|
Meech
|
 |
July 11, 2016, 01:22:36 AM |
|
I think anyone claiming to make more on sia alone rather than mining ether has their calculations wrong. Also the only interest in sia is the fact you can dual mine it.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Each block is stacked on top of the previous one. Adding another block to the top makes all lower blocks more difficult to remove: there is more "weight" above each block. A transaction in a block 6 blocks deep (6 confirmations) will be very difficult to remove.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
zatara15
Newbie
 Offline
Activity: 6
Merit: 0
|
|
July 11, 2016, 02:11:00 AM |
|
It crashes at DAG creation. Usually due to overclocking or weak PSU. Also try "-gser 2" option if you have several cards like in your log.
Hey, played around with it. -gser 2 did not make a difference, but if I remove SIA minning and it works. Is there anyway to make both work? On eth it is running no problems. Thanks -Art Just started first tests with eth+sia miner, no problems with my 2x295 rig. Single 295x2 47MH eth + 1.4GH sc, 445 watts from the wall. Testing continues... Can you give me some info on your set up please. I got 2 2x295 with a 1325W platinum power supply. My first thought was the power, but then I tried one card and same crash. How much ram are you running? what operating system? you should be hashing 50 - 51 (if you are hashing lower, check the temp of the card, it should be below 74 or you're throttling. Right now mine 2 are on Claymore mining eth and hashing 115 in the miner and around 95 - 115 in ethpool. Can i see the code you use in the Start file? how did you set up your virtual memory? min/max? Thank you -Art |
|
|
|
|
|
Tmdz
|
|
July 11, 2016, 02:13:20 AM |
|
Dual mining over just sia is marginal at best and then you have to take in account of the added heat and strain on the gpu's (its summer). Pretty soon the profits on sia will vanish after the next diff update and then its dual mine or eth only, maybe feathercoin.
|
|
|
|
|
adaseb
Legendary
Offline
Activity: 3752
Merit: 1710
|
|
July 11, 2016, 02:14:45 AM |
|
Anyway to add worker name to Claymore? Seems to work with GOminer
"address=YOUR_WALLET_ADDRESS&worker=YOUR_WORKER_NAME&email=YOUR_EMAIL" -edit- copypaste from nanopool help Thanks works only in config.txt however, not in the bat file After much testing if you have any Tahiti based cards like 7950/7970/280x , you should just mine SIA directly. You will make almost double over ETH.
Pitcairn or Hawaii based cards like 270x,370,290 and the results aren't as good.
However it uses about 25% more power to mine SIA than ETH.
what speeds are you getting with those Tahitis? Can you mine only SIA with claymore´s? 7970/280x get 900MH/s I think anyone claiming to make more on sia alone rather than mining ether has their calculations wrong. Also the only interest in sia is the fact you can dual mine it.
Probably more profitable for 1 more day until the difficulty adjusts 50% |
|
|
|
nietzsche26
Newbie
Offline
Activity: 2
Merit: 0
|
|
July 11, 2016, 02:18:58 AM |
|
Someone please help! When I try to mine with RX480, the miner crashes. A have 3 card - 2x270X and 1xRX480. If i try to mine with only 270X, there is no problem, but if I try to mine with all 3 or just with the polaris - the miner crashes. I post last rows from log file:
01:40:59:271 d20 Total cards: 3
01:40:59:287 d20 Initializing...
01:40:59:303 d20 GPU #0 recognized as Radeon RX 480
01:40:59:303 d20 GPU #1 recognized as Radeon 270/270X
01:40:59:318 d20 GPU #2 recognized as Radeon 270/270X
01:40:59:318 d20 POOL/SOLO version
01:40:59:318 d20 b167
01:40:59:350 d20 start building OpenCL program...
I don't know what happened, I was mining with RX480 for 1 day, but then I try some intensity changes and after all I cannot mine with RX480 anymore...
Claymore, please help. I reinstall Windows and no change, still can't mine. ;( same problem here with 2x 7970 and one rx480, something to do with opencl, anyone having the same issue ?? |
|
|
|
|
ushba
Newbie
Offline
Activity: 31
Merit: 0
|
|
July 11, 2016, 03:10:51 AM |
|
How profitable is mining Siacoin, comparing to Decred? Any information....
|
|
|
|
|
|
Meech
|
|
July 11, 2016, 03:23:48 AM |
|
Anyway to add worker name to Claymore? Seems to work with GOminer
"address=YOUR_WALLET_ADDRESS&worker=YOUR_WORKER_NAME&email=YOUR_EMAIL" -edit- copypaste from nanopool help Thanks works only in config.txt however, not in the bat file After much testing if you have any Tahiti based cards like 7950/7970/280x , you should just mine SIA directly. You will make almost double over ETH.
Pitcairn or Hawaii based cards like 270x,370,290 and the results aren't as good.
However it uses about 25% more power to mine SIA than ETH.
what speeds are you getting with those Tahitis? Can you mine only SIA with claymore´s? 7970/280x get 900MH/s I think anyone claiming to make more on sia alone rather than mining ether has their calculations wrong. Also the only interest in sia is the fact you can dual mine it.
Probably more profitable for 1 more day until the difficulty adjusts 50% For windows .bat file you need quotes before the pool and after your worker. In linux you don't, for config.txt or terminal. (This is for sia pool only). |
|
|
|
|
wpsd
Newbie
Offline
Activity: 41
Merit: 0
|
|
July 11, 2016, 03:55:40 AM |
|
@claymore Why does Linux get lower speed then Windows ( by 2MH/s from 6 GPU Rig ) Claymore Configuration -esm 0 -erate 1 -etha 0 // this increase by 2MH/s but still lower by 2MH/s compare to Windows -ethi 8 -mode 1 Computer Spec ( exactly same machine ) 6x AMD GPU R9 380 Intel Dual Core 3.2GHz 500GB HDD 4GB Memory Asrock H81 Pro BTC No overclock Ubuntu 14.04.5, Fglrx 15.302 ( equal to 15.12 ) 16GB Swap Windows 10, Radeon Driver Packaging Version 15.30.1025.1001-151204a-298676C 10GB Virtual Memory It's mean I lost 1 rig every 60 rig I have  |
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
July 11, 2016, 04:35:08 AM |
|
@Claymore: what does this mean in logs (I set -r 1 to reboot in case of issues): 23:13:49:189 71a94780 watchdog - dminer threads hangs
23:13:49:189 71a94780 em hbt: 1, dm hbt: 120073, fm hbt: 80,
23:13:49:189 71a94780 Miner thread hangs, need to restart miner!
23:13:49:189 71a94780 Rebooting
This issue occured on both my Linux rigs at the same moment. It was repeated (rebooted) 3 times before continued mining. I also found that at the same time nanopool had hashrate drop, so it looks like some issue with the pool. What concerns me, that an issue with the secondary coin pool resulted in reboot (restart) when it should be sufficient to restart some threads (they are not GPU/OpenCL related). Maybe makes sense to restart just miner if it is not a hardware/OpenCL issue, and reboot only when there are problems with GPU? PM me the complete log. Restarting thread is not a good idea because it may fail if thread that hangs locked some resource, for example, critical section. Or if it starts to work in some time. @claymore
Why does Linux get lower speed then Windows ( by 2MH/s from 6 GPU Rig )
https://bitcointalk.org/index.php?topic=1433925.msg15155124;topicseen#msg15155124 |
|
|
|
zatara15
Newbie
Offline
Activity: 6
Merit: 0
|
|
July 11, 2016, 04:40:27 AM |
|
@Claymore
Hey, played around with it. -gser 2 did not make a difference, but if I removed SIA minning and it works. Is there anyway to make both work?
On eth it is running no problems.
Thanks
-Art
|
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
July 11, 2016, 04:46:55 AM |
|
@Claymore
Hey, played around with it. -gser 2 did not make a difference, but if I removed SIA minning and it works. Is there anyway to make both work?
On eth it is running no problems.
Thanks
-Art
I already told you all my thoughts. |
|
|
|
zatara15
Newbie
Offline
Activity: 6
Merit: 0
|
|
July 11, 2016, 04:55:26 AM
Last edit: July 11, 2016, 05:21:55 AM by zatara15 |
|
@Claymore
Hey, played around with it. -gser 2 did not make a difference, but if I removed SIA minning and it works. Is there anyway to make both work?
On eth it is running no problems.
Thanks
-Art
I already told you all my thoughts. @Claymore EDIT: Got it to work with lower SIA mining intensity. My guess is the cards wanted more power than the 2 x 8-pin connectors can provide mining both. Thanks for the help, keep up that hard work. |
|
|
|
|
greengo
Newbie
Offline
Activity: 11
Merit: 0
|
|
July 11, 2016, 05:04:37 AM |
|
Who can help me
EthDcrMiner64.exe CRASHED!!!
Win 7/64 Crymson 16.7.2 RX 480
eth-proxy mode
Config:
# WARNING! Remove "#" characters to enable lines, with "#" they are disabled and will be ignored by miner! Check README for details.
# WARNING! Miner loads options from this file only if there are not any options in the command line!
-
14:26:05:048 1250 Unsupported Overdrive version 7
AND CRASH!
PLS HELP!!!!!!!!!!
I'm just guessing but your last line in log could be that your using unsupported drivers. Which driver to use with RX480 !!!??? Anybody use this card?? On Linux only AMDGPU-PRO ver. 16.30 ubuntu 16.04 Windows 7-10 driver version 16.20.1035.1001-160705a-304296E known as Crimson-16.7.1 In Windows7 with mem clock 2250MHz core clock def.(1290) I have 28MH/s per RX 480 Im install 16.7.1 and again miner crashed!! BUT run default start.bat All works!!!!!!! When im connect my eth-proxy 0.0.5 MINER CRASHED!!!! But if connect with ethminer to eth-proxy All works! SOMEBODY HELP!!!!! NOW how a can correctly connect to my eth-proxy? with command-line?  ?? |
|
|
|
|
dontetris
Newbie
Offline
Activity: 47
Merit: 0
|
|
July 11, 2016, 05:32:03 AM |
|
I tried SIA, seems profitable but not worth the huge extra stress on the cards, poor guys are running 10+more higher temps with it...  |
|
|
|
|
adaseb
Legendary
Offline
Activity: 3752
Merit: 1710
|
|
July 11, 2016, 07:37:13 AM |
|
How come nobody actually reads???
Don't dual mine SIA if you are running out of power or your miners are overheating, mine it directly without ETH and you will make slightly more until the next difficulty retarget.
7970/280x mines at 900MHS/s $3 per day per GPU ! You won't make that much with ETH currently.
|
|
|
|
|
merc84
|
|
July 11, 2016, 09:33:22 AM |
|
How come nobody actually reads???
Don't dual mine SIA if you are running out of power or your miners are overheating, mine it directly without ETH and you will make slightly more until the next difficulty retarget.
7970/280x mines at 900MHS/s $3 per day per GPU ! You won't make that much with ETH currently.
How do i mine sia only with claymore miner? |
|
|
|
|
adaseb
Legendary
Offline
Activity: 3752
Merit: 1710
|
|
July 11, 2016, 09:38:01 AM |
|
How come nobody actually reads???
Don't dual mine SIA if you are running out of power or your miners are overheating, mine it directly without ETH and you will make slightly more until the next difficulty retarget.
7970/280x mines at 900MHS/s $3 per day per GPU ! You won't make that much with ETH currently.
How do i mine sia only with claymore miner? You can either set the -dcri 500 or use the official SIA miner instead. |
|
|
|
dontetris
Newbie
Offline
Activity: 47
Merit: 0
|
|
July 11, 2016, 09:40:28 AM |
|
How come nobody actually reads???
Don't dual mine SIA if you are running out of power or your miners are overheating, mine it directly without ETH and you will make slightly more until the next difficulty retarget.
7970/280x mines at 900MHS/s $3 per day per GPU ! You won't make that much with ETH currently.
I never even tried dual mining, only direct SIA and it still does 10c+ more on the cards compared to ETH only, really profitable on the mentioned cards tho. |
|
|
|
|
|
merc84
|
|
July 11, 2016, 09:42:50 AM |
|
Sorry i was trolling  |
|
|
|
|
|
Dowper
|
|
July 11, 2016, 09:45:35 AM |
|
Someone please help! When I try to mine with RX480, the miner crashes. A have 3 card - 2x270X and 1xRX480. If i try to mine with only 270X, there is no problem, but if I try to mine with all 3 or just with the polaris - the miner crashes. I post last rows from log file:
01:40:59:271 d20 Total cards: 3
01:40:59:287 d20 Initializing...
01:40:59:303 d20 GPU #0 recognized as Radeon RX 480
01:40:59:303 d20 GPU #1 recognized as Radeon 270/270X
01:40:59:318 d20 GPU #2 recognized as Radeon 270/270X
01:40:59:318 d20 POOL/SOLO version
01:40:59:318 d20 b167
01:40:59:350 d20 start building OpenCL program...
I don't know what happened, I was mining with RX480 for 1 day, but then I try some intensity changes and after all I cannot mine with RX480 anymore...
Claymore, please help. I reinstall Windows and no change, still can't mine. ;( If it fails on "start building OpenCL program" - something is wrong with OpenCL, i.e. with drivers. I tried with 16.6.2, 16.7.1 and 16.7.2 - still miner crashes! I don't know what to do... |
|
|
|
|
|
