Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[vapourminer]

I can assure you that at least one guy (me) reads all documents and checks what's new after new releases. Even if not use all, it is good to know what is possible to do with it.

yup.

I print em out and leave it on the bench near the mining rig. learned that habit back in the gpu cgminer days. it was an absolute must.

[adaseb]

Well the SIA difficulty just jumped 51%!

[sp_]

Because SIA is now opensource in ASIA, and the Chinese miners are harvesting the profits of the opensource...

[ps_jb]

Because SIA is now opensource in ASIA, and the Chinese miners are harvesting the profits of the opensource...

Exchange market for SC is quite depressive

[crazyearner]

Because SIA is now opensource in ASIA, and the Chinese miners are harvesting the profits of the opensource...

Exchange market for SC is quite depressive

For now at least with the amount of miners raking in and dumping no doubt will find a bottom and eventually go up. If the coin survives and people buy into it and it gets adopted and used no doubt am sure it can make a recovery. Not sure how Decred has been or was when it first hit dual mining no doubt hit a dump wall down trend and went back up...

Market Cap $ 10,032,285 =15,480 BTC

Volume (24h)$ 546,036 = 842.55 BTC

Available Supply 16,200,989,994 SC

Compare that with Decred thats one hell of some movements over last 24 hours. Time will only tell to see where it lands and bottoms and if it will survive.

[sp_]

Decred survided the Claymore miner, and so will the SIA.

[crazyearner]

I have a question for claymore you say theirs is no loss in dual mining when mining with Sia and ETH Sia mining speeds are super low mining with gominer I get around 800 to 800MH per card yet using Claymore your mine I get 200MH ish per card that is a massive difference. Will this likely be to be improved with your software?

[fittsy]

Well the SIA difficulty just jumped 51%!

I just stopped solo mining SIA. Now back to dual mining.

[adaseb]

Anyway to only dual mine 4 out of 5 GPUs?

One GPU overheats while dual mining, I have been using the "-dcri 1,30,30,30,30" command. Anyway to turn it off completely?

[Vegetablepin]

-mode   Select mining mode:
   "-mode 0" (default) means dual Ethereum + Decred/Siacoin mining mode.
   "-mode 1" means Ethereum-only mining mode. You can set this mode for every card individually, for example, "-mode 1-02" will set mode "1" for first and third GPUs (#0 and #2).

[IncludeBeer]

Hey Claymore,

I'm trying to get my rigs under a sleep schedule as my electricity provider is charging extra $$ during peak hours of the day (for summer months).  So, I've got a couple scripts that run using the Task Scheduler on Windows.  I need to be able to close the miner before it sleeps the rig, so that when the task to wake the rig up and start the miner executes later, I won't have >1 instance of the miner running.  I've tried the following:

Code:

C:\Users\Miner>taskkill /IM EthDcrMiner64.exe
ERROR: The process "EthDcrMiner64.exe" with PID 7216 could not be terminated.
Reason: This process can only be terminated forcefully (with /F option).

...which made me do this:

Code:

C:\Users\Miner>taskkill /IM EthDcrMiner64.exe /F
ERROR: The process "EthDcrMiner64.exe" with PID 7216 could not be terminated.
Reason: Access is denied.

Can you tell me a good way to gracefully exit your miner via cmd?

[ps_jb]

I just stopped solo mining SIA. Now back to dual mining.

Good - now difficulty will drop off 51%!

[fittsy]

I just stopped solo mining SIA. Now back to dual mining.

Good - now difficulty will drop off 51%!

LOL. I'm a newb. Only a small number of gpus.

[adaseb]

-mode   Select mining mode:
   "-mode 0" (default) means dual Ethereum + Decred/Siacoin mining mode.
   "-mode 1" means Ethereum-only mining mode. You can set this mode for every card individually, for example, "-mode 1-02" will set mode "1" for first and third GPUs (#0 and #2).

Nice thanks. I must of missed that in the readme file.

[BitJunkie223]

So this is my dual Eth/Sia config.

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0x70c06E09AE5A2b8ECa5863C68b725adadCefF5cb.worker1 -epsw x -dpool http://sia-us-east1.nanopool.org:9980/miner/header?address=a124a4d27961737e104e67551298844133ddbc0444b1cd585aa8243dfed1c4f8355ba6fc166e -dcoin sia

I'm getting about 20MH/s Eth and 300MH/s Sia with a light overclock on an R9 285, and same rates on an R9 380. So exactly the same as my Decred hashrates on both.

One problem, though... Every few seconds when dual mining eth/sia, my system locks up, and it seems worse when anything visual happens. I'll turn off aero to see if it helps at all, so we'll see... Anyone else have that issue?

EDIT: Disabling aero seemed to do the trick, though I haven't tried streaming video or anything, which I was able to do quite well while mining Eth/Decred... Anyway, Thanks claymore for another awesome addition to your already incredible dual miner.

[frostminer]

So this is my dual Eth/Sia config.

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0x70c06E09AE5A2b8ECa5863C68b725adadCefF5cb.worker1 -epsw x -dpool http://sia-us-east1.nanopool.org:9980/miner/header?address=a124a4d27961737e104e67551298844133ddbc0444b1cd585aa8243dfed1c4f8355ba6fc166e -dcoin sia

I'm getting about 20MH/s Eth and 300MH/s Sia with a light overclock on an R9 285, and same rates on an R9 380. So exactly the same as my Decred hashrates on both.

One problem, though... Every few seconds when dual mining eth/sia, my system locks up, and it seems worse when anything visual happens. I'll turn off aero to see if it helps at all, so we'll see... Anyone else have that issue?

EDIT: Disabling aero seemed to do the trick, though I haven't tried streaming video or anything, which I was able to do quite well while mining Eth/Decred... Anyway, Thanks claymore for another awesome addition to your already incredible dual miner.

OC'd R9 380 ITXs do around 23mh +dcr/sia

Funny thing.. R9 380X(more expensive too) seems to take ETH badly... 20mh and less if u play with the oc.

[agente]

Don't mine and sell sia pls...  you are collapsing siacoin price

[tolazy]

anyone with a Saphire 390x or anyother 390x with modded bios ? cant seem to find any. only for 290x's

[citronick]

anyone with a Saphire 390x or anyother 390x with modded bios ? cant seem to find any. only for 290x's

goto Heliox page at https://bitcointalk.org/index.php?topic=1424132.0

he has Nanos and 390s modded ROMs

[Foss]

I have 2 GPU HD7970 on Windows 7 64 bit, all works fine until I use teamviewer for remote connection, the AMD driver (Crimson 15.12) stop to work and from GPU-Z and MSI Afterburner I can not see any GPU infos. I have try to reinstall the AMD driver but the problem is still present.
The monitor is not connected to the Computer.

Try LiteManager http://www.litemanager.com/ it's much better than teamviewer.