SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[kristikun]

im getting really sweet hashrates thx for hard work , wanted to ask about todays monero V9 Fork is  miner suporting it ?

[1631892315]

1631892315

[1631892315]

1631892315

[1631892315]

1631892315

[seefatlow]

Just to share my v8 Vega hashrates

Rx Vega 64(Samsung)  1941 H/s T: 61C CC 1448 MhZ MC 1050MHz
Rx Vega 56(Samsung)  1892 H/s T: 59C CC 1448 MHz MC 910 MHz
RX Vega 56 (Hynix) 1811 H/s T:62C CC 1448 MHz MC 910 MHz

Intensity 120/12/2

9 Vega Rig - 1950 W out of the wall power draw

[CharlieCox]

9 Vega Rig - 1950 W out of the wall power draw

Did you undervolt?

[seefatlow]

9 Vega Rig - 1950 W out of the wall power draw

Did you undervolt?

Most definitely

[ntshb]

1107w for 4 vega 64 is quite high isn't it?

[nightfury626]

can anyone help me, after switching from monero7 to monero8, my hashrates went from 2156 to 1275. what extra stuff is needed with this fork to get my hashrates back please?

[Bojcha]

Vega owners, check your hotspot temps. My Vega didnt survive the night mining v8 even when I dropped the core to 1250@865mV
And a big fat F U to Monero devs

Completely your fault. Many times was repeated - do not look GPU temp. Every Vega need to be set at 50c gpu temp (which is minimum by driver) and then HotSpot and HBM2 temps will be ok.

[goran89]

Strange thing with v8 is that my 570's hashrate is same (950 H/s) but my 580's droped from 1025 to 975 H/s. I use same settings just changed worksize from 8 to 16 and my power consumption went up for about 80-85 W for 5 cards.

On friends rig I also have problem with "Initialising open CL driver/cards...." It just stuck on that after I start miner. We have same windows version (1709), same driver (18.6.1) and same miner but on his rig it won't start.
Any solution (don't want to reinstall whole windows again  ) ?

[Bojcha]

Just to share my v8 Vega hashrates
9 Vega Rig - 1950 W out of the wall power draw

Too much power draw. That is about 210W per card (?) it should be around 180w for 1950-1980H/s

[dragonmike]

Just to share my v8 Vega hashrates
9 Vega Rig - 1950 W out of the wall power draw

Too much power draw. That is about 210W per card (?) it should be around 180w for 1950-1980H/s

I doubt you can actually reach that at the wall with v8. Unless you have ice cold airflow and your GPU fans are hardly spinning... or you have won the silicon lottery.

[gorantec]

why when i install Amd driver 18.6.1 my sapphire rx570 nitro + is detect like rx 580 ? Did someone have same problem ?

[nordmann666]

Strange thing with v8 is that my 570's hashrate is same (950 H/s) but my 580's droped from 1025 to 975 H/s. I use same settings just changed worksize from 8 to 16 and my power consumption went up for about 80-85 W for 5 cards.

On friends rig I also have problem with "Initialising open CL driver/cards...." It just stuck on that after I start miner. We have same windows version (1709), same driver (18.6.1) and same miner but on his rig it won't start.
Any solution (don't want to reinstall whole windows again  ) ?

which cards exactly with RAM and whats your sxettings to get 950 with 570´s

[O-Coin]

Vega owners, check your hotspot temps. My Vega didnt survive the night mining v8 even when I dropped the core to 1250@865mV
And a big fat F U to Monero devs

Over the night SRBMiner reset every cca 2 hours, ONE Vega 56 (gpu 0) drop hash to 0 and reset.

And that is after I changed power and intensity.

Try more mV on core and memory to see the result.

Now testing OverdriveNtool:

Problematic card Vega 56 reference:
[Profile_0]
Name=Sapphire
GPU_P0=852;900
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;905;0
GPU_P7=1407;950
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=800;900;0
Mem_P3=1050;950
Fan_Min=3350
Fan_Max=4900
Fan_Target=75
Fan_Acoustic=2400
Power_Temp=85
Power_Target=0

Other Vega 56 reference:
[Profile_3]
Name=Gigabyte
GPU_P0=852;900
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;905;0
GPU_P7=1407;950
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=800;900;0
Mem_P3=1095;950
Fan_Min=3350
Fan_Max=4900
Fan_Target=75
Fan_Acoustic=2400
Power_Temp=85
Power_Target=0

I cant get my P3 near that high any higher and I get compute errors.  I have Hynix Mem in all my Vega56s and average about 1840-1860.  No shut down or restarts.

[Profile_5]
Name=FAST
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;905;0
GPU_P7=1407;925
Mem_P0=167;800;0
Mem_P1=500;800;0
Mem_P2=700;900;0
Mem_P3=955;930
Fan_Min=2800
Fan_Max=4900
Fan_Target=50
Fan_Acoustic=2400
Power_Temp=80
Power_Target=0

 Did you flash to 64 bios?

[goran89]

Strange thing with v8 is that my 570's hashrate is same (950 H/s) but my 580's droped from 1025 to 975 H/s. I use same settings just changed worksize from 8 to 16 and my power consumption went up for about 80-85 W for 5 cards.

On friends rig I also have problem with "Initialising open CL driver/cards...." It just stuck on that after I start miner. We have same windows version (1709), same driver (18.6.1) and same miner but on his rig it won't start.
Any solution (don't want to reinstall whole windows again  ) ?

which cards exactly with RAM and whats your sxettings to get 950 with 570´s

XFX RX 570 RS 4GB XXX Edition with elpida memory
1220/900 core and 2035/910 memory
miner settings I:58,W:16,T:2

[tvukoman]

Did you flash to 64 bios?

yes, of course.

[ntshb]

ok this is what I got and it's strange. for 1 of them I had very little hash drop
the rest had significant drops

miner 1
5x vega56 flashed to 64(reference)
before v8 it was 9855+h/s
v8 8955h/s   1260w at the wall

miner 2
4x vega 64 (reference)
before v8 it was 7900h/s
v8 7755h/s 
1250mhz/1100mhz 935w

miner 3
6x vega 56 (non ref, 1 PC vega 56 and 5 gigabyte vega 56)
before v8 10300-11000h/s
v8 10300+h/s 1400w


 
So for every vega, I need 2 IDs? 


 { "id" : 0, "intensity" : 124, "worksize" : 16, "threads" : 2}
 { "id" : 1, "intensity" : 124, "worksize" : 16, "threads" : 2}
 { "id" : 2, "intensity" : 124, "worksize" : 16, "threads" : 2}
 { "id" : 3, "intensity" : 124, "worksize" : 16, "threads" : 2}
 { "id" : 4, "intensity" : 124, "worksize" : 16, "threads" : 2}
 { "id" : 5, "intensity" : 124, "worksize" : 16, "threads" : 2}
 { "id" : 6, "intensity" : 124, "worksize" : 16, "threads" : 2}
 { "id" : 7, "intensity" : 124, "worksize" : 16, "threads" : 2}

[Bare]

Hi everybody,
can anyone please help me with an issue I'm dealing with?
In forward, I apologise if this problem has been asked and resolved before already.

I'm having a problem running SRBminer across my win 10 rigs, I'm getting this error in windows

application has been blocked from accessing graphics hardware


Bear in mind my win 10 rigs are perfectly operational on other miners such as claymore's
but windows is blocking SRBminer's access to graphics hardware for some reason and I don't know how to bypass this shit.

the result of error I get in the miner is in this image




How did you guys bypass this windows issue? It seems like it's a fairly simple registry fix or something

Thank you!

[Bakhtra]

Hi everybody,
can anyone please help me with an issue I'm dealing with?
In forward, I apologise if this problem has been asked and resolved before already.

I'm having a problem running SRBminer across my win 10 rigs, I'm getting this error in windows

application has been blocked from accessing graphics hardware


Bear in mind my win 10 rigs are perfectly operational on other miners such as claymore's
but windows is blocking SRBminer's access to graphics hardware for some reason and I don't know how to bypass this shit.

the result of error I get in the miner is in this image




How did you guys bypass this windows issue? It seems like it's a fairly simple registry fix or something

Thank you!

I think you need to add more pagefile

[Bare]

Hi everybody,
can anyone please help me with an issue I'm dealing with?
In forward, I apologise if this problem has been asked and resolved before already.

I'm having a problem running SRBminer across my win 10 rigs, I'm getting this error in windows

application has been blocked from accessing graphics hardware


Bear in mind my win 10 rigs are perfectly operational on other miners such as claymore's
but windows is blocking SRBminer's access to graphics hardware for some reason and I don't know how to bypass this shit.

the result of error I get in the miner is in this image




How did you guys bypass this windows issue? It seems like it's a fairly simple registry fix or something

Thank you!

I think you need to add more pagefile

I've already set it to 16 GB across all my rigs, isn't that enough for SRBminer or do you suggest more?

[dingdongtobias]

why nobody read first page or readme.txt ??

i find that have compute errors if just use the normalv7 settings with normalv8, you need change overclock settings, give more POWER to gpus