Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[mirny]

No v14.5 for linux, or Am I blind?

[1714242849]

1714242849

[1714242849]

1714242849

[Claymore]

Claymore, would you be able to write some near download links that 14.5 is for windows only and for linux there is v12 ?
I get like like 10-15 requestes per day "when i will upload claymore-eth v14.5" and the answer is "there is no v14.5 for linux"
...
What do You think ?

Done

[mirny]

Claymore, would you be able to write some near download links that 14.5 is for windows only and for linux there is v12 ?
I get like like 10-15 requestes per day "when i will upload claymore-eth v14.5" and the answer is "there is no v14.5 for linux"
...
What do You think ?

Done

Both links are same, so what should solve this?

[P00P135]

Claymore, would you be able to write some near download links that 14.5 is for windows only and for linux there is v12 ?
I get like like 10-15 requestes per day "when i will upload claymore-eth v14.5" and the answer is "there is no v14.5 for linux"
...
What do You think ?

Done

Both links are same, so what should solve this?

Are you serious?

[niros]

Got quite a few ASRock H110 Pro BTC+, also not working. Doesn't matter what card.
Locks up Windows immediately as it tries to load straps. RX470/RX580
Working fine without any -strap or -rxboost, which is ok but not as good as it could be...
Claymore could you look into this for us? Thank you sir.

Claymore's Dual Ethereum + Decred/Siacoin/Lbry/Pascal/Blake2s/Keccak AMD+NVIDIA GPU Miner.
=========================

Hi Guys,
Why are my 8cards setups crashing? The rig freezes immediatly after applying the first straps. When i remove the rxboost 1 it works fine. I dont have issues with my 5 and 6 cards setup.
The cards are 8x rx580 8gb. with Asrock h110.
Using Adrenalin 19.5.1 and Claymore 14.5

Please HELP!

[Er0l]

Here are some results from another farm we manage and operate running on Windows.

Specs:

OS: Windows
Claymore Version: 14.5

Farm (MH/s) BEFORE Update: 11,942.107 MH/s
Farm (MH/s) AFTER Update: 12,034.358 MH/s

Change MH/s: +92.251 Mh/s (Overall Farm)
Change %: +0.772% (Overall Farm)

Upon updating to v14.5 we noticed that running the miner alone WITHOUT the -rxboost command gave us the best results on this particular farm running Windows. Running either configuration of the following commands, -rxboost 1; -rxboost 30; -rxboost 50; -rxboost 75; -rxboost 100 - actually gave us 1-2 Mh/s decrease hashrate (Overall in Rig; ie: 356Mh/s (NO rxboost) --> 354 Mh/s Using -rxboost + (various parameters mentioned))

We would like to know the what other miners have experienced using this rxboost feature, and if they had similar results on WINDOWS.

Disclosure: ALL GPU's on this farm are RX570/580 (4GB+8GB), and have been individually tuned by RigSpec with custom vBios straps and memory+core timings have been fine tuned, so they were already maxed out prior to the v14.5 update for the most part; hence why the increases are not as great as results posted previously on the SMOS farm we manage.

Detailed Chart - Individual Rig's:

https://ibb.co/sWXkSDs


https://www.RigSpec.io

Claymore already revealed what rxboost does, gave entire specification of "Memory refresh period". In order for "-rxboost" to work as what is meant for you need to keep core a bit higher than usual and clock latency tighter.

We have our cores maxed out on all rigs at 1100-1150 (any further crashes rigs) ... the rigs in this particular farm have been fine tuned to the max possible settings via multiple trial test. Still no changes with rxboost, but v14.5 is definitely more efficient than prior versions, and as you can see has brought higher hashrates overall by simply updating

rxboost + 30mhz more Core on Rx470 gives huge Bump in hashrate, it was near nothing when i was running 1150mhz + custom Straps, but these 30mhz Core was the Key to the big Change

[ekiller]

  Hello ,

Today 1st time i try  Claymore 14.5 on my rig because of new  (-strap feature)    
I got error  "CUDA error - cannot allocate big buffer for DAG. Check readme.txt"

Hardware :     12x   Nvidia gtx 1070 / 8GB  DDR4 RAM

Software :  W10 Enterprise  /  Nvidia driver (Latest with CUDA 10)

Visual memory settings :  16G / 24G / 48G / 80G (i try all)  still error.

[AzzAz]

 Hello ,

Today 1st time i try  Claymore 14.5 on my rig because of new  (-strap feature)    
I got error  "CUDA error - cannot allocate big buffer for DAG. Check readme.txt"

Hardware :     12x   Nvidia gtx 1070 / 8GB  DDR4 RAM

Software :  W10 Enterprise  /  Nvidia driver (Latest with CUDA 10)

Visual memory settings :  16G / 24G / 48G / 80G (i try all)  still error.

I had 1 nvidia rig ( 6 cards) that just did not work if less than 16GB RAM.  And is your processor ok with 12 Nvidias?

[dragonmike]

  Hello ,

Today 1st time i try  Claymore 14.5 on my rig because of new  (-strap feature)   
I got error  "CUDA error - cannot allocate big buffer for DAG. Check readme.txt"

Hardware :     12x   Nvidia gtx 1070 / 8GB  DDR4 RAM

Software :  W10 Enterprise  /  Nvidia driver (Latest with CUDA 10)

Visual memory settings :  16G / 24G / 48G / 80G (i try all)  still error.

Even 80G is not enough if you have 12 GPUs with 8GB ram on. You need to allocate 12 x 8G = 96G virtual mem to be absolutely safe. If you have that much space left to spare, give it a go and try again.

[dragonmike]

@Claymore: Any chance optimised timings could be made available for RTX cards? Eliovp seemed to say turing card regs are read-only... but there might be a way around? Have you looked at it at all?

[ascaloon]

hey guys,

anybody know what is the issue with this? Im already try to disable secure boot in bios but not helped. If Im try to run claymore as admin it hangs. Any suggestion or solution for this? My hashrate still the same as before version, version 12 for example...

Here is the preview:

https://ibb.co/4T8TBfp

[dwu]

With claymore you mean you run EthDcrMiner64.exe with admin rights or just a .bat? Try activating it in the file properties.

[keksik]

i have MSI gtx1080 SeaHawk
-strap 3 only at stock settings, it crash even at +50mem
-strap 2 70pl, -200core, +500mem and hashing 36Mh/s

i cant overclock my mem further but cant use higher straps, so seems thats maximum for my card...

[yaya79]

win7 x64,
nvidia 430.64
1 rig - 4x1080ti, mem +500, OhGodAnETHlargementPill, strap 4, 59.4 Mh/s per card;
2 rig - 4x1070ti, mem +600, strap 1, 34.3 Mh/s per card.

[laik2]

win7 x64,
nvidia 430.64
1 rig - 4x1080ti, mem +500, OhGodAnETHlargementPill, strap 4, 59.4 Mh/s per card;
2 rig - 4x1070ti, mem +600, strap 1, 34.3 Mh/s per card.

You don't actually need the pill when you're applying -strap onto GPU.

[ekiller]

 Hello ,

Today 1st time i try  Claymore 14.5 on my rig because of new  (-strap feature)    
I got error  "CUDA error - cannot allocate big buffer for DAG. Check readme.txt"

Hardware :     12x   Nvidia gtx 1070 / 8GB  DDR4 RAM

Software :  W10 Enterprise  /  Nvidia driver (Latest with CUDA 10)

Visual memory settings :  16G / 24G / 48G / 80G (i try all)  still error.

I had 1 nvidia rig ( 6 cards) that just did not work if less than 16GB RAM.  And is your processor ok with 12 Nvidias?

Same rig work with linux and no any problem.

[Crypto-Age]

I have rx580 4gb . but when i try to command -strap 1,2,3 ,my rig crashes and restart.
How can I set up ?

[dannyprats]

Hello folks..

Does this miner work for ProgPow?

when Claymore ProgPow miner?

[P00P135]

Hello folks..

Does this miner work for ProgPow?

when Claymore ProgPow miner?

Use your eyeballs idiot

[ayiphelmy]

my rx480 is sudenly hang when start even with only -rxboost 1 without -strap 1 any clue?