hunghcm
Newbie
 Offline
Activity: 49
Merit: 0
|
 |
March 11, 2019, 01:41:38 PM |
|
its cn/r on nicehash, other rigs mines fine, maybe miner set wrong intesnity again?
No it's not intensity related, pool just isn't sending you the block height parameter, and without that miner can't work with cn/r. If you could give me a part from the logfile from 2019-03-10 00:20:44 it would be really helpful do i need to set nicehash true in the pools txt? already deleted logs( you can but it's not a must because miner will recognise it's a nicehash pool and it will enable that parameter automatically. Ok, so that happened only once? Since then that machine is working ok ? it seems now its ok, i set my old intensity parameters for my 480s cards, because auto was 71/1, now i set 68/8 and for some time its mines ok, i will sent you log file if it will be one more time. i reduce i 68 and 66, my rigs can not run at at stable with normal v4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
You get merit points when someone likes your post enough to give you some. And for every 2 merit points you receive, you can send 1 merit point to someone else!
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
bobymoore
Newbie
Offline
Activity: 61
Merit: 0
|
|
March 11, 2019, 03:23:06 PM |
|
I don't see my miner online in nanopool with srb miner,how can I configure it to see my worker online?
|
|
|
|
|
karim_hassan777
Newbie
Offline
Activity: 58
Merit: 0
|
|
March 11, 2019, 03:47:37 PM |
|
mining monero
it gives some error with something like " share height is not correct "
any solution guys
i use latest version
|
|
|
|
|
|
UnclWish
|
|
March 12, 2019, 04:47:29 AM
Last edit: March 12, 2019, 05:57:36 AM by UnclWish |
|
Can't reach TR miner speed on SRB cnr algo on 2nd of my RX 580 8G. On other card speed is the same. But on Sapphire TR miner gives 1040 h/s on cnr, SRB max - 1001 h/s. I think that thread_delay can help. I tried some changing in it, but not successful...
|
|
|
|
|
|
Marvell2
|
|
March 12, 2019, 04:50:23 AM |
|
what settings for a fury nano ? I only get 400 mhs with v4 on those , i use to get over 900 on v8
|
|
|
|
|
uliinnsbruck
Newbie
Offline
Activity: 4
Merit: 0
|
|
March 12, 2019, 06:21:41 AM |
|
hello,
can't find an answer for that.
What is the difference between
normalv4_64
and
normalv4
Thank you
|
|
|
|
|
badral07
Newbie
Offline
Activity: 8
Merit: 0
|
|
March 12, 2019, 08:38:26 AM |
|
Hello Doktor,
I'm using the latest version 1.8.0 since the fork. But suddenly I'm facing an issue which is my miner keeps crashing and close itself after like 3 or 4 hours later. After that happens, when you click on the start.bat file again it opens but immediately closes again. The only solution for them is to restart the computer otherwise it won't work. Can you help me?
|
|
|
|
|
jazz1984
Jr. Member
Offline
Activity: 392
Merit: 5
|
|
March 12, 2019, 02:22:05 PM |
|
Hi guys! Is Srb still actual for rx550 2 Gb? How much hashes i can recieve on new monero algo? thx a lot.
|
|
|
|
|
akvilon888
Newbie
Offline
Activity: 19
Merit: 0
|
|
March 12, 2019, 03:28:57 PM |
|
Hi guys! Is Srb still actual for rx550 2 Gb? How much hashes i can recieve on new monero algo? thx a lot.
~the same as on v8 ~ 460hs |
|
|
|
|
gyIQ
Newbie
Offline
Activity: 20
Merit: 0
|
|
March 13, 2019, 08:41:07 AM
Last edit: March 13, 2019, 11:43:28 AM by gyIQ |
|
Hello, Used 173 and 175 with dual vega56 without any problem. Now got the following issue with 179 and 180 as well: second gpu use only 1 thread. [2019-03-13 09:37:17] GPU0 : 1782 H/s [T: 55c, RPM: 2938, CC: 1402 MHz, MC: 925 MHz][BUS:6] [2019-03-13 09:37:17] GPU1 : 990 H/s [T: 47c, RPM: 2842, CC: 1402 MHz, MC: 925 MHz][BUS:3] [2019-03-13 09:37:17] Total: 2772 H/s I've just modified the pool.txt with my pool data and that's all. Any idea what is going on? With 173 these cards made 3500+ Hs. Initializing OpenCL devices, please wait...
GPU0: Radeon RX Vega [gfx900] [8176 MB][I: 112.0][W: 16][T: 2][F: 4][BUS: 6]
GPU1: Radeon RX Vega [gfx900] [8176 MB][I: 112.0][W: 16][T: 2][F: 4][BUS: 3]
-----------------------------------------------------------------------------
SRBMiner Cryptonight AMD GPU miner 1.8.0
DevFee ~0.85%
Press 's' to display stats
Press 'h' to display hashrate
Press 'r' to reload pools
Press 'p' to switch to the next pool
Press 'o' to switch to the previous pool
Press 0-9 to disable/enable GPU while mining
-----------------------------------------------------------------------------
Recommended drivers : Adrenalin 18.5.1, 18.5.2 or 18.6.1
Algorithm : Cryptonight V4 (R)
Algo switching : disabled
Startup monitor : enabled
Gpu watchdog : enabled [normal mode]
Coin forking : disabled
[2019-03-13 09:44:48] Pools defined -> 2
[2019-03-13 09:44:48] Loading [normalv4] kernel for DEVICE BUS_ID[6]
[2019-03-13 09:44:48] Loading [normalv4] kernel for DEVICE BUS_ID[6]
[2019-03-13 09:44:49] Loading [normalv4] kernel for DEVICE BUS_ID[3]
[2019-03-13 09:44:49] Loading [normalv4] kernel for DEVICE BUS_ID[3]
[2019-03-13 09:44:49] ADL initialised successfully
[2019-03-13 09:44:49] Connected to xmr-eu1.nanopool.org:14444
[2019-03-13 09:44:49] User logged in
[2019-03-13 09:44:49] Pool difficulty: 120001
[2019-03-13 09:44:49] Pool sent a new job[1], block height 1789707 (ID: 5886) |
|
|
|
|
gyIQ
Newbie
Offline
Activity: 20
Merit: 0
|
|
March 13, 2019, 11:37:40 AM |
|
driver reinstalled, now all ok.
[2019-03-13 12:36:31] GPU0 : 1774 H/s [T: 42c, RPM: 2894, CC: 1402 MHz, MC: 925 MHz][BUS:6]
[2019-03-13 12:36:31] GPU1 : 1736 H/s [T: 43c, RPM: 2802, CC: 1402 MHz, MC: 925 MHz][BUS:3]
[2019-03-13 12:36:31] Total: 3510 H/s
Other: Any chance to create a linux version and integrate it to HIVEOS? Would love to mine with SRB on HIVE.
|
|
|
|
|
ingyenfrag
Newbie
Offline
Activity: 84
Merit: 0
|
|
March 13, 2019, 03:25:57 PM |
|
driver reinstalled, now all ok.
[2019-03-13 12:36:31] GPU0 : 1774 H/s [T: 42c, RPM: 2894, CC: 1402 MHz, MC: 925 MHz][BUS:6]
[2019-03-13 12:36:31] GPU1 : 1736 H/s [T: 43c, RPM: 2802, CC: 1402 MHz, MC: 925 MHz][BUS:3]
[2019-03-13 12:36:31] Total: 3510 H/s
Other: Any chance to create a linux version and integrate it to HIVEOS? Would love to mine with SRB on HIVE.
Do they have hynix HBM? My cards with samsung HBM hash around 1945 H/s |
|
|
|
|
korz
Newbie
Offline
Activity: 2
Merit: 0
|
 |
March 13, 2019, 05:26:02 PM |
|
hello ,
i'm new on SRBminer ,
and i have a little problem .
all is good except this message :
WARNING: Linking two modules of different data layouts!
WARNING: Linking two modules of different target triples: input.bc: 'amdil64-pc-unknown-amdopencl' and 'amdil-pc-unknown-amdopencl'
and this other little prob ... No monitoring ...
[2019-03-13 18:22:31] GPU0 : 372 H/s [T: 0c, RPM: 0, CC: 0 MHz, MC: 0 MHz][BUS:5]
[2019-03-13 18:22:31] GPU1 : 378 H/s [T: 0c, RPM: 0, CC: 0 MHz, MC: 0 MHz][BUS:4]
[2019-03-13 18:22:31] GPU2 : 348 H/s [T: 0c, RPM: 0, CC: 0 MHz, MC: 0 MHz][BUS:7]
[2019-03-13 18:22:31] GPU3 : 372 H/s [T: 0c, RPM: 0, CC: 0 MHz, MC: 0 MHz][BUS:1]
[2019-03-13 18:22:31] Total: 1470 H/s
if someone can explan me ...
thx a lot
|
|
|
|
|
|
doktor83 (OP)
|
|
March 14, 2019, 06:03:49 AM |
|
hello,
can't find an answer for that.
What is the difference between
normalv4_64
and
normalv4
Thank you
Those are two different algorithms, normalv4_64 isn't used by any coin atm.
all is good except this message :
WARNING: Linking two modules of different data layouts!
WARNING: Linking two modules of different target triples: input.bc: 'amdil64-pc-unknown-amdopencl' and 'amdil-pc-unknown-amdopencl'
and this other little prob ... No monitoring ...
[2019-03-13 18:22:31] GPU0 : 372 H/s [T: 0c, RPM: 0, CC: 0 MHz, MC: 0 MHz][BUS:5]
[2019-03-13 18:22:31] GPU1 : 378 H/s [T: 0c, RPM: 0, CC: 0 MHz, MC: 0 MHz][BUS:4]
[2019-03-13 18:22:31] GPU2 : 348 H/s [T: 0c, RPM: 0, CC: 0 MHz, MC: 0 MHz][BUS:7]
[2019-03-13 18:22:31] GPU3 : 372 H/s [T: 0c, RPM: 0, CC: 0 MHz, MC: 0 MHz][BUS:1]
[2019-03-13 18:22:31] Total: 1470 H/s
if someone can explan me ...
thx a lot
You can dismiss those messages, those are not affecting your mining speeds. Regarding the monitoring, try this parameter : "adl_type" : 1 or 2 , 1 - USE OVERDRIVEN , 2 - USE OVERDRIVE 5. Default is 1 if not set. Option 2 (Overdrive 5) is suitable for older cards Try setting it to 2 |
|
|
|
silentskill
Newbie
Offline
Activity: 3
Merit: 0
|
|
March 14, 2019, 06:47:50 AM |
|
Hello doktor,
first of all - thank you for your hard work and producing such a great miner.
Since the first days after fork srb miner unfortunately becomes unstable now. I had 3 crash downs in the last 48 hours with my Radeon RX Vegas 64. Something must have changed since the first days after the fork, Sun/Mon/Tue it was stable. Now it closes in the middle of the night for example. Hash rate is although slighly less than directly after fork ~ around 50 h/s (2000 > 1950).
Iam using the latest drivers.
|
|
|
|
|
|
doktor83 (OP)
|
|
March 14, 2019, 07:21:55 AM |
|
Hello doktor,
first of all - thank you for your hard work and producing such a great miner.
Since the first days after fork srb miner unfortunately becomes unstable now. I had 3 crash downs in the last 48 hours with my Radeon RX Vegas 64. Something must have changed since the first days after the fork, Sun/Mon/Tue it was stable. Now it closes in the middle of the night for example. Hash rate is although slighly less than directly after fork ~ around 50 h/s (2000 > 1950).
Iam using the latest drivers.
The new algorithm isnt same as V8 was before, so you should experiment with your OC (clock/mem/voltage) settings. Hashrate can vary a little bit from block to block, because of the random math that was added in the new algo CN/R. |
|
|
|
gyIQ
Newbie
Offline
Activity: 20
Merit: 0
|
|
March 14, 2019, 08:07:10 AM |
|
Do they have hynix HBM?
My cards with samsung HBM hash around 1945 H/s
Yes, Hynix, hogy a fene egye meg. |
|
|
|
|
|
big_daddy
|
|
March 14, 2019, 08:19:31 AM |
|
@doktor83
Is possible to merge Your miner with ZIL miner? Something like a "dual mining"
The idea is to make a script that will start ZIL at their start POW epoch (on every *99 block, ~every 2 hours), mine ZIL for 1-2 minutes, than restart SRBminer and mine the Cryptonight coin, or even without stopping for the 1-2 minutes for the GPUs with 6GB & more, cause there is enough space to upload the ZIL DAG file
I'm doing it using 3 bat files, but sometimes it the miner stucks, it will be great if some developer/programmer could make a more stable script
Best regards
|
If you don't believe it or don't get it, I don't have the time to try to convince you, sorry.
|
|
|
gyIQ
Newbie
Offline
Activity: 20
Merit: 0
|
|
March 14, 2019, 08:47:16 AM |
|
Doktor,
Any chance to create a linux version and integrate it to HIVEOS? Would love to mine with SRB on HIVE.
|
|
|
|
|
akvilon888
Newbie
Offline
Activity: 19
Merit: 0
|
|
March 14, 2019, 11:42:17 AM |
|
dok, having a problem with srb, the miner closes itself, have the same problem with 3-4 rigs...it closes randomly at any time, no matter what cards or driver, it closes on vegas 56/64 and the same on rx550...can you do something or recommend ? never had this problem before 1.8.0, and its a very disappointing thing, lost a lot of time without rigs working especially at night...
|
|
|
|
|
|
