SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[Abies]

Jason's pool does not work.

Use the Graft Dev's testnet pool below.

http://3.83.140.241/

[MingMining]

ok so I tried again with default setting and no overclock. Still no go. Same errors.

I used 1.7.0 before. So I just copied pool.txt and start.bat to new 1.7.9 folder. Is there anything else I need to do? Seemed I missed something.

Come on. They have been working for years now with new algo we have to clock down?

Did anyone have similar issue?

reduce memory clock or add power to memory

yes.

before i fck my wife 2-3 time  on day but now i dont

mybe your GPU dirty. - new card have  beter hr. old card have lower and have high temperature.
new CAR  work fine but  old CAR dont work fine and you must old CAR drive litle slowly or  machine die.

comput eror = so high memory clock and to low power.

reduce clock and try.

example my card have many compute error- 30 in hour on 1100mhz 900mv but on 1098mhz 900mv dont have any compute error in 1 day

[BorgMcz]

Hello,

I can ask for help. Now I'm using XMR CAST, but unfortunately not updated. How can I set SRBMiner to automatically switch to Monero for pool mineXMR? THX

[doktor83]

Hello,

I can ask for help. Now I'm using XMR CAST, but unfortunately not updated. How can I set SRBMiner to automatically switch to Monero for pool mineXMR? THX

Check this out :

https://bitcointalk.org/index.php?topic=3167363.msg49888951#msg49888951

[Kaezar]

For "Radeon VII" owners: Someone find optimal config/wattman settings for V8?
I think target is hash rate - 3K and about 200w consumption.
Any ideas?

[doktor83]

V1.8.0
- Added new algo 'Graft' (graft, cryptonight_graft, cryptonight_reversewaltz, cryptonight_v8_reversewaltz)
- Added cmd parameters giveuplimit, retrytime, mainpoolreconnect, minrigspeed, shutdowntemperature, rebootscriptgpuwatchdog, rebootscriptminrigspeed
- No more mixing of cmd line setup and config files, now it's one or the other (of course you can still define failover pools if using cmd setup)
- It is enough to set ccryptonighttype, cpool, cwallet in cmd, gpu's will be auto setup
- Fixed a few bugs

+ Graft will fork these days, so their new algo called CN Reverse Waltz added. You can set cryptonight_type to any of these : graft, cryptonight_graft, cryptonight_reversewaltz, cryptonight_v8_reversewaltz

To use the auto switch on fork option do this :

start.bat
SRBMiner-CN.exe --enablecoinforking --config Config\config-normalv8.txt --pools pools.txt

Explained :
1. Start mining with normalv8 algo, because Graft still uses that algo
2. Add --enablecoinforking parameter so miner knows you want to use the built-in (predefined) fork informations
3. When pool sends a job for the new algo, miner will auto switch to the new algo,if you have it defined in algos.txt (and you do by default in algos.txt)

+ Added a few more parameters to cmd, that were already available through config files.
Now every important parameter can be used also in cmd line. What's new is that now you can use one or the other method for defining things, so you use cmd line setup or config file. No more mixing as before.
Algo switching still needs the config method to be used.

The minimum config needed to start mining is :

SRBMiner-CN.exe --ccryptonighttype normalv4 --cpool pool:port --cwallet wallet

This will auto setup every AMD Gpu you have, and start mining with normalv4 algo on pool:port you set.


+ Still trying to fix those nasty random crash bugs.. Also fixed a few more

[sky2018miner]

tried a new graft algorithm
I post a log
[2019-03-06 16:49:33] Startup monitor attached
[2019-03-06 16:49:33] Miner version: 1.8.0
[2019-03-06 16:49:33] Windows version: 10.0 build 16299
[2019-03-06 16:49:33] Video driver version: 22.19.659.0
[2019-03-06 16:49:36] AMD Platform ID: 0
[2019-03-06 16:49:36] AMD platform FOUND
[2019-03-06 16:49:36] Found 6 AMD devices
[2019-03-06 16:49:36] CPU AES-NI: FALSE
[2019-03-06 16:49:36] GPU0: AMD Radeon R7 200 Series [pitcairn] [2048 MB][I: 15.0][W: 16][T: 2][F: 8][BUS: 8]
[2019-03-06 16:49:36] GPU1: Radeon(TM) RX 460 Graphics [baffin] [2048 MB][I: 15.0][W: 16][T: 2][F: 8][BUS: 4]
[2019-03-06 16:49:36] GPU2: AMD Radeon R7 200 Series [bonaire] [2048 MB][I: 11.0][W: 8][T: 2][F: 8][BUS: 10]
[2019-03-06 16:49:36] GPU3: AMD Radeon (TM) R7 370 Series [pitcairn] [2048 MB][I: 15.0][W: 16][T: 2][F: 8][BUS: 9]
[2019-03-06 16:49:36] GPU4: AMD Radeon (TM) R7 370 Series [pitcairn] [2048 MB][I: 15.0][W: 16][T: 2][F: 8][BUS: 11]
[2019-03-06 16:49:36] GPU5: Radeon(TM) RX 460 Graphics [baffin] [2048 MB][I: 12.0][W: 8][T: 2][F: 8][BUS: 1]
[2019-03-06 16:49:36] ADL is enabled
[2019-03-06 16:49:36] NOT using any of the recommended drivers: Adrenalin 18.5.1, 18.5.2 or 18.6.1
[2019-03-06 16:49:36] Algorithm: Cryptonight Graft
[2019-03-06 16:49:36] Algo switching: disabled
[2019-03-06 16:49:36] Startup monitor: enabled
[2019-03-06 16:49:36] Gpu watchdog: enabled [gpu disable mode]
[2019-03-06 16:49:36] Coin forking: disabled
[2019-03-06 16:49:36] Starting init of mining threads
[2019-03-06 16:49:36] Created OCL context
[2019-03-06 16:49:36] Using fragments 8 for DeviceID 0 (Thread 0)
[2019-03-06 16:49:36] Using heavy_mode 1 for DeviceID 0 (Thread 0)
[2019-03-06 16:49:36] Using thread_delay 319 for DeviceID 0 (Thread 0)
[2019-03-06 16:49:37] Created OCL input buffer for DeviceID 0 (Thread 0)
[2019-03-06 16:49:37] ctx->headers[0] created for DeviceID 0 (Thread 0)
[2019-03-06 16:49:37] ctx->Program created for DeviceID 0 (Thread 0)
[2019-03-06 16:49:37] Compiling [graft] kernel for DEVICE BUS_ID[8]
[2019-03-06 16:49:38] Error CL_INVALID_KERNEL_NAME when creating kernel aи¬ for DeviceID 0 (Thread 0)
[2019-03-06 16:49:38] Error initing GPU's. Stopping miner process
[2019-03-06 16:49:38] Stopping miner process

tried
 on testnet.graft.community

[doktor83]

tried a new graft algorithm
I post a log
[2019-03-06 16:49:33] Startup monitor attached
[2019-03-06 16:49:33] Miner version: 1.8.0
[2019-03-06 16:49:33] Windows version: 10.0 build 16299
[2019-03-06 16:49:33] Video driver version: 22.19.659.0
[2019-03-06 16:49:36] AMD Platform ID: 0
[2019-03-06 16:49:36] AMD platform FOUND
[2019-03-06 16:49:36] Found 6 AMD devices
[2019-03-06 16:49:36] CPU AES-NI: FALSE
[2019-03-06 16:49:36] GPU0: AMD Radeon R7 200 Series [pitcairn] [2048 MB][I: 15.0][W: 16][T: 2][F: 8][BUS: 8]
[2019-03-06 16:49:36] GPU1: Radeon(TM) RX 460 Graphics [baffin] [2048 MB][I: 15.0][W: 16][T: 2][F: 8][BUS: 4]
[2019-03-06 16:49:36] GPU2: AMD Radeon R7 200 Series [bonaire] [2048 MB][I: 11.0][W: 8][T: 2][F: 8][BUS: 10]
[2019-03-06 16:49:36] GPU3: AMD Radeon (TM) R7 370 Series [pitcairn] [2048 MB][I: 15.0][W: 16][T: 2][F: 8][BUS: 9]
[2019-03-06 16:49:36] GPU4: AMD Radeon (TM) R7 370 Series [pitcairn] [2048 MB][I: 15.0][W: 16][T: 2][F: 8][BUS: 11]
[2019-03-06 16:49:36] GPU5: Radeon(TM) RX 460 Graphics [baffin] [2048 MB][I: 12.0][W: 8][T: 2][F: 8][BUS: 1]
[2019-03-06 16:49:36] ADL is enabled
[2019-03-06 16:49:36] NOT using any of the recommended drivers: Adrenalin 18.5.1, 18.5.2 or 18.6.1
[2019-03-06 16:49:36] Algorithm: Cryptonight Graft
[2019-03-06 16:49:36] Algo switching: disabled
[2019-03-06 16:49:36] Startup monitor: enabled
[2019-03-06 16:49:36] Gpu watchdog: enabled [gpu disable mode]
[2019-03-06 16:49:36] Coin forking: disabled
[2019-03-06 16:49:36] Starting init of mining threads
[2019-03-06 16:49:36] Created OCL context
[2019-03-06 16:49:36] Using fragments 8 for DeviceID 0 (Thread 0)
[2019-03-06 16:49:36] Using heavy_mode 1 for DeviceID 0 (Thread 0)
[2019-03-06 16:49:36] Using thread_delay 319 for DeviceID 0 (Thread 0)
[2019-03-06 16:49:37] Created OCL input buffer for DeviceID 0 (Thread 0)
[2019-03-06 16:49:37] ctx->headers[0] created for DeviceID 0 (Thread 0)
[2019-03-06 16:49:37] ctx->Program created for DeviceID 0 (Thread 0)
[2019-03-06 16:49:37] Compiling [graft] kernel for DEVICE BUS_ID[8]
[2019-03-06 16:49:38] Error CL_INVALID_KERNEL_NAME when creating kernel aи¬ for DeviceID 0 (Thread 0)
[2019-03-06 16:49:38] Error initing GPU's. Stopping miner process
[2019-03-06 16:49:38] Stopping miner process

yes, the good old gcn1 cards that i dont have and can't test the implementation.

will try to blind fix it

edit: re-download 1.8.0 and try

[akvilon888]

my rig just freezes and reboots with the new version 1.8.0...cards are rx550.
it works fine with 1.7.9

[sky2018miner]

everything works thank you very much for speed
here is the log
[2019-03-06 18:12:42] Startup monitor attached
[2019-03-06 18:12:42] Miner version: 1.8.0
[2019-03-06 18:12:42] Windows version: 10.0 build 16299
[2019-03-06 18:12:42] Video driver version: 22.19.659.0
[2019-03-06 18:12:45] AMD Platform ID: 0
[2019-03-06 18:12:45] AMD platform FOUND
[2019-03-06 18:12:45] Found 6 AMD devices
[2019-03-06 18:12:45] CPU AES-NI: FALSE
[2019-03-06 18:12:45] GPU0: AMD Radeon R7 200 Series [pitcairn] [2048 MB][I: 24.0][W: 16][T: 2][F: 8][BUS: 8]
[2019-03-06 18:12:45] GPU1: Radeon(TM) RX 460 Graphics [baffin] [2048 MB][I: 29.0][W: 16][T: 2][F: 16][BUS: 4]
[2019-03-06 18:12:45] GPU2: AMD Radeon R7 200 Series [bonaire] [2048 MB][I: 24.0][W: 16][T: 2][F: 8][BUS: 10]
[2019-03-06 18:12:45] GPU3: AMD Radeon (TM) R7 370 Series [pitcairn] [2048 MB][I: 24.0][W: 16][T: 2][F: 8][BUS: 9]
[2019-03-06 18:12:45] GPU4: AMD Radeon (TM) R7 370 Series [pitcairn] [2048 MB][I: 24.0][W: 16][T: 2][F: 8][BUS: 11]
[2019-03-06 18:12:45] GPU5: Radeon(TM) RX 460 Graphics [baffin] [2048 MB][I: 29.0][W: 16][T: 2][F: 16][BUS: 1]
[2019-03-06 18:12:45] ADL is enabled
[2019-03-06 18:12:45] NOT using any of the recommended drivers: Adrenalin 18.5.1, 18.5.2 or 18.6.1
[2019-03-06 18:12:45] Algorithm: Cryptonight Graft
[2019-03-06 18:12:45] Algo switching: disabled
[2019-03-06 18:12:45] Startup monitor: enabled
[2019-03-06 18:12:45] Gpu watchdog: enabled [gpu disable mode]
[2019-03-06 18:12:45] Coin forking: disabled
[2019-03-06 18:12:45] Starting init of mining threads
[2019-03-06 18:12:45] Created OCL context
[2019-03-06 18:12:45] Using fragments 8 for DeviceID 0 (Thread 0)
[2019-03-06 18:12:45] Using heavy_mode 1 for DeviceID 0 (Thread 0)
[2019-03-06 18:12:45] Using thread_delay 319 for DeviceID 0 (Thread 0)
[2019-03-06 18:12:45] Created OCL input buffer for DeviceID 0 (Thread 0)
[2019-03-06 18:12:45] Loading [graft] kernel for DEVICE BUS_ID[8]
[2019-03-06 18:12:45] ctx->Program for DeviceID 0 (Thread 0) loaded
[2019-03-06 18:12:45] Using fragments 8 for DeviceID 0 (Thread 1)
[2019-03-06 18:12:45] Using heavy_mode 1 for DeviceID 0 (Thread 1)
[2019-03-06 18:12:45] Using thread_delay 319 for DeviceID 0 (Thread 1)
[2019-03-06 18:12:45] Created OCL input buffer for DeviceID 0 (Thread 1)
[2019-03-06 18:12:45] Loading [graft] kernel for DEVICE BUS_ID[8]
[2019-03-06 18:12:45] ctx->Program for DeviceID 0 (Thread 1) loaded
[2019-03-06 18:12:45] Using fragments 16 for DeviceID 1 (Thread 2)
[2019-03-06 18:12:45] Using heavy_mode 1 for DeviceID 1 (Thread 2)
[2019-03-06 18:12:45] Using thread_delay 319 for DeviceID 1 (Thread 2)
[2019-03-06 18:12:46] Created OCL input buffer for DeviceID 1 (Thread 2)
[2019-03-06 18:12:46] Loading [graft] kernel for DEVICE BUS_ID[4]
[2019-03-06 18:12:46] ctx->Program for DeviceID 1 (Thread 2) loaded
[2019-03-06 18:12:46] Using fragments 16 for DeviceID 1 (Thread 3)
[2019-03-06 18:12:46] Using heavy_mode 1 for DeviceID 1 (Thread 3)
[2019-03-06 18:12:46] Using thread_delay 319 for DeviceID 1 (Thread 3)
[2019-03-06 18:12:46] Created OCL input buffer for DeviceID 1 (Thread 3)
[2019-03-06 18:12:46] Loading [graft] kernel for DEVICE BUS_ID[4]
[2019-03-06 18:12:46] ctx->Program for DeviceID 1 (Thread 3) loaded
[2019-03-06 18:12:46] Using fragments 8 for DeviceID 2 (Thread 4)
[2019-03-06 18:12:46] Using heavy_mode 1 for DeviceID 2 (Thread 4)
[2019-03-06 18:12:46] Using thread_delay 319 for DeviceID 2 (Thread 4)
[2019-03-06 18:12:46] Created OCL input buffer for DeviceID 2 (Thread 4)
[2019-03-06 18:12:46] Loading [graft] kernel for DEVICE BUS_ID[10]
[2019-03-06 18:12:46] ctx->Program for DeviceID 2 (Thread 4) loaded
[2019-03-06 18:12:46] Using fragments 8 for DeviceID 2 (Thread 5)
[2019-03-06 18:12:46] Using heavy_mode 1 for DeviceID 2 (Thread 5)
[2019-03-06 18:12:46] Using thread_delay 319 for DeviceID 2 (Thread 5)
[2019-03-06 18:12:46] Created OCL input buffer for DeviceID 2 (Thread 5)
[2019-03-06 18:12:46] Loading [graft] kernel for DEVICE BUS_ID[10]
[2019-03-06 18:12:46] ctx->Program for DeviceID 2 (Thread 5) loaded
[2019-03-06 18:12:46] Using fragments 8 for DeviceID 3 (Thread 6)
[2019-03-06 18:12:46] Using heavy_mode 1 for DeviceID 3 (Thread 6)
[2019-03-06 18:12:46] Using thread_delay 319 for DeviceID 3 (Thread 6)
[2019-03-06 18:12:46] Created OCL input buffer for DeviceID 3 (Thread 6)
[2019-03-06 18:12:46] Loading [graft] kernel for DEVICE BUS_ID[9]
[2019-03-06 18:12:46] ctx->Program for DeviceID 3 (Thread 6) loaded
[2019-03-06 18:12:46] Using fragments 8 for DeviceID 3 (Thread 7)
[2019-03-06 18:12:46] Using heavy_mode 1 for DeviceID 3 (Thread 7)
[2019-03-06 18:12:46] Using thread_delay 319 for DeviceID 3 (Thread 7)
[2019-03-06 18:12:47] Created OCL input buffer for DeviceID 3 (Thread 7)
[2019-03-06 18:12:47] Loading [graft] kernel for DEVICE BUS_ID[9]
[2019-03-06 18:12:47] ctx->Program for DeviceID 3 (Thread 7) loaded
[2019-03-06 18:12:47] Using fragments 8 for DeviceID 4 (Thread
[2019-03-06 18:12:47] Using heavy_mode 1 for DeviceID 4 (Thread
[2019-03-06 18:12:47] Using thread_delay 319 for DeviceID 4 (Thread
[2019-03-06 18:12:47] Created OCL input buffer for DeviceID 4 (Thread
[2019-03-06 18:12:47] Loading [graft] kernel for DEVICE BUS_ID[11]
[2019-03-06 18:12:47] ctx->Program for DeviceID 4 (Thread loaded
[2019-03-06 18:12:47] Using fragments 8 for DeviceID 4 (Thread 9)
[2019-03-06 18:12:47] Using heavy_mode 1 for DeviceID 4 (Thread 9)
[2019-03-06 18:12:47] Using thread_delay 319 for DeviceID 4 (Thread 9)
[2019-03-06 18:12:47] Created OCL input buffer for DeviceID 4 (Thread 9)
[2019-03-06 18:12:47] Loading [graft] kernel for DEVICE BUS_ID[11]
[2019-03-06 18:12:47] ctx->Program for DeviceID 4 (Thread 9) loaded
[2019-03-06 18:12:47] Using fragments 16 for DeviceID 5 (Thread 10)
[2019-03-06 18:12:47] Using heavy_mode 1 for DeviceID 5 (Thread 10)
[2019-03-06 18:12:47] Using thread_delay 319 for DeviceID 5 (Thread 10)
[2019-03-06 18:12:47] Created OCL input buffer for DeviceID 5 (Thread 10)
[2019-03-06 18:12:47] Loading [graft] kernel for DEVICE BUS_ID[1]
[2019-03-06 18:12:47] ctx->Program for DeviceID 5 (Thread 10) loaded
[2019-03-06 18:12:47] Using fragments 16 for DeviceID 5 (Thread 11)
[2019-03-06 18:12:47] Using heavy_mode 1 for DeviceID 5 (Thread 11)
[2019-03-06 18:12:47] Using thread_delay 319 for DeviceID 5 (Thread 11)
[2019-03-06 18:12:47] Created OCL input buffer for DeviceID 5 (Thread 11)
[2019-03-06 18:12:47] Loading [graft] kernel for DEVICE BUS_ID[1]
[2019-03-06 18:12:47] ctx->Program for DeviceID 5 (Thread 11) loaded
[2019-03-06 18:12:47] ADL initialised successfully!
[2019-03-06 18:12:47] Finished init of mining threads
[2019-03-06 18:12:48] Startup monitor detached
[2019-03-06 18:12:48] Socket initialiasation done
[2019-03-06 18:12:48] Gpu watchdog started
[2019-03-06 18:12:48] API disabled
[2019-03-06 18:12:48] json_send[237]: {"id":1,"jsonrpc": "2.0","method":"login","params":{"login":"FDFDuT3qk8QTQS1zCbypV4H5adGZ6d4nc9u8YeJXuG4RcEsszpHiy9gHXeoeJpY8n3PxKXVjX65E7aT bn3Z1Mdyz2CCoiLY","pass":"rig01","agent":"SRBMiner Cryptonight AMD GPU miner/1.8.0","rigid":""}}
[2019-03-06 18:12:48] json_receive[325]: {"id":1,"jsonrpc":"2.0","error":null,"result":{"id":"865414726783102","job":{"blob":"0c0ce7e2ffe305588e0fab6cfe0c537cfd512d3ca47a64b9ae47ed157e2578176aea05f9339d700 0000000110e178e18bee38bb316ebf80672d2e719518cca8b7d11b04d18e53ea769c07b02","job_id":"344965370390128","target":"8b4f0100","id":"865414726783102"},"status":"OK"}}
[2019-03-06 18:12:48] Connected to testnet.graft.community:4255
[2019-03-06 18:12:48] sock_ready: User logged in
[2019-03-06 18:12:48] pool_have_job: Pool sent a new job[1] (ID: 344965370390128)
[2019-03-06 18:13:00] miner_result: Sending user result to pool
[2019-03-06 18:13:00] json_send[200]: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"865414726783102","job_id":"344965370390128","nonce":"5b0a0000","result":"2b038093d75dc6102dd10d2573dfc9273c6b4fa446923272befe77ec73d00000"}}
[2019-03-06 18:13:00] json_receive[62]: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2019-03-06 18:13:00] miner_result: Pool accepted result 0x0000D073 for job[1] [164ms]
[2019-03-06 18:13:03] miner_result: Sending user result to pool
[2019-03-06 18:13:03] json_send[200]: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"865414726783102","job_id":"344965370390128","nonce":"b45b55d5","result":"ef1d75892503a991292848348275b66d9add0fbb1c162bbcda3bbb80769c0000"}}
[2019-03-06 18:13:03] json_receive[62]: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2019-03-06 18:13:03] miner_result: Pool accepted result 0x00009C76 for job[1] [159ms]
[2019-03-06 18:13:05] json_receive[275]: {"jsonrpc":"2.0","method":"job","params":{"blob":"0c0ce7e2ffe305588e0fab6cfe0c537cfd512d3ca47a64b9ae47ed157e2578176aea05f9339d700 0000000ad505ac592cbdb9708c9cc5a7034184f12482bbfb96fdb3d4ad7c38f91f744d402","job_id":"557905185659154","target":"c5a70000","id":"865414726783102"}}
[2019-03-06 18:13:05] pool_have_job: Pool sent a new job[2] (ID: 557905185659154)
[2019-03-06 18:13:51] ADL2_OverdriveN_Temperature_Get for ADL index 33 failed.
[2019-03-06 18:13:51] ADL2_OverdriveN_FanControl_Get for ADL index 33 failed.
[2019-03-06 18:13:51] hashrate: GPU0: 526 H/s [T:0c][BUS:8]
[2019-03-06 18:13:51] hashrate: GPU1: 626 H/s [T:49c][BUS:4]
[2019-03-06 18:13:51] hashrate: GPU2: 265 H/s [T:45c][BUS:10]
[2019-03-06 18:13:51] ADL2_OverdriveN_Temperature_Get for ADL index 27 failed.
[2019-03-06 18:13:51] ADL2_OverdriveN_FanControl_Get for ADL index 27 failed.
[2019-03-06 18:13:51] hashrate: GPU3: 552 H/s [T:0c][BUS:9]
[2019-03-06 18:13:51] ADL2_OverdriveN_Temperature_Get for ADL index 21 failed.
[2019-03-06 18:13:51] ADL2_OverdriveN_FanControl_Get for ADL index 21 failed.
[2019-03-06 18:13:51] hashrate: GPU4: 551 H/s [T:0c][BUS:11]
[2019-03-06 18:13:51] hashrate: GPU5: 289 H/s [T:43c][BUS:1]
[2019-03-06 18:13:51] hashrate: Total: 2809 H/s
[2019-03-06 18:14:26] stats: Algo: graft
[2019-03-06 18:14:26] stats: Mining time: 0 days, 0 hours, 1 minutes, 38 seconds
[2019-03-06 18:14:26] stats: Pool: testnet.graft.community:4255
[2019-03-06 18:14:26] stats: Connected since: 2019-03-06 18:12:48
[2019-03-06 18:14:26] stats: Last job received : 80 seconds ago
[2019-03-06 18:14:26] stats: Accepted(Stale)/Total shares: 2[0]/2

[2019-03-06 18:14:26] stats: Average time to find share: 48 seconds
[2019-03-06 18:14:28] ADL2_OverdriveN_Temperature_Get for ADL index 33 failed.
[2019-03-06 18:14:28] ADL2_OverdriveN_FanControl_Get for ADL index 33 failed.
[2019-03-06 18:14:28] hashrate: GPU0: 526 H/s [T:0c][BUS:8]
[2019-03-06 18:14:28] hashrate: GPU1: 626 H/s [T:50c][BUS:4]
[2019-03-06 18:14:28] hashrate: GPU2: 264 H/s [T:46c][BUS:10]
[2019-03-06 18:14:28] ADL2_OverdriveN_Temperature_Get for ADL index 27 failed.
[2019-03-06 18:14:28] ADL2_OverdriveN_FanControl_Get for ADL index 27 failed.
[2019-03-06 18:14:28] hashrate: GPU3: 552 H/s [T:0c][BUS:9]
[2019-03-06 18:14:28] ADL2_OverdriveN_Temperature_Get for ADL index 21 failed.
[2019-03-06 18:14:28] ADL2_OverdriveN_FanControl_Get for ADL index 21 failed.
[2019-03-06 18:14:28] hashrate: GPU4: 552 H/s [T:0c][BUS:11]
[2019-03-06 18:14:28] hashrate: GPU5: 291 H/s [T:45c][BUS:1]
[2019-03-06 18:14:28] hashrate: Total: 2811 H/s

[doktor83]

my rig just freezes and reboots with the new version 1.8.0...cards are rx550.
it works fine with 1.7.9

Give more info, "just freezes" isnt too much info, you must admit that..

[GKumaran]

New algorithm Hashrates:
Run on 6 Vega 64 in 18.6.1, and averaged to single card numbers
All run using default SRB setting -> via command line, thx Doc
All run in Same overclock setting -> stable
So lower power and higher HR can also be acheived

Algorithm	Hashrate	Power	Notes
Graft	2627	215

[nordmann666]

New algorithm Hashrates:
Run on 6 Vega 64 in 18.6.1, and averaged to single card numbers
All run using default SRB setting -> via command line, thx Doc
All run in Same overclock setting -> stable
So lower power and higher HR can also be acheived

Algorithm	Hashrate	Power	Notes
Graft	15765	215

-[/td][/tr][/table]

you should post your v8 hs and power consumption for comparison...or your oc settings

[swongsR1thing]

Has anyone tried 19.x.x drivers?
I plan to reinstall win10 and go with 19 drivers + 1.7.9 srbminer.

[akvilon888]

my rig just freezes and reboots with the new version 1.8.0...cards are rx550.
it works fine with 1.7.9

Give more info, "just freezes" isnt too much info, you must admit that..

already tried new version on 2 my rigs, all are on rx550s, i edit v4 to v8 in start.bat, miner starts, compiles kernels but then just freezes and rig goes to reboot...should i edit something else except v4>v8 ?? i have 18.6.1&18.5.2 radeon drivers and win10 1803.

[doktor83]

my rig just freezes and reboots with the new version 1.8.0...cards are rx550.
it works fine with 1.7.9

Give more info, "just freezes" isnt too much info, you must admit that..

already tried new version on 2 my rigs, all are on rx550s, i edit v4 to v8 in start.bat, miner starts, compiles kernels but then just freezes and rig goes to reboot...should i edit something else except v4>v8 ?? i have 18.6.1&18.5.2 radeon drivers and win10 1803.

Try setting up gpu's with gpu_conf by hand, maybe you need to use lower intensity values than the auto setup gives.

[GKumaran]

New algorithm Hashrates:
Run on 6 Vega 64 in 18.6.1, and averaged to single card numbers
All run using default SRB setting -> via command line, thx Doc
All run in Same overclock setting -> stable
So lower power and higher HR can also be acheived

Algorithm	Hashrate	Power	Notes
Graft	2627	215

you should post your v8 hs and power consumption for comparison...or your oc settings

Full post : https://bitcointalk.org/index.php?topic=3167363.msg49891145#msg49891145

[smen13]

my rig just freezes and reboots with the new version 1.8.0...cards are rx550.
it works fine with 1.7.9

Give more info, "just freezes" isnt too much info, you must admit that..

already tried new version on 2 my rigs, all are on rx550s, i edit v4 to v8 in start.bat, miner starts, compiles kernels but then just freezes and rig goes to reboot...should i edit something else except v4>v8 ?? i have 18.6.1&18.5.2 radeon drivers and win10 1803.

Try setting up gpu's with gpu_conf by hand, maybe you need to use lower intensity values than the auto setup gives.

Yes its true,system freezes, same thing to me using rx550 2GB, i have also rx550 4GB and works fine, maybe 2GB Gpu's are out.

[swongsR1thing]

Mining turtle coin is a nightmare with vega64 on win10 & srbminer. I cant get it to work.
Win build 1809
Drivers: 18.6.1
Config: 6x vega64, 4gb ram, celeron

I can only pray that these settings will hold for monero fork.

[doktor83]

my rig just freezes and reboots with the new version 1.8.0...cards are rx550.
it works fine with 1.7.9

Give more info, "just freezes" isnt too much info, you must admit that..

already tried new version on 2 my rigs, all are on rx550s, i edit v4 to v8 in start.bat, miner starts, compiles kernels but then just freezes and rig goes to reboot...should i edit something else except v4>v8 ?? i have 18.6.1&18.5.2 radeon drivers and win10 1803.

Try setting up gpu's with gpu_conf by hand, maybe you need to use lower intensity values than the auto setup gives.

Yes its true,system freezes, same thing to me using rx550 2GB, i have also rx550 4GB and works fine, maybe 2GB Gpu's are out.

They are not out they probably need lower intensity...