eu1.nanopool.org:9980/miner/header?address="123" -dcoin sia - without worker name
Are you put an option -mode 0 or leave without "-mode" parameter (default)?
And what exactly not wok? You will have in red messages in cmd?
Try to put option -dcoin sc on the end of cmd.

[merc84]

Oh my this dual mining adds some heat! 10-12c per card and in July (summer here) it's just too hot (multiple 280x rigs here)

Try mining exp+sia = on tahiti it will give you +20 degree more ))) (a sort of bad advice)) )

Exp sure does crank up the heat over plain Eth, i guess it increases power draw too but i've been to lazy to check with my watt meter.

[agente]

I'm mining sia on nanopool but i cannot use worker name:

"-eworker workername -dcoin sc -dpool http://sia-eu1.nanopool.org:9980/miner/header?address=blabla" doesn't work. Someone use worker name with claymore miner and nanopool?

This worked from me:
-dpool http://sia-eu1.nanopool.org:9980/miner/header?address="123" -dcoin sia - without worker name
Are you put an option -mode 0 or leave without "-mode" parameter (default)?
And what exactly not wok? You will have in red messages in cmd?
Try to put option -dcoin sc on the end of cmd.

My rigs works good and mining eth+sia... the problem is that i want to see worker name in sia nanopool and i cannot set up. I have many rigs and i need it

[Claymore]

I'm mining sia on nanopool but i cannot use worker name:

"-eworker workername -dcoin sc -dpool http://sia-eu1.nanopool.org:9980/miner/header?address=blabla" doesn't work. Someone use worker name with claymore miner and nanopool?

This worked from me:
-dpool http://sia-eu1.nanopool.org:9980/miner/header?address="123" -dcoin sia - without worker name
Are you put an option -mode 0 or leave without "-mode" parameter (default)?
And what exactly not wok? You will have in red messages in cmd?
Try to put option -dcoin sc on the end of cmd.

My rigs works good and mining eth+sia... the problem is that i want to see worker name in sia nanopool and i cannot set up. I have many rigs and i need it

It's a good idea to read first post of this thread. Check "SAMPLE USAGE" section:

ethpool, ethermine  (and Siacoin pool with worker name):
   EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -dpool "http://sia-eu1.nanopool.org:9980/miner/header?address=YourSiaAddress&worker=YourWorkerName" -dcoin sia

or

 nanopool Ethereum+Siacoin:
EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal YOUR_ETH_WALLET/YOUR_WORKER/YOUR_EMAIL -epsw x -dpool "http://sia-eu1.nanopool.org:9980/miner/header?address=YOUR_SIA_WALLET&worker=YOUR_WORKER_NAME&email=YOUR_EMAIL" -dcoin sia

Don't forget quotes if you pass parameters in command line. If you use "config.txt" for options, quotes can be skipped.

[osnwt]

-eworker does not work for SIA with this miner, it seems to be stratum option for Ethereum, but SC uses getwork protocol with parameters passed in the URL string.

Also when you put some command line in Windows or Linux, there are special characters treated specifically. One of such characters is '&'. Here is a cut from manual:

& [...]  command1 & command2
Use to separate multiple commands on one command line. Cmd.exe runs the first command, and then the second command.

The URL scheme used to pass arguments to pool uses '&' to separate arguments. This means that to use it this way the command line argument must either be properly escaped or quoted, so this character is not processed as command separator, but used as a part of argument string. So the line with ".../miner/header?address=X&worker=Y&email=Z" MUST be in quotes. Otherwise you will get error since anything after '&' will be interpreted as another command.

Another option is to use dpools.txt, where a pool for SIA may look like mine:

Code:

POOL: http://sia-eu1.nanopool.org:9980/miner/header?address=a3d...278&worker=myrig&email=me@example.com

Since dpools.txt is not processed by a command shell (cmd.exe on Windows or bash on Linux), it does not require quotes.

[tytanick]

THE FIRST VERSION v200 HAS BEEN RELEASED. More info on website.
It uses claymore's v5.0 miner
simplemining.net